Mouse leaves image on second screen in Jaunty

[ToFue]

Just upgraded to Jaunty using upgrade feature in synaptic.

I have dual screens that worked, where this didn't occur, in 8.10; When I mouse my mouse from one screen to the next, it leaves an 'imprint' right at the x-over point between the two screens..

I noticed that the upgrade comments the user input 'Identifiers' and driver pointers... anyway I don't see anything in compiz that may give me a clue to this either....

Also, when I went to take a screenshot, the ghosted mouse didn't show up.. so I'm wondering where in variable-world it's floating to show.. The Picture that's attached shows it though..

Thanks to anyone that offers thier two-cents! :D


/etc/X11/xorg.conf


# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Mon Nov 3 08:46:04 UTC 2008

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "ViewSonic VX710"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 85.0
Option "DPMS"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
Option "AddRGBGLXVisuals" "True"
Option "RenderAccel" "True"
Option "Twinview" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "nvidia-auto-select +0+0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "RenderAccel" "True"
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/psaux"
# Option "Emulate3Buttons" "no"
# Option "ZAxisMapping" "4 5"
#EndSection

# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "kbd"
#EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 1280 0
Screen 1 "Screen1" LeftOf "Screen0"
# commented out by update-manager, HAL is now used
# InputDevice "Keyboard0" "CoreKeyboard"
# commented out by update-manager, HAL is now used
# InputDevice "Mouse0" "CorePointer"
EndSection

Section "Device"
Identifier "Device0"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GT"
BusID "PCI:4:0:0"
Driver "nvidia"
Option "NoLogo" "True"
EndSection

Section "Device"
Identifier "Device1"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GT"
BusID "PCI:2:0:0"
Driver "nvidia"
Option "NoLogo" "True"
EndSection

Section "ServerFlags"
Option "Xinerama" "1"
EndSection

[Euphorion]

I have the same problem on an older laptop with SIS Graphic Chips. I am running two screen mode with the SIS drivers from Thomas Winischhofer. With Hardy I did not have this problem in that when moving from one screen to another a ghost mouse pointer is left over. The laptop is running Jaunty.

My big laptop with ATI HD2700 Graphics card does not have this problem here I use the fglrx drivers from AMD.

If anyone knows how to get rid of this slight nag would be nice - Thanks in advance

[ToFue]

bump...

[ToFue]

another ^bump^..