PeggySue
December 7th, 2009, 07:41 PM
I like the idea of turning off OS-prober but first I will try and make it work as intended.
My BIOS doesn't allow me to specify drives as in sda or sdb. I am running a Dell Dimnesion 8300 with A07 BIOS. I get options:
Drive Configuration: The Primary master is just HARD DRIVE not sda etc.
Hard Drive Sequence: is System BIOS Drives or USB
Boot Sequence: is Floppy, CD then Hard Disk.
Would physically swapping the drives over be as good?
This is my results.txt: (sda and sdb are 160GB WD Hard Drives, sdc is WD 320 GB USB "My Book") (sdb1 is my new 9.10 install, sdb2 is my 8.04 install, sdb3 is my previous 9.10 install. sda has Windows XP on sda1, my /home and some swap space.)
============================= Boot Info Summary: ==============================
=> Grub 1.97 is installed in the MBR of /dev/sda and looks for
(UUID=4f7d2b45-eda2-4a42-a656-92d8a112d5e3)/boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on boot drive #2
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Syslinux is installed in the MBR of /dev/sdc
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda3: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb2: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 8.04.3 LTS
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sdb3: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb4: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xa19fa19f
Partition Boot Start End Size Id System
/dev/sda1 * 63 78,027,704 78,027,642 7 HPFS/NTFS
/dev/sda2 78,027,705 303,467,849 225,440,145 83 Linux
/dev/sda3 303,467,850 312,576,704 9,108,855 5 Extended
/dev/sda5 303,467,913 312,576,704 9,108,792 82 Linux swap / Solaris
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders, total 312500000 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xcaf7caf7
Partition Boot Start End Size Id System
/dev/sdb1 * 63 78,027,704 78,027,642 83 Linux
/dev/sdb2 78,027,705 195,221,879 117,194,175 83 Linux
/dev/sdb3 195,221,880 292,961,339 97,739,460 83 Linux
/dev/sdb4 292,961,340 312,496,379 19,535,040 5 Extended
/dev/sdb5 292,961,403 312,496,379 19,534,977 82 Linux swap / Solaris
Drive: sdc ___________________ __________________________________________________ ___
Disk /dev/sdc: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x000a6e23
Partition Boot Start End Size Id System
/dev/sdc1 * 63 625,137,344 625,137,282 c W95 FAT32 (LBA)
blkid -c /dev/null: __________________________________________________ __________
/dev/sda1: UUID="BE7C3B1D7C3AD03F" TYPE="ntfs"
/dev/sda2: UUID="eda15923-9024-441a-ac0b-419ddae669e4" TYPE="ext3"
/dev/sda5: UUID="68144d8d-bff8-4026-a9dc-e6a84d7f6db7" TYPE="swap"
/dev/sdb1: UUID="4f7d2b45-eda2-4a42-a656-92d8a112d5e3" TYPE="ext4"
/dev/sdb2: UUID="1e263d9f-8195-4c98-b0b5-b81b03c084f9" TYPE="ext3"
/dev/sdb3: UUID="7b243d97-6ae2-4709-8426-7717d45824fe" TYPE="ext4"
/dev/sdb5: UUID="36159729-7060-432b-abd1-8ce0ec926fc5" TYPE="swap"
/dev/sdc1: LABEL="My Book" UUID="6B7A-040B" TYPE="vfat"
=============================== "mount" output: ===============================
/dev/sdb1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
/dev/sda2 on /home type ext3 (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/peter/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=peter)
/dev/sdc1 on /media/My Book type vfat (rw,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000, shortname=mixed,dmask=0077,utf8=1,flush)
/dev/sda1 on /media/BE7C3B1D7C3AD03F type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,b lksize=4096)
/dev/sdb2 on /media/1e263d9f-8195-4c98-b0b5-b81b03c084f9 type ext3 (rw,nosuid,nodev,uhelper=devkit)
/dev/sdb3 on /media/7b243d97-6ae2-4709-8426-7717d45824fe type ext4 (rw,nosuid,nodev,uhelper=devkit)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect
=========================== sdb1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd1,1)
search --no-floppy --fs-uuid --set 4f7d2b45-eda2-4a42-a656-92d8a112d5e3
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=light-cyan/dark-gray
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd1,1)
search --no-floppy --fs-uuid --set 4f7d2b45-eda2-4a42-a656-92d8a112d5e3
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=4f7d2b45-eda2-4a42-a656-92d8a112d5e3 ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd1,1)
search --no-floppy --fs-uuid --set 4f7d2b45-eda2-4a42-a656-92d8a112d5e3
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=4f7d2b45-eda2-4a42-a656-92d8a112d5e3 ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set be7c3b1d7c3ad03f
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu 8.04.3 LTS, kernel 2.6.24-25-generic (on /dev/sdb2)" {
insmod ext2
set root=(hd1,2)
search --no-floppy --fs-uuid --set 1e263d9f-8195-4c98-b0b5-b81b03c084f9
linux /boot/vmlinuz-2.6.24-25-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro quiet splash
initrd /boot/initrd.img-2.6.24-25-generic
}
menuentry "Ubuntu 8.04.3 LTS, kernel 2.6.24-25-generic (recovery mode) (on /dev/sdb2)" {
insmod ext2
set root=(hd1,2)
search --no-floppy --fs-uuid --set 1e263d9f-8195-4c98-b0b5-b81b03c084f9
linux /boot/vmlinuz-2.6.24-25-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro single
initrd /boot/initrd.img-2.6.24-25-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic, USE ME (on /dev/sdb3)" {
insmod ext2
set root=(hd1,3)
search --no-floppy --fs-uuid --set 7b243d97-6ae2-4709-8426-7717d45824fe
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=7b243d97-6ae2-4709-8426-7717d45824fe ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sdb3)" {
insmod ext2
set root=(hd1,3)
search --no-floppy --fs-uuid --set 7b243d97-6ae2-4709-8426-7717d45824fe
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=7b243d97-6ae2-4709-8426-7717d45824fe ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdb1 during installation
UUID=4f7d2b45-eda2-4a42-a656-92d8a112d5e3 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda2 during installation
UUID=eda15923-9024-441a-ac0b-419ddae669e4 /home ext3 defaults 0 2
# swap was on /dev/sda5 during installation
UUID=68144d8d-bff8-4026-a9dc-e6a84d7f6db7 none swap sw 0 0
# swap was on /dev/sdb5 during installation
UUID=36159729-7060-432b-abd1-8ce0ec926fc5 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdb1: Location of files loaded by Grub: ===================
.0GB: boot/grub/grub.cfg
.0GB: boot/initrd.img-2.6.31-16-generic
.0GB: boot/vmlinuz-2.6.31-16-generic
.0GB: initrd.img
.0GB: vmlinuz
=========================== sdb2/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd1,1)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.04.3 LTS, kernel 2.6.24-25-generic
root (hd1,1)
kernel /boot/vmlinuz-2.6.24-25-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro quiet splash
initrd /boot/initrd.img-2.6.24-25-generic
quiet
title Ubuntu 8.04.3 LTS, kernel 2.6.24-25-generic (recovery mode)
root (hd1,1)
kernel /boot/vmlinuz-2.6.24-25-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro single
initrd /boot/initrd.img-2.6.24-25-generic
#title Ubuntu 8.04.3 LTS, kernel 2.6.24-24-generic
#root (hd1,1)
#kernel /boot/vmlinuz-2.6.24-24-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro quiet splash
#initrd /boot/initrd.img-2.6.24-24-generic
#quiet
#title Ubuntu 8.04.3 LTS, kernel 2.6.24-24-generic (recovery mode)
#root (hd1,1)
#kernel /boot/vmlinuz-2.6.24-24-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro single
#initrd /boot/initrd.img-2.6.24-24-generic
#title Ubuntu 8.04.3 LTS, kernel 2.6.24-23-generic
#root (hd1,1)
#kernel /boot/vmlinuz-2.6.24-23-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro quiet splash
#initrd /boot/initrd.img-2.6.24-23-generic
#quiet
#title Ubuntu 8.04.3 LTS, kernel 2.6.24-23-generic (recovery mode)
#root (hd1,1)
#kernel /boot/vmlinuz-2.6.24-23-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro single
#initrd /boot/initrd.img-2.6.24-23-generic
#title Ubuntu 8.04.3 LTS, kernel 2.6.24-22-generic
#root (hd1,1)
#kernel /boot/vmlinuz-2.6.24-22-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro quiet splash
#initrd /boot/initrd.img-2.6.24-22-generic
#quiet
#title Ubuntu 8.04.3 LTS, kernel 2.6.24-22-generic (recovery mode)
#root (hd1,1)
#kernel /boot/vmlinuz-2.6.24-22-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro single
#initrd /boot/initrd.img-2.6.24-22-generic
#title Ubuntu 8.04.3 LTS, kernel 2.6.24-21-generic
#root (hd1,1)
#kernel /boot/vmlinuz-2.6.24-21-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro quiet splash
#initrd /boot/initrd.img-2.6.24-21-generic
#quiet
#title Ubuntu 8.04.3 LTS, kernel 2.6.24-21-generic (recovery mode)
#root (hd1,1)
#kernel /boot/vmlinuz-2.6.24-21-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro single
#initrd /boot/initrd.img-2.6.24-21-generic
#title Ubuntu 8.04.3 LTS, kernel 2.6.24-19-generic
#root (hd1,1)
#kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro quiet splash
#initrd /boot/initrd.img-2.6.24-19-generic
#quiet
#title Ubuntu 8.04.3 LTS, kernel 2.6.24-19-generic (recovery mode)
#root (hd1,1)
#kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro single
#initrd /boot/initrd.img-2.6.24-19-generic
#title Ubuntu 8.04.3 LTS, memtest86+
#root (hd1,1)
#kernel /boot/memtest86+.bin
#quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Home Edition MAPS AND PHOTOS
root (hd0,0)
savedefault
makeactive
chainloader +1
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda2.
title Ubuntu, kernel 2.6.20-17-generic (on /dev/sda2) 8.04 Old (upgraded system)
root (hd0,1)
kernel /boot/vmlinuz-2.6.20-17-generic root=UUID=eda15923-9024-441a-ac0b-419ddae669e4 ro quiet splash
initrd /boot/initrd.img-2.6.20-17-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda2.
#title Ubuntu, kernel 2.6.20-17-generic (recovery mode) (on /dev/sda2)
#root (hd0,1)
#kernel /boot/vmlinuz-2.6.20-17-generic root=UUID=eda15923-9024-441a-ac0b-419ddae669e4 ro single
#initrd /boot/initrd.img-2.6.20-17-generic
#savedefault
#boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda2.
#title Ubuntu, kernel 2.6.20-16-generic (on /dev/sda2)
#root (hd0,1)
#kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=eda15923-9024-441a-ac0b-419ddae669e4 ro quiet splash
#initrd /boot/initrd.img-2.6.20-16-generic
#savedefault
#boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda2.
#title Ubuntu, kernel 2.6.20-16-generic (recovery mode) (on /dev/sda2)
#root (hd0,1)
#kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=eda15923-9024-441a-ac0b-419ddae669e4 ro single
#initrd /boot/initrd.img-2.6.20-16-generic
#savedefault
#boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda2.
#title Ubuntu, kernel 2.6.20-15-generic (on /dev/sda2)
#root (hd0,1)
#kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=eda15923-9024-441a-ac0b-419ddae669e4 ro quiet splash
#initrd /boot/initrd.img-2.6.20-15-generic
#savedefault
#boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda2.
#title Ubuntu, kernel 2.6.20-15-generic (recovery mode) (on /dev/sda2)
#root (hd0,1)
#kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=eda15923-9024-441a-ac0b-419ddae669e4 ro single
#initrd /boot/initrd.img-2.6.20-15-generic
#savedefault
#boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda2.
#title Ubuntu, memtest86+ (on /dev/sda2)
#root (hd0,1)
#kernel /boot/memtest86+.bin
#savedefault
#boot
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sdb1
title Microsoft Windows XP Home Edition Very Old Windows System
root (hd1,0)
savedefault
makeactive
map (hd0) (hd1)
map (hd1) (hd0)
chainloader +1
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title Ubuntu, kernel 2.6.20-16-generic (on /dev/sdb3) 7.04 Development
root (hd1,2)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=eda15923-9024-441a-ac0b-419ddae669e4 ro quiet splash
initrd /boot/initrd.img-2.6.20-16-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
#title Ubuntu, kernel 2.6.20-16-generic (recovery mode) (on /dev/sdb3)
#root (hd1,2)
#kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=eda15923-9024-441a-ac0b-419ddae669e4 ro single
#initrd /boot/initrd.img-2.6.20-16-generic
#savedefault
#boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
#title Ubuntu, kernel 2.6.20-15-generic (on /dev/sdb3)
#root (hd1,2)
#kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=eda15923-9024-441a-ac0b-419ddae669e4 ro quiet splash
#initrd /boot/initrd.img-2.6.20-15-generic
#savedefault
#boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
#title Ubuntu, kernel 2.6.20-15-generic (recovery mode) (on /dev/sdb3)
#root (hd1,2)
#kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=eda15923-9024-441a-ac0b-419ddae669e4 ro single
#initrd /boot/initrd.img-2.6.20-15-generic
#savedefault
#boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
#title Ubuntu, memtest86+ (on /dev/sdb3)
#root (hd1,2)
#kernel /boot/memtest86+.bin
#savedefault
#boot
=============================== sdb2/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# Entry for /dev/sdb2 :
UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 / ext3 relatime,errors=remount-ro 0 1
# Entry for /dev/sda5 :
UUID=68144d8d-bff8-4026-a9dc-e6a84d7f6db7 none swap sw 0 0
# Entry for /dev/sdb5 :
UUID=e2068918-3db6-4299-8243-69dca387f64c none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/scd1 /media/cdrom1 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
/dev/sdb1 /media/sdb1 ntfs-3g defaults,locale=en_GB.UTF-8 0 0
/dev/sda1 /media/sda1 ntfs-3g defaults,locale=en_GB.UTF-8 0 0
=================== sdb2: Location of files loaded by Grub: ===================
39.9GB: boot/grub/menu.lst
39.9GB: boot/grub/stage2
39.9GB: boot/initrd.img-2.6.24-19-generic
39.9GB: boot/initrd.img-2.6.24-19-generic.bak
39.9GB: boot/initrd.img-2.6.24-21-generic
39.9GB: boot/initrd.img-2.6.24-21-generic.bak
39.9GB: boot/initrd.img-2.6.24-22-generic
39.9GB: boot/initrd.img-2.6.24-22-generic.bak
39.9GB: boot/initrd.img-2.6.24-23-generic
39.9GB: boot/initrd.img-2.6.24-23-generic.bak
39.9GB: boot/initrd.img-2.6.24-24-generic
39.9GB: boot/initrd.img-2.6.24-24-generic.bak
39.9GB: boot/initrd.img-2.6.24-25-generic
39.9GB: boot/initrd.img-2.6.24-25-generic.bak
39.9GB: boot/vmlinuz-2.6.24-19-generic
39.9GB: boot/vmlinuz-2.6.24-21-generic
39.9GB: boot/vmlinuz-2.6.24-22-generic
39.9GB: boot/vmlinuz-2.6.24-23-generic
39.9GB: boot/vmlinuz-2.6.24-24-generic
39.9GB: boot/vmlinuz-2.6.24-25-generic
39.9GB: initrd.img
39.9GB: initrd.img.old
39.9GB: vmlinuz
39.9GB: vmlinuz.old
=========================== sdb3/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd1,3)
search --no-floppy --fs-uuid --set 7b243d97-6ae2-4709-8426-7717d45824fe
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=4
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-16-generic, USE ME" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd1,3)
search --no-floppy --fs-uuid --set 7b243d97-6ae2-4709-8426-7717d45824fe
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=7b243d97-6ae2-4709-8426-7717d45824fe ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd1,3)
search --no-floppy --fs-uuid --set 7b243d97-6ae2-4709-8426-7717d45824fe
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=7b243d97-6ae2-4709-8426-7717d45824fe ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "/dev/sda1 Windows XP MAPS AND PHOTOS (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set be7c3b1d7c3ad03f
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu 8.04.1, kernel 2.6.24-19-generic (on /dev/sda2)" {
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set eda15923-9024-441a-ac0b-419ddae669e4
linux /boot/vmlinuz-2.6.24-19-generic root=UUID=eda15923-9024-441a-ac0b-419ddae669e4 ro quiet splash
initrd /boot/initrd.img-2.6.24-19-generic
}
menuentry "Ubuntu 8.04.1, memtest86+ (on /dev/sda2)" {
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set eda15923-9024-441a-ac0b-419ddae669e4
linux /boot/memtest86+.bin
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sdb1)" {
insmod ext2
set root=(hd1,1)
search --no-floppy --fs-uuid --set 4f7d2b45-eda2-4a42-a656-92d8a112d5e3
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=4f7d2b45-eda2-4a42-a656-92d8a112d5e3 ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (on /dev/sdb1)" {
insmod ext2
set root=(hd1,1)
search --no-floppy --fs-uuid --set 4f7d2b45-eda2-4a42-a656-92d8a112d5e3
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=4f7d2b45-eda2-4a42-a656-92d8a112d5e3 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu 8.04.3 LTS, kernel 2.6.24-25-generic (on /dev/sdb2)" {
insmod ext2
set root=(hd1,2)
search --no-floppy --fs-uuid --set 1e263d9f-8195-4c98-b0b5-b81b03c084f9
linux /boot/vmlinuz-2.6.24-25-generic root=UUID=1e263d9f-8195-4c98-b0b5-b81b03c084f9 ro quiet splash
initrd /boot/initrd.img-2.6.24-25-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb3/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdb3 during installation
UUID=7b243d97-6ae2-4709-8426-7717d45824fe / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=68144d8d-bff8-4026-a9dc-e6a84d7f6db7 none swap sw 0 0
# swap was on /dev/sdb5 during installation
UUID=e2068918-3db6-4299-8243-69dca387f64c none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdb3: Location of files loaded by Grub: ===================
99.9GB: boot/grub/grub.cfg
99.9GB: boot/initrd.img-2.6.31-16-generic
99.9GB: boot/vmlinuz-2.6.31-16-generic
99.9GB: initrd.img
99.9GB: vmlinuz
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.