early installation issue

[KILLER RABBIT]

trying to instal 9.04 i burned the iso to a disk, when i boot from the cd and click instal ubuntu after having just sitting for a while got stuck loading at a line that said * enabling bluetooth [ok]

i do not have blue tooth if that matters.

on another try of just running it off the disk it got to a with the mouse working. the box had unknown characters. showing just little squares, with one unknown clickable button. i clicked it and then itjust seemed to suspend the installation after refreshing the monitor a few times.

[overdrank]

trying to instal 9.04 i burned the iso to a disk, when i boot from the cd and click instal ubuntu after having just sitting for a while got stuck loading at a line that said * enabling bluetooth [ok]

i do not have blue tooth if that matters.

on another try of just running it off the disk it got to a with the mouse working. the box had unknown characters. showing just little squares, with one unknown clickable button. i clicked it and then itjust seemed to suspend the installation after refreshing the monitor a few times.

Hi and welcome, could you give us some specs on the system?
Have you checked the cd for errors?
You may have a look here (https://help.ubuntu.com/community/BurningIsoHowto) at burning the cd and HowToMD5SUM.

Moved to Absolute Beginner Talk

[Panagiotis]

:lolflag:
Hi and welcome, could you give us some specs on the system?
Have you checked the cd for errors?
You may have a look here (https://help.ubuntu.com/community/BurningIsoHowto) at burning the cd and HowToMD5SUM.

Moved to Absolute Beginner Talk I am in the process of burning the two new downloads to CDROM with 9.04 desktop server for 32-bit & 64-bit versions of ubuntu, I have Nero 9 installed on my XP home laptop, and want to know how to MD5SUM prior of burning the 1,4G double package download.

here are my spec. for the new ubuntu server double install deployment package:

I plan use two PCs test system setup: 1st a Tyan S475 Trinity (Lic. Award 2005 upd bios) Worstation Intel4\HT 875P MCH board, 1GB ECC kit DDR, 2LAN controlers, Via Fireware 2xport, IDE\SATA Intel ICH5 & one extra Promise Raid IDE\SATA, ATI-AGP\S3-PCI\NVidia-AGP/PCI?? VGA

2nd a new Asus AM2+ AMD Quad Phenom board (AMI 2008 bios) with onboard VGA from ATI HD3300 that supports HDMI projector, 2GB kit DDR2, Marvell GigLan, LSI Fireware 2xport, SATAII & eSATAII, as a backup card a NVidia 9600 VGA for use in case of trouble with onboard ATI chip

thanks,:confused:

[KILLER RABBIT]

checked the cd. came back fine. also did the memory check. came back ok. dell dimension 2200

[Didius Falco]

This may be worth a try - can't hurt, I'd say...

http://ubuntuforums.org/showpost.php?p=7220298&postcount=2

Regards,

Didius

[Panagiotis]

checked the cd. came back fine. also did the memory check. came back ok. dell dimension 2200
:confused: Nero 9 data verification fails after successfully finish the Ubuntu 9.04 ISO image (too many errors) burning, the Ubuntu install boot up screen shows OK but there is no way to tell if the files burned are correct ...

6.5.2009
CD Image
22:08:15 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

22:08:15 #2 Text 0 File Burncd.cpp, Line 3233
_NEC DVD+-RW ND-6500A
JustLink activated

22:08:16 #3 Text 0 File Burncd.cpp, Line 3563
Turn on UltraRaw 96-Mode, using CD-R/RW media

22:08:17 #4 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 366223 ( 81:24.73)
Last address to be written: 357865 ( 79:33.40)

22:08:17 #5 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)

22:08:17 #6 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: _NEC DVD+-RW ND-6500A;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

22:08:17 #7 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:08:17 #8 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 357866 (357866) = #357866/79:31.41
not relocatable, disc pos for caching/writing not required/not required
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 357866 blocks [D: _NEC DVD+-RW ND-6500A]
--------------------------------------------------------------

22:08:17 #9 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [D: _NEC DVD+-RW ND-6500A] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 876423168, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 357866 | 357866 | 0x00
357866 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

22:08:17 #10 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

22:08:17 #11 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-No, small files-No (<64KB)

22:08:17 #12 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 8x (1.200 KB/s)

22:08:17 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

22:08:17 #14 Text 0 File MMC.cpp, Line 17849
StartDAO : CD-Text - Off

22:08:17 #15 Text 0 File MMC.cpp, Line 22511
Set BUFE: JustLink -> ON

22:08:18 #16 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

22:18:42 #17 Text 0 File WriterStatus.cpp, Line 245
<D: _NEC DVD+-RW ND-6500A> start writing Lead-Out at LBA 357866 (575EAh), length 375 blocks

22:18:44 #18 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0

22:18:44 #19 Phase 37 File dlgbrnst.cpp, Line 1767
Burn process completed successfully at 8x (1.200 KB/s)

22:18:45 #20 Phase 78 File dlgbrnst.cpp, Line 1767
Data verification started

22:18:47 #21 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 357866 -> 357864.

22:18:47 #22 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 590400

22:18:47 #23 SPTI -1047 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
CDB Data: 0x28 00 00 00 00 00 00 00 01 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 64
Buffer x063b9f40: Len x800

........

22:18:47 #265 SPTI -1047 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
CDB Data: 0x28 00 00 00 00 F2 00 00 01 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 64
Buffer x06440040: Len x800

22:18:48 #266 SectorVerify 20 File Cdrdrv.cpp, Line 11386
Read errors from sector 0 to 1055

22:18:48 #267 CDR -1222 File Writer.cpp, Line 203
Verification aborted, too much errors
D: _NEC DVD+-RW ND-6500A

22:18:48 #268 Phase 81 File dlgbrnst.cpp, Line 1767
Data verification failed

22:18:48 #269 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

22:18:48 #270 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed

22:18:48 #271 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)


also there is n o way to exit the boot up welcome to Ubuntu screen but to restat the system and removing the boot cd so that windows boot will continue.

How do I do a MD5 sum check :confused:?? by the way the same problem I have with the MAC OS Leopard update 5.0.6

thanks,

[carml]

First of all I suggest you to retry to write the ISO file to a lower burn velocity.To check the md5 this SW should do the job: md5sum.exe.
Let us know if you have got any more problems. :)