PDA

View Full Version : [ubuntu] i miss my home sweet home



gioz
July 11th, 2009, 10:03 PM
hello,

actually i use ubuntu,

i wanted to try opensuse.

then installed opensuse on another part.

i can't see ubuntu from opensuse's grub.

my ubuntu : ext4 and 64bit.

take me home.

oldos2er
July 11th, 2009, 10:25 PM
You can either add Ubuntu to Opensuse's grub menu, or restore Ubuntu's grub and add Opensuse to that.

SuperSonic4
July 11th, 2009, 10:26 PM
Since they're likely to use the same grub file just add ubuntu to Opensuse's. If you post out
sudo fdisk -l and point out which one is ubuntu and
cat /boot/grub/menu.lst it should enable someone to tell you how to do it

gioz
July 11th, 2009, 10:38 PM
oh of course ;

actually as you can see my computer is alike tuesday bazaar. i have to access to ubuntu for my files. then i'll install ubuntu clearly (only ubuntu). opensuse ? it's closed prison.


Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x23d923d8

Device Boot Start End Blocks Id System
/dev/sda1 1 15200 122093968+ 7 HPFS/NTFS
/dev/sda2 * 15201 30401 122102032+ 5 Extended
/dev/sda5 15201 15686 3903763+ 82 Linux swap / Solaris
/dev/sda6 23107 30401 58597056 b W95 FAT32
/dev/sda7 15687 18297 20972826 83 Linux
/dev/sda8 18298 23106 38628261 83 Linux

Partition table entries are not in disk order
# Modified by YaST2. Last modification on Sat Jul 11 22:27:37 EEST 2009
default 0
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,6)/boot/message
##YaST - activate

###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 11.1 - 2.6.27.23-0.1
root (hd0,6)
kernel /boot/vmlinuz-2.6.27.23-0.1-default root=/dev/disk/by-id/ata-ST3250410AS_6RY4ZRND-part7 resume=/dev/disk/by-id/ata-ST3250410AS_6RY4ZRND-part5 splash=silent showopts vga=0x31a
initrd /boot/initrd-2.6.27.23-0.1-default

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.1 - 2.6.27.23-0.1
root (hd0,6)
kernel /boot/vmlinuz-2.6.27.23-0.1-default root=/dev/disk/by-id/ata-ST3250410AS_6RY4ZRND-part7 showopts ide=nodma apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x31a
initrd /boot/initrd-2.6.27.23-0.1-default

###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
rootnoverify (hd0,0)
chainloader +1

gioz
July 12th, 2009, 12:11 AM
i've installed ubuntu again.

thanks.

sometimes new beginning is better.

ubuntu forever.

philcamlin
July 12th, 2009, 12:13 AM
ah thats a bummer :(