Aglow,_Phoenix
May 8th, 2009, 08:27 AM
How do I use the NT bootloader to dual boot Windows XP and Ubuntu 8.10? Thank you for your help.
I am attempting to install Ubuntu 8.10 on an exterior second HD. I get a dual boot window where I selected Ubuntu from, then I get a black screen with only a flashing underline in the upper left hand corner. I believe there were no other notices, including no "Please wait, loading . . . "
I ran bootinfoscript.sh and received the following RESULTS.txt:
======== Boot Info Summary: ============
=> HP/Gateway is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb
=> Grub0.97 is installed in the MBR of /dev/sdc and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: Grub0.97 in the file /bootsect.lnx looks at sector 1
of the same hard drive for the stage2 file. A stage2
file is at this location on /dev/sdc. Stage2 looks on
the same partition for /boot/grub/stage2.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________ _______________________
File system: vfat
Boot sector type: HP Recovery
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /ntldr /NTLDR /NTDETECT.COM /ntdetect.com
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 8.10
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sdc2: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdc3: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: Grub in the file /bootsect.lnx looks at sector on boot
drive #-127 for the stage2 file, but no stage2 files
can be found at this location.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x2aea2aea
Partition Boot Start End Size Id System
/dev/sda1 * 9,333,765 390,700,799 381,367,035 7 HPFS/NTFS
/dev/sda2 63 9,333,764 9,333,702 b W95 FAT32
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x9a03910a
Partition Boot Start End Size Id System
/dev/sdb1 63 160,071,659 160,071,597 7 HPFS/NTFS
Drive: sdc ___________________ __________________________________________________ ___
Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x000098ec
Partition Boot Start End Size Id System
/dev/sdc1 * 63 122,881,184 122,881,122 83 Linux
/dev/sdc2 122,881,185 126,977,759 4,096,575 82 Linux swap / Solaris
/dev/sdc3 126,977,760 976,768,064 849,790,305 17 Hidden HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
/dev/sda1: UUID="B634A80934A7CB27" LABEL="1st HD" TYPE="ntfs"
/dev/sda2: LABEL="WINDOWS XP" UUID="423B-2BDF" TYPE="vfat"
/dev/sdb1: UUID="FA082A9F082A5B41" LABEL="Shawn's Documents" TYPE="ntfs"
/dev/sdc1: UUID="b2d1d860-943b-4ba0-8ac8-a0971e54bca1" TYPE="ext3"
/dev/sdc2: UUID="20feffd9-1f3b-4f29-b72d-6bb3763fd20e" TYPE="swap"
/dev/sdc3: UUID="CA4C4A5E4C4A4603" LABEL="Backup HD" TYPE="ntfs"
/dev/loop0: TYPE="squashfs"
=============================== "mount" output: ===============================
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /lib/modules/2.6.27-7-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/modules/2.6.27-7-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
rootfs on / type rootfs (rw)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
/dev/scd1 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sdc3 on /media/Backup HD type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdc1 on /media/disk type ext3 (rw,nosuid,nodev,uhelper=hal)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect
C:\bootsect.lnx="Ubuntu 8.10"
=========================== sdc1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=b2d1d860-943b-4ba0-8ac8-a0971e54bca1 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=b2d1d860-943b-4ba0-8ac8-a0971e54bca1
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.10, kernel 2.6.27-7-generic
uuid b2d1d860-943b-4ba0-8ac8-a0971e54bca1
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=b2d1d860-943b-4ba0-8ac8-a0971e54bca1 ro quiet
initrd /boot/initrd.img-2.6.27-7-generic
quiet
title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid b2d1d860-943b-4ba0-8ac8-a0971e54bca1
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=b2d1d860-943b-4ba0-8ac8-a0971e54bca1 ro single
initrd /boot/initrd.img-2.6.27-7-generic
title Ubuntu 8.10, memtest86+
uuid b2d1d860-943b-4ba0-8ac8-a0971e54bca1
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Home Edition
root (hd0,0)
savedefault
chainloader +1
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows NT/2000/XP
root (hd0,1)
savedefault
chainloader +1
=============================== sdc1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sdc1
UUID=b2d1d860-943b-4ba0-8ac8-a0971e54bca1 / ext3 relatime,errors=remount-ro 0 1
# /dev/sdc2
UUID=20feffd9-1f3b-4f29-b72d-6bb3763fd20e none swap sw 0 0
/dev/scd1 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sdc1: Location of files loaded by Grub: ===================
23.2GB: boot/grub/menu.lst
23.2GB: boot/grub/stage2
23.2GB: boot/initrd.img-2.6.27-7-generic
23.2GB: boot/vmlinuz-2.6.27-7-generic
23.2GB: initrd.img
23.2GB: vmlinuz
=======Devices which don't seem to have a corresponding hard drive==============
sdd sde sdf sdg
=============================== StdErr Messages: ===============================
hexdump: /media/Backup: No such file or directory
hexdump: HD/bootsect.lnx: No such file or directory
./boot_info_script032.sh: line 590: [: -lt: unary operator expected
./boot_info_script032.sh: line 590: [: -lt: unary operator expected
./boot_info_script032.sh: line 590: [: -lt: unary operator expected
I am attempting to install Ubuntu 8.10 on an exterior second HD. I get a dual boot window where I selected Ubuntu from, then I get a black screen with only a flashing underline in the upper left hand corner. I believe there were no other notices, including no "Please wait, loading . . . "
I ran bootinfoscript.sh and received the following RESULTS.txt:
======== Boot Info Summary: ============
=> HP/Gateway is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb
=> Grub0.97 is installed in the MBR of /dev/sdc and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: Grub0.97 in the file /bootsect.lnx looks at sector 1
of the same hard drive for the stage2 file. A stage2
file is at this location on /dev/sdc. Stage2 looks on
the same partition for /boot/grub/stage2.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________ _______________________
File system: vfat
Boot sector type: HP Recovery
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /ntldr /NTLDR /NTDETECT.COM /ntdetect.com
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 8.10
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sdc2: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdc3: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: Grub in the file /bootsect.lnx looks at sector on boot
drive #-127 for the stage2 file, but no stage2 files
can be found at this location.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x2aea2aea
Partition Boot Start End Size Id System
/dev/sda1 * 9,333,765 390,700,799 381,367,035 7 HPFS/NTFS
/dev/sda2 63 9,333,764 9,333,702 b W95 FAT32
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x9a03910a
Partition Boot Start End Size Id System
/dev/sdb1 63 160,071,659 160,071,597 7 HPFS/NTFS
Drive: sdc ___________________ __________________________________________________ ___
Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x000098ec
Partition Boot Start End Size Id System
/dev/sdc1 * 63 122,881,184 122,881,122 83 Linux
/dev/sdc2 122,881,185 126,977,759 4,096,575 82 Linux swap / Solaris
/dev/sdc3 126,977,760 976,768,064 849,790,305 17 Hidden HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
/dev/sda1: UUID="B634A80934A7CB27" LABEL="1st HD" TYPE="ntfs"
/dev/sda2: LABEL="WINDOWS XP" UUID="423B-2BDF" TYPE="vfat"
/dev/sdb1: UUID="FA082A9F082A5B41" LABEL="Shawn's Documents" TYPE="ntfs"
/dev/sdc1: UUID="b2d1d860-943b-4ba0-8ac8-a0971e54bca1" TYPE="ext3"
/dev/sdc2: UUID="20feffd9-1f3b-4f29-b72d-6bb3763fd20e" TYPE="swap"
/dev/sdc3: UUID="CA4C4A5E4C4A4603" LABEL="Backup HD" TYPE="ntfs"
/dev/loop0: TYPE="squashfs"
=============================== "mount" output: ===============================
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /lib/modules/2.6.27-7-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/modules/2.6.27-7-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
rootfs on / type rootfs (rw)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
/dev/scd1 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sdc3 on /media/Backup HD type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdc1 on /media/disk type ext3 (rw,nosuid,nodev,uhelper=hal)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect
C:\bootsect.lnx="Ubuntu 8.10"
=========================== sdc1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=b2d1d860-943b-4ba0-8ac8-a0971e54bca1 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=b2d1d860-943b-4ba0-8ac8-a0971e54bca1
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.10, kernel 2.6.27-7-generic
uuid b2d1d860-943b-4ba0-8ac8-a0971e54bca1
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=b2d1d860-943b-4ba0-8ac8-a0971e54bca1 ro quiet
initrd /boot/initrd.img-2.6.27-7-generic
quiet
title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid b2d1d860-943b-4ba0-8ac8-a0971e54bca1
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=b2d1d860-943b-4ba0-8ac8-a0971e54bca1 ro single
initrd /boot/initrd.img-2.6.27-7-generic
title Ubuntu 8.10, memtest86+
uuid b2d1d860-943b-4ba0-8ac8-a0971e54bca1
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Home Edition
root (hd0,0)
savedefault
chainloader +1
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows NT/2000/XP
root (hd0,1)
savedefault
chainloader +1
=============================== sdc1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sdc1
UUID=b2d1d860-943b-4ba0-8ac8-a0971e54bca1 / ext3 relatime,errors=remount-ro 0 1
# /dev/sdc2
UUID=20feffd9-1f3b-4f29-b72d-6bb3763fd20e none swap sw 0 0
/dev/scd1 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sdc1: Location of files loaded by Grub: ===================
23.2GB: boot/grub/menu.lst
23.2GB: boot/grub/stage2
23.2GB: boot/initrd.img-2.6.27-7-generic
23.2GB: boot/vmlinuz-2.6.27-7-generic
23.2GB: initrd.img
23.2GB: vmlinuz
=======Devices which don't seem to have a corresponding hard drive==============
sdd sde sdf sdg
=============================== StdErr Messages: ===============================
hexdump: /media/Backup: No such file or directory
hexdump: HD/bootsect.lnx: No such file or directory
./boot_info_script032.sh: line 590: [: -lt: unary operator expected
./boot_info_script032.sh: line 590: [: -lt: unary operator expected
./boot_info_script032.sh: line 590: [: -lt: unary operator expected