View Full Version : [ubuntu] Does Jaunty support wlan ralink rt2870?
AlanRick
April 23rd, 2009, 09:17 PM
Hi,
It took a fair amount of work to get my logilink wlan usb-stick working on 8.10.
Does 9.04 include a driver for ralink rt2870 or would I have to go through that all again?
Plea: Hope it does - wlan is one of the most important aspects of ubuntu for many. Once you get that working you can install updates for everything else easily.
velislavv
April 23rd, 2009, 09:22 PM
Hi,
It took a fair amount of work to get my logilink wlan usb-stick working on 8.10.
Does 9.04 include a driver for ralink rt2870 or would I have to go through that all again?
Plea: Hope it does - wlan is one of the most important aspects of ubuntu for many. Once you get that working you can install updates for everything else easily.
I think Ubuntu 9.04 includes drivers for rt2870, but if it dosent, see this it can help you http://ubuntuforums.org/showthread.php?t=766850
jimbob
April 23rd, 2009, 10:08 PM
Take a look at /lib/modules/2.6.28-11-generic/kernel/drivers/staging/rt2870/rt2870sta.ko
If you have it, that is the driver you need.
AlanRick
May 17th, 2009, 10:23 PM
I did a fresh jaunty install and it did support the ralink rt2870 after all. However there seems to be a bug (reported in another thread) that the 802.11n is not suppported since only 54MB/s is reached. (tracked as Bug #377745)
jimbob
May 17th, 2009, 10:32 PM
I don't know if that could be classified as a bug since as far as I know the 802.11n standard is not yet finalized.
What is the link to the thread you found?
AlanRick
May 18th, 2009, 08:06 AM
I don't know if that could be classified as a bug since as far as I know the 802.11n standard is not yet finalized.
It's still draft but since the ralinktech driver does support more than 54Mb/s then the jaunty kernel version should too.
I thought the minor problem worth logging but if you think it's not useful I'll close the bug.
I'm having the same issue with a ralink 2870 and a fresh Jaunty install.
It finds the card and works without any additional driver compiling/installing however it maxes out at 54Mb/s. I achieved much higher with the same card and Intrepid (though I had to compile and install a driver as above)
-- EDIT -- I followed someone else's instructions to download the new ralink driver from their website: http://www.ralinktech.com.tw/data/drivers/2009_0424_RT2870_Linux_STA_V2.1.1.0.tgz
Extract to a folder, enter the folder and 'sudo make', 'sudo make install', reboot and voila. It's connecting to 5Ghz networks at 300Mb/s.
The main thing is the chip is recognized in jaunty which is a huge step forward :-({|=
chitowner2
September 4th, 2009, 05:20 PM
I don't know if that could be classified as a bug since as far as I know the 802.11n standard is not yet finalized.
What is the link to the thread you found?
JIMBOB-
Any ideas how to get WIDC to apply the rt2870 driver and get it to recognize a USB device so that WLAN can be established?
Thanks!
jimbob
September 4th, 2009, 06:54 PM
Any ideas how to get WIDC to apply the rt2870 driver and get it to recognize a USB device so that WLAN can be established?
Do you mean WICD? I don't know anyone who has done that. If you have the driver built and installed and it works with Network Manager then it would be easy to install Wicd (which if I recall automatically removes NM during the installation) and give it a try. You can always go back the other way.
AlanRick
September 11th, 2009, 11:30 PM
I don't know if that could be classified as a bug since as far as I know the 802.11n standard is not yet finalized.
Rumor has it that 802.11n has now been finalized (http://s2n.merunetworks.com/2009/09/802-11n-approved-official-notification/) :D
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.