rhigh44
October 20th, 2009, 02:47 PM
I've searched the forums and tried using the following commands but still getting the same error:
sudo grub
find /boot/grub/stage1
(hd1,0)
root (hd1,0)
setup (hd1)
I've tried setup (hd1,0), setup (hd0). Still getting the error 21. I've included an output file when I ran the boot_info_script program.
Hope this helps in suggesting how to troubleshoot this .
============================= Boot Info Summary: ==============================
=> Grub0.97 is installed in the MBR of /dev/sda and looks on boot drive #2 in
partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Grub0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdc
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: vfat
Boot sector type: -
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 63.
Operating System:
Boot files/dirs:
sdb1: __________________________________________________ _______________________
File system: ext3
Boot sector type: Grub
Boot sector info: Grub0.97 is installed in the boot sector of sdb1 and
looks at sector 285556799 of the same hard drive for
the stage2 file. A stage2 file is at this location on
/dev/sdb. Stage2 looks on partition #1 for
/boot/grub/menu.lst.
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sdb2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive sda: __________________________________________________ ___________________
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x89478947
Partition Boot Start End Size Id System
/dev/sda1 * 63 112,631,714 112,631,652 7 HPFS/NTFS
/dev/sda2 112,631,715 156,296,384 43,664,670 5 Extended
/dev/sda5 112,631,778 156,296,384 43,664,607 bc Unknown
Drive sdb: __________________________________________________ ___________________
Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xf372a05d
Partition Boot Start End Size Id System
/dev/sdb1 63 476,327,249 476,327,187 83 Linux
/dev/sdb2 476,327,250 488,392,064 12,064,815 5 Extended
/dev/sdb5 476,327,313 488,392,064 12,064,752 82 Linux swap / Solaris
Drive sdc: __________________________________________________ ___________________
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xbb37060f
Partition Boot Start End Size Id System
/dev/sdc1 63 1,953,520,064 1,953,520,002 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="403C5A8F3C5A7FB8" TYPE="ntfs"
/dev/sda5: LABEL="ACRONIS SZ" UUID="6258-0351" TYPE="vfat"
/dev/sdb1: UUID="e2574d6a-6e18-4874-8b0d-509a23b55d17" TYPE="ext3"
/dev/sdb5: UUID="ea21c6b8-317f-466c-ac47-888a94429e62" TYPE="swap"
/dev/sdc1: UUID="3C0C86330C85E86A" LABEL="FreeAgent Drive" TYPE="ntfs"
=============================== "mount" output: ===============================
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
rootfs on / type rootfs (rw)
/dev/sr1 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
/dev/sdc1 on /media/FreeAgent Drive type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb1 on /media/disk type ext3 (rw,nosuid,nodev,uhelper=hal)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /NoExecute=OptIn
=========================== sdb1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=e2574d6a-6e18-4874-8b0d-509a23b55d17 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=e2574d6a-6e18-4874-8b0d-509a23b55d17
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid e2574d6a-6e18-4874-8b0d-509a23b55d17
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=e2574d6a-6e18-4874-8b0d-509a23b55d17 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid e2574d6a-6e18-4874-8b0d-509a23b55d17
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=e2574d6a-6e18-4874-8b0d-509a23b55d17 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid e2574d6a-6e18-4874-8b0d-509a23b55d17
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda5
title Acronis Secure Zone
root (hd0,4)
savedefault
makeactive
chainloader +1
=============================== sdb1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdb1 during installation
UUID=e2574d6a-6e18-4874-8b0d-509a23b55d17 / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sdb5 during installation
UUID=ea21c6b8-317f-466c-ac47-888a94429e62 none swap sw 0 0
/dev/scd1 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
/dev/scd1 /media/floppy1 auto rw,user,noauto,exec,utf8 0 0
=================== sdb1: Location of files loaded by Grub: ===================
146.2GB: boot/grub/menu.lst
146.2GB: boot/grub/stage2
146.1GB: boot/initrd.img-2.6.28-11-generic
146.2GB: boot/vmlinuz-2.6.28-11-generic
146.1GB: initrd.img
146.2GB: vmlinuz
sudo grub
find /boot/grub/stage1
(hd1,0)
root (hd1,0)
setup (hd1)
I've tried setup (hd1,0), setup (hd0). Still getting the error 21. I've included an output file when I ran the boot_info_script program.
Hope this helps in suggesting how to troubleshoot this .
============================= Boot Info Summary: ==============================
=> Grub0.97 is installed in the MBR of /dev/sda and looks on boot drive #2 in
partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Grub0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdc
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: vfat
Boot sector type: -
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 63.
Operating System:
Boot files/dirs:
sdb1: __________________________________________________ _______________________
File system: ext3
Boot sector type: Grub
Boot sector info: Grub0.97 is installed in the boot sector of sdb1 and
looks at sector 285556799 of the same hard drive for
the stage2 file. A stage2 file is at this location on
/dev/sdb. Stage2 looks on partition #1 for
/boot/grub/menu.lst.
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sdb2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive sda: __________________________________________________ ___________________
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x89478947
Partition Boot Start End Size Id System
/dev/sda1 * 63 112,631,714 112,631,652 7 HPFS/NTFS
/dev/sda2 112,631,715 156,296,384 43,664,670 5 Extended
/dev/sda5 112,631,778 156,296,384 43,664,607 bc Unknown
Drive sdb: __________________________________________________ ___________________
Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xf372a05d
Partition Boot Start End Size Id System
/dev/sdb1 63 476,327,249 476,327,187 83 Linux
/dev/sdb2 476,327,250 488,392,064 12,064,815 5 Extended
/dev/sdb5 476,327,313 488,392,064 12,064,752 82 Linux swap / Solaris
Drive sdc: __________________________________________________ ___________________
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xbb37060f
Partition Boot Start End Size Id System
/dev/sdc1 63 1,953,520,064 1,953,520,002 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="403C5A8F3C5A7FB8" TYPE="ntfs"
/dev/sda5: LABEL="ACRONIS SZ" UUID="6258-0351" TYPE="vfat"
/dev/sdb1: UUID="e2574d6a-6e18-4874-8b0d-509a23b55d17" TYPE="ext3"
/dev/sdb5: UUID="ea21c6b8-317f-466c-ac47-888a94429e62" TYPE="swap"
/dev/sdc1: UUID="3C0C86330C85E86A" LABEL="FreeAgent Drive" TYPE="ntfs"
=============================== "mount" output: ===============================
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
rootfs on / type rootfs (rw)
/dev/sr1 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
/dev/sdc1 on /media/FreeAgent Drive type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb1 on /media/disk type ext3 (rw,nosuid,nodev,uhelper=hal)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /NoExecute=OptIn
=========================== sdb1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=e2574d6a-6e18-4874-8b0d-509a23b55d17 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=e2574d6a-6e18-4874-8b0d-509a23b55d17
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid e2574d6a-6e18-4874-8b0d-509a23b55d17
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=e2574d6a-6e18-4874-8b0d-509a23b55d17 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid e2574d6a-6e18-4874-8b0d-509a23b55d17
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=e2574d6a-6e18-4874-8b0d-509a23b55d17 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid e2574d6a-6e18-4874-8b0d-509a23b55d17
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda5
title Acronis Secure Zone
root (hd0,4)
savedefault
makeactive
chainloader +1
=============================== sdb1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdb1 during installation
UUID=e2574d6a-6e18-4874-8b0d-509a23b55d17 / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sdb5 during installation
UUID=ea21c6b8-317f-466c-ac47-888a94429e62 none swap sw 0 0
/dev/scd1 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
/dev/scd1 /media/floppy1 auto rw,user,noauto,exec,utf8 0 0
=================== sdb1: Location of files loaded by Grub: ===================
146.2GB: boot/grub/menu.lst
146.2GB: boot/grub/stage2
146.1GB: boot/initrd.img-2.6.28-11-generic
146.2GB: boot/vmlinuz-2.6.28-11-generic
146.1GB: initrd.img
146.2GB: vmlinuz