PDA

View Full Version : [ubuntu] No sound in hp pavilion dv4 series



lapputappu
October 13th, 2009, 12:04 PM
HI i m a new user for ubuntu. My frnd first tym made me introduced with the graphics of ubuntu and i became quite interested in it ,so i ordered a new pack of UBUNTU 9.04 ,ND MADE A FRESH INSTALL. After installation AND downloading the all packages i used the graphics it was really very appreciable but wen i played the sound it was ZERO. I went through the COMPREHENSIVE SOUND PROBLEM SOLUTIONS GUIDE but i got the following error.................................. I m using HP PAVILIO



HI I jst installed ubuntu 9.04 over vista home premium .after installation wen it finished downloading the packages , i tried to play a song .Video was running very nicely but with no audio output .I checked for the ALSA DRIVER as per the instructions in COMPREHENSIVE SOUND PROBLEM SOLUTIONS GUIDE .
STEP 1:- aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0

STEP 2:- lspci -v

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 30f7
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at df300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

after this i went through the alternatives steps described there means uninstalling and reinstalling with compiling the alsamixer .After this process wen i returned bck to the

step 4:- sudo modprobe snd-hda-intel I GOT DIS AS d error msg


WARNING: Error inserting snd_page_alloc (/lib/modules/2.6.28-15-generic/updates/alsa/acore/snd-page-alloc.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.28-15-generic/updates/alsa/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.28-15-generic/updates/alsa/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_hda_intel (/lib/modules/2.6.28-15-generic/updates/alsa/pci/hda/snd-hda-intel.ko): Unknown symbol in module, or unknown parameter (see dmesg)

AND still no sound output

plz sort dis problem i m just fed up with dis problem after installing ubuntu 9.04 .




but after rebooting again i typed
sudo modprobe snd-hda-intel
and d o/p was

rajeev@rajeev-laptop:~$ sudo modprobe snd-hda-intel
rajeev@rajeev-laptop:~$
means dere was no output .........
after going through some more pages i did dis one , typed dmesg and output was


[ 1.005404] pci 0000:00:1c.2: IO window: 0x5000-0x5fff
[ 1.005410] pci 0000:00:1c.2: MEM window: 0xdc200000-0xdd2fffff
[ 1.005415] pci 0000:00:1c.2: PREFETCH window: 0x000000d5000000-0x000000d5ffffff
[ 1.005424] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 1.005427] pci 0000:00:1c.3: IO window: 0x3000-0x4fff
[ 1.005433] pci 0000:00:1c.3: MEM window: 0xdb200000-0xdc1fffff
[ 1.005438] pci 0000:00:1c.3: PREFETCH window: 0x000000d6000000-0x000000d70fffff
[ 1.005447] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 1.005450] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 1.005457] pci 0000:00:1c.4: MEM window: 0xda100000-0xdb1fffff
[ 1.005462] pci 0000:00:1c.4: PREFETCH window: 0x000000d7100000-0x000000d80fffff
[ 1.005470] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
[ 1.005474] pci 0000:00:1c.5: IO window: 0x1000-0x1fff
[ 1.005480] pci 0000:00:1c.5: MEM window: 0xd9100000-0xda0fffff
[ 1.005485] pci 0000:00:1c.5: PREFETCH window: 0x000000d8100000-0x000000d90fffff
[ 1.005493] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 1.005495] pci 0000:00:1e.0: IO window: disabled
[ 1.005502] pci 0000:00:1e.0: MEM window: disabled
[ 1.005506] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.005521] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.005525] pci 0000:00:01.0: setting latency timer to 64
[ 1.005533] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 1.005537] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.005543] pci 0000:00:1c.0: setting latency timer to 64
[ 1.005552] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 1.005556] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.005562] pci 0000:00:1c.1: setting latency timer to 64
[ 1.005572] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.005577] pci 0000:00:1c.2: setting latency timer to 64
[ 1.005586] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.005590] pci 0000:00:1c.3: setting latency timer to 64
[ 1.005599] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.005604] pci 0000:00:1c.4: setting latency timer to 64
[ 1.005612] pci 0000:00:1c.5: enabling device (0000 -> 0003)
[ 1.005616] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.005622] pci 0000:00:1c.5: setting latency timer to 64
[ 1.005630] pci 0000:00:1e.0: setting latency timer to 64
[ 1.005634] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.005637] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.005639] bus: 01 index 0 io port: [0x8000-0x8fff]
[ 1.005641] bus: 01 index 1 mmio: [0xd0000000-0xd2ffffff]
[ 1.005643] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]
[ 1.005645] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.005647] bus: 02 index 0 io port: [0x7000-0x7fff]
[ 1.005649] bus: 02 index 1 mmio: [0xde300000-0xdf2fffff]
[ 1.005651] bus: 02 index 2 mmio: [0xd3000000-0xd3ffffff]
[ 1.005653] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.005655] bus: 03 index 0 io port: [0x6000-0x6fff]
[ 1.005657] bus: 03 index 1 mmio: [0xdd300000-0xde2fffff]
[ 1.005659] bus: 03 index 2 mmio: [0xd4000000-0xd4ffffff]
[ 1.005661] bus: 03 index 3 mmio: [0x0-0x0]
[ 1.005663] bus: 04 index 0 io port: [0x5000-0x5fff]
[ 1.005665] bus: 04 index 1 mmio: [0xdc200000-0xdd2fffff]
[ 1.005667] bus: 04 index 2 mmio: [0xd5000000-0xd5ffffff]
[ 1.005669] bus: 04 index 3 mmio: [0x0-0x0]
[ 1.005671] bus: 05 index 0 io port: [0x3000-0x4fff]
[ 1.005673] bus: 05 index 1 mmio: [0xdb200000-0xdc1fffff]
[ 1.005675] bus: 05 index 2 mmio: [0xd6000000-0xd70fffff]
[ 1.005677] bus: 05 index 3 mmio: [0x0-0x0]
[ 1.005679] bus: 06 index 0 io port: [0x2000-0x2fff]
[ 1.005681] bus: 06 index 1 mmio: [0xda100000-0xdb1fffff]
[ 1.005683] bus: 06 index 2 mmio: [0xd7100000-0xd80fffff]
[ 1.005685] bus: 06 index 3 mmio: [0x0-0x0]
[ 1.005687] bus: 07 index 0 io port: [0x1000-0x1fff]
[ 1.005689] bus: 07 index 1 mmio: [0xd9100000-0xda0fffff]
[ 1.005691] bus: 07 index 2 mmio: [0xd8100000-0xd90fffff]
[ 1.005693] bus: 07 index 3 mmio: [0x0-0x0]
[ 1.005695] bus: 0a index 0 mmio: [0x0-0x0]
[ 1.005697] bus: 0a index 1 mmio: [0x0-0x0]
[ 1.005698] bus: 0a index 2 mmio: [0x0-0x0]
[ 1.005700] bus: 0a index 3 io port: [0x00-0xffff]
[ 1.005702] bus: 0a index 4 mmio: [0x000000-0xffffffff]
[ 1.005710] NET: Registered protocol family 2
[ 1.020053] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.020285] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.020618] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.020798] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.020800] TCP reno registered
[ 1.028077] NET: Registered protocol family 1
[ 1.028189] checking if image is initramfs... it is
[ 1.630291] Freeing initrd memory: 7377k freed
[ 1.630327] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 1.630330] Simple Boot Flag at 0x44 set to 0x1
[ 1.630492] cpufreq: No nForce2 chipset.
[ 1.630618] audit: initializing netlink socket (disabled)
[ 1.630634] type=2000 audit(1253885273.628:1): initialized
[ 1.637741] highmem bounce pool size: 64 pages
[ 1.637746] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.639037] VFS: Disk quotas dquot_6.5.1
[ 1.639096] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.639685] fuse init (API version 7.10)
[ 1.639762] msgmni has been set to 1671
[ 1.639927] alg: No test for stdrng (krng)
[ 1.639936] io scheduler noop registered
[ 1.639938] io scheduler anticipatory registered
[ 1.639940] io scheduler deadline registered
[ 1.639953] io scheduler cfq registered (default)
[ 9.640007] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 17.640007] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 17.640151] pci 0000:01:00.0: Boot video device
[ 17.877433] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 17.877472] pcieport-driver 0000:00:01.0: found MSI capability
[ 17.877497] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 17.877507] pci_express 0000:00:01.0cie00: allocate port service
[ 17.877520] pci_express 0000:00:01.0cie02: allocate port service
[ 17.877532] pci_express 0000:00:01.0cie03: allocate port service
[ 17.877585] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 17.877636] pcieport-driver 0000:00:1c.0: found MSI capability
[ 17.877671] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 17.877687] pci_express 0000:00:1c.0cie00: allocate port service
[ 17.877699] pci_express 0000:00:1c.0cie02: allocate port service
[ 17.877710] pci_express 0000:00:1c.0cie03: allocate port service
[ 17.877786] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 17.877837] pcieport-driver 0000:00:1c.1: found MSI capability
[ 17.877871] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X
[ 17.877888] pci_express 0000:00:1c.1cie00: allocate port service
[ 17.877901] pci_express 0000:00:1c.1cie02: allocate port service
[ 17.877913] pci_express 0000:00:1c.1cie03: allocate port service
[ 17.877988] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 17.878040] pcieport-driver 0000:00:1c.2: found MSI capability
[ 17.878074] pcieport-driver 0000:00:1c.2: irq 2300 for MSI/MSI-X
[ 17.878090] pci_express 0000:00:1c.2cie00: allocate port service
[ 17.878107] pci_express 0000:00:1c.2cie02: allocate port service
[ 17.878119] pci_express 0000:00:1c.2cie03: allocate port service
[ 17.878195] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 17.878246] pcieport-driver 0000:00:1c.3: found MSI capability
[ 17.878281] pcieport-driver 0000:00:1c.3: irq 2299 for MSI/MSI-X
[ 17.878297] pci_express 0000:00:1c.3cie00: allocate port service
[ 17.878309] pci_express 0000:00:1c.3cie02: allocate port service
[ 17.878321] pci_express 0000:00:1c.3cie03: allocate port service
[ 17.878396] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 17.878447] pcieport-driver 0000:00:1c.4: found MSI capability
[ 17.878482] pcieport-driver 0000:00:1c.4: irq 2298 for MSI/MSI-X
[ 17.878498] pci_express 0000:00:1c.4cie00: allocate port service
[ 17.878510] pci_express 0000:00:1c.4cie02: allocate port service
[ 17.878522] pci_express 0000:00:1c.4cie03: allocate port service
[ 17.878598] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 17.878650] pcieport-driver 0000:00:1c.5: found MSI capability
[ 17.878684] pcieport-driver 0000:00:1c.5: irq 2297 for MSI/MSI-X
[ 17.878701] pci_express 0000:00:1c.5cie00: allocate port service
[ 17.878713] pci_express 0000:00:1c.5cie02: allocate port service
[ 17.878725] pci_express 0000:00:1c.5cie03: allocate port service
[ 17.878809] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.879106] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 18.008088] ACPI: AC Adapter [AC] (off-line)
[ 18.233505] ACPI: Battery Slot [BAT0] (battery present)
[ 18.233584] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 18.233587] ACPI: Power Button (FF) [PWRF]
[ 18.233629] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 18.233632] ACPI: Power Button (CM) [PWRB]
[ 18.233673] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 18.233751] ACPI: Lid Switch [LID0]
[ 18.233794] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 18.233804] ACPI: Sleep Button (CM) [SLPB]
[ 18.249799] fan PNP0C0B:00: registered as cooling_device0
[ 18.249804] ACPI: Fan [FAN] (off)
[ 18.250586] ACPI: SSDT BFC77C18, 0265 (r1 PmRef Cpu0Ist 3000 INTL 20060912)
[ 18.251139] ACPI: SSDT BFC75618, 0594 (r1 PmRef Cpu0Cst 3001 INTL 20060912)
[ 18.251752] Monitor-Mwait will be used to enter C-1 state
[ 18.251755] Monitor-Mwait will be used to enter C-2 state
[ 18.251758] Monitor-Mwait will be used to enter C-3 state
[ 18.251771] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 18.251790] processor ACPI_CPU:00: registered as cooling_device1
[ 18.251794] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 18.252283] ACPI: SSDT BFC76E18, 01CF (r1 PmRef ApIst 3000 INTL 20060912)
[ 18.252854] ACPI: SSDT BFC77F18, 008D (r1 PmRef ApCst 3000 INTL 20060912)
[ 18.253559] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 18.253577] processor ACPI_CPU:01: registered as cooling_device2
[ 18.253581] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 18.384665] thermal LNXTHERM:01: registered as thermal_zone0
[ 18.441261] ACPI: Thermal Zone [THRM] (53 C)
[ 18.441318] isapnp: Scanning for PnP cards...
[ 18.797096] isapnp: No Plug & Play device found
[ 18.808739] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 18.809758] brd: module loaded
[ 18.810062] loop: module loaded
[ 18.810123] Fixed MDIO Bus: probed
[ 18.810128] PPP generic driver version 2.4.2
[ 18.810182] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 18.810209] Driver 'sd' needs updating - please use bus_type methods
[ 18.810218] Driver 'sr' needs updating - please use bus_type methods
[ 18.810255] ahci 0000:00:1f.2: version 3.0
[ 18.810270] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 18.810308] ahci 0000:00:1f.2: irq 2296 for MSI/MSI-X
[ 18.810398] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 18.810401] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems
[ 18.810407] ahci 0000:00:1f.2: setting latency timer to 64
[ 18.810678] scsi0 : ahci
[ 18.810760] scsi1 : ahci
[ 18.810812] scsi2 : ahci
[ 18.810863] scsi3 : ahci
[ 18.810917] scsi4 : ahci
[ 18.810967] scsi5 : ahci
[ 18.811140] ata1: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304100 irq 2296
[ 18.811144] ata2: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304180 irq 2296
[ 18.811146] ata3: DUMMY
[ 18.811147] ata4: DUMMY
[ 18.811150] ata5: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304300 irq 2296
[ 18.811153] ata6: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304380 irq 2296
[ 19.292016] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 19.292904] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 19.293001] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 succeeded
[ 19.293093] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 succeeded
[ 19.293096] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 19.293188] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 succeeded
[ 19.293279] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 succeeded
[ 19.293625] ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100
[ 19.293628] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 19.294550] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 19.294647] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 succeeded
[ 19.294650] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 19.294743] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 succeeded
[ 19.294834] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 succeeded
[ 19.295201] ata1.00: configured for UDMA/100
[ 20.196015] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 20.209376] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 succeeded
[ 20.209687] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 20.209952] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 20.209955] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[ 20.210217] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 20.210730] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 20.223423] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
[ 20.237600] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 succeeded
[ 20.237908] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 20.238175] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 20.238178] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[ 20.238440] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 20.238703] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 20.251348] ata2.00: configured for UDMA/100
[ 20.584017] ata5: SATA link down (SStatus 0 SControl 300)
[ 20.920016] ata6: SATA link down (SStatus 0 SControl 300)
[ 20.936099] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5
[ 20.936188] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 20.936204] sd 0:0:0:0: [sda] Write Protect is off
[ 20.936206] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.936231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.936289] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 20.936303] sd 0:0:0:0: [sda] Write Protect is off
[ 20.936305] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.936328] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.936331] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
[ 21.333898] sd 0:0:0:0: [sda] Attached SCSI disk
[ 21.333938] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.334860] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7561S AH03 PQ: 0 ANSI: 5
[ 21.340217] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.340220] Uniform CD-ROM driver Revision: 3.20
[ 21.340304] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 21.340338] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 21.341059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 21.341079] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 21.341093] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 21.341096] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 21.341150] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 21.345059] ehci_hcd 0000:00:1a.7: debug port 1
[ 21.345066] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 21.345080] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdf304c00
[ 21.360009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 21.360070] usb usb1: configuration #1 chosen from 1 choice
[ 21.360095] hub 1-0:1.0: USB hub found
[ 21.360102] hub 1-0:1.0: 4 ports detected
[ 21.360207] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 21.360218] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 21.360221] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 21.360272] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 21.364192] ehci_hcd 0000:00:1d.7: debug port 1
[ 21.364199] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 21.364211] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdf304800
[ 21.376009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 21.376070] usb usb2: configuration #1 chosen from 1 choice
[ 21.376094] hub 2-0:1.0: USB hub found
[ 21.376100] hub 2-0:1.0: 8 ports detected
[ 21.376201] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 21.376218] uhci_hcd: USB Universal Host Controller Interface driver
[ 21.376238] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.376244] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 21.376248] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 21.376285] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 21.376320] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000090e0
[ 21.376392] usb usb3: configuration #1 chosen from 1 choice
[ 21.376415] hub 3-0:1.0: USB hub found
[ 21.376421] hub 3-0:1.0: 2 ports detected
[ 21.376508] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 21.376515] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 21.376518] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 21.376560] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 21.376595] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000090c0
[ 21.376665] usb usb4: configuration #1 chosen from 1 choice
[ 21.376689] hub 4-0:1.0: USB hub found
[ 21.376695] hub 4-0:1.0: 2 ports detected
[ 21.376776] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 21.376783] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 21.376786] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 21.376824] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 21.376850] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000090a0
[ 21.376917] usb usb5: configuration #1 chosen from 1 choice
[ 21.376942] hub 5-0:1.0: USB hub found
[ 21.376948] hub 5-0:1.0: 2 ports detected
[ 21.377027] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 21.377033] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 21.377036] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 21.377078] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 21.377112] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00009080
[ 21.377184] usb usb6: configuration #1 chosen from 1 choice
[ 21.377207] hub 6-0:1.0: USB hub found
[ 21.377214] hub 6-0:1.0: 2 ports detected
[ 21.377293] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 21.377300] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 21.377303] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 21.377350] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 21.377376] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009060
[ 21.377445] usb usb7: configuration #1 chosen from 1 choice
[ 21.377469] hub 7-0:1.0: USB hub found
[ 21.377475] hub 7-0:1.0: 2 ports detected
[ 21.377555] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 21.377562] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 21.377565] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 21.377605] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 21.377640] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009040
[ 21.377709] usb usb8: configuration #1 chosen from 1 choice
[ 21.377734] hub 8-0:1.0: USB hub found
[ 21.377740] hub 8-0:1.0: 2 ports detected
[ 21.377872] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 21.422867] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.422872] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.424039] mice: PS/2 mouse device common for all mice
[ 21.444071] rtc_cmos 00:03: RTC can wake from S4
[ 21.444103] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 21.444136] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 21.444198] device-mapper: uevent: version 1.0.3
[ 21.444277] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 21.444344] device-mapper: multipath: version 1.0.5 loaded
[ 21.444346] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 21.444418] EISA: Probing bus 0 at eisa.0
[ 21.444425] Cannot allocate resource for EISA slot 1
[ 21.444427] Cannot allocate resource for EISA slot 2
[ 21.444429] Cannot allocate resource for EISA slot 3
[ 21.444431] Cannot allocate resource for EISA slot 4
[ 21.444433] Cannot allocate resource for EISA slot 5
[ 21.444435] Cannot allocate resource for EISA slot 6
[ 21.444438] Cannot allocate resource for EISA slot 7
[ 21.444440] Cannot allocate resource for EISA slot 8
[ 21.444441] EISA: Detected 0 cards.
[ 21.444548] cpuidle: using governor ladder
[ 21.444659] cpuidle: using governor menu
[ 21.445149] TCP cubic registered
[ 21.445240] NET: Registered protocol family 10
[ 21.445659] lo: Disabled Privacy Extensions
[ 21.445986] NET: Registered protocol family 17
[ 21.446001] Bluetooth: L2CAP ver 2.11
[ 21.446003] Bluetooth: L2CAP socket layer initialized
[ 21.446006] Bluetooth: SCO (Voice Link) ver 0.6
[ 21.446008] Bluetooth: SCO socket layer initialized
[ 21.446039] Bluetooth: RFCOMM socket layer initialized
[ 21.446046] Bluetooth: RFCOMM TTY layer initialized
[ 21.446047] Bluetooth: RFCOMM ver 1.10
[ 21.446073] Marking TSC unstable due to TSC halts in idle
[ 21.446621] Using IPI No-Shortcut mode
[ 21.446683] registered taskstats version 1
[ 21.446820] Magic number: 9:202:484
[ 21.446906] rtc_cmos 00:03: setting system clock to 2009-09-25 13:28:13 UTC (1253885293)
[ 21.446910] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 21.446911] EDD information not available.
[ 21.447179] Freeing unused kernel memory: 532k freed
[ 21.447329] Write protecting the kernel text: 4116k
[ 21.447387] Write protecting the kernel read-only data: 1528k
[ 21.477719] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 21.776756] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 21.776780] r8169 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 21.776802] r8169 0000:05:00.0: setting latency timer to 64
[ 21.776971] r8169 0000:05:00.0: irq 2295 for MSI/MSI-X
[ 21.777613] eth0: RTL8168c/8111c at 0xf7c6e000, 00:1e:ec:a7:6a:84, XID 3c4000c0 IRQ 2295
[ 21.788525] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 21.949203] usb 2-5: configuration #1 chosen from 1 choice
[ 22.300520] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 22.462555] usb 3-2: configuration #1 chosen from 1 choice
[ 22.519274] PM: Starting manual resume from disk
[ 22.519277] PM: Resume from partition 8:5
[ 22.519279] PM: Checking hibernation image.
[ 22.519434] PM: Resume from disk failed.
[ 22.542689] kjournald starting. Commit interval 5 seconds
[ 22.542700] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.000052] Clocksource tsc unstable (delta = -150783895 ns)
[ 27.634063] udev: starting version 141
[ 27.817524] lis3lv02d: laptop model unknown, using default axes configuration
[ 27.829521] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 27.838166] lis3lv02d driver loaded.
[ 27.867136] acpi device:09: registered as cooling_device3
[ 27.867512] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/device:08/input/input7
[ 27.874194] Linux agpgart interface v0.103
[ 27.893625] ACPI: Video Device [EVGA] (multi-head: yes rom: no post: no)
[ 27.987767] leds-hp-disk driver loaded.
[ 28.005048] iTCO_vendor_support: vendor-support=0
[ 28.018639] ieee80211_crypt: registered algorithm 'NULL'
[ 28.021914] wl: module license 'MIXED/Proprietary' taints kernel.
[ 28.023927] wl 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 28.023941] wl 0000:04:00.0: setting latency timer to 64
[ 28.950710] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 28.950915] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 28.951000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 28.967663] sdhci: Secure Digital Host Controller Interface driver
[ 28.967665] sdhci: Copyright(c) Pierre Ossman
[ 28.969120] sdhci-pci 0000:06:00.0: SDHCI controller found [197b:2382] (rev 0)
[ 28.969142] sdhci-pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 28.969184] sdhci-pci 0000:06:00.0: setting latency timer to 64
[ 28.969251] mmc0: SDHCI controller on PCI [0000:06:00.0] using ADMA
[ 28.969261] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 28.969278] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 28.969285] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[ 28.969293] sdhci-pci 0000:06:00.2: PCI INT A disabled
[ 28.985780] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 29.008439] ieee80211_crypt: registered algorithm 'TKIP'
[ 29.008653] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9
[ 29.046565] Linux video capture interface: v2.00
[ 29.153249] uvcvideo: Found UVC 1.00 device HP Webcam (046d:09b
[ 29.153850] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 29.153866] nvidia 0000:01:00.0: setting latency timer to 64
[ 29.154054] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 29.157464] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input9
[ 29.169502] usbcore: registered new interface driver uvcvideo
[ 29.169529] USB Video Class driver (v0.1.0)
[ 29.287849] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 29.287860] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 29.287955] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 29.287961] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:2130: chipset global capabilities = 0x4401
[ 29.316558] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:771: codec_mask = 0x7
[ 29.330999] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 30.284982] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input10
[ 30.320508] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:618: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 30.322051] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:4508: hda_codec: Unknown model for STAC92HD71BXX, using BIOS defaults
[ 30.322091] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2203: hda_codec: pin nid 0a bios pin config 0221201f
[ 30.322130] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2203: hda_codec: pin nid 0b bios pin config 02a12020
[ 30.322169] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2203: hda_codec: pin nid 0c bios pin config 40f100f8
[ 30.322208] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2203: hda_codec: pin nid 0d bios pin config 90170110
[ 30.322258] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2203: hda_codec: pin nid 0e bios pin config 40f100f1
[ 30.322298] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2203: hda_codec: pin nid 0f bios pin config 40f100f0
[ 30.322336] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2203: hda_codec: pin nid 14 bios pin config 40f100f2
[ 30.322375] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2203: hda_codec: pin nid 18 bios pin config 95a6912e
[ 30.322426] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2203: hda_codec: pin nid 19 bios pin config 40f000f5
[ 30.322464] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2203: hda_codec: pin nid 1e bios pin config 40f000f3
[ 30.322503] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2203: hda_codec: pin nid 1f bios pin config 40f000f6
[ 30.322964] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:3267: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 30.322968] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:3271: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 30.322971] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:3275: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 30.322975] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:3276: mono: mono_out=0x0
[ 30.322977] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:3284: inputs: mic=0xb, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
[ 30.322982] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2655: stac92xx_add_dyn_out_pins: total dac count=2
[ 30.323113] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 30.335191] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:679: hda_generic: no proper input path found
[ 30.335196] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:427: hda_generic: no proper output path found
[ 30.335587] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:1026: hda_generic: no PCM found
[ 30.371298] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input12
[ 30.372152] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave Surround Playback Volume, skipped
[ 30.372156] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave Center Playback Volume, skipped
[ 30.372160] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave LFE Playback Volume, skipped
[ 30.372163] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave Side Playback Volume, skipped
[ 30.372169] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave Speaker Playback Volume, skipped
[ 30.372172] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave External Speaker Playback Volume, skipped
[ 30.372176] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave Speaker2 Playback Volume, skipped
[ 30.372183] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave Surround Playback Switch, skipped
[ 30.372187] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave Center Playback Switch, skipped
[ 30.372190] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave LFE Playback Switch, skipped
[ 30.372194] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave Side Playback Switch, skipped
[ 30.372199] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave Speaker Playback Switch, skipped
[ 30.372203] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave External Speaker Playback Switch, skipped
[ 30.372207] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave Speaker2 Playback Switch, skipped
[ 30.372211] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:1255: Cannot find slave IEC958 Playback Switch, skipped
[ 30.436199] input: HDA Intel at 0xdf300000 irq 22 Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input13
[ 30.436673] input: HDA Intel at 0xdf300000 irq 22 HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input14
[ 30.605193] lp: driver loaded but no devices found
[ 30.674010] Adding 4996172k swap on /dev/sda5. Priority:-1 extents:1 across:4996172k
[ 30.691014] EXT3 FS on sda6, internal journal
[ 31.059473] type=1505 audit(1253865503.109:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2167
[ 31.103623] type=1505 audit(1253865503.153:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2171
[ 31.103722] type=1505 audit(1253865503.153:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2171
[ 31.103763] type=1505 audit(1253865503.153:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2171
[ 31.103799] type=1505 audit(1253865503.153:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2171
[ 31.226243] type=1505 audit(1253865503.277:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2176
[ 31.226406] type=1505 audit(1253865503.277:: operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2176
[ 31.252749] type=1505 audit(1253865503.305:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2180
[ 33.700709] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.700712] Bluetooth: BNEP filters: protocol multicast
[ 33.719796] Bridge firewalling registered
[ 35.149389] ppdev: user-space parallel port driver
[ 38.948451] r8169: eth0: link up
[ 38.948454] r8169: eth0: link up
[ 42.636891] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1434: azx_pcm_prepare: bufsize=0x10000, format=0x31
[ 42.636912] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:822: hda_codec_setup_stream: NID=0x10, stream=0x5, channel=0, format=0x31
[ 42.644555] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:822: hda_codec_setup_stream: NID=0x11, stream=0x5, channel=0, format=0x31
[ 44.172044] eth1: no IPv6 routers present
[ 49.220042] eth0: no IPv6 routers present
[ 53.153342] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1434: azx_pcm_prepare: bufsize=0x3800, format=0x4011
[ 53.196063] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:822: hda_codec_setup_stream: NID=0x12, stream=0x1, channel=0, format=0x4011
[ 53.204494] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1434: azx_pcm_prepare: bufsize=0x3800, format=0x4011
[ 53.248061] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:822: hda_codec_setup_stream: NID=0x12, stream=0x1, channel=0, format=0x4011
[ 58.260705] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:834: hda_codec_cleanup_stream: NID=0x12
[ 58.260729] ALSA /usr/src/modules/alsa-driver/pci/hda/hda_codec.c:834: hda_codec_cleanup_stream: NID=0x12
[ 58.278614] CPU0 attaching NULL sched-domain.
[ 58.278619] CPU1 attaching NULL sched-domain.
[ 58.292580] CPU0 attaching sched-domain:
[ 58.292582] domain 0: span 0-1 level MC
[ 58.292585] groups: 0 1
[ 58.292589] domain 1: span 0-1 level CPU
[ 58.292592] groups: 0-1
[ 58.292596] CPU1 attaching sched-domain:
[ 58.292598] domain 0: span 0-1 level MC
[ 58.292600] groups: 1 0
[ 58.292604] domain 1: span 0-1 level CPU
[ 58.292606] groups: 0-1
[ 3479.012009] CE: hpet increasing min_delta_ns to 15000 nsec
rajeev@rajeev-laptop:~$

dis whole o/p is out of my getting level ............
still i hv no output of sound plz help me ............
i hv been f***ed after installing ubuntu ..........
:sad:

Xander {MP}
October 13th, 2009, 12:08 PM
install beta and you get sound I have the same model hp pavilion dv4 with an intel proc and intel audio card. the only that needs work is the system beep which is more like a buzz then a beep. so far everything is running stable so I recommend you go to the beta of karmic koala.

mhgsys
October 13th, 2009, 12:10 PM
Hey

I noticed you are using a intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)

To get sound working you need to add;


options snd-hda-intel model=3stack-dig
options snd-hda-intel enable_msi=1
options snd-hda-intel single_cmd=1


to /etc/modprobe.d/alsa-base.conf

so; open up a terminal ;
typ;


sudo gedit /etc/modprobe.d/alsa-base.conf


and copy paste the options from above in it at the bottom of the file; save your file, reboot and all should be working.

info from here;
http://ubuntuforums.org/showthread.php?t=940689&page=3

ps; please put codetags around your dmesg output, it's taking a whole page now.
use [ code ] textyouwanttoputincodetags [ /code ] without the space in it to do so.