PDA

View Full Version : [SOLVED] 9.10 webcam a4tech pk-130mg



g00fy11
November 5th, 2009, 07:09 PM
hi, im new in ubuntu and sorry for my english
system ubuntu 9.10 desktop
Linux g00fy-desktop 2.6.31-14-generic

lsusb:

g00fy@g00fy-desktop:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04b8:012d Seiko Epson Corp. Perfection V10/V100 (GT-S600/F650)
Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 09da:0080 A4 Tech Co., Ltd
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 04f2:0402 Chicony Electronics Co., Ltd
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 0ac8:0328 Z-Star Microelectronics Corp. A4Tech PK-130MG
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubdmesg:

[ 0.214384] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.214386] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[ 0.249004] AppArmor: AppArmor Filesystem Enabled
[ 0.249049] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.249051] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.249055] pci 0000:00:01.0: MEM window: 0xe4000000-0xe7ffffff
[ 0.249058] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.249062] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.249063] pci 0000:00:1c.0: IO window: disabled
[ 0.249067] pci 0000:00:1c.0: MEM window: disabled
[ 0.249071] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.249074] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.249077] pci 0000:00:1c.4: IO window: 0xb000-0xbfff
[ 0.249081] pci 0000:00:1c.4: MEM window: 0xe8000000-0xe8ffffff
[ 0.249084] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.249088] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[ 0.249091] pci 0000:00:1c.5: IO window: 0xc000-0xcfff
[ 0.249095] pci 0000:00:1c.5: MEM window: 0xe9000000-0xe9ffffff
[ 0.249099] pci 0000:00:1c.5: PREFETCH window: 0x000000ea000000-0x000000ea0fffff
[ 0.249104] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.249107] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.249111] pci 0000:00:1e.0: MEM window: 0xea100000-0xea1fffff
[ 0.249114] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.249123] alloc irq_desc for 16 on node -1
[ 0.249124] alloc kstat_irqs on node -1
[ 0.249129] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249133] pci 0000:00:01.0: setting latency timer to 64
[ 0.249139] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249142] pci 0000:00:1c.0: setting latency timer to 64
[ 0.249148] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249151] pci 0000:00:1c.4: setting latency timer to 64
[ 0.249157] alloc irq_desc for 17 on node -1
[ 0.249158] alloc kstat_irqs on node -1
[ 0.249161] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.249165] pci 0000:00:1c.5: setting latency timer to 64
[ 0.249170] pci 0000:00:1e.0: setting latency timer to 64
[ 0.249174] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.249176] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.249178] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.249180] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe7ffffff]
[ 0.249182] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.249184] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
[ 0.249186] pci_bus 0000:03: resource 1 mem: [0xe8000000-0xe8ffffff]
[ 0.249188] pci_bus 0000:04: resource 0 io: [0xc000-0xcfff]
[ 0.249190] pci_bus 0000:04: resource 1 mem: [0xe9000000-0xe9ffffff]
[ 0.249192] pci_bus 0000:04: resource 2 pref mem [0xea000000-0xea0fffff]
[ 0.249194] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff]
[ 0.249196] pci_bus 0000:05: resource 1 mem: [0xea100000-0xea1fffff]
[ 0.249198] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.249200] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.249227] NET: Registered protocol family 2
[ 0.249306] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.249553] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.249992] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.250203] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.250205] TCP reno registered
[ 0.250264] NET: Registered protocol family 1
[ 0.250317] Trying to unpack rootfs image as initramfs...
[ 0.406843] Freeing initrd memory: 7705k freed
[ 0.410684] cpufreq-nforce2: No nForce2 chipset.
[ 0.410709] Scanning for low memory corruption every 60 seconds
[ 0.410803] audit: initializing netlink socket (disabled)
[ 0.410819] type=2000 audit(1257450079.408:1): initialized
[ 0.417737] highmem bounce pool size: 64 pages
[ 0.417741] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.418912] VFS: Disk quotas dquot_6.5.2
[ 0.418959] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.419392] fuse init (API version 7.12)
[ 0.419458] msgmni has been set to 1705
[ 0.419628] alg: No test for stdrng (krng)
[ 0.419638] io scheduler noop registered
[ 0.419639] io scheduler anticipatory registered
[ 0.419641] io scheduler deadline registered
[ 0.419674] io scheduler cfq registered (default)
[ 0.419809] pci 0000:01:00.0: Boot video device
[ 0.419908] alloc irq_desc for 24 on node -1
[ 0.419909] alloc kstat_irqs on node -1
[ 0.419918] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.419923] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.420017] alloc irq_desc for 25 on node -1
[ 0.420019] alloc kstat_irqs on node -1
[ 0.420025] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.420032] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.420135] alloc irq_desc for 26 on node -1
[ 0.420136] alloc kstat_irqs on node -1
[ 0.420142] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.420149] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.420248] alloc irq_desc for 27 on node -1
[ 0.420250] alloc kstat_irqs on node -1
[ 0.420256] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.420263] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.420337] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.420414] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.420532] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.420535] ACPI: Power Button [PWRF]
[ 0.420575] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.420578] ACPI: Power Button [PWRB]
[ 0.421023] ACPI: SSDT 7fee7f80 002AE (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.421163] Marking TSC unstable due to TSC halts in idle
[ 0.421186] Switched to high resolution mode on CPU 0
[ 0.421195] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 0.421214] processor LNXCPU:00: registered as cooling_device0
[ 0.421217] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.421390] ACPI: SSDT 7fee8440 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.421555] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 0.421577] processor LNXCPU:01: registered as cooling_device1
[ 0.421580] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.421689] Switched to high resolution mode on CPU 1
[ 0.423096] isapnp: Scanning for PnP cards...
[ 0.776088] isapnp: No Plug & Play device found
[ 0.776990] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.777083] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.777380] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.778211] brd: module loaded
[ 0.778561] loop: module loaded
[ 0.778612] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.778696] ata_piix 0000:00:1f.2: version 2.13
[ 0.778709] alloc irq_desc for 19 on node -1
[ 0.778711] alloc kstat_irqs on node -1
[ 0.778716] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.778720] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.778756] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.778813] scsi0 : ata_piix
[ 0.778875] scsi1 : ata_piix
[ 0.779368] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.779373] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.779391] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.779396] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.779434] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.779472] scsi2 : ata_piix
[ 0.779517] scsi3 : ata_piix
[ 0.779928] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
[ 0.779932] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
[ 0.780223] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.780246] pata_jmicron 0000:03:00.0: setting latency timer to 64
[ 0.780293] scsi4 : pata_jmicron
[ 0.780335] scsi5 : pata_jmicron
[ 0.780859] ata5: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
[ 0.780862] ata6: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
[ 0.781290] Fixed MDIO Bus: probed
[ 0.781317] PPP generic driver version 2.4.2
[ 0.781381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.781393] alloc irq_desc for 18 on node -1
[ 0.781395] alloc kstat_irqs on node -1
[ 0.781399] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.781407] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.781410] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.781446] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.785353] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.785364] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xea205000
[ 0.800514] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.800607] usb usb1: configuration #1 chosen from 1 choice
[ 0.800630] hub 1-0:1.0: USB hub found
[ 0.800637] hub 1-0:1.0: 6 ports detected
[ 0.800683] alloc irq_desc for 23 on node -1
[ 0.800684] alloc kstat_irqs on node -1
[ 0.800687] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.800694] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.800697] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.800720] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.804611] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.804622] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xea204000
[ 0.820017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.820105] usb usb2: configuration #1 chosen from 1 choice
[ 0.820125] hub 2-0:1.0: USB hub found
[ 0.820130] hub 2-0:1.0: 6 ports detected
[ 0.820177] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.820189] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.820208] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.820213] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.820216] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.820246] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.820266] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 0.820324] usb usb3: configuration #1 chosen from 1 choice
[ 0.820344] hub 3-0:1.0: USB hub found
[ 0.820349] hub 3-0:1.0: 2 ports detected
[ 0.820386] alloc irq_desc for 21 on node -1
[ 0.820387] alloc kstat_irqs on node -1
[ 0.820391] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.820395] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.820398] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.820421] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.820446] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[ 0.820510] usb usb4: configuration #1 chosen from 1 choice
[ 0.820530] hub 4-0:1.0: USB hub found
[ 0.820535] hub 4-0:1.0: 2 ports detected
[ 0.820571] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.820575] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.820578] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.820601] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.820621] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
[ 0.820680] usb usb5: configuration #1 chosen from 1 choice
[ 0.820700] hub 5-0:1.0: USB hub found
[ 0.820705] hub 5-0:1.0: 2 ports detected
[ 0.820742] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.820747] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.820750] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.820773] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.820792] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
[ 0.820853] usb usb6: configuration #1 chosen from 1 choice
[ 0.820874] hub 6-0:1.0: USB hub found
[ 0.820879] hub 6-0:1.0: 2 ports detected
[ 0.820915] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.820920] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.820923] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.820948] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.820967] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
[ 0.821024] usb usb7: configuration #1 chosen from 1 choice
[ 0.821046] hub 7-0:1.0: USB hub found
[ 0.821051] hub 7-0:1.0: 2 ports detected
[ 0.821090] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.821095] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.821097] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.821121] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.821140] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[ 0.821200] usb usb8: configuration #1 chosen from 1 choice
[ 0.821220] hub 8-0:1.0: USB hub found
[ 0.821225] hub 8-0:1.0: 2 ports detected
[ 0.821304] PNP: No PS/2 controller found. Probing ports directly.
[ 0.821647] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.821656] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.821732] mice: PS/2 mouse device common for all mice
[ 0.821816] rtc_cmos 00:04: RTC can wake from S4
[ 0.821844] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.821866] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.821943] device-mapper: uevent: version 1.0.3
[ 0.822008] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.822053] device-mapper: multipath: version 1.1.0 loaded
[ 0.822055] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.822137] EISA: Probing bus 0 at eisa.0
[ 0.822160] EISA: Detected 0 cards.
[ 0.822245] cpuidle: using governor ladder
[ 0.822297] cpuidle: using governor menu
[ 0.822679] TCP cubic registered
[ 0.822799] NET: Registered protocol family 10
[ 0.823166] lo: Disabled Privacy Extensions
[ 0.823424] NET: Registered protocol family 17
[ 0.823437] Bluetooth: L2CAP ver 2.13
[ 0.823439] Bluetooth: L2CAP socket layer initialized
[ 0.823441] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.823442] Bluetooth: SCO socket layer initialized
[ 0.823463] Bluetooth: RFCOMM TTY layer initialized
[ 0.823466] Bluetooth: RFCOMM socket layer initialized
[ 0.823467] Bluetooth: RFCOMM ver 1.11
[ 0.825105] Using IPI No-Shortcut mode
[ 0.825190] PM: Resume from disk failed.
[ 0.825201] registered taskstats version 1
[ 0.825326] Magic number: 1:554:697
[ 0.825407] rtc_cmos 00:04: setting system clock to 2009-11-05 19:41:20 UTC (1257450080)
[ 0.825409] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.825411] EDD information not available.
[ 0.944606] ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66
[ 0.960656] ata5.00: configured for UDMA/66
[ 1.106617] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.117221] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.232016] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 1.367251] usb 1-3: configuration #1 chosen from 1 choice
[ 1.446708] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.446719] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.532017] usb 1-6: new high speed USB device using ehci_hcd and address 5
[ 1.592069] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.592086] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.665496] usb 1-6: configuration #1 chosen from 1 choice
[ 1.665844] hub 1-6:1.0: USB hub found
[ 1.666173] hub 1-6:1.0: 4 ports detected
[ 1.712197] ata1.00: HPA unlocked: 976771055 -> 976773168, native 976773168
[ 1.712201] ata1.00: ATA-8: ST3500410AS, CC34, max UDMA/133
[ 1.712203] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.770270] ata1.00: configured for UDMA/133
[ 1.770375] scsi 0:0:0:0: Direct-Access ATA ST3500410AS CC34 PQ: 0 ANSI: 5
[ 1.770473] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.770504] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.770540] sd 0:0:0:0: [sda] Write Protect is off
[ 1.770542] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.770561] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.770664] sda:
[ 1.772171] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5
[ 1.776527] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 1.776633] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.776637] Uniform CD-ROM driver Revision: 3.20
[ 1.776769] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.776804] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.796323] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 1.848974] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.932100] Freeing unused kernel memory: 540k freed
[ 1.932330] Write protecting the kernel text: 4568k
[ 1.932365] Write protecting the kernel read-only data: 1836k
[ 2.011228] usb 2-5: configuration #1 chosen from 1 choice
[ 2.020513] Linux agpgart interface v0.103
[ 2.056136] Floppy drive(s): fd0 is 1.44M
[ 2.062517] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.062537] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.062575] r8169 0000:04:00.0: setting latency timer to 64
[ 2.062619] alloc irq_desc for 28 on node -1
[ 2.062622] alloc kstat_irqs on node -1
[ 2.062638] r8169 0000:04:00.0: irq 28 for MSI/MSI-X
[ 2.063221] eth0: RTL8168c/8111c at 0xf80ee000, 00:1f:d0:96:4a:0b, XID 3c4000c0 IRQ 28
[ 2.077767] FDC 0 is a post-1991 82077
[ 2.090905] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 2.090953] alloc irq_desc for 20 on node -1
[ 2.090955] alloc kstat_irqs on node -1
[ 2.090962] via-rhine 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.104904] eth1: VIA Rhine III at 0xea100000, 00:15:e9:2f:28:69, IRQ 20.
[ 2.105638] eth1: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[ 2.272027] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.444399] usb 3-2: configuration #1 chosen from 1 choice
[ 2.454543] usbcore: registered new interface driver hiddev
[ 2.457530] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3
[ 2.457596] generic-usb 0003:09DA:0080.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Mouse] on usb-0000:00:1a.0-2/input0
[ 2.457607] usbcore: registered new interface driver usbhid
[ 2.457609] usbhid: v2.6:USB HID core driver
[ 2.780517] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 3.051576] usb 4-2: configuration #1 chosen from 1 choice
[ 3.104724] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
[ 3.104777] generic-usb 0003:04F2:0402.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1a.1-2/input0
[ 3.287531] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input5
[ 3.287612] generic-usb 0003:04F2:0402.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1a.1-2/input1
[ 3.496087] xor: automatically using best checksumming function: pIII_sse
[ 3.516004] pIII_sse : 9302.000 MB/sec
[ 3.516006] xor: using function: pIII_sse (9302.000 MB/sec)
[ 3.517862] device-mapper: dm-raid45: initialized v0.2594b
[ 3.604723] PM: Starting manual resume from disk
[ 3.604727] PM: Resume from partition 8:7
[ 3.604729] PM: Checking hibernation image.
[ 3.604941] PM: Resume from disk failed.
[ 3.629823] kjournald starting. Commit interval 5 seconds
[ 3.629847] EXT3-fs: mounted filesystem with writeback data mode.
[ 4.026178] type=1505 audit(1257450083.699:2): operation="profile_load" pid=437 name=/usr/share/gdm/guest-session/Xsession
[ 4.031410] type=1505 audit(1257450083.703:3): operation="profile_load" pid=438 name=/sbin/dhclient3
[ 4.031986] type=1505 audit(1257450083.703:4): operation="profile_load" pid=438 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.032301] type=1505 audit(1257450083.703:5): operation="profile_load" pid=438 name=/usr/lib/connman/scripts/dhclient-script
[ 4.058101] type=1505 audit(1257450083.731:6): operation="profile_load" pid=439 name=/usr/bin/evince
[ 4.067063] type=1505 audit(1257450083.739:7): operation="profile_load" pid=439 name=/usr/bin/evince-previewer
[ 4.072331] type=1505 audit(1257450083.743:8): operation="profile_load" pid=439 name=/usr/bin/evince-thumbnailer
[ 4.083030] type=1505 audit(1257450083.755:9): operation="profile_load" pid=441 name=/usr/lib/cups/backend/cups-pdf
[ 4.083705] type=1505 audit(1257450083.755:10): operation="profile_load" pid=441 name=/usr/sbin/cupsd
[ 4.739531] Adding 2000052k swap on /dev/sda7. Priority:-1 extents:1 across:2000052k
[ 5.328360] EXT3 FS on sda8, internal journal
[ 6.691287] udev: starting version 147
[ 6.733022] kjournald starting. Commit interval 5 seconds
[ 6.733312] EXT3 FS on sda9, internal journal
[ 6.733316] EXT3-fs: mounted filesystem with writeback data mode.
[ 9.063321] udev: renamed network interface eth1 to eth0
[ 9.113057] udev: renamed network interface eth0_rename to eth1
[ 9.285555] alloc irq_desc for 22 on node -1
[ 9.285558] alloc kstat_irqs on node -1
[ 9.285565] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.285592] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.520553] nvidia: module license 'NVIDIA' taints kernel.
[ 9.520557] Disabling lock debugging due to kernel taint
[ 9.773395] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.773405] nvidia 0000:01:00.0: setting latency timer to 64
[ 9.773531] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 9.857044] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 9.864077] lp: driver loaded but no devices found
[ 9.955465] parport_pc 00:09: reported by Plug and Play ACPI
[ 9.955512] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.961054] ppdev: user-space parallel port driver
[ 9.982355] it87: Found IT8718F chip at 0x290, revision 5
[ 9.982363] it87: in3 is VCC (+5V)
[ 10.052711] lp0: using parport0 (interrupt-driven).
[ 10.196335] r8169: eth1: link up
[ 10.196340] r8169: eth1: link up
[ 10.207932] eth0: link down
[ 10.208082] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.252241] coretemp coretemp.0: Using relative temperature scale!
[ 10.252276] coretemp coretemp.1: Using relative temperature scale!
[ 10.587337] Linux video capture interface: v2.00
[ 10.603501] gspca: main v2.6.0 registered
[ 10.632897] gspca: probing 0ac8:0328
[ 10.633340] vc032x: check sensor header 20
[ 10.821804] vc032x: Sensor ID 148c (14)
[ 10.821809] vc032x: Find Sensor MI1320_SOC
[ 10.822759] gspca: probe ok
[ 10.833106] usbcore: registered new interface driver snd-usb-audio
[ 10.833109] usbcore: registered new interface driver vc032x
[ 10.833113] vc032x: registered
[ 11.245620] __ratelimit: 3 callbacks suppressed
[ 11.245622] type=1505 audit(1257442890.919:12): operation="profile_replace" pid=1047 name=/usr/share/gdm/guest-session/Xsession
[ 11.246976] type=1505 audit(1257442890.919:13): operation="profile_replace" pid=1048 name=/sbin/dhclient3
[ 11.247555] type=1505 audit(1257442890.919:14): operation="profile_replace" pid=1048 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 11.247872] type=1505 audit(1257442890.919:15): operation="profile_replace" pid=1048 name=/usr/lib/connman/scripts/dhclient-script
[ 11.250925] type=1505 audit(1257442890.923:16): operation="profile_replace" pid=1049 name=/usr/bin/evince
[ 11.260138] type=1505 audit(1257442890.931:17): operation="profile_replace" pid=1049 name=/usr/bin/evince-previewer
[ 11.266787] type=1505 audit(1257442890.939:18): operation="profile_replace" pid=1049 name=/usr/bin/evince-thumbnailer
[ 11.274353] type=1505 audit(1257442890.947:19): operation="profile_replace" pid=1051 name=/usr/lib/cups/backend/cups-pdf
[ 11.275031] type=1505 audit(1257442890.947:20): operation="profile_replace" pid=1051 name=/usr/sbin/cupsd
[ 11.277050] type=1505 audit(1257442890.951:21): operation="profile_replace" pid=1052 name=/usr/sbin/tcpdump
[ 11.284256] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.938651] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 14.938654] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance
[ 14.938655] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 14.938656] vboxdrv: the usage of hardware performance counters by
[ 14.938657] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 14.938660] vboxdrv: Found 2 processor cores.
[ 14.938735] vboxdrv: fAsync=0 offMin=0x1c2 offMax=0x19e1
[ 14.938782] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 14.938783] vboxdrv: Successfully loaded version 3.0.10 (interface 0x000e0001).
[ 17.408054] CPU0 attaching NULL sched-domain.
[ 17.408058] CPU1 attaching NULL sched-domain.
[ 17.420579] CPU0 attaching sched-domain:
[ 17.420588] domain 0: span 0-1 level MC
[ 17.420590] groups: 0 1
[ 17.420594] domain 1: span 0-1 level CPU
[ 17.420596] groups: 0-1 (__cpu_power = 2048)
[ 17.420600] CPU1 attaching sched-domain:
[ 17.420601] domain 0: span 0-1 level MC
[ 17.420603] groups: 1 0
[ 17.420606] domain 1: span 0-1 level CPU
[ 17.420608] groups: 0-1 (__cpu_power = 2048)
[ 20.572011] eth1: no IPv6 routers present
[ 20.832840] CPU0 attaching NULL sched-domain.
[ 20.832845] CPU1 attaching NULL sched-domain.
[ 20.852096] CPU0 attaching sched-domain:
[ 20.852100] domain 0: span 0-1 level MC
[ 20.852102] groups: 0 1
[ 20.852107] CPU1 attaching sched-domain:
[ 20.852108] domain 0: span 0-1 level MC
[ 20.852110] groups: 1 0
[ 49.807101] process `skype.real' is using obsolete setsockopt SO_BSDCOMPAT
[ 146.224563] usb 4-2: USB disconnect, address 2
[ 165.852043] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 166.126465] usb 4-2: configuration #1 chosen from 1 choice
[ 166.179819] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input7
[ 166.179935] generic-usb 0003:04F2:0402.0004: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1a.1-2/input0
[ 166.311555] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input8
[ 166.311738] generic-usb 0003:04F2:0402.0005: input,hiddev96,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1a.1-2/input1
[ 169.602333] usb 2-5: USB disconnect, address 2
[ 169.602537] gspca: disconnect complete
[ 490.900535] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 491.183828] usb 2-5: configuration #1 chosen from 1 choice
[ 491.184605] gspca: probing 0ac8:0328
[ 491.184797] vc032x: check sensor header 20
[ 491.392654] vc032x: Sensor ID 148c (14)
[ 491.392659] vc032x: Find Sensor MI1320_SOC
[ 491.416486] gspca: probe ok
[ 491.429019] gspca: probing 0ac8:0328
[ 554.593143] usb 2-5: USB disconnect, address 3
[ 554.593275] gspca: disconnect complete
[ 1246.596741] usb 2-5: new high speed USB device using ehci_hcd and address 4
[ 1246.832203] usb 2-5: configuration #1 chosen from 1 choice
[ 1246.832871] gspca: probing 0ac8:0328
[ 1246.833052] vc032x: check sensor header 20
[ 1247.049306] vc032x: Sensor ID 148c (14)
[ 1247.049311] vc032x: Find Sensor MI1320_SOC
[ 1247.050141] gspca: probe ok
[ 1247.051789] gspca: probing 0ac8:0328image from webcam (in cheese):
http://s13.radikal.ru/i186/0910/87/a88254f4ec73.jpg

how to fix this problem?
help me pls, im new in linux and i dont know what to do to fix this strange image.
thanks

g00fy11
November 6th, 2009, 02:48 PM
up

MusJet
November 6th, 2009, 08:18 PM
Hello !

I had same problem with my webcam "0ac8:0302 Z-Star Microelectronics Corp. ZC0302 WebCam". I tried many things to solev, but no success. I think that something with new kernel 2.6.31
I made downgrade to 9.04 and everything is working pretty nice.
Solution: better wait version 9.10 stay more stable.

Cheers,

MusJet

g00fy11
November 6th, 2009, 08:32 PM
MusJet, thank you for your advice, but i'll stay at 9.10

g00fy11
November 10th, 2009, 11:47 PM
Hello,

gauss_gs, (http://ubuntuforums.org/member.php?u=952341) thanks a lot for these advice:

The resolution for this problem is to recompile gspca drivers from source with some modifications of vc032x source.

Before begin, disconnect camera from your PC and do:
$ modprobe -r gspca_vc032x

First, you will need to get source and some required packages:


$ sudo aptitude install mercurial build-essential linux-headers libncurses5-dev
$ hg clone http://linuxtv.org/hg/~jfrancois/gspca/
$ cd gspca
$ sudo make menuconfig
Disable DVB subsystem in menuconfig because you need full configured kernel source to compile DVB (I think, you have only kernel headers installed).

Now, you will need to edit source file at ~/gspca/linux/drivers/media/video/gspca/vc032x.c:



static const struct sensor_info sensor_info_data[] = {
/* sensorId, I2cAdd,<----->IdAdd, VpId, m1, m2, op */
#if 1
<------>{-1,<--><------> 0x80 | 0x30, 0x0a, 0x0000, 0x25, 0x24, 0x05},
Change highlighted #if 1 to #if 0, then do:


$ make all
$ make all install
Then connect camera to your pc. it must work now.



My camera begun work, but image is upside-down.
Now I need a solution to fix upside-down image.

Sorry for my bad english.

g00fy11
November 13th, 2009, 10:53 PM
hi all,
after reinstall system I did do all operations from last post and camera works perfect!
thanks a lot gauss_gs (http://ubuntuforums.org/member.php?u=952341).

gauss_gs
December 21st, 2009, 07:51 PM
If you got upside down image in 640x480 resolution (you probably got it), just use this temporary workaround that Jean-Francois Moine, the gspca developer, sent to me:


...change the line 929:
{0x08, 0x00, 0x27, 0xbb}, {0x20, 0x01, 0x03, 0xbb},
to
{0x08, 0x00, 0x27, 0xbb}, {0x20, 0x01, 0x00, 0xbb},


I hope this is temporary workaround, we're trying to fix it permanently. Confirmed to work with changeset #13845:941722c6ae31 ('tip' at the moment of posting).

MusJet
December 26th, 2009, 12:31 AM
Hello g00fy11 and gauss !
In my case, my webcam Samsung Pleomax
Bus 004 Device 005: ID 0ac8:0302 Z-Star Microelectronics Corp. ZC0302 Webcam
is using modules:

lsmod |grep gspca

gspca_zc3xx 47580 0
gspca_main 22812 1 gspca_zc3xx
videodev 36736 1 gspca_main

Is possible edit file to fix problem ?
Same problem happen here with with image.

Cheers,

MusJet

gauss_gs
December 27th, 2009, 12:45 PM
Detection, flip and freezes fixed in latest version (rev c05cc762eff2 in hg) of gspca source code. Now it doesn't require any changes, just clone repository, recompile from source and everything will be ok.



hg clone http://linuxtv.org/hg/~jfrancois/gspca
cd gspca
### if u doesn't have full kernel source - disable DVB in menuconfig
make menuconfig
make
### unplug the camera here
sudo modprobe -r gspca_vc032x gspca_main
sudo make install
### plug in the camera and enjoy
Thanks to Jean Francois Moine for his beautiful work.

gauss_gs
December 27th, 2009, 12:49 PM
In my case, my webcam Samsung Pleomax
Bus 004 Device 005: ID 0ac8:0302 Z-Star Microelectronics Corp. ZC0302
Is possible edit file to fix problem ?
Same problem happen here with with image.

At first, I need your dmesg output. Next just try to compile latest gspca modules without any changes in source code.

MusJet
December 28th, 2009, 09:42 PM
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 (Ubuntu 2.6.31-16.53-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] modified: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] modified: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] modified: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] modified: 00000000c0000000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37869000 - 37fef7a8
[ 0.000000] Allocated new RAMDISK: 008ad000 - 010337a8
[ 0.000000] Move RAMDISK from 0000000037869000 - 0000000037fef7a7 to 008ad000 - 010337a7
[ 0.000000] ACPI: RSDP 000f6bf0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7fee3040 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 7fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 7fee3180 040E8 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7fee0000 00040
[ 0.000000] ACPI: HPET 7fee73c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 7fee7440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 7fee72c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac0f6] BRK ==> [00008a9000 - 00008ac0f6]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 00010337a8] NEW RAMDISK ==> [00008ad000 - 00010337a8]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f5200] f5200
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523899
[ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1034000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294356 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:40100000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c203e000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519805
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=279aefd2-9834-49c0-8e96-b62a783e8a0e ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10480000 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fee0)
[ 0.000000] Memory: 2051540k/2096000k available (4566k kernel code, 43272k reserved, 2142k data, 540k init, 1186696k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2996.879 MHz processor.
[ 0.001339] Console: colour VGA+ 80x25
[ 0.001341] console [tty0] enabled
[ 0.001448] hpet clockevent registered
[ 0.001450] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001454] Calibrating delay loop (skipped), value calculated using timer frequency.. 5993.75 BogoMIPS (lpj=11987516)
[ 0.001467] Security Framework initialized
[ 0.001481] AppArmor: AppArmor initialized
[ 0.001486] Mount-cache hash table entries: 512
[ 0.001577] Initializing cgroup subsys ns
[ 0.001580] Initializing cgroup subsys cpuacct
[ 0.001583] Initializing cgroup subsys memory
[ 0.001588] Initializing cgroup subsys freezer
[ 0.001589] Initializing cgroup subsys net_cls
[ 0.001599] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001601] CPU: L2 cache: 1024K
[ 0.001603] CPU: Physical Processor ID: 0
[ 0.001604] CPU: Processor Core ID: 0
[ 0.001606] mce: CPU supports 6 MCE banks
[ 0.001611] CPU0: Thermal monitoring enabled (TM1)
[ 0.001614] using mwait in idle threads.
[ 0.001618] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001624] ... version: 2
[ 0.001625] ... bit width: 40
[ 0.001626] ... generic counters: 2
[ 0.001627] ... value mask: 000000ffffffffff
[ 0.001629] ... max period: 000000007fffffff
[ 0.001630] ... fixed-purpose counters: 3
[ 0.001631] ... counter mask: 0000000700000003
[ 0.001634] Checking 'hlt' instruction... OK.
[ 0.017776] ACPI: Core revision 20090521
[ 0.022952] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062643] CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5993.90 BogoMIPS (lpj=11987817)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM1)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.149134] CPU1: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d
[ 0.149144] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152016] Brought up 2 CPUs
[ 0.152018] Total of 2 processors activated (11987.66 BogoMIPS).
[ 0.152059] CPU0 attaching sched-domain:
[ 0.152061] domain 0: span 0-1 level MC
[ 0.152063] groups: 0 1
[ 0.152067] CPU1 attaching sched-domain:
[ 0.152068] domain 0: span 0-1 level MC
[ 0.152070] groups: 1 0
[ 0.152125] Booting paravirtualized kernel on bare hardware
[ 0.152144] regulator: core version 0.5
[ 0.152144] Time: 20:33:25 Date: 12/28/09
[ 0.152144] NET: Registered protocol family 16
[ 0.152148] EISA bus registered
[ 0.152156] ACPI: bus type pci registered
[ 0.152203] PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
[ 0.152205] PCI: MCFG area at c0000000 reserved in E820
[ 0.152206] PCI: Using MMCONFIG for extended config space
[ 0.152208] PCI: Using configuration type 1 for base access
[ 0.152911] bio: create slab <bio-0> at 0
[ 0.152911] ACPI: EC: Look up EC in DSDT
[ 0.158361] ACPI: Interpreter enabled
[ 0.158370] ACPI: (supports S0 S3 S4 S5)
[ 0.158385] ACPI: Using IOAPIC for interrupt routing
[ 0.161023] ACPI: No dock devices found.
[ 0.161086] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.161161] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.161163] pci 0000:00:01.0: PME# disabled
[ 0.161228] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.161231] pci 0000:00:1c.0: PME# disabled
[ 0.161279] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.161282] pci 0000:00:1c.1: PME# disabled
[ 0.161322] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f]
[ 0.161362] pci 0000:00:1d.1: reg 20 io port: [0xe000-0xe01f]
[ 0.161401] pci 0000:00:1d.2: reg 20 io port: [0xe100-0xe11f]
[ 0.161440] pci 0000:00:1d.3: reg 20 io port: [0xe200-0xe21f]
[ 0.161478] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe5100000-0xe51003ff]
[ 0.161612] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.161614] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.161617] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.161620] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.161655] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.161660] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.161665] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.161670] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.161675] pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f]
[ 0.161707] pci 0000:00:1f.2: reg 10 io port: [0xe800-0xe807]
[ 0.161712] pci 0000:00:1f.2: reg 14 io port: [0xe900-0xe903]
[ 0.161716] pci 0000:00:1f.2: reg 18 io port: [0xea00-0xea07]
[ 0.161721] pci 0000:00:1f.2: reg 1c io port: [0xeb00-0xeb03]
[ 0.161726] pci 0000:00:1f.2: reg 20 io port: [0xec00-0xec0f]
[ 0.161745] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.161747] pci 0000:00:1f.2: PME# disabled
[ 0.161786] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.161829] pci 0000:01:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff]
[ 0.161836] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.161844] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe0000000-0xe1ffffff]
[ 0.161848] pci 0000:01:00.0: reg 24 io port: [0xb000-0xb07f]
[ 0.161853] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.161903] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.161905] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.161909] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.161941] pci 0000:00:1c.0: bridge io port: [0xa000-0xafff]
[ 0.161986] pci 0000:03:00.0: reg 10 io port: [0xc000-0xc0ff]
[ 0.162003] pci 0000:03:00.0: reg 18 64bit mmio: [0xe5010000-0xe5010fff]
[ 0.162015] pci 0000:03:00.0: reg 20 64bit mmio: [0xe5000000-0xe500ffff]
[ 0.162022] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.162057] pci 0000:03:00.0: supports D1 D2
[ 0.162059] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162063] pci 0000:03:00.0: PME# disabled
[ 0.162111] pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff]
[ 0.162114] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe4ffffff]
[ 0.162119] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe5000000-0xe50fffff]
[ 0.162149] pci 0000:04:01.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.162190] pci 0000:04:01.0: supports D1 D2
[ 0.162228] pci 0000:00:1e.0: transparent bridge
[ 0.162231] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.162249] pci_bus 0000:00: on NUMA node 0
[ 0.162252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.162369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.162408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.162455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.168978] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.169043] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.169106] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.169169] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.169232] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.169296] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.169360] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.169424] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.169552] SCSI subsystem initialized
[ 0.169579] libata version 3.00 loaded.
[ 0.169579] usbcore: registered new interface driver usbfs
[ 0.169579] usbcore: registered new interface driver hub
[ 0.169579] usbcore: registered new device driver usb
[ 0.169579] ACPI: WMI: Mapper loaded
[ 0.169579] PCI: Using ACPI for IRQ routing
[ 0.180005] Bluetooth: Core ver 2.15
[ 0.180015] NET: Registered protocol family 31
[ 0.180015] Bluetooth: HCI device and connection manager initialized
[ 0.180015] Bluetooth: HCI socket layer initialized
[ 0.180015] NetLabel: Initializing
[ 0.180015] NetLabel: domain hash size = 128
[ 0.180015] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.180023] NetLabel: unlabeled traffic allowed by default
[ 0.180043] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.180047] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.196008] pnp: PnP ACPI init
[ 0.196025] ACPI: bus type pnp registered
[ 0.197443] pnp: PnP ACPI: found 12 devices
[ 0.197445] ACPI: ACPI bus type pnp unregistered
[ 0.197448] PnPBIOS: Disabled by ACPI PNP
[ 0.197456] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.197458] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.197461] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.197463] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.197464] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.197470] system 00:08: ioport range 0x400-0x4cf could not be reserved
[ 0.197474] system 00:09: iomem range 0xc0000000-0xcfffffff has been reserved
[ 0.197478] system 00:0a: iomem range 0xcca00-0xcffff has been reserved
[ 0.197480] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.197482] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.197484] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 0.197486] system 00:0a: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.197488] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.197490] system 00:0a: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.197493] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.197495] system 00:0a: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.197496] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.197499] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.197500] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.197502] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.197504] system 00:0a: iomem range 0xe0000-0xeffff has been reserved
[ 0.232111] AppArmor: AppArmor Filesystem Enabled
[ 0.232143] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.232146] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.232149] pci 0000:00:01.0: MEM window: 0xe0000000-0xe3ffffff
[ 0.232151] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.232154] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.232157] pci 0000:00:1c.0: IO window: 0xa000-0xafff
[ 0.232160] pci 0000:00:1c.0: MEM window: disabled
[ 0.232163] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.232166] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.232168] pci 0000:00:1c.1: IO window: 0xc000-0xcfff
[ 0.232172] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe4ffffff
[ 0.232175] pci 0000:00:1c.1: PREFETCH window: 0x000000e5000000-0x000000e50fffff
[ 0.232180] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.232182] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.232186] pci 0000:00:1e.0: MEM window: disabled
[ 0.232188] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.232196] alloc irq_desc for 16 on node -1
[ 0.232197] alloc kstat_irqs on node -1
[ 0.232201] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.232205] pci 0000:00:01.0: setting latency timer to 64
[ 0.232210] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.232213] pci 0000:00:1c.0: setting latency timer to 64
[ 0.232218] alloc irq_desc for 17 on node -1
[ 0.232219] alloc kstat_irqs on node -1
[ 0.232221] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.232224] pci 0000:00:1c.1: setting latency timer to 64
[ 0.232229] pci 0000:00:1e.0: setting latency timer to 64
[ 0.232232] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.232234] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.232236] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.232237] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe3ffffff]
[ 0.232239] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.232241] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.232242] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.232244] pci_bus 0000:03: resource 1 mem: [0xe4000000-0xe4ffffff]
[ 0.232246] pci_bus 0000:03: resource 2 pref mem [0xe5000000-0xe50fffff]
[ 0.232248] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.232249] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.232251] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.232277] NET: Registered protocol family 2
[ 0.232347] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.232559] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.232855] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.233070] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.233072] TCP reno registered
[ 0.233159] NET: Registered protocol family 1
[ 0.233207] Trying to unpack rootfs image as initramfs...
[ 0.363045] Freeing initrd memory: 7705k freed
[ 0.365565] cpufreq-nforce2: No nForce2 chipset.
[ 0.365586] Scanning for low memory corruption every 60 seconds
[ 0.365660] audit: initializing netlink socket (disabled)
[ 0.365672] type=2000 audit(1262032405.364:1): initialized
[ 0.371421] highmem bounce pool size: 64 pages
[ 0.371425] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.372411] VFS: Disk quotas dquot_6.5.2
[ 0.372452] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.372822] fuse init (API version 7.12)
[ 0.372878] msgmni has been set to 1705
[ 0.373018] alg: No test for stdrng (krng)
[ 0.373028] io scheduler noop registered
[ 0.373029] io scheduler anticipatory registered
[ 0.373031] io scheduler deadline registered
[ 0.373063] io scheduler cfq registered (default)
[ 0.373145] pci 0000:01:00.0: Boot video device
[ 0.373222] alloc irq_desc for 24 on node -1
[ 0.373223] alloc kstat_irqs on node -1
[ 0.373229] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.373234] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.373306] alloc irq_desc for 25 on node -1
[ 0.373307] alloc kstat_irqs on node -1
[ 0.373313] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.373319] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.373403] alloc irq_desc for 26 on node -1
[ 0.373405] alloc kstat_irqs on node -1
[ 0.373410] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.373416] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.373478] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.373530] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.373625] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.373628] ACPI: Power Button [PWRF]
[ 0.373663] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.373665] ACPI: Power Button [PWRB]
[ 0.373857] processor LNXCPU:00: registered as cooling_device0
[ 0.373860] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.373911] processor LNXCPU:01: registered as cooling_device1
[ 0.373914] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.375056] isapnp: Scanning for PnP cards...
[ 0.501167] Switched to high resolution mode on CPU 1
[ 0.504005] Switched to high resolution mode on CPU 0
[ 0.727846] isapnp: No Plug & Play device found
[ 0.728611] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.729486] brd: module loaded
[ 0.729790] loop: module loaded
[ 0.729838] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.729910] ata_piix 0000:00:1f.1: version 2.13
[ 0.729920] alloc irq_desc for 18 on node -1
[ 0.729922] alloc kstat_irqs on node -1
[ 0.729927] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.729952] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.730009] scsi0 : ata_piix
[ 0.730065] scsi1 : ata_piix
[ 0.730492] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.730494] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.730512] alloc irq_desc for 19 on node -1
[ 0.730513] alloc kstat_irqs on node -1
[ 0.730517] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.730521] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.730551] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.730619] scsi2 : ata_piix
[ 0.730658] scsi3 : ata_piix
[ 0.731123] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xec00 irq 19
[ 0.731125] ata4: SATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xec08 irq 19
[ 0.731690] Fixed MDIO Bus: probed
[ 0.731715] PPP generic driver version 2.4.2
[ 0.731783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.731796] alloc irq_desc for 23 on node -1
[ 0.731797] alloc kstat_irqs on node -1
[ 0.731801] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.731810] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.731813] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.731848] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.735746] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.735756] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe5100000
[ 0.748005] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.748064] usb usb1: configuration #1 chosen from 1 choice
[ 0.748083] hub 1-0:1.0: USB hub found
[ 0.748088] hub 1-0:1.0: 8 ports detected
[ 0.748137] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.748149] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.748170] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.748174] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.748177] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.748201] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.748219] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 0.748270] usb usb2: configuration #1 chosen from 1 choice
[ 0.748289] hub 2-0:1.0: USB hub found
[ 0.748294] hub 2-0:1.0: 2 ports detected
[ 0.748326] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.748330] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.748332] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.748356] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.748374] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[ 0.748427] usb usb3: configuration #1 chosen from 1 choice
[ 0.748445] hub 3-0:1.0: USB hub found
[ 0.748449] hub 3-0:1.0: 2 ports detected
[ 0.748482] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.748486] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.748488] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.748514] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.748538] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
[ 0.748590] usb usb4: configuration #1 chosen from 1 choice
[ 0.748607] hub 4-0:1.0: USB hub found
[ 0.748611] hub 4-0:1.0: 2 ports detected
[ 0.748641] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.748645] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.748647] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.748667] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.748690] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[ 0.748740] usb usb5: configuration #1 chosen from 1 choice
[ 0.748757] hub 5-0:1.0: USB hub found
[ 0.748761] hub 5-0:1.0: 2 ports detected
[ 0.748824] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.748826] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.748905] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.748945] mice: PS/2 mouse device common for all mice
[ 0.749013] rtc_cmos 00:04: RTC can wake from S4
[ 0.749036] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.749056] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.749125] device-mapper: uevent: version 1.0.3
[ 0.749194] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.749241] device-mapper: multipath: version 1.1.0 loaded
[ 0.749243] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.749317] EISA: Probing bus 0 at eisa.0
[ 0.749339] EISA: Detected 0 cards.
[ 0.749388] cpuidle: using governor ladder
[ 0.749390] cpuidle: using governor menu
[ 0.749730] TCP cubic registered
[ 0.749833] NET: Registered protocol family 10
[ 0.750145] lo: Disabled Privacy Extensions
[ 0.750373] NET: Registered protocol family 17
[ 0.750385] Bluetooth: L2CAP ver 2.13
[ 0.750387] Bluetooth: L2CAP socket layer initialized
[ 0.750389] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.750390] Bluetooth: SCO socket layer initialized
[ 0.750410] Bluetooth: RFCOMM TTY layer initialized
[ 0.750412] Bluetooth: RFCOMM socket layer initialized
[ 0.750414] Bluetooth: RFCOMM ver 1.11
[ 0.750439] Using IPI No-Shortcut mode
[ 0.750481] PM: Resume from disk failed.
[ 0.750490] registered taskstats version 1
[ 0.750569] Magic number: 5:294:600
[ 0.750623] rtc_cmos 00:04: setting system clock to 2009-12-28 20:33:26 UTC (1262032406)
[ 0.750625] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.750626] EDD information not available.
[ 0.766911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.908339] ata1.00: ATAPI: SONY DVD RW DW-Q30A, YYS7, max UDMA/66
[ 0.908394] ata4.00: HPA unlocked: 156299375 -> 156301488, native 156301488
[ 0.908397] ata4.00: ATA-8: SAMSUNG HD081GJ, GE100-07, max UDMA7
[ 0.908399] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.916409] ata4.00: configured for UDMA/133
[ 0.932305] ata3.00: HPA unlocked: 976771055 -> 976773168, native 976773168
[ 0.932308] ata3.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
[ 0.932309] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.932399] ata1.00: configured for UDMA/66
[ 0.940174] ata3.01: HPA unlocked: 156299375 -> 156301488, native 156301488
[ 0.940177] ata3.01: ATA-7: SAMSUNG HD082GJ, JE100-19, max UDMA7
[ 0.940179] ata3.01: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.948295] ata3.00: configured for UDMA/133
[ 0.948472] scsi 0:0:0:0: CD-ROM SONY DVD RW DW-Q30A YYS7 PQ: 0 ANSI: 5
[ 0.956276] ata3.01: configured for UDMA/133
[ 0.959687] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 0.959689] Uniform CD-ROM driver Revision: 3.20
[ 0.959760] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.959798] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.959860] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 0.959929] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.959979] scsi 2:0:1:0: Direct-Access ATA SAMSUNG HD082GJ JE10 PQ: 0 ANSI: 5
[ 0.960046] sd 2:0:1:0: Attached scsi generic sg2 type 0
[ 0.960072] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.960102] sd 2:0:0:0: [sda] Write Protect is off
[ 0.960104] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.960119] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.960197] sda:
[ 0.960315] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD081GJ GE10 PQ: 0 ANSI: 5
[ 0.960382] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 0.960408] sd 3:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 0.960438] sd 3:0:0:0: [sdc] Write Protect is off
[ 0.960440] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 0.960455] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.960530] sdc: sdc1
[ 0.965640] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 0.966366] sd 2:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 0.966394] sd 2:0:1:0: [sdb] Write Protect is off
[ 0.966396] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.966411] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.966486] sdb: sda1 sda2 sda3
[ 0.971693] sdb1
[ 0.980094] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 0.980192] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.980205] Freeing unused kernel memory: 540k freed
[ 0.980395] Write protecting the kernel text: 4568k
[ 0.980425] Write protecting the kernel read-only data: 1836k
[ 1.057693] Linux agpgart interface v0.103
[ 1.108748] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.108764] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.108794] r8169 0000:03:00.0: setting latency timer to 64
[ 1.108834] alloc irq_desc for 27 on node -1
[ 1.108836] alloc kstat_irqs on node -1
[ 1.108849] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 1.109301] eth0: RTL8168c/8111c at 0xf80bc000, 00:1f:d0:e4:86:1b, XID 3c4000c0 IRQ 27
[ 1.396527] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 1.638659] usb 4-1: configuration #1 chosen from 1 choice
[ 1.944007] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 2.019426] xor: automatically using best checksumming function: pIII_sse
[ 2.035994] pIII_sse : 11003.000 MB/sec
[ 2.035996] xor: using function: pIII_sse (11003.000 MB/sec)
[ 2.037530] device-mapper: dm-raid45: initialized v0.2594b
[ 2.129679] usb 4-2: configuration #1 chosen from 1 choice
[ 2.136933] usbcore: registered new interface driver hiddev
[ 2.166835] input: 2.4G Cordless Mous as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
[ 2.166915] generic-usb 0003:04F3:02F4.0001: input,hiddev96,hidraw0: USB HID v1.11 Mouse [2.4G Cordless Mous] on usb-0000:00:1d.2-2/input0
[ 2.166927] usbcore: registered new interface driver usbhid
[ 2.166930] usbhid: v2.6:USB HID core driver
[ 2.219848] PM: Starting manual resume from disk
[ 2.219851] PM: Resume from partition 8:2
[ 2.219852] PM: Checking hibernation image.
[ 2.220001] PM: Resume from disk failed.
[ 2.238528] kjournald starting. Commit interval 5 seconds
[ 2.238532] EXT3-fs: mounted filesystem with writeback data mode.
[ 2.652836] type=1505 audit(1262032408.401:2): operation="profile_load" pid=438 name=/usr/share/gdm/guest-session/Xsession
[ 2.656618] type=1505 audit(1262032408.405:3): operation="profile_load" pid=439 name=/sbin/dhclient3
[ 2.657109] type=1505 audit(1262032408.405:4): operation="profile_load" pid=439 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 2.657373] type=1505 audit(1262032408.405:5): operation="profile_load" pid=439 name=/usr/lib/connman/scripts/dhclient-script
[ 2.681162] type=1505 audit(1262032408.429:6): operation="profile_load" pid=440 name=/usr/bin/evince
[ 2.689097] type=1505 audit(1262032408.437:7): operation="profile_load" pid=440 name=/usr/bin/evince-previewer
[ 2.693771] type=1505 audit(1262032408.441:8): operation="profile_load" pid=440 name=/usr/bin/evince-thumbnailer
[ 2.713737] type=1505 audit(1262032408.461:9): operation="profile_load" pid=442 name=/usr/lib/cups/backend/cups-pdf
[ 2.714306] type=1505 audit(1262032408.461:10): operation="profile_load" pid=442 name=/usr/sbin/cupsd
[ 11.234678] udev: starting version 147
[ 11.274073] Adding 1461904k swap on /dev/sda2. Priority:-1 extents:1 across:1461904k
[ 11.794719] nvidia: module license 'NVIDIA' taints kernel.
[ 11.794722] Disabling lock debugging due to kernel taint
[ 11.869365] Linux video capture interface: v2.00
[ 11.937920] EXT3 FS on sda1, internal journal
[ 12.046602] intel_rng: FWH not detected
[ 12.047029] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.047036] nvidia 0000:01:00.0: setting latency timer to 64
[ 12.047158] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 12.074351] gspca: main v2.8.0 registered
[ 12.075565] lp: driver loaded but no devices found
[ 12.154083] kjournald starting. Commit interval 5 seconds
[ 12.162642] EXT3 FS on sdb1, internal journal
[ 12.162646] EXT3-fs: mounted filesystem with writeback data mode.
[ 12.199437] kjournald starting. Commit interval 5 seconds
[ 12.199603] EXT3 FS on sdc1, internal journal
[ 12.199607] EXT3-fs: mounted filesystem with writeback data mode.
[ 12.243004] gspca: probing 0ac8:0302
[ 12.289244] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.303771] it87: Found IT8718F chip at 0x290, revision 5
[ 12.303778] it87: in3 is VCC (+5V)
[ 12.459031] zc3xx: probe sif 0x0000
[ 12.490485] coretemp coretemp.0: Using relative temperature scale!
[ 12.490518] coretemp coretemp.1: Using relative temperature scale!
[ 12.504046] zc3xx: probe sensor -> 0000
[ 12.504048] zc3xx: Find Sensor HV7131B
[ 12.508079] gspca: video0 created
[ 12.508090] gspca: probing 0ac8:0302
[ 12.508091] gspca: intf != 0
[ 12.508098] gspca: probing 0ac8:0302
[ 12.508099] gspca: intf != 0
[ 12.508114] usbcore: registered new interface driver zc3xx
[ 12.508116] zc3xx: registered
[ 12.583255] usbcore: registered new interface driver snd-usb-audio
[ 12.703658] C-Media PCI 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 13.118056] kjournald starting. Commit interval 5 seconds
[ 13.118331] EXT3 FS on sda3, internal journal
[ 13.118334] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.511164] r8169: eth0: link up
[ 13.511173] r8169: eth0: link up
[ 13.774099] __ratelimit: 3 callbacks suppressed
[ 13.774102] type=1505 audit(1262032419.521:12): operation="profile_replace" pid=1049 name=/usr/share/gdm/guest-session/Xsession
[ 13.775397] type=1505 audit(1262032419.521:13): operation="profile_replace" pid=1050 name=/sbin/dhclient3
[ 13.775888] type=1505 audit(1262032419.521:14): operation="profile_replace" pid=1050 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 13.776153] type=1505 audit(1262032419.525:15): operation="profile_replace" pid=1050 name=/usr/lib/connman/scripts/dhclient-script
[ 13.779172] type=1505 audit(1262032419.525:16): operation="profile_replace" pid=1051 name=/usr/bin/evince
[ 13.787145] type=1505 audit(1262032419.533:17): operation="profile_replace" pid=1051 name=/usr/bin/evince-previewer
[ 13.791864] type=1505 audit(1262032419.537:18): operation="profile_replace" pid=1051 name=/usr/bin/evince-thumbnailer
[ 13.799106] type=1505 audit(1262032419.545:19): operation="profile_replace" pid=1056 name=/usr/lib/cups/backend/cups-pdf
[ 13.799677] type=1505 audit(1262032419.545:20): operation="profile_replace" pid=1056 name=/usr/sbin/cupsd
[ 13.802079] type=1505 audit(1262032419.549:21): operation="profile_replace" pid=1059 name=/usr/sbin/tcpdump
[ 15.855871] ppdev: user-space parallel port driver
[ 16.295823] CPU0 attaching NULL sched-domain.
[ 16.295828] CPU1 attaching NULL sched-domain.
[ 16.308051] CPU0 attaching sched-domain:
[ 16.308054] domain 0: span 0-1 level MC
[ 16.308056] groups: 0 1
[ 16.308059] domain 1: span 0-1 level CPU
[ 16.308061] groups: 0-1 (__cpu_power = 2048)
[ 16.308065] CPU1 attaching sched-domain:
[ 16.308066] domain 0: span 0-1 level MC
[ 16.308068] groups: 1 0
[ 16.308070] domain 1: span 0-1 level CPU
[ 16.308072] groups: 0-1 (__cpu_power = 2048)
[ 16.542017] CPU0 attaching NULL sched-domain.
[ 16.542022] CPU1 attaching NULL sched-domain.
[ 16.556561] CPU0 attaching sched-domain:
[ 16.556564] domain 0: span 0-1 level MC
[ 16.556567] groups: 0 1
[ 16.556571] CPU1 attaching sched-domain:
[ 16.556573] domain 0: span 0-1 level MC
[ 16.556574] groups: 1 0
[ 24.244517] eth0: no IPv6 routers present

MusJet
December 28th, 2009, 09:45 PM
Hi !

Above my dmesg after cold reboot.

I made:

hg clone http://linuxtv.org/hg/~jfrancois/gspca/
destination directory: gspca
requesting all changes
adding changesets
adding manifests
adding file changes
added 13866 changesets with 34597 changes to 2641 files
updating working directory
1757 files updated, 0 files merged, 0 files removed, 0 files unresolved

after:

make menuconfig
make -C /home/floop/gspca/v4l menuconfig
make[1]: Entering directory `/home/floop/gspca/v4l'
make -C /lib/modules/2.6.31-16-generic/build -f /home/floop/gspca/v4l/Makefile.kernel config-targets=1 mixed-targets=0 dot-config=0 SRCDIR=/lib/modules/2.6.31-16-generic/build v4l-mconf
make[2]: Entering directory `/usr/src/linux-headers-2.6.31-16-generic'
make -f /lib/modules/2.6.31-16-generic/build/scripts/Makefile.build obj=scripts/kconfig hostprogs-y=mconf scripts/kconfig/mconf
*** Unable to find the ncurses libraries or the
*** required header files.
*** 'make menuconfig' requires the ncurses libraries.
***
*** Install ncurses (ncurses-devel) and try again.
***
make[3]: *** [scripts/kconfig/dochecklxdialog] Error 1
make[2]: *** [v4l-mconf] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.31-16-generic'
make[1]: *** [/lib/modules/2.6.31-16-generic/build/scripts/kconfig/mconf] Error 2
make[1]: Leaving directory `/home/floop/gspca/v4l'
make: *** [menuconfig] Error 2

No success ... but I have installed ...

dpkg -l |grep ncurse

ii libncurses5 5.7+20090803-2ubuntu2 shared libraries for terminal handling
ii libncurses5-dev 5.7+20090803-2ubuntu2 developer's libraries and docs for ncurses
ii libncursesw5 5.7+20090803-2ubuntu2 shared libraries for terminal handling (wide
ii mtr-tiny 0.75-2 Full screen ncurses traceroute tool
ii ncurses-base 5.7+20090803-2ubuntu2 basic terminal type definitions
ii ncurses-bin 5.7+20090803-2ubuntu2 terminal-related programs and man pages

dpkg -l |grep headers

ii linux-headers-2.6.31-16 2.6.31-16.53 Header files related to Linux kernel version
ii linux-headers-2.6.31-16-generic 2.6.31-16.53 Linux kernel headers for version 2.6.31 on x
ii linux-headers-generic 2.6.31.16.29 Generic Linux kernel headers

So ... HELP !!!! :)

reallysux
January 4th, 2010, 11:48 PM
Hi!
I have webcam A4Tech PK-52MF.
Same problem as in post, I have last compiled driver from repository.

After some work with webcam I have in core:

when system loading:


[ 6.313230] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.619110] usb 5-1: configuration #1 chosen from 1 choice
[ 7.129805] Linux video capture interface: v2.00
[ 7.177011] gspca: main v2.8.0 registered
[ 7.295550] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 1
6
[ 7.295573] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.334132] gspca: probing 0ac8:0328
[ 7.336104] vc032x: vc0321 check sensor header 20
[ 7.405103] vc032x: Sensor ID 8243 (3)
[ 7.405108] vc032x: Find Sensor MI0360
[ 7.405196] gspca: video0 created
[ 7.405210] gspca: probing 0ac8:0328
[ 7.405211] gspca: intf != 0
[ 7.405220] gspca: probing 0ac8:0328
[ 7.405222] gspca: intf != 0
[ 7.405241] usbcore: registered new interface driver vc032x
[ 7.405244] vc032x: registered


when Im trying to capture video:


[ 1047.161946] gspca: frame overflow 33726 > 32768
[ 1047.386026] gspca: frame overflow 33726 > 32768
[ 1048.090208] gspca: frame overflow 33360 > 32768
[ 1049.082497] gspca: frame overflow 33726 > 32768
[ 1050.554896] gspca: frame overflow 33726 > 32768
[ 1078.815817] gspca: frame overflow 33726 > 32768
[ 1078.975859] gspca: frame overflow 33726 > 32768
[ 1079.263948] gspca: frame overflow 33726 > 32768
[ 1079.423996] gspca: frame overflow 33726 > 32768


Dont know if it can help to determine problem: my webcam can dynamicaly change fps for video - 30 or 15 fps depends of resolution.

Please help.

HansdeGoede
January 8th, 2010, 09:47 AM
Hi!
I have webcam A4Tech PK-52MF.
Same problem as in post, I have last compiled driver from repository.

After some work with webcam I have in core:

when system loading:


[ 6.313230] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.619110] usb 5-1: configuration #1 chosen from 1 choice
[ 7.129805] Linux video capture interface: v2.00
[ 7.177011] gspca: main v2.8.0 registered
[ 7.295550] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 1
6
[ 7.295573] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.334132] gspca: probing 0ac8:0328
[ 7.336104] vc032x: vc0321 check sensor header 20
[ 7.405103] vc032x: Sensor ID 8243 (3)
[ 7.405108] vc032x: Find Sensor MI0360
[ 7.405196] gspca: video0 created
[ 7.405210] gspca: probing 0ac8:0328
[ 7.405211] gspca: intf != 0
[ 7.405220] gspca: probing 0ac8:0328
[ 7.405222] gspca: intf != 0
[ 7.405241] usbcore: registered new interface driver vc032x
[ 7.405244] vc032x: registered


when Im trying to capture video:


[ 1047.161946] gspca: frame overflow 33726 > 32768
[ 1047.386026] gspca: frame overflow 33726 > 32768
[ 1048.090208] gspca: frame overflow 33360 > 32768
[ 1049.082497] gspca: frame overflow 33726 > 32768
[ 1050.554896] gspca: frame overflow 33726 > 32768
[ 1078.815817] gspca: frame overflow 33726 > 32768
[ 1078.975859] gspca: frame overflow 33726 > 32768
[ 1079.263948] gspca: frame overflow 33726 > 32768
[ 1079.423996] gspca: frame overflow 33726 > 32768


Dont know if it can help to determine problem: my webcam can dynamicaly change fps for video - 30 or 15 fps depends of resolution.

Please help.

Hi,

Very recently some work has been done on the gspca vc032x driver, please
check out the latest gscpa development tree, and install that:
hg clone http://linuxtv.org/hg/~jfrancois/gspca/
cd gspca
make menuconfig
make
sudo make install
<reboot>

One of the very recent changes seems to address the frame overflow issue.
If you're still having issues after this feel free to contact me at
hdegoede@redhat.com

Regards,

Hans

alexanderbg
March 27th, 2010, 12:43 PM
Is there a new way ? because the address is death : (http://linuxtv.org/hg/%7Ejfrancois/gspca/)http://linuxtv.org/hg/~jfrancois/gspca/
(http://linuxtv.org/hg/%7Ejfrancois/gspca/)

nenno.s
March 28th, 2010, 10:29 PM
Hey, anyone around?
Same problem here, but i get stuck at:


$ hg clone http://linuxtv.org/hg/~jfrancois/gspca/

because the link is dead

Any ideas? I don't even know if this would solve it, but who knows!

TheGuv
April 11th, 2010, 12:47 PM
At a wild guess, here:

http://linuxtv.org/hg/~hgoede/gspca/

ottoshmidt
July 8th, 2010, 08:20 PM
i had an error on step: make
like:


/home/tama/src/v4l-dvb/v4l/ir-raw-event.c:145: error: implicit declaration of function 'kfifo_in'
/home/tama/src/v4l-dvb/v4l/ir-raw-event.c: In function 'ir_raw_event_handle':
/home/tama/src/v4l-dvb/v4l/ir-raw-event.c:168: error: implicit declaration of function 'kfifo_out'
make[3]: *** [/home/tama/src/v4l-dvb/v4l/ir-raw-event.o] Error 1
make[2]: *** [_module_/home/tama/src/v4l-dvb/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-22-generic'
make[1]: *** [default] Fehler 2
make[1]: Verlasse Verzeichnis '/home/tama/src/v4l-dvb/v4l'
make: *** [all] Fehler 2
and found solution here: http://ubuntuforums.org/showthread.php?t=1479679

so if anyone has got an error try that one. ;)

ottoshmidt
January 1st, 2011, 09:22 PM
At a wild guess, here:

http://linuxtv.org/hg/~hgoede/gspca/



hg clone http://linuxtv.org/hg/~hgoede/gspca/

returned this:


abort: requirement '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">' not supported!

did the name changed again or something else?