tformed
May 21st, 2009, 06:09 PM
This is in continuation to thread:
http://ubuntuforums.org/showthread.php?p=7321662#post7321662
Hopefully someone out there has a solution for me. I have really been getting use to Ubuntu, I would hate to uninstall it (again) and just stick with Windows completely. Somehow I end up installing Ubuntu again, and always with some problem.
I have taken several steps to try and rectify the issue. When my laptop (Asus W3J) boots up and gets past the Asus logo, I am presented with the Grub menu.
I am able to boot up Ubuntu just fine, but when I go ahead and select Windows 7, the computer just restarts and brings me back to the Grub menu screen.
This is what I get when I type the following: sudo bash ~/Desktop/boot_info_script*.sh
============================= Boot Info Summary: ==============================
=> Grub0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #5 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr /Boot/BCD
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sda6: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x5335872d
Partition Boot Start End Size Id System
/dev/sda1 * 2,048 206,847 204,800 7 HPFS/NTFS
/dev/sda2 206,848 153,513,983 153,307,136 7 HPFS/NTFS
/dev/sda3 153,517,140 195,366,464 41,849,325 5 Extended
/dev/sda5 153,517,203 193,535,054 40,017,852 83 Linux
/dev/sda6 193,535,118 195,366,464 1,831,347 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
/dev/sda1: UUID="3A1011231010E821" LABEL="System Reserved" TYPE="ntfs"
/dev/sda2: UUID="FC4822D748229086" TYPE="ntfs"
/dev/sda5: UUID="7ef07a2a-9ad0-464b-9244-6568278fd13d" TYPE="ext3"
/dev/sda6: UUID="70ea9fef-f247-405e-8550-66db0a8fb5a2" TYPE="swap"
=============================== "mount" output: ===============================
/dev/sda5 on / type ext3 (rw,relatime,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
lrm on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=755)
securityfs on /sys/kernel/security type securityfs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/robert/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=robert)
=========================== sda5/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=7ef07a2a-9ad0-464b-9244-6568278fd13d ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=7ef07a2a-9ad0-464b-9244-6568278fd13d
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 7ef07a2a-9ad0-464b-9244-6568278fd13d
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=7ef07a2a-9ad0-464b-9244-6568278fd13d ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 7ef07a2a-9ad0-464b-9244-6568278fd13d
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=7ef07a2a-9ad0-464b-9244-6568278fd13d ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 7ef07a2a-9ad0-464b-9244-6568278fd13d
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows 7 (loader)
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=7ef07a2a-9ad0-464b-9244-6568278fd13d / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=70ea9fef-f247-405e-8550-66db0a8fb5a2 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda5: Location of files loaded by Grub: ===================
86.4GB: boot/grub/menu.lst
86.4GB: boot/grub/stage2
86.2GB: boot/initrd.img-2.6.28-11-generic
86.3GB: boot/vmlinuz-2.6.28-11-generic
86.2GB: initrd.img
86.3GB: vmlinuz
note: I am new to ubuntu and the terminal commands or how the file system works.
Please help.
http://ubuntuforums.org/showthread.php?p=7321662#post7321662
Hopefully someone out there has a solution for me. I have really been getting use to Ubuntu, I would hate to uninstall it (again) and just stick with Windows completely. Somehow I end up installing Ubuntu again, and always with some problem.
I have taken several steps to try and rectify the issue. When my laptop (Asus W3J) boots up and gets past the Asus logo, I am presented with the Grub menu.
I am able to boot up Ubuntu just fine, but when I go ahead and select Windows 7, the computer just restarts and brings me back to the Grub menu screen.
This is what I get when I type the following: sudo bash ~/Desktop/boot_info_script*.sh
============================= Boot Info Summary: ==============================
=> Grub0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #5 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr /Boot/BCD
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sda6: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x5335872d
Partition Boot Start End Size Id System
/dev/sda1 * 2,048 206,847 204,800 7 HPFS/NTFS
/dev/sda2 206,848 153,513,983 153,307,136 7 HPFS/NTFS
/dev/sda3 153,517,140 195,366,464 41,849,325 5 Extended
/dev/sda5 153,517,203 193,535,054 40,017,852 83 Linux
/dev/sda6 193,535,118 195,366,464 1,831,347 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
/dev/sda1: UUID="3A1011231010E821" LABEL="System Reserved" TYPE="ntfs"
/dev/sda2: UUID="FC4822D748229086" TYPE="ntfs"
/dev/sda5: UUID="7ef07a2a-9ad0-464b-9244-6568278fd13d" TYPE="ext3"
/dev/sda6: UUID="70ea9fef-f247-405e-8550-66db0a8fb5a2" TYPE="swap"
=============================== "mount" output: ===============================
/dev/sda5 on / type ext3 (rw,relatime,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
lrm on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=755)
securityfs on /sys/kernel/security type securityfs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/robert/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=robert)
=========================== sda5/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=7ef07a2a-9ad0-464b-9244-6568278fd13d ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=7ef07a2a-9ad0-464b-9244-6568278fd13d
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 7ef07a2a-9ad0-464b-9244-6568278fd13d
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=7ef07a2a-9ad0-464b-9244-6568278fd13d ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 7ef07a2a-9ad0-464b-9244-6568278fd13d
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=7ef07a2a-9ad0-464b-9244-6568278fd13d ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 7ef07a2a-9ad0-464b-9244-6568278fd13d
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows 7 (loader)
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=7ef07a2a-9ad0-464b-9244-6568278fd13d / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=70ea9fef-f247-405e-8550-66db0a8fb5a2 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda5: Location of files loaded by Grub: ===================
86.4GB: boot/grub/menu.lst
86.4GB: boot/grub/stage2
86.2GB: boot/initrd.img-2.6.28-11-generic
86.3GB: boot/vmlinuz-2.6.28-11-generic
86.2GB: initrd.img
86.3GB: vmlinuz
note: I am new to ubuntu and the terminal commands or how the file system works.
Please help.