thebrotherofasis
December 21st, 2009, 03:00 AM
I noticed the chess database program "Scid" is way more up-to-date from source than in the repos.
So, I am trying to install it by following the steps below, but I am stuck after doing ./configure
1. Download it at http://scid.sourceforge.net/download.html
2. Extract it
cd ~/Downloads/
tar xjvf scid-4.0.tar.bz2
mv scid /usr/local/src/
3. Compile and install
cd /usr/local/src/scid
./configure
I get the following
configure: Makefile configuration program for Scid
Renaming "Makefile" to "Makefile.bak"
Tcl/Tk version: 8.5
Your operating system is: Linux 2.6.31-16-generic
Location of "tcl.h": not found
Location of "tk.h": not found
Location of Tcl 8.5 library: /usr/lib
Location of Tk 8.5 library: /usr/lib
Location of X11 library: /usr/lib
Checking if your system already has zlib installed: no.
Not all settings could be determined!
The default Makefile was written.
You will need to edit it before you can compile Scid.
If I do
make
I get
make: *** [src/stored.o] Error 1
The thing is I really don't know if this is a problem of dependencies or something else, since it says
The default Makefile was written.
You will need to edit it before you can compile Scid
I tried installing
sudo apt-get remove zlibc
But no luck.
:confused:
When I
gedit Makefile
I see
##### Makefile for Scid for Unix operating systems.
### Compiler: Most Unix systems use g++ for compiling and linking.
#
COMPILE = g++
CC = gcc
LINK = g++
DESTDIR =
# BINDIR: where the Scid programs are copied for "make install".
#
BINDIR = /usr/local/bin
# SHAREDIR: where scid.eco is copied for "make install".
#
SHAREDIR = /usr/local/share/scid
### TCL_VERSION: Set this according to the version of Tcl/Tk you have
# installed that you want Scid to use: 8.0, 8.1, 8.2, 8.3, etc.
#
TCL_VERSION = 8.5
# TCL_INCLUDE, TCL_LIBRARY, TK_LIBRARY: these are the compiler options
# needed for linking Scid with Tcl/Tk. The program "./configure"
# will try to determine them automatically, but if it cannot, you
# can use the examples below for help in setting these variables.
#
# Sorry, "./configure" was not successful. The default settings are:
#
TCL_INCLUDE = -I/usr/include
TCL_LIBRARY = -L/usr/lib -ltcl$(TCL_VERSION) -ldl
TK_LIBRARY = $(TCL_LIBRARY) -ltk$(TCL_VERSION) -L/usr/X11R6/lib -lX11
### Here are other commonly used settings for the Tcl/Tk compiler options:
### Linux (Red Hat and other distributions):
# TCL_INCLUDE = -I /usr/include
# TCL_LIBRARY = -L /usr/lib -ltcl$(TCL_VERSION) -ldl
# TK_LIBRARY = $(TCL_LIBRARY) -ltk$(TCL_VERSION) -L /usr/X11R6/lib -lX11
### Solaris:
# TCL_INCLUDE = -I /usr/local/tcl/include
# TCL_LIBRARY = -L /usr/local/tcl/lib -ltcl$(TCL_VERSION) -ldl
# TK_LIBRARY = $(TCL_LIBRARY) -ltk$(TCL_VERSION)
# Someone sent me these settings for SuSE Linux 6.1:
### Linux (SuSE distribution):
# TCL_INCLUDE = -I /usr/X11R6/include
# TCL_LIBRARY = -L /usr/lib -ltcl$(TCL_VERSION) -ldl
# TK_LIBRARY = $(TCL_LIBRARY) -L /usr/X11R6/lib -ltk$(TCL_VERSION) -lX11
# Someone sent me these settings for FreeBSD with Tcl/Tk 8.0:
### FreeBSD:
# TCL_INCLUDE = -I /usr/local/include/tcl8.0 -I /usr/local/include/tk8.0
# TCL_LIBRARY = -L /usr/local/lib -ltcl80 -ldl
# TK_LIBRARY = $(TCL_LIBRARY) -ltk80 -L /usr/X11/lib -lX11
########################################
### Compiler options:
### TB: Using Nalimov tablebases with Scid. Use "TB = -DSCID_USE_TB" for
# tablebase support, or just "TB = " for no tablebase capability.
# Use "TB = -DSCID_USE_TB -DT41_INCLUDE" to include use of 4-1
# (King + 3 pieces vs lone king) tablebases.
#
TB = -DSCID_USE_TB -DT41_INCLUDE
### SCIDFLAGS: Scid customization flags.
# Use -DZLIB if your system does not have zlib and you need
# to include the code in the src/zlib directory.
# The default is to use the system zlib library.
#
SCIDFLAGS = -DZLIB
### OPTIMIZE: Optimization options for C++ compiler.
# -O4 is the most optimization for g++. I have found -O2 to do
# just as well, but someone reported a noticable difference in speed
# between -O4 and -O2 so the default here is -O4.
# On some systems, adding "-fno-rtti" and "-fno-exceptions" produces
# smaller, faster programs since Scid does not use those C++ features.
#
OPTIMIZE = -O4 -fno-rtti -fno-exceptions
### DEBUG: Defining the macro ASSERTIONS will turn on assertions, which
# helps to track bugs after modifications, but the programs will run
# a little faster with assertions turned off.
#
DEBUG = #-DASSERTIONS
### WARNINGS: I always compile with all warnings on (-Wall), and all the
# files should compile warning-free using g++.
#
WARNINGS = -Wall
### PROFILE: Set this to "-pg" for profiling in g++ and gcc.
#
PROFILE =
### CPP_FLAGS: Flags for C++ compilation.
#
CPP_FLAGS = $(PROFILE) $(OPTIMIZE) $(WARNINGS) $(DEBUG) $(SCIDFLAGS)
### CFLAGS: Flags for C compilation (only used for compiling zlib).
#
CFLAGS = -O2 -Wall $(PROFILE)
### LANGUAGES: List of additional Tcl files to include in Scid for
# multi-language menu support.
# By default, it is all the contributed languages, but you
# can reduce the size of the Scid program by only specifying
# the languages you want supported.
#
LANGUAGES = tcl/lang/deutsch.tcl tcl/lang/francais.tcl tcl/lang/italian.tcl tcl/lang/nederlan.tcl tcl/lang/spanish.tcl tcl/lang/portbr.tcl tcl/lang/swedish.tcl tcl/lang/norsk.tcl tcl/lang/polish.tcl tcl/lang/czech.tcl tcl/lang/hungary.tcl tcl/lang/serbian.tcl tcl/lang/catalan.tcl tcl/lang/russian.tcl
################################################## ##########
#
# You should not need to edit anything below this line.
#
################################################## ##########
### EXECS: executable programs compiled from C++ files.
# Note: scidt and eco2epd are obsolete and not compiled by default.
# PG : put back scidt has it appears to be useful in certain cases
#
EXECS= pgnscid tkscid tcscid scmerge scidlet scidt
### SCIDOBJS: not all the .o files that make up Scid, just the standard ones
# that most of the programs include.
#
SCIDOBJS= src/misc.o src/index.o src/date.o src/namebase.o src/position.o \
src/game.o src/gfile.o src/matsig.o src/bytebuf.o src/textbuf.o \
src/myassert.o src/stralloc.o src/mfile.o src/dstring.o src/pgnparse.o \
src/stored.o src/movelist.o \
src/polyglot/attack.o src/polyglot/board.o src/polyglot/book.o \
src/polyglot/book_make.o src/polyglot/book_merge.o src/polyglot/colour.o \
src/polyglot/fen.o src/polyglot/game.o src/polyglot/hash.o \
src/polyglot/io.o src/polyglot/line.o src/polyglot/list.o src/polyglot/main.o src/polyglot/move.o \
src/polyglot/move_do.o src/polyglot/move_gen.o src/polyglot/move_legal.o src/polyglot/option.o \
src/polyglot/parse.o src/polyglot/pgn.o src/polyglot/piece.o src/polyglot/random.o \
src/polyglot/san.o src/polyglot/search.o src/polyglot/square.o src/polyglot/util.o
### ZLIBOBJS: object files in the zlib compression library.
#
ZLIBOBJS= src/zlib/adler32.o src/zlib/compress.o src/zlib/crc32.o \
src/zlib/gzio.o src/zlib/uncompr.o src/zlib/deflate.o src/zlib/trees.o \
src/zlib/zutil.o src/zlib/inflate.o src/zlib/infblock.o \
src/zlib/inftrees.o src/zlib/infcodes.o src/zlib/infutil.o \
src/zlib/inffast.o
### ZLIB: Should be "-lz" if your system has zlib, "" otherwise.
#
ZLIB =
### OBJS: Will be "$(SCIDOBJS)", "$(POLYGLOTOBJS)", and also "$(ZLIBOBJS)" if they are
# needed on your system.
OBJS= $(SCIDOBJS) $(ZLIBOBJS)
### TCLS: all the .tcl files that make up "scid".
#
TCLS= \
tcl/start.tcl \
tcl/config.tcl \
tcl/bitmaps.tcl \
tcl/language.tcl \
tcl/utils.tcl \
tcl/utils/date.tcl tcl/utils/font.tcl tcl/utils/graph.tcl tcl/utils/history.tcl \
tcl/utils/pane.tcl tcl/utils/sound.tcl tcl/utils/string.tcl tcl/utils/tooltip.tcl \
tcl/utils/validate.tcl tcl/utils/win.tcl \
tcl/misc/misc.tcl tcl/htext.tcl \
tcl/file.tcl \
tcl/file/finder.tcl tcl/file/bookmark.tcl tcl/file/recent.tcl tcl/file/epd.tcl \
tcl/file/spellchk.tcl tcl/file/maint.tcl \
tcl/edit.tcl \
tcl/game.tcl \
tcl/game/browser.tcl \
tcl/windows.tcl \
tcl/windows/gamelist.tcl tcl/windows/pgn.tcl tcl/windows/book.tcl \
tcl/windows/comment.tcl tcl/windows/eco.tcl \
tcl/windows/stats.tcl tcl/windows/tree.tcl tcl/windows/crosstab.tcl \
tcl/windows/pfinder.tcl tcl/windows/tourney.tcl tcl/windows/switcher.tcl \
tcl/search/search.tcl \
tcl/search/board.tcl tcl/search/header.tcl tcl/search/material.tcl \
tcl/contrib/ezsmtp/ezsmtp.tcl \
tcl/tools/email.tcl \
tcl/tools/import.tcl \
tcl/tools/optable.tcl tcl/tools/preport.tcl tcl/tools/pinfo.tcl \
tcl/tools/analysis.tcl tcl/tools/wbdetect.tcl \
tcl/tools/reper.tcl tcl/tools/graphs.tcl tcl/tools/tablebase.tcl tcl/tools/ptracker.tcl \
tcl/help/help.tcl tcl/help/tips.tcl \
tcl/menus.tcl tcl/board.tcl tcl/move.tcl tcl/main.tcl tcl/tools/correspondence.tcl \
tcl/lang/english.tcl $(LANGUAGES) \
tcl/tools/uci.tcl tcl/end.tcl tcl/tools/tacgame.tcl tcl/tools/sergame.tcl tcl/tools/calvar.tcl tcl/tools/fics.tcl tcl/tools/opening.tcl tcl/tools/tactics.tcl tcl/tools/reviewgame.tcl tcl/utils/metadata.tcl tcl/tools/inputengine.tcl tcl/tools/novag.tcl tcl/misc/flags.tcl
### SCRIPTS:
# Small extra programs. Most are written in Tcl using tcscid, but
# a few contributed ones may be in Python or other languages.
#
SCRIPTS= sc_addmove sc_epgn sc_spell sc_eco sc_import sc_remote sc_tree scidpgn pgnfix spliteco spf2spi
####################
### Type "make" or "make all" to make all programs:
#
all: all_scid all_engines
all_scid: scid $(SCRIPTS) $(EXECS)
all_engines: phalanx-scid toga
phalanx-scid:
cd engines/phalanx-scid/ && $(MAKE) && cd ../../
toga:
cd engines/togaII1.2.1a/src/ && $(MAKE) && cd ../../
### To copy all executables to $BINDIR, with read and execute permission
# for all users, and put extra files in $SHAREDIR, type "make install".
#
install: install_scid install_engines
install_scid: all_scid
install -m 755 -d $(DESTDIR)$(SHAREDIR)
install -m 755 -d $(DESTDIR)$(BINDIR)
install -m 755 -d $(DESTDIR)$(SHAREDIR)/data/
install -m 755 scid $(SCRIPTS) $(EXECS) $(DESTDIR)$(BINDIR)
install -m 644 -p scid.eco $(DESTDIR)$(SHAREDIR)/data/
install -m 755 -d $(DESTDIR)$(SHAREDIR)/books
install -m 666 ./books/*.* $(DESTDIR)$(SHAREDIR)/books/
install -m 755 -d $(DESTDIR)$(SHAREDIR)/bases
install -m 666 ./bases/*.* $(DESTDIR)$(SHAREDIR)/bases/
install -m 755 -d $(DESTDIR)$(SHAREDIR)/html
cp -r ./html/* $(DESTDIR)$(SHAREDIR)/html/
install_engines: all_engines
install -m 755 -d $(SHAREDIR)/engines
install -m 755 -d $(SHAREDIR)/engines/phalanx-scid
install ./engines/phalanx-scid/phalanx-scid $(SHAREDIR)/engines/phalanx-scid
install -m 755 -d $(SHAREDIR)/engines/togaII1.2.1a
install ./engines/togaII1.2.1a/src/togaII $(SHAREDIR)/engines/togaII1.2.1a/
uninstall:
rm -rf $(SHAREDIR)/engines
rm -rf $(SHAREDIR)/books
rm -rf $(SHAREDIR)/bases
rm -rf $(SHAREDIR)/data/
rm -f $(SHAREDIR)/data/scid.eco
rm -f $(BINDIR)/scid $(BINDIR)/sc_addmove $(BINDIR)/sc_epgn
rm -f $(BINDIR)/sc_spell $(BINDIR)/sc_eco $(BINDIR)/sc_import
rm -f $(BINDIR)/sc_remote $(BINDIR)/sc_tree $(BINDIR)/scidpgn
rm -f $(BINDIR)/pgnfix $(BINDIR)/spliteco
rm -f $(BINDIR)/pgnscid $(BINDIR)/tkscid $(BINDIR)/tcscid
rm -f $(BINDIR)/scmerge $(BINDIR)/scidlet
rm -rf $(SHAREDIR)/html
### To remove Scid files placed in the BINDIR and SHAREDIR directories,
# type "make distclean".
#
distclean:
cd $(BINDIR) && rm -f $(EXECS) $(SCRIPTS)
-rm -f $(SHAREDIR)/scid.eco
### To remove object and executable files: type "make clean".
#
clean:
rm -f game.* learn* tkscid.so tkscid.dll position.* src/*.o src/zlib/*.o src/zlib/*.a src/polyglot/*.o $(EXECS) scid $(SCRIPTS)
cd engines/phalanx-scid/ && make clean && cd ../../
cd engines/togaII1.2.1a/src/ && make clean && cd ../../../
cd pocket/toga/src/ && make clean && cd ../../../
cd pocket/toga134/src/ && make clean && cd ../../../
# cd pocket/toga141SE/src/ && make clean && cd ../../../
cd pocket/fruit_21/src/ && make clean && cd ../../../
cd pocket/gambitfruit/src/ && make clean && cd ../../../
cd pocket/glaurung/src/ && make clean && cd ../../../
cd pocket/phalanx/src/ && make clean && cd ../../../
cd pocket/scorpio/src/ && make clean && cd ../../../
cd pocket/viper01/src/ && make clean && cd ../../../
cd pocket/greko/src/ && make clean && cd ../../../
cd pocket/scidlet/src/ && make clean && cd ../../../
rm -f pocket/toga.exe pocket/glaurung.exe
rm -rf pocket/scid_pocket
### To make the executable files smaller: type "make strip".
#
strip:
strip $(EXECS)
### To compress scid and executables with gzexe: type "make gzexe".
#
gzexe:
gzexe $(EXECS) scid
scid: $(TCLS)
rm -f ./scid
cat $(TCLS) > ./scid
chmod +x scid
sc_addmove: scripts/sc_addmove.tcl
cp scripts/sc_addmove.tcl ./sc_addmove
chmod +x sc_addmove
sc_epgn: scripts/sc_epgn.tcl
cp scripts/sc_epgn.tcl ./sc_epgn
chmod +x sc_epgn
sc_spell: scripts/sc_spell.tcl
cp scripts/sc_spell.tcl ./sc_spell
chmod +x sc_spell
sc_eco: scripts/sc_eco.tcl
cp scripts/sc_eco.tcl ./sc_eco
chmod +x sc_eco
sc_import: scripts/sc_import.tcl
cp scripts/sc_import.tcl ./sc_import
chmod +x sc_import
sc_remote: scripts/sc_remote.tk
cp scripts/sc_remote.tk ./sc_remote
chmod +x sc_remote
sc_tree: scripts/sc_tree.tcl
cp scripts/sc_tree.tcl ./sc_tree
chmod +x sc_tree
sc_maketree: scripts/sc_maketree.tcl
cp scripts/sc_maketree.tcl ./sc_maketree
chmod +x sc_maketree
scidpgn: scripts/scidpgn.tcl
cp scripts/scidpgn.tcl ./scidpgn
chmod +x scidpgn
spliteco: scripts/spliteco.tcl
cp scripts/spliteco.tcl ./spliteco
chmod +x spliteco
tbstats: scripts/tbstats.tcl
cp scripts/tbstats.tcl ./tbstats
chmod +x tbstats
wmtest: scripts/wmtest.tk
cp scripts/wmtest.tk ./wmtest
chmod +x wmtest
pgnfix: scripts/pgnfix.py
cp scripts/pgnfix.py ./pgnfix
chmod +x pgnfix
eco2pgn: scripts/eco2pgn.py
cp scripts/eco2pgn.py ./eco2pgn
chmod +x eco2pgn
twic2pgn: scripts/twic2pgn.py
cp scripts/twic2pgn.py ./twic2pgn
chmod +x twic2pgn
spf2spi: scripts/spf2spi.tcl
cp scripts/spf2spi.tcl ./spf2spi
chmod +x spf2spi
scmerge: src/scmerge.o src/misc.o src/index.o src/date.o src/namebase.o \
src/gfile.o src/bytebuf.o src/textbuf.o src/myassert.o \
src/stralloc.o src/position.o
$(LINK) -o scmerge src/scmerge.o $(OBJS) $(ZLIB)
pgnscid: src/pgnscid.o $(OBJS)
$(LINK) $(PROFILE) -o pgnscid src/pgnscid.o $(OBJS) $(ZLIB)
scidlet: src/scidlet.o src/engine.o src/recog.o src/misc.o src/position.o \
src/dstring.o src/movelist.o
$(LINK) -o scidlet src/scidlet.o src/engine.o src/recog.o src/misc.o src/position.o src/movelist.o src/dstring.o
scidt: src/scidt.o $(OBJS)
$(LINK) -o scidt src/scidt.o $(OBJS) $(ZLIB)
tkscid: src/tkscid.o $(OBJS) src/tree.o src/filter.o src/pbook.o src/crosstab.o \
src/spellchk.o src/probe.o src/optable.o src/engine.o src/recog.o
$(LINK) -o tkscid src/tkscid.o $(OBJS) src/tree.o src/filter.o src/pbook.o src/crosstab.o src/spellchk.o src/probe.o src/optable.o src/engine.o src/recog.o $(ZLIB) $(TK_LIBRARY)
tcscid: src/tcscid.o $(OBJS) src/tree.o src/filter.o src/pbook.o src/crosstab.o \
src/spellchk.o src/probe.o src/optable.o src/engine.o src/recog.o
$(LINK) -o tcscid src/tcscid.o $(OBJS) src/tree.o src/filter.o src/pbook.o src/crosstab.o src/spellchk.o src/probe.o src/optable.o src/engine.o src/recog.o $(ZLIB) $(TCL_LIBRARY)
# eco2epd is now optional extra program NOT compiled by default, since
# scid now reads the .eco file format directly.
eco2epd: src/eco2epd.o $(OBJS) src/pbook.o
$(LINK) -o eco2epd src/eco2epd.o $(OBJS) src/pbook.o $(ZLIB)
### Rules to create .o files from .cpp files:
#
src/tcscid.o: src/tkscid.cpp
$(COMPILE) $(CPP_FLAGS) $(TCL_INCLUDE) -DTCL_ONLY -o src/tcscid.o -c src/tkscid.cpp
src/tkscid.o: src/tkscid.cpp
$(COMPILE) $(CPP_FLAGS) $(TCL_INCLUDE) -o src/tkscid.o -c src/tkscid.cpp
### The endgame tablebase code in the egtb/ subdirectory (not written by me)
# gives many warnings, so compile probe.cpp with warnings turned off:
#
src/probe.o: src/probe.cpp src/egtb/tbindex.cpp src/egtb/tbdecode.c
$(COMPILE) $(PROFILE) $(OPTIMIZE) $(DEBUG) $(SCIDFLAGS) $(TB) -o src/probe.o -c src/probe.cpp
### Generic rule for all other .cpp files:
#
%.o: %.cpp
$(COMPILE) $(CPP_FLAGS) $(TCL_INCLUDE) -o $@ -c $<
### Rule for compiling zlib source files:
#
src/zlib/%.o: src/zlib/%.c
$(CC) $(CFLAGS) -o $@ -c $<
#####
# Main Dependencies
# src/.depend:
# $(COMPILE) $(CPP_FLAGS) $(TCL_INCLUDE) -MM $(SCIDOBJS:.o=.cpp) > $@
#####
src/misc.o: src/misc.cpp src/common.h src/tclmy.h src/myassert.h src/error.h \
src/sqmove.h src/misc.h
src/index.o: src/index.cpp src/common.h src/tclmy.h src/myassert.h \
src/error.h src/sqmove.h src/index.h src/matsig.h src/namebase.h \
src/date.h src/misc.h src/stralloc.h src/strtree.h src/mfile.h \
src/dstring.h src/game.h src/position.h src/movelist.h src/sqlist.h \
src/sqset.h src/tokens.h src/textbuf.h src/bytebuf.h src/stored.h
src/date.o: src/date.cpp src/common.h src/tclmy.h src/myassert.h src/error.h \
src/sqmove.h src/date.h src/misc.h
src/namebase.o: src/namebase.cpp src/common.h src/tclmy.h src/myassert.h \
src/error.h src/sqmove.h src/namebase.h src/date.h src/misc.h \
src/stralloc.h src/strtree.h
src/position.o: src/position.cpp src/common.h src/tclmy.h src/myassert.h \
src/error.h src/sqmove.h src/position.h src/dstring.h src/misc.h \
src/movelist.h src/sqlist.h src/sqset.h src/tokens.h src/attacks.h \
src/hash.h
src/game.o: src/game.cpp src/common.h src/tclmy.h src/myassert.h src/error.h \
src/sqmove.h src/game.h src/date.h src/index.h src/matsig.h \
src/namebase.h src/misc.h src/stralloc.h src/strtree.h src/mfile.h \
src/dstring.h src/position.h src/movelist.h src/sqlist.h src/sqset.h \
src/tokens.h src/textbuf.h src/bytebuf.h src/gfile.h src/pgnparse.h \
src/naglatex.h src/nagtext.h src/stored.h
src/gfile.o: src/gfile.cpp src/common.h src/tclmy.h src/myassert.h \
src/error.h src/sqmove.h src/gfile.h src/bytebuf.h src/mfile.h \
src/dstring.h src/misc.h
src/matsig.o: src/matsig.cpp src/matsig.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h
src/bytebuf.o: src/bytebuf.cpp src/error.h src/bytebuf.h src/common.h \
src/tclmy.h src/myassert.h src/sqmove.h
src/textbuf.o: src/textbuf.cpp src/error.h src/textbuf.h src/common.h \
src/tclmy.h src/myassert.h src/sqmove.h src/misc.h
src/myassert.o: src/myassert.cpp src/myassert.h
src/stralloc.o: src/stralloc.cpp src/stralloc.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h src/misc.h
src/mfile.o: src/mfile.cpp src/common.h src/tclmy.h src/myassert.h \
src/error.h src/sqmove.h src/mfile.h src/dstring.h src/misc.h
src/dstring.o: src/dstring.cpp src/dstring.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h src/misc.h src/mfile.h
src/pgnparse.o: src/pgnparse.cpp src/pgnparse.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h src/tokens.h src/game.h \
src/date.h src/index.h src/matsig.h src/namebase.h src/misc.h \
src/stralloc.h src/strtree.h src/mfile.h src/dstring.h src/position.h \
src/movelist.h src/sqlist.h src/sqset.h src/textbuf.h src/bytebuf.h
src/stored.o: src/stored.cpp src/stored.h src/game.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h src/date.h src/index.h \
src/matsig.h src/namebase.h src/misc.h src/stralloc.h src/strtree.h \
src/mfile.h src/dstring.h src/position.h src/movelist.h src/sqlist.h \
src/sqset.h src/tokens.h src/textbuf.h src/bytebuf.h src/pgnparse.h \
src/timer.h src/tkscid.h src/engine.h src/gfile.h src/tree.h \
src/filter.h src/pbook.h src/crosstab.h src/spellchk.h src/probe.h \
src/optable.h src/polyglot.h
src/movelist.o: src/movelist.cpp src/movelist.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h src/misc.h
### End of Makefile
This is my second attempt to compile a program from source. (The first one was successful :) since it didn't need any dependencies being solved)
I am following this guide https://help.ubuntu.com/community/CompilingEasyHowTo
But so far no success.
Any help is greatly appreciated. Thanks.
So, I am trying to install it by following the steps below, but I am stuck after doing ./configure
1. Download it at http://scid.sourceforge.net/download.html
2. Extract it
cd ~/Downloads/
tar xjvf scid-4.0.tar.bz2
mv scid /usr/local/src/
3. Compile and install
cd /usr/local/src/scid
./configure
I get the following
configure: Makefile configuration program for Scid
Renaming "Makefile" to "Makefile.bak"
Tcl/Tk version: 8.5
Your operating system is: Linux 2.6.31-16-generic
Location of "tcl.h": not found
Location of "tk.h": not found
Location of Tcl 8.5 library: /usr/lib
Location of Tk 8.5 library: /usr/lib
Location of X11 library: /usr/lib
Checking if your system already has zlib installed: no.
Not all settings could be determined!
The default Makefile was written.
You will need to edit it before you can compile Scid.
If I do
make
I get
make: *** [src/stored.o] Error 1
The thing is I really don't know if this is a problem of dependencies or something else, since it says
The default Makefile was written.
You will need to edit it before you can compile Scid
I tried installing
sudo apt-get remove zlibc
But no luck.
:confused:
When I
gedit Makefile
I see
##### Makefile for Scid for Unix operating systems.
### Compiler: Most Unix systems use g++ for compiling and linking.
#
COMPILE = g++
CC = gcc
LINK = g++
DESTDIR =
# BINDIR: where the Scid programs are copied for "make install".
#
BINDIR = /usr/local/bin
# SHAREDIR: where scid.eco is copied for "make install".
#
SHAREDIR = /usr/local/share/scid
### TCL_VERSION: Set this according to the version of Tcl/Tk you have
# installed that you want Scid to use: 8.0, 8.1, 8.2, 8.3, etc.
#
TCL_VERSION = 8.5
# TCL_INCLUDE, TCL_LIBRARY, TK_LIBRARY: these are the compiler options
# needed for linking Scid with Tcl/Tk. The program "./configure"
# will try to determine them automatically, but if it cannot, you
# can use the examples below for help in setting these variables.
#
# Sorry, "./configure" was not successful. The default settings are:
#
TCL_INCLUDE = -I/usr/include
TCL_LIBRARY = -L/usr/lib -ltcl$(TCL_VERSION) -ldl
TK_LIBRARY = $(TCL_LIBRARY) -ltk$(TCL_VERSION) -L/usr/X11R6/lib -lX11
### Here are other commonly used settings for the Tcl/Tk compiler options:
### Linux (Red Hat and other distributions):
# TCL_INCLUDE = -I /usr/include
# TCL_LIBRARY = -L /usr/lib -ltcl$(TCL_VERSION) -ldl
# TK_LIBRARY = $(TCL_LIBRARY) -ltk$(TCL_VERSION) -L /usr/X11R6/lib -lX11
### Solaris:
# TCL_INCLUDE = -I /usr/local/tcl/include
# TCL_LIBRARY = -L /usr/local/tcl/lib -ltcl$(TCL_VERSION) -ldl
# TK_LIBRARY = $(TCL_LIBRARY) -ltk$(TCL_VERSION)
# Someone sent me these settings for SuSE Linux 6.1:
### Linux (SuSE distribution):
# TCL_INCLUDE = -I /usr/X11R6/include
# TCL_LIBRARY = -L /usr/lib -ltcl$(TCL_VERSION) -ldl
# TK_LIBRARY = $(TCL_LIBRARY) -L /usr/X11R6/lib -ltk$(TCL_VERSION) -lX11
# Someone sent me these settings for FreeBSD with Tcl/Tk 8.0:
### FreeBSD:
# TCL_INCLUDE = -I /usr/local/include/tcl8.0 -I /usr/local/include/tk8.0
# TCL_LIBRARY = -L /usr/local/lib -ltcl80 -ldl
# TK_LIBRARY = $(TCL_LIBRARY) -ltk80 -L /usr/X11/lib -lX11
########################################
### Compiler options:
### TB: Using Nalimov tablebases with Scid. Use "TB = -DSCID_USE_TB" for
# tablebase support, or just "TB = " for no tablebase capability.
# Use "TB = -DSCID_USE_TB -DT41_INCLUDE" to include use of 4-1
# (King + 3 pieces vs lone king) tablebases.
#
TB = -DSCID_USE_TB -DT41_INCLUDE
### SCIDFLAGS: Scid customization flags.
# Use -DZLIB if your system does not have zlib and you need
# to include the code in the src/zlib directory.
# The default is to use the system zlib library.
#
SCIDFLAGS = -DZLIB
### OPTIMIZE: Optimization options for C++ compiler.
# -O4 is the most optimization for g++. I have found -O2 to do
# just as well, but someone reported a noticable difference in speed
# between -O4 and -O2 so the default here is -O4.
# On some systems, adding "-fno-rtti" and "-fno-exceptions" produces
# smaller, faster programs since Scid does not use those C++ features.
#
OPTIMIZE = -O4 -fno-rtti -fno-exceptions
### DEBUG: Defining the macro ASSERTIONS will turn on assertions, which
# helps to track bugs after modifications, but the programs will run
# a little faster with assertions turned off.
#
DEBUG = #-DASSERTIONS
### WARNINGS: I always compile with all warnings on (-Wall), and all the
# files should compile warning-free using g++.
#
WARNINGS = -Wall
### PROFILE: Set this to "-pg" for profiling in g++ and gcc.
#
PROFILE =
### CPP_FLAGS: Flags for C++ compilation.
#
CPP_FLAGS = $(PROFILE) $(OPTIMIZE) $(WARNINGS) $(DEBUG) $(SCIDFLAGS)
### CFLAGS: Flags for C compilation (only used for compiling zlib).
#
CFLAGS = -O2 -Wall $(PROFILE)
### LANGUAGES: List of additional Tcl files to include in Scid for
# multi-language menu support.
# By default, it is all the contributed languages, but you
# can reduce the size of the Scid program by only specifying
# the languages you want supported.
#
LANGUAGES = tcl/lang/deutsch.tcl tcl/lang/francais.tcl tcl/lang/italian.tcl tcl/lang/nederlan.tcl tcl/lang/spanish.tcl tcl/lang/portbr.tcl tcl/lang/swedish.tcl tcl/lang/norsk.tcl tcl/lang/polish.tcl tcl/lang/czech.tcl tcl/lang/hungary.tcl tcl/lang/serbian.tcl tcl/lang/catalan.tcl tcl/lang/russian.tcl
################################################## ##########
#
# You should not need to edit anything below this line.
#
################################################## ##########
### EXECS: executable programs compiled from C++ files.
# Note: scidt and eco2epd are obsolete and not compiled by default.
# PG : put back scidt has it appears to be useful in certain cases
#
EXECS= pgnscid tkscid tcscid scmerge scidlet scidt
### SCIDOBJS: not all the .o files that make up Scid, just the standard ones
# that most of the programs include.
#
SCIDOBJS= src/misc.o src/index.o src/date.o src/namebase.o src/position.o \
src/game.o src/gfile.o src/matsig.o src/bytebuf.o src/textbuf.o \
src/myassert.o src/stralloc.o src/mfile.o src/dstring.o src/pgnparse.o \
src/stored.o src/movelist.o \
src/polyglot/attack.o src/polyglot/board.o src/polyglot/book.o \
src/polyglot/book_make.o src/polyglot/book_merge.o src/polyglot/colour.o \
src/polyglot/fen.o src/polyglot/game.o src/polyglot/hash.o \
src/polyglot/io.o src/polyglot/line.o src/polyglot/list.o src/polyglot/main.o src/polyglot/move.o \
src/polyglot/move_do.o src/polyglot/move_gen.o src/polyglot/move_legal.o src/polyglot/option.o \
src/polyglot/parse.o src/polyglot/pgn.o src/polyglot/piece.o src/polyglot/random.o \
src/polyglot/san.o src/polyglot/search.o src/polyglot/square.o src/polyglot/util.o
### ZLIBOBJS: object files in the zlib compression library.
#
ZLIBOBJS= src/zlib/adler32.o src/zlib/compress.o src/zlib/crc32.o \
src/zlib/gzio.o src/zlib/uncompr.o src/zlib/deflate.o src/zlib/trees.o \
src/zlib/zutil.o src/zlib/inflate.o src/zlib/infblock.o \
src/zlib/inftrees.o src/zlib/infcodes.o src/zlib/infutil.o \
src/zlib/inffast.o
### ZLIB: Should be "-lz" if your system has zlib, "" otherwise.
#
ZLIB =
### OBJS: Will be "$(SCIDOBJS)", "$(POLYGLOTOBJS)", and also "$(ZLIBOBJS)" if they are
# needed on your system.
OBJS= $(SCIDOBJS) $(ZLIBOBJS)
### TCLS: all the .tcl files that make up "scid".
#
TCLS= \
tcl/start.tcl \
tcl/config.tcl \
tcl/bitmaps.tcl \
tcl/language.tcl \
tcl/utils.tcl \
tcl/utils/date.tcl tcl/utils/font.tcl tcl/utils/graph.tcl tcl/utils/history.tcl \
tcl/utils/pane.tcl tcl/utils/sound.tcl tcl/utils/string.tcl tcl/utils/tooltip.tcl \
tcl/utils/validate.tcl tcl/utils/win.tcl \
tcl/misc/misc.tcl tcl/htext.tcl \
tcl/file.tcl \
tcl/file/finder.tcl tcl/file/bookmark.tcl tcl/file/recent.tcl tcl/file/epd.tcl \
tcl/file/spellchk.tcl tcl/file/maint.tcl \
tcl/edit.tcl \
tcl/game.tcl \
tcl/game/browser.tcl \
tcl/windows.tcl \
tcl/windows/gamelist.tcl tcl/windows/pgn.tcl tcl/windows/book.tcl \
tcl/windows/comment.tcl tcl/windows/eco.tcl \
tcl/windows/stats.tcl tcl/windows/tree.tcl tcl/windows/crosstab.tcl \
tcl/windows/pfinder.tcl tcl/windows/tourney.tcl tcl/windows/switcher.tcl \
tcl/search/search.tcl \
tcl/search/board.tcl tcl/search/header.tcl tcl/search/material.tcl \
tcl/contrib/ezsmtp/ezsmtp.tcl \
tcl/tools/email.tcl \
tcl/tools/import.tcl \
tcl/tools/optable.tcl tcl/tools/preport.tcl tcl/tools/pinfo.tcl \
tcl/tools/analysis.tcl tcl/tools/wbdetect.tcl \
tcl/tools/reper.tcl tcl/tools/graphs.tcl tcl/tools/tablebase.tcl tcl/tools/ptracker.tcl \
tcl/help/help.tcl tcl/help/tips.tcl \
tcl/menus.tcl tcl/board.tcl tcl/move.tcl tcl/main.tcl tcl/tools/correspondence.tcl \
tcl/lang/english.tcl $(LANGUAGES) \
tcl/tools/uci.tcl tcl/end.tcl tcl/tools/tacgame.tcl tcl/tools/sergame.tcl tcl/tools/calvar.tcl tcl/tools/fics.tcl tcl/tools/opening.tcl tcl/tools/tactics.tcl tcl/tools/reviewgame.tcl tcl/utils/metadata.tcl tcl/tools/inputengine.tcl tcl/tools/novag.tcl tcl/misc/flags.tcl
### SCRIPTS:
# Small extra programs. Most are written in Tcl using tcscid, but
# a few contributed ones may be in Python or other languages.
#
SCRIPTS= sc_addmove sc_epgn sc_spell sc_eco sc_import sc_remote sc_tree scidpgn pgnfix spliteco spf2spi
####################
### Type "make" or "make all" to make all programs:
#
all: all_scid all_engines
all_scid: scid $(SCRIPTS) $(EXECS)
all_engines: phalanx-scid toga
phalanx-scid:
cd engines/phalanx-scid/ && $(MAKE) && cd ../../
toga:
cd engines/togaII1.2.1a/src/ && $(MAKE) && cd ../../
### To copy all executables to $BINDIR, with read and execute permission
# for all users, and put extra files in $SHAREDIR, type "make install".
#
install: install_scid install_engines
install_scid: all_scid
install -m 755 -d $(DESTDIR)$(SHAREDIR)
install -m 755 -d $(DESTDIR)$(BINDIR)
install -m 755 -d $(DESTDIR)$(SHAREDIR)/data/
install -m 755 scid $(SCRIPTS) $(EXECS) $(DESTDIR)$(BINDIR)
install -m 644 -p scid.eco $(DESTDIR)$(SHAREDIR)/data/
install -m 755 -d $(DESTDIR)$(SHAREDIR)/books
install -m 666 ./books/*.* $(DESTDIR)$(SHAREDIR)/books/
install -m 755 -d $(DESTDIR)$(SHAREDIR)/bases
install -m 666 ./bases/*.* $(DESTDIR)$(SHAREDIR)/bases/
install -m 755 -d $(DESTDIR)$(SHAREDIR)/html
cp -r ./html/* $(DESTDIR)$(SHAREDIR)/html/
install_engines: all_engines
install -m 755 -d $(SHAREDIR)/engines
install -m 755 -d $(SHAREDIR)/engines/phalanx-scid
install ./engines/phalanx-scid/phalanx-scid $(SHAREDIR)/engines/phalanx-scid
install -m 755 -d $(SHAREDIR)/engines/togaII1.2.1a
install ./engines/togaII1.2.1a/src/togaII $(SHAREDIR)/engines/togaII1.2.1a/
uninstall:
rm -rf $(SHAREDIR)/engines
rm -rf $(SHAREDIR)/books
rm -rf $(SHAREDIR)/bases
rm -rf $(SHAREDIR)/data/
rm -f $(SHAREDIR)/data/scid.eco
rm -f $(BINDIR)/scid $(BINDIR)/sc_addmove $(BINDIR)/sc_epgn
rm -f $(BINDIR)/sc_spell $(BINDIR)/sc_eco $(BINDIR)/sc_import
rm -f $(BINDIR)/sc_remote $(BINDIR)/sc_tree $(BINDIR)/scidpgn
rm -f $(BINDIR)/pgnfix $(BINDIR)/spliteco
rm -f $(BINDIR)/pgnscid $(BINDIR)/tkscid $(BINDIR)/tcscid
rm -f $(BINDIR)/scmerge $(BINDIR)/scidlet
rm -rf $(SHAREDIR)/html
### To remove Scid files placed in the BINDIR and SHAREDIR directories,
# type "make distclean".
#
distclean:
cd $(BINDIR) && rm -f $(EXECS) $(SCRIPTS)
-rm -f $(SHAREDIR)/scid.eco
### To remove object and executable files: type "make clean".
#
clean:
rm -f game.* learn* tkscid.so tkscid.dll position.* src/*.o src/zlib/*.o src/zlib/*.a src/polyglot/*.o $(EXECS) scid $(SCRIPTS)
cd engines/phalanx-scid/ && make clean && cd ../../
cd engines/togaII1.2.1a/src/ && make clean && cd ../../../
cd pocket/toga/src/ && make clean && cd ../../../
cd pocket/toga134/src/ && make clean && cd ../../../
# cd pocket/toga141SE/src/ && make clean && cd ../../../
cd pocket/fruit_21/src/ && make clean && cd ../../../
cd pocket/gambitfruit/src/ && make clean && cd ../../../
cd pocket/glaurung/src/ && make clean && cd ../../../
cd pocket/phalanx/src/ && make clean && cd ../../../
cd pocket/scorpio/src/ && make clean && cd ../../../
cd pocket/viper01/src/ && make clean && cd ../../../
cd pocket/greko/src/ && make clean && cd ../../../
cd pocket/scidlet/src/ && make clean && cd ../../../
rm -f pocket/toga.exe pocket/glaurung.exe
rm -rf pocket/scid_pocket
### To make the executable files smaller: type "make strip".
#
strip:
strip $(EXECS)
### To compress scid and executables with gzexe: type "make gzexe".
#
gzexe:
gzexe $(EXECS) scid
scid: $(TCLS)
rm -f ./scid
cat $(TCLS) > ./scid
chmod +x scid
sc_addmove: scripts/sc_addmove.tcl
cp scripts/sc_addmove.tcl ./sc_addmove
chmod +x sc_addmove
sc_epgn: scripts/sc_epgn.tcl
cp scripts/sc_epgn.tcl ./sc_epgn
chmod +x sc_epgn
sc_spell: scripts/sc_spell.tcl
cp scripts/sc_spell.tcl ./sc_spell
chmod +x sc_spell
sc_eco: scripts/sc_eco.tcl
cp scripts/sc_eco.tcl ./sc_eco
chmod +x sc_eco
sc_import: scripts/sc_import.tcl
cp scripts/sc_import.tcl ./sc_import
chmod +x sc_import
sc_remote: scripts/sc_remote.tk
cp scripts/sc_remote.tk ./sc_remote
chmod +x sc_remote
sc_tree: scripts/sc_tree.tcl
cp scripts/sc_tree.tcl ./sc_tree
chmod +x sc_tree
sc_maketree: scripts/sc_maketree.tcl
cp scripts/sc_maketree.tcl ./sc_maketree
chmod +x sc_maketree
scidpgn: scripts/scidpgn.tcl
cp scripts/scidpgn.tcl ./scidpgn
chmod +x scidpgn
spliteco: scripts/spliteco.tcl
cp scripts/spliteco.tcl ./spliteco
chmod +x spliteco
tbstats: scripts/tbstats.tcl
cp scripts/tbstats.tcl ./tbstats
chmod +x tbstats
wmtest: scripts/wmtest.tk
cp scripts/wmtest.tk ./wmtest
chmod +x wmtest
pgnfix: scripts/pgnfix.py
cp scripts/pgnfix.py ./pgnfix
chmod +x pgnfix
eco2pgn: scripts/eco2pgn.py
cp scripts/eco2pgn.py ./eco2pgn
chmod +x eco2pgn
twic2pgn: scripts/twic2pgn.py
cp scripts/twic2pgn.py ./twic2pgn
chmod +x twic2pgn
spf2spi: scripts/spf2spi.tcl
cp scripts/spf2spi.tcl ./spf2spi
chmod +x spf2spi
scmerge: src/scmerge.o src/misc.o src/index.o src/date.o src/namebase.o \
src/gfile.o src/bytebuf.o src/textbuf.o src/myassert.o \
src/stralloc.o src/position.o
$(LINK) -o scmerge src/scmerge.o $(OBJS) $(ZLIB)
pgnscid: src/pgnscid.o $(OBJS)
$(LINK) $(PROFILE) -o pgnscid src/pgnscid.o $(OBJS) $(ZLIB)
scidlet: src/scidlet.o src/engine.o src/recog.o src/misc.o src/position.o \
src/dstring.o src/movelist.o
$(LINK) -o scidlet src/scidlet.o src/engine.o src/recog.o src/misc.o src/position.o src/movelist.o src/dstring.o
scidt: src/scidt.o $(OBJS)
$(LINK) -o scidt src/scidt.o $(OBJS) $(ZLIB)
tkscid: src/tkscid.o $(OBJS) src/tree.o src/filter.o src/pbook.o src/crosstab.o \
src/spellchk.o src/probe.o src/optable.o src/engine.o src/recog.o
$(LINK) -o tkscid src/tkscid.o $(OBJS) src/tree.o src/filter.o src/pbook.o src/crosstab.o src/spellchk.o src/probe.o src/optable.o src/engine.o src/recog.o $(ZLIB) $(TK_LIBRARY)
tcscid: src/tcscid.o $(OBJS) src/tree.o src/filter.o src/pbook.o src/crosstab.o \
src/spellchk.o src/probe.o src/optable.o src/engine.o src/recog.o
$(LINK) -o tcscid src/tcscid.o $(OBJS) src/tree.o src/filter.o src/pbook.o src/crosstab.o src/spellchk.o src/probe.o src/optable.o src/engine.o src/recog.o $(ZLIB) $(TCL_LIBRARY)
# eco2epd is now optional extra program NOT compiled by default, since
# scid now reads the .eco file format directly.
eco2epd: src/eco2epd.o $(OBJS) src/pbook.o
$(LINK) -o eco2epd src/eco2epd.o $(OBJS) src/pbook.o $(ZLIB)
### Rules to create .o files from .cpp files:
#
src/tcscid.o: src/tkscid.cpp
$(COMPILE) $(CPP_FLAGS) $(TCL_INCLUDE) -DTCL_ONLY -o src/tcscid.o -c src/tkscid.cpp
src/tkscid.o: src/tkscid.cpp
$(COMPILE) $(CPP_FLAGS) $(TCL_INCLUDE) -o src/tkscid.o -c src/tkscid.cpp
### The endgame tablebase code in the egtb/ subdirectory (not written by me)
# gives many warnings, so compile probe.cpp with warnings turned off:
#
src/probe.o: src/probe.cpp src/egtb/tbindex.cpp src/egtb/tbdecode.c
$(COMPILE) $(PROFILE) $(OPTIMIZE) $(DEBUG) $(SCIDFLAGS) $(TB) -o src/probe.o -c src/probe.cpp
### Generic rule for all other .cpp files:
#
%.o: %.cpp
$(COMPILE) $(CPP_FLAGS) $(TCL_INCLUDE) -o $@ -c $<
### Rule for compiling zlib source files:
#
src/zlib/%.o: src/zlib/%.c
$(CC) $(CFLAGS) -o $@ -c $<
#####
# Main Dependencies
# src/.depend:
# $(COMPILE) $(CPP_FLAGS) $(TCL_INCLUDE) -MM $(SCIDOBJS:.o=.cpp) > $@
#####
src/misc.o: src/misc.cpp src/common.h src/tclmy.h src/myassert.h src/error.h \
src/sqmove.h src/misc.h
src/index.o: src/index.cpp src/common.h src/tclmy.h src/myassert.h \
src/error.h src/sqmove.h src/index.h src/matsig.h src/namebase.h \
src/date.h src/misc.h src/stralloc.h src/strtree.h src/mfile.h \
src/dstring.h src/game.h src/position.h src/movelist.h src/sqlist.h \
src/sqset.h src/tokens.h src/textbuf.h src/bytebuf.h src/stored.h
src/date.o: src/date.cpp src/common.h src/tclmy.h src/myassert.h src/error.h \
src/sqmove.h src/date.h src/misc.h
src/namebase.o: src/namebase.cpp src/common.h src/tclmy.h src/myassert.h \
src/error.h src/sqmove.h src/namebase.h src/date.h src/misc.h \
src/stralloc.h src/strtree.h
src/position.o: src/position.cpp src/common.h src/tclmy.h src/myassert.h \
src/error.h src/sqmove.h src/position.h src/dstring.h src/misc.h \
src/movelist.h src/sqlist.h src/sqset.h src/tokens.h src/attacks.h \
src/hash.h
src/game.o: src/game.cpp src/common.h src/tclmy.h src/myassert.h src/error.h \
src/sqmove.h src/game.h src/date.h src/index.h src/matsig.h \
src/namebase.h src/misc.h src/stralloc.h src/strtree.h src/mfile.h \
src/dstring.h src/position.h src/movelist.h src/sqlist.h src/sqset.h \
src/tokens.h src/textbuf.h src/bytebuf.h src/gfile.h src/pgnparse.h \
src/naglatex.h src/nagtext.h src/stored.h
src/gfile.o: src/gfile.cpp src/common.h src/tclmy.h src/myassert.h \
src/error.h src/sqmove.h src/gfile.h src/bytebuf.h src/mfile.h \
src/dstring.h src/misc.h
src/matsig.o: src/matsig.cpp src/matsig.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h
src/bytebuf.o: src/bytebuf.cpp src/error.h src/bytebuf.h src/common.h \
src/tclmy.h src/myassert.h src/sqmove.h
src/textbuf.o: src/textbuf.cpp src/error.h src/textbuf.h src/common.h \
src/tclmy.h src/myassert.h src/sqmove.h src/misc.h
src/myassert.o: src/myassert.cpp src/myassert.h
src/stralloc.o: src/stralloc.cpp src/stralloc.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h src/misc.h
src/mfile.o: src/mfile.cpp src/common.h src/tclmy.h src/myassert.h \
src/error.h src/sqmove.h src/mfile.h src/dstring.h src/misc.h
src/dstring.o: src/dstring.cpp src/dstring.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h src/misc.h src/mfile.h
src/pgnparse.o: src/pgnparse.cpp src/pgnparse.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h src/tokens.h src/game.h \
src/date.h src/index.h src/matsig.h src/namebase.h src/misc.h \
src/stralloc.h src/strtree.h src/mfile.h src/dstring.h src/position.h \
src/movelist.h src/sqlist.h src/sqset.h src/textbuf.h src/bytebuf.h
src/stored.o: src/stored.cpp src/stored.h src/game.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h src/date.h src/index.h \
src/matsig.h src/namebase.h src/misc.h src/stralloc.h src/strtree.h \
src/mfile.h src/dstring.h src/position.h src/movelist.h src/sqlist.h \
src/sqset.h src/tokens.h src/textbuf.h src/bytebuf.h src/pgnparse.h \
src/timer.h src/tkscid.h src/engine.h src/gfile.h src/tree.h \
src/filter.h src/pbook.h src/crosstab.h src/spellchk.h src/probe.h \
src/optable.h src/polyglot.h
src/movelist.o: src/movelist.cpp src/movelist.h src/common.h src/tclmy.h \
src/myassert.h src/error.h src/sqmove.h src/misc.h
### End of Makefile
This is my second attempt to compile a program from source. (The first one was successful :) since it didn't need any dependencies being solved)
I am following this guide https://help.ubuntu.com/community/CompilingEasyHowTo
But so far no success.
Any help is greatly appreciated. Thanks.