Mr Connolly
November 1st, 2009, 07:18 PM
Installed Windows 7, had Ubuntu only before. Restored GRUB. Can't get GRUB to recognise Windows 7 - just flickers at me then goes back to the GRUB straight away when I choose my Windows 7 option.
Provided below are my GRUB, boot info script results and my fdisk. If anybody can help me out here you will earn my eternal love. Thanks.
First off, let me give you the helpful parts;
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro single
initrd /boot/initrd.img-2.6.28-16-generic
### END DEBIAN AUTOMAGIC KERNELS LIST
//Note here is that I did originally have it above the END DEBIAN AUTOMAGIC. This comment has been added in for the code box.
title Windows 7
root (hd0,2)
savedefault
makeactive
chainloader+1
============================= Boot Info Summary: ==============================
=> Grub0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdb
sda1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x000235c7
Partition Boot Start End Size Id System
/dev/sda1 63 353,590,649 353,590,587 83 Linux
/dev/sda2 * 353,590,650 476,471,834 122,881,185 7 HPFS/NTFS
/dev/sda3 476,471,835 488,392,064 11,920,230 5 Extended
/dev/sda5 476,471,898 488,392,064 11,920,167 82 Linux swap / Solaris
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders, total 398297088 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xfa35fa35
Partition Boot Start End Size Id System
/dev/sdb1 * 63 398,283,479 398,283,417 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
/dev/sda1: UUID="dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e" TYPE="ext3"
/dev/sda2: UUID="2D1B23CF66F63C21" TYPE="ntfs"
/dev/sda5: UUID="9b1e1561-0c7f-404d-b778-2ee89fa851bf" TYPE="swap"
/dev/sdb1: UUID="7EBC2727BC26D983" LABEL="Sam" TYPE="ntfs"
=============================== "mount" output: ===============================
/dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
lrm on /lib/modules/2.6.28-16-generic/volatile type tmpfs (rw,mode=755)
securityfs on /sys/kernel/security type securityfs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/sam/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=sam)
=========================== sda1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro single
initrd /boot/initrd.img-2.6.28-16-generic
title Windows 7
root (hd0,2)
savedefault
makeactive
chainloader+1
### END DEBIAN AUTOMAGIC KERNELS LIST
title Windows 7
root (hd0,2)
savedefault
makeactive
chainloader+1
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=9b1e1561-0c7f-404d-b778-2ee89fa851bf none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda1: Location of files loaded by Grub: ===================
29.7GB: boot/grub/menu.lst
76.8GB: boot/grub/stage2
29.7GB: boot/initrd.img-2.6.28-11-generic
29.7GB: boot/initrd.img-2.6.28-15-generic
29.6GB: boot/initrd.img-2.6.28-16-generic
29.7GB: boot/vmlinuz-2.6.28-11-generic
29.7GB: boot/vmlinuz-2.6.28-15-generic
29.7GB: boot/vmlinuz-2.6.28-16-generic
29.6GB: initrd.img
29.7GB: initrd.img.old
29.7GB: vmlinuz
29.7GB: vmlinuz.old
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000235c7
Device Boot Start End Blocks Id System
/dev/sda1 1 22010 176795293+ 83 Linux
/dev/sda2 * 22011 29659 61440592+ 7 HPFS/NTFS
/dev/sda3 29660 30401 5960115 5 Extended
/dev/sda5 29660 30401 5960083+ 82 Linux swap / Solaris
Disk /dev/sdb: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xfa35fa35
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 24792 199141708+ 7 HPFS/NTFS
Provided below are my GRUB, boot info script results and my fdisk. If anybody can help me out here you will earn my eternal love. Thanks.
First off, let me give you the helpful parts;
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro single
initrd /boot/initrd.img-2.6.28-16-generic
### END DEBIAN AUTOMAGIC KERNELS LIST
//Note here is that I did originally have it above the END DEBIAN AUTOMAGIC. This comment has been added in for the code box.
title Windows 7
root (hd0,2)
savedefault
makeactive
chainloader+1
============================= Boot Info Summary: ==============================
=> Grub0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdb
sda1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x000235c7
Partition Boot Start End Size Id System
/dev/sda1 63 353,590,649 353,590,587 83 Linux
/dev/sda2 * 353,590,650 476,471,834 122,881,185 7 HPFS/NTFS
/dev/sda3 476,471,835 488,392,064 11,920,230 5 Extended
/dev/sda5 476,471,898 488,392,064 11,920,167 82 Linux swap / Solaris
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders, total 398297088 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xfa35fa35
Partition Boot Start End Size Id System
/dev/sdb1 * 63 398,283,479 398,283,417 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
/dev/sda1: UUID="dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e" TYPE="ext3"
/dev/sda2: UUID="2D1B23CF66F63C21" TYPE="ntfs"
/dev/sda5: UUID="9b1e1561-0c7f-404d-b778-2ee89fa851bf" TYPE="swap"
/dev/sdb1: UUID="7EBC2727BC26D983" LABEL="Sam" TYPE="ntfs"
=============================== "mount" output: ===============================
/dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
lrm on /lib/modules/2.6.28-16-generic/volatile type tmpfs (rw,mode=755)
securityfs on /sys/kernel/security type securityfs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/sam/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=sam)
=========================== sda1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e ro single
initrd /boot/initrd.img-2.6.28-16-generic
title Windows 7
root (hd0,2)
savedefault
makeactive
chainloader+1
### END DEBIAN AUTOMAGIC KERNELS LIST
title Windows 7
root (hd0,2)
savedefault
makeactive
chainloader+1
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=dd34b6a0-907c-4c9a-a1fa-53be6e77bb2e / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=9b1e1561-0c7f-404d-b778-2ee89fa851bf none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda1: Location of files loaded by Grub: ===================
29.7GB: boot/grub/menu.lst
76.8GB: boot/grub/stage2
29.7GB: boot/initrd.img-2.6.28-11-generic
29.7GB: boot/initrd.img-2.6.28-15-generic
29.6GB: boot/initrd.img-2.6.28-16-generic
29.7GB: boot/vmlinuz-2.6.28-11-generic
29.7GB: boot/vmlinuz-2.6.28-15-generic
29.7GB: boot/vmlinuz-2.6.28-16-generic
29.6GB: initrd.img
29.7GB: initrd.img.old
29.7GB: vmlinuz
29.7GB: vmlinuz.old
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000235c7
Device Boot Start End Blocks Id System
/dev/sda1 1 22010 176795293+ 83 Linux
/dev/sda2 * 22011 29659 61440592+ 7 HPFS/NTFS
/dev/sda3 29660 30401 5960115 5 Extended
/dev/sda5 29660 30401 5960083+ 82 Linux swap / Solaris
Disk /dev/sdb: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xfa35fa35
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 24792 199141708+ 7 HPFS/NTFS