rickprice
May 30th, 2009, 01:45 PM
I have a machine with two hard drives. Initially I had a dual boot system, and have recently upgraded to Ubuntu 9.04 with this setup. All was fine at this point but the system was a little slow and I was not using windows at all, so I decided to clean install Ubuntu from CD.
I therefore re-formatted the primary drive and installed Ubuntu without problems - except that it does not see my other drive at all.
Does anyone know how to tell it that it is there? Info as below:
richard@office-desktop:~$ sudo fdisk -l
[sudo] password for richard:
Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000001
Device Boot Start End Blocks Id System
/dev/sda1 * 1 23947 192354246 83 Linux
/dev/sda2 23948 24321 3004155 5 Extended
/dev/sda5 23948 24321 3004123+ 82 Linux swap / Solaris
richard@office-desktop:~$
richard@office-desktop:~$
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=01f97f46-04bb-47d1-b5db-d6a0c49c2414 / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=238e422f-5aad-4298-b9fd-838f1c1f8401 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
Many thanks for the advice,
Rick
I therefore re-formatted the primary drive and installed Ubuntu without problems - except that it does not see my other drive at all.
Does anyone know how to tell it that it is there? Info as below:
richard@office-desktop:~$ sudo fdisk -l
[sudo] password for richard:
Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000001
Device Boot Start End Blocks Id System
/dev/sda1 * 1 23947 192354246 83 Linux
/dev/sda2 23948 24321 3004155 5 Extended
/dev/sda5 23948 24321 3004123+ 82 Linux swap / Solaris
richard@office-desktop:~$
richard@office-desktop:~$
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=01f97f46-04bb-47d1-b5db-d6a0c49c2414 / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=238e422f-5aad-4298-b9fd-838f1c1f8401 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
Many thanks for the advice,
Rick