topsykretts
November 16th, 2009, 02:28 PM
hey guys..i know this topic has been floating around already..ive done my research already..ive downloaded the specific driver..then installed it on ndiswrapper..for most people it either worked or it didnt..well in my case it worked and it didnt.see i installed the driver throught ndis. and network manager can detect my WEP wifi...but when i try to connect to it...the wheel(32bit karmic koala) just keeps turning..then after a minute or so a window pops up and prompts me to put my password in again.when i put the password in..it does it all over again..im really sure i didnt type my password in wrong..is there something i did wrong or something im not doing?by the way when i go to ndiswrapper it says "unable to see if hardware is present".is there any one who can help me?anyone who has had the same problem and or has the same model laptop as he?thanks in advance to whoever can help..i really do not wanna go back to windows!!but if my wifi doesnt work on this laptop..i might have to hackintosh it..or go back to windows*shivers*..oh and one last thing..ive also tried using WICD incase anyone is gonna recommend that..it didnt even detect my wifi..atleaste network manager can detect my wifi..it just wont connect..aynway..here is the model of my laptop and some result from typing in commands at terminal
LAPTOP: TOSHIBA SATELLITE L500D 00F running 32bit ubuntu 9.10
ndiswrapper -l:
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
net8192se : driver installed
device (10EC:8172) present
LSPCI:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h [Turion X2, Athlon X2, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS780MC [Radeon HD 3100 Graphics]
0e:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)
14:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
LSUSB:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f2:b128 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
LSHW -C NETWORK:
*-network
description: Wireless interface
product: Realtek Semiconductor Co., Ltd.
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:0e:00.0
logical name: wlan0
version: 10
serial: 70:1a:04:02:ee:a1
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ndiswrapper+net8192se driverversion=1.55+Realtek Semiconductor Corp. latency=0 multicast=yes wireless=IEEE 802.11g
resources: irq:18 ioport:a000(size=256) memory:f0200000-f0203fff
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:14:00.0
logical name: eth0
version: 02
serial: 00:26:22:37:78:86
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list rom ethernet physical
configuration: broadcast=yes driver=r8169 driverversion=2.3LK-NAPI ip=192.168.1.105 latency=0 multicast=yes
resources: irq:28 ioport:b000(size=256) memory:f0410000-f0410fff(prefetchable) memory:f0400000-f040ffff(prefetchable) memory:f0420000-f043ffff(prefetchable)
also there is a native linux driver..but i dont know how to compile it..can anyone teach me?(newbie here sorry)...here is the link to the native linux driver..
http://launchpadlibrarian.net/339279...12.2009.tar.gz (http://launchpadlibrarian.net/33927923/rtl8192se_linux_2.6.0010.1012.2009.tar.gz)
LAPTOP: TOSHIBA SATELLITE L500D 00F running 32bit ubuntu 9.10
ndiswrapper -l:
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
net8192se : driver installed
device (10EC:8172) present
LSPCI:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h [Turion X2, Athlon X2, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS780MC [Radeon HD 3100 Graphics]
0e:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)
14:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
LSUSB:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f2:b128 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
LSHW -C NETWORK:
*-network
description: Wireless interface
product: Realtek Semiconductor Co., Ltd.
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:0e:00.0
logical name: wlan0
version: 10
serial: 70:1a:04:02:ee:a1
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ndiswrapper+net8192se driverversion=1.55+Realtek Semiconductor Corp. latency=0 multicast=yes wireless=IEEE 802.11g
resources: irq:18 ioport:a000(size=256) memory:f0200000-f0203fff
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:14:00.0
logical name: eth0
version: 02
serial: 00:26:22:37:78:86
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list rom ethernet physical
configuration: broadcast=yes driver=r8169 driverversion=2.3LK-NAPI ip=192.168.1.105 latency=0 multicast=yes
resources: irq:28 ioport:b000(size=256) memory:f0410000-f0410fff(prefetchable) memory:f0400000-f040ffff(prefetchable) memory:f0420000-f043ffff(prefetchable)
also there is a native linux driver..but i dont know how to compile it..can anyone teach me?(newbie here sorry)...here is the link to the native linux driver..
http://launchpadlibrarian.net/339279...12.2009.tar.gz (http://launchpadlibrarian.net/33927923/rtl8192se_linux_2.6.0010.1012.2009.tar.gz)