slippycurb
November 28th, 2009, 09:20 PM
Greetings Oh Mighty Ones From Planet Ubuntu!!!!
The title is probably misleading....as the trouble is most definitively me. Any help from any of you Gorgeous Guys N Gals would make me incredibly happy!!!
I had to recently reinstall vista alongside my pre-existing ubuntu 9.08(I think,could be .04), and low and behold, the mbr is over written. I know I could just install a fresh 9.10, but I have compat-wireless with a special b43 driver I compiled and installed on kernel vmlinuz-2.6.28-15-generic. I would just like to fix the boot up and maybe upgrade to 9.10 online at a later date.
I have the 9.10 live distro and was able to run BOOT_INFO.sh to get the following information for any intelligent aliens that would like to help such a lowly uncouth creature as myself.
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> No boot loader is installed in the MBR of /dev/sdb
sda1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Dell Utility: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sdb1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xa9f9aa9b
Partition Boot Start End Size Id System
/dev/sda1 63 80,324 80,262 de Dell Utility
/dev/sda2 * 81,920 563,703,807 563,621,888 7 HPFS/NTFS
/dev/sda3 563,704,785 625,137,344 61,432,560 83 Linux
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 522 MB, 522452992 bytes
2 heads, 63 sectors/track, 8098 cylinders, total 1020416 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x001432e6
Partition Boot Start End Size Id System
/dev/sdb1 * 32 1,020,415 1,020,384 6 FAT16
blkid -c /dev/null: __________________________________________________ __________
/dev/loop0: TYPE="squashfs"
/dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="3030-3030" TYPE="vfat"
/dev/sda2: UUID="546659D46659B786" TYPE="ntfs"
/dev/sda3: UUID="b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb1: SEC_TYPE="msdos" UUID="3CEA-8D72" TYPE="vfat"
=============================== "mount" output: ===============================
aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
/dev/sr0 on /cdrom type iso9660 (rw)
/dev/loop0 on /rofs type squashfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sdb1 on /media/3CEA-8D72 type vfat (rw,nosuid,nodev,uhelper=devkit,uid=999,gid=999,sh ortname=mixed,dmask=0077,utf8=1,flush)
=========================== sda3/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro single
initrd /boot/initrd.img-2.6.28-16-generic
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda3
title Windows Vista (loader)
rootnoverify (hd0,2)
savedefault
makeactive
chainloader +1
=============================== sda3/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda4 during installation
UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb / ext3 relatime,errors=remount-ro 0 1
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda3: Location of files loaded by Grub: ===================
288.6GB: boot/grub/menu.lst
288.6GB: boot/grub/stage2
288.6GB: boot/initrd.img-2.6.28-11-generic
288.6GB: boot/initrd.img-2.6.28-15-generic
288.6GB: boot/initrd.img-2.6.28-16-generic
288.6GB: boot/initrd.img-2.6.31-wl
288.6GB: boot/vmlinuz-2.6.28-11-generic
288.6GB: boot/vmlinuz-2.6.28-15-generic
288.6GB: boot/vmlinuz-2.6.28-16-generic
288.6GB: initrd.img
288.6GB: initrd.img.old
288.6GB: vmlinuz
288.6GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============
sdc
The title is probably misleading....as the trouble is most definitively me. Any help from any of you Gorgeous Guys N Gals would make me incredibly happy!!!
I had to recently reinstall vista alongside my pre-existing ubuntu 9.08(I think,could be .04), and low and behold, the mbr is over written. I know I could just install a fresh 9.10, but I have compat-wireless with a special b43 driver I compiled and installed on kernel vmlinuz-2.6.28-15-generic. I would just like to fix the boot up and maybe upgrade to 9.10 online at a later date.
I have the 9.10 live distro and was able to run BOOT_INFO.sh to get the following information for any intelligent aliens that would like to help such a lowly uncouth creature as myself.
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> No boot loader is installed in the MBR of /dev/sdb
sda1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Dell Utility: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sdb1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xa9f9aa9b
Partition Boot Start End Size Id System
/dev/sda1 63 80,324 80,262 de Dell Utility
/dev/sda2 * 81,920 563,703,807 563,621,888 7 HPFS/NTFS
/dev/sda3 563,704,785 625,137,344 61,432,560 83 Linux
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 522 MB, 522452992 bytes
2 heads, 63 sectors/track, 8098 cylinders, total 1020416 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x001432e6
Partition Boot Start End Size Id System
/dev/sdb1 * 32 1,020,415 1,020,384 6 FAT16
blkid -c /dev/null: __________________________________________________ __________
/dev/loop0: TYPE="squashfs"
/dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="3030-3030" TYPE="vfat"
/dev/sda2: UUID="546659D46659B786" TYPE="ntfs"
/dev/sda3: UUID="b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb1: SEC_TYPE="msdos" UUID="3CEA-8D72" TYPE="vfat"
=============================== "mount" output: ===============================
aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
/dev/sr0 on /cdrom type iso9660 (rw)
/dev/loop0 on /rofs type squashfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sdb1 on /media/3CEA-8D72 type vfat (rw,nosuid,nodev,uhelper=devkit,uid=999,gid=999,sh ortname=mixed,dmask=0077,utf8=1,flush)
=========================== sda3/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro single
initrd /boot/initrd.img-2.6.28-16-generic
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda3
title Windows Vista (loader)
rootnoverify (hd0,2)
savedefault
makeactive
chainloader +1
=============================== sda3/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda4 during installation
UUID=b7b7a00d-ca2f-4e7f-b183-f58bddefd0bb / ext3 relatime,errors=remount-ro 0 1
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda3: Location of files loaded by Grub: ===================
288.6GB: boot/grub/menu.lst
288.6GB: boot/grub/stage2
288.6GB: boot/initrd.img-2.6.28-11-generic
288.6GB: boot/initrd.img-2.6.28-15-generic
288.6GB: boot/initrd.img-2.6.28-16-generic
288.6GB: boot/initrd.img-2.6.31-wl
288.6GB: boot/vmlinuz-2.6.28-11-generic
288.6GB: boot/vmlinuz-2.6.28-15-generic
288.6GB: boot/vmlinuz-2.6.28-16-generic
288.6GB: initrd.img
288.6GB: initrd.img.old
288.6GB: vmlinuz
288.6GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============
sdc