boarder428
October 20th, 2009, 04:03 PM
Still having problems learning to read/edit the boot menu. My goal here was to install Fedora 11 and Jaunty side by side. I first started with Fedora installed and tried to install Jaunty. The Ubuntu Installer did not detect any other Os's on the disk so I let it do a clean install figuring I would re-install Fedora after the Ubuntu install. After installing Fedora I can only boot to Fedora and it's boot manager does not show Ubuntu. I know it's there but cannot seem to figure out how to link the 2 to one boot menu?
============================= Boot Info Summary: ==============================
=> Grub0.97 is installed in the MBR of /dev/sda and looks at sector 205118529
on boot drive #1 for the stage2 file. A stage2 file is at this location on
/dev/sda. Stage2 looks on partition #3 for /grub/grub.conf.
=> No boot loader is installed in the MBR of /dev/sdb
sda1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/menu.lst /grub/grub.conf
sda4: __________________________________________________ _______________________
File system: lvm2pv
Boot sector type: -
Boot sector info:
Mounting failed:
mount: unknown filesystem type 'lvm2pv'
sdb1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x0754010c
Partition Boot Start End Size Id System
/dev/sda1 63 204,800,062 204,800,000 83 Linux
/dev/sda2 482,383,755 488,392,064 6,008,310 5 Extended
/dev/sda5 482,383,818 488,392,064 6,008,247 82 Linux swap / Solaris
/dev/sda3 * 204,800,063 205,209,662 409,600 83 Linux
/dev/sda4 205,209,663 482,383,754 277,174,092 8e Linux LVM
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 2083 MB, 2083520512 bytes
64 heads, 32 sectors/track, 1987 cylinders, total 4069376 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xd2d7b3e8
Partition Boot Start End Size Id System
/dev/sdb1 * 32 4,069,374 4,069,343 6 FAT16
blkid -c /dev/null: __________________________________________________ __________
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="22495310-62a3-4506-b0e1-409dc0bb6297" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda3: UUID="ac524224-8f92-44ff-bfff-d6cc4bb1de5f" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda4: UUID="9ZjgeH-q2Ch-H9Vm-HSe1-Yav0-6UvO-FsmhXR" TYPE="lvm2pv"
/dev/sda5: TYPE="swap" UUID="1c742787-7a0a-4e4c-9a87-41251fad8181"
/dev/sdb1: SEC_TYPE="msdos" UUID="3653-0D32" TYPE="vfat"
=============================== "mount" output: ===============================
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
rootfs on / type rootfs (rw)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sdb1 on /media/disk type vfat (rw,nosuid,nodev,uhelper=hal,shortname=mixed,uid=9 99,utf8,umask=077,flush)
=========================== sda1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=22495310-62a3-4506-b0e1-409dc0bb6297 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=22495310-62a3-4506-b0e1-409dc0bb6297
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid 22495310-62a3-4506-b0e1-409dc0bb6297
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=22495310-62a3-4506-b0e1-409dc0bb6297 ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid 22495310-62a3-4506-b0e1-409dc0bb6297
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=22495310-62a3-4506-b0e1-409dc0bb6297 ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 22495310-62a3-4506-b0e1-409dc0bb6297
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=22495310-62a3-4506-b0e1-409dc0bb6297 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 22495310-62a3-4506-b0e1-409dc0bb6297
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=22495310-62a3-4506-b0e1-409dc0bb6297 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 22495310-62a3-4506-b0e1-409dc0bb6297
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=22495310-62a3-4506-b0e1-409dc0bb6297 / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=1c742787-7a0a-4e4c-9a87-41251fad8181 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda1: Location of files loaded by Grub: ===================
50.3GB: boot/grub/menu.lst
50.3GB: boot/grub/stage2
50.4GB: boot/initrd.img-2.6.28-11-generic
50.3GB: boot/initrd.img-2.6.28-15-generic
50.4GB: boot/vmlinuz-2.6.28-11-generic
50.3GB: boot/vmlinuz-2.6.28-15-generic
50.3GB: initrd.img
50.4GB: initrd.img.old
50.3GB: vmlinuz
50.4GB: vmlinuz.old
============================= sda3/grub/grub.conf: =============================
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,2)
# kernel /vmlinuz-version ro root=/dev/mapper/VolGroup-lv_root
# initrd /initrd-version.img
#boot=/dev/sda
default=0
timeout=1
splashimage=(hd0,2)/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.30.8-64.fc11.i586)
root (hd0,2)
kernel /vmlinuz-2.6.30.8-64.fc11.i586 ro root=/dev/mapper/VolGroup-lv_root rhgb quiet
initrd /initrd-2.6.30.8-64.fc11.i586.img
title Fedora (2.6.29.4-167.fc11.i586)
root (hd0,2)
kernel /vmlinuz-2.6.29.4-167.fc11.i586 ro root=/dev/mapper/VolGroup-lv_root rhgb quiet
initrd /initrd-2.6.29.4-167.fc11.i586.img
=================== sda3: Location of files loaded by Grub: ===================
105.0GB: grub/grub.conf
105.0GB: grub/menu.lst
105.0GB: grub/stage2
104.8GB: initrd-2.6.29.4-167.fc11.i586.img
104.8GB: initrd-2.6.30.8-64.fc11.i586.img
104.8GB: vmlinuz-2.6.29.4-167.fc11.i586
104.8GB: vmlinuz-2.6.30.8-64.fc11.i586
============================= Boot Info Summary: ==============================
=> Grub0.97 is installed in the MBR of /dev/sda and looks at sector 205118529
on boot drive #1 for the stage2 file. A stage2 file is at this location on
/dev/sda. Stage2 looks on partition #3 for /grub/grub.conf.
=> No boot loader is installed in the MBR of /dev/sdb
sda1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/menu.lst /grub/grub.conf
sda4: __________________________________________________ _______________________
File system: lvm2pv
Boot sector type: -
Boot sector info:
Mounting failed:
mount: unknown filesystem type 'lvm2pv'
sdb1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x0754010c
Partition Boot Start End Size Id System
/dev/sda1 63 204,800,062 204,800,000 83 Linux
/dev/sda2 482,383,755 488,392,064 6,008,310 5 Extended
/dev/sda5 482,383,818 488,392,064 6,008,247 82 Linux swap / Solaris
/dev/sda3 * 204,800,063 205,209,662 409,600 83 Linux
/dev/sda4 205,209,663 482,383,754 277,174,092 8e Linux LVM
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 2083 MB, 2083520512 bytes
64 heads, 32 sectors/track, 1987 cylinders, total 4069376 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xd2d7b3e8
Partition Boot Start End Size Id System
/dev/sdb1 * 32 4,069,374 4,069,343 6 FAT16
blkid -c /dev/null: __________________________________________________ __________
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="22495310-62a3-4506-b0e1-409dc0bb6297" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda3: UUID="ac524224-8f92-44ff-bfff-d6cc4bb1de5f" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda4: UUID="9ZjgeH-q2Ch-H9Vm-HSe1-Yav0-6UvO-FsmhXR" TYPE="lvm2pv"
/dev/sda5: TYPE="swap" UUID="1c742787-7a0a-4e4c-9a87-41251fad8181"
/dev/sdb1: SEC_TYPE="msdos" UUID="3653-0D32" TYPE="vfat"
=============================== "mount" output: ===============================
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
rootfs on / type rootfs (rw)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sdb1 on /media/disk type vfat (rw,nosuid,nodev,uhelper=hal,shortname=mixed,uid=9 99,utf8,umask=077,flush)
=========================== sda1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=22495310-62a3-4506-b0e1-409dc0bb6297 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=22495310-62a3-4506-b0e1-409dc0bb6297
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid 22495310-62a3-4506-b0e1-409dc0bb6297
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=22495310-62a3-4506-b0e1-409dc0bb6297 ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid 22495310-62a3-4506-b0e1-409dc0bb6297
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=22495310-62a3-4506-b0e1-409dc0bb6297 ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 22495310-62a3-4506-b0e1-409dc0bb6297
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=22495310-62a3-4506-b0e1-409dc0bb6297 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 22495310-62a3-4506-b0e1-409dc0bb6297
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=22495310-62a3-4506-b0e1-409dc0bb6297 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 22495310-62a3-4506-b0e1-409dc0bb6297
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=22495310-62a3-4506-b0e1-409dc0bb6297 / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=1c742787-7a0a-4e4c-9a87-41251fad8181 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda1: Location of files loaded by Grub: ===================
50.3GB: boot/grub/menu.lst
50.3GB: boot/grub/stage2
50.4GB: boot/initrd.img-2.6.28-11-generic
50.3GB: boot/initrd.img-2.6.28-15-generic
50.4GB: boot/vmlinuz-2.6.28-11-generic
50.3GB: boot/vmlinuz-2.6.28-15-generic
50.3GB: initrd.img
50.4GB: initrd.img.old
50.3GB: vmlinuz
50.4GB: vmlinuz.old
============================= sda3/grub/grub.conf: =============================
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,2)
# kernel /vmlinuz-version ro root=/dev/mapper/VolGroup-lv_root
# initrd /initrd-version.img
#boot=/dev/sda
default=0
timeout=1
splashimage=(hd0,2)/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.30.8-64.fc11.i586)
root (hd0,2)
kernel /vmlinuz-2.6.30.8-64.fc11.i586 ro root=/dev/mapper/VolGroup-lv_root rhgb quiet
initrd /initrd-2.6.30.8-64.fc11.i586.img
title Fedora (2.6.29.4-167.fc11.i586)
root (hd0,2)
kernel /vmlinuz-2.6.29.4-167.fc11.i586 ro root=/dev/mapper/VolGroup-lv_root rhgb quiet
initrd /initrd-2.6.29.4-167.fc11.i586.img
=================== sda3: Location of files loaded by Grub: ===================
105.0GB: grub/grub.conf
105.0GB: grub/menu.lst
105.0GB: grub/stage2
104.8GB: initrd-2.6.29.4-167.fc11.i586.img
104.8GB: initrd-2.6.30.8-64.fc11.i586.img
104.8GB: vmlinuz-2.6.29.4-167.fc11.i586
104.8GB: vmlinuz-2.6.30.8-64.fc11.i586