bigsmitty64
December 6th, 2009, 09:23 PM
Installed Ubuntu Studio 9.10. I missed someething during the install so now I can't dual boot. I have Vista on one drive and Installed Studio on a separate 1 TB drive. Is it too late to change now so I can dual boot? Its not a HUGE deal but would like the option,due to the fact that I have an iPhone and need iTunes to sync and update it.
Heres my info. Thanks in advance,
Smitty
============================= Boot Info Summary: ==============================
=> Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
sda1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /Windows/System32/winload.exe
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xada241d7
Partition Boot Start End Size Id System
/dev/sda1 * 63 1,941,471,314 1,941,471,252 83 Linux
/dev/sda2 1,941,471,315 1,953,520,064 12,048,750 5 Extended
/dev/sda5 1,941,471,378 1,953,520,064 12,048,687 82 Linux swap / Solaris
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xf7eef7ee
Partition Boot Start End Size Id System
/dev/sdb1 * 63 156,280,319 156,280,257 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
/dev/sda1: UUID="f9ed5b7b-b0e2-4586-92b8-1e02b35007c7" TYPE="ext4"
/dev/sda5: UUID="a9513f5e-8980-4d49-922c-d9ff9082f490" TYPE="swap"
/dev/sdb1: UUID="84E2D584E2D57B3E" TYPE="ntfs"
=============================== "mount" output: ===============================
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/marshall/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=marshall)
/dev/sdb1 on /media/84E2D584E2D57B3E type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,b lksize=4096)
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set f9ed5b7b-b0e2-4586-92b8-1e02b35007c7
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-9-rt" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set f9ed5b7b-b0e2-4586-92b8-1e02b35007c7
linux /boot/vmlinuz-2.6.31-9-rt root=UUID=f9ed5b7b-b0e2-4586-92b8-1e02b35007c7 ro quiet splash
initrd /boot/initrd.img-2.6.31-9-rt
}
menuentry "Ubuntu, Linux 2.6.31-9-rt (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set f9ed5b7b-b0e2-4586-92b8-1e02b35007c7
linux /boot/vmlinuz-2.6.31-9-rt root=UUID=f9ed5b7b-b0e2-4586-92b8-1e02b35007c7 ro single
initrd /boot/initrd.img-2.6.31-9-rt
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=f9ed5b7b-b0e2-4586-92b8-1e02b35007c7 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=a9513f5e-8980-4d49-922c-d9ff9082f490 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sda1: Location of files loaded by Grub: ===================
.0GB: boot/grub/grub.cfg
.0GB: boot/initrd.img-2.6.31-9-rt
.0GB: boot/vmlinuz-2.6.31-9-rt
.0GB: initrd.img
.0GB: vmlinuz
=======Devices which don't seem to have a corresponding hard drive==============
sdc sdd sde sdf
Heres my info. Thanks in advance,
Smitty
============================= Boot Info Summary: ==============================
=> Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
sda1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /Windows/System32/winload.exe
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xada241d7
Partition Boot Start End Size Id System
/dev/sda1 * 63 1,941,471,314 1,941,471,252 83 Linux
/dev/sda2 1,941,471,315 1,953,520,064 12,048,750 5 Extended
/dev/sda5 1,941,471,378 1,953,520,064 12,048,687 82 Linux swap / Solaris
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xf7eef7ee
Partition Boot Start End Size Id System
/dev/sdb1 * 63 156,280,319 156,280,257 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
/dev/sda1: UUID="f9ed5b7b-b0e2-4586-92b8-1e02b35007c7" TYPE="ext4"
/dev/sda5: UUID="a9513f5e-8980-4d49-922c-d9ff9082f490" TYPE="swap"
/dev/sdb1: UUID="84E2D584E2D57B3E" TYPE="ntfs"
=============================== "mount" output: ===============================
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/marshall/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=marshall)
/dev/sdb1 on /media/84E2D584E2D57B3E type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,b lksize=4096)
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set f9ed5b7b-b0e2-4586-92b8-1e02b35007c7
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-9-rt" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set f9ed5b7b-b0e2-4586-92b8-1e02b35007c7
linux /boot/vmlinuz-2.6.31-9-rt root=UUID=f9ed5b7b-b0e2-4586-92b8-1e02b35007c7 ro quiet splash
initrd /boot/initrd.img-2.6.31-9-rt
}
menuentry "Ubuntu, Linux 2.6.31-9-rt (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set f9ed5b7b-b0e2-4586-92b8-1e02b35007c7
linux /boot/vmlinuz-2.6.31-9-rt root=UUID=f9ed5b7b-b0e2-4586-92b8-1e02b35007c7 ro single
initrd /boot/initrd.img-2.6.31-9-rt
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=f9ed5b7b-b0e2-4586-92b8-1e02b35007c7 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=a9513f5e-8980-4d49-922c-d9ff9082f490 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sda1: Location of files loaded by Grub: ===================
.0GB: boot/grub/grub.cfg
.0GB: boot/initrd.img-2.6.31-9-rt
.0GB: boot/vmlinuz-2.6.31-9-rt
.0GB: initrd.img
.0GB: vmlinuz
=======Devices which don't seem to have a corresponding hard drive==============
sdc sdd sde sdf