PDA

View Full Version : [ubuntu] Installation



zloyzenka
February 28th, 2009, 03:19 AM
Trying to install Ubuntu 8.10 on acer 5920 laptop.
successfully finishing first 6 steps, i the middle of seventh screen becomes black, does some check up but after 'Battery check OK' it just stops.

sukhhari
February 28th, 2009, 07:00 AM
Your Installation CD / DVD Problem, download fresh Ubuntu and try to burn cd / dvd and check the cd /dvd then install.

tommcd
February 28th, 2009, 09:31 AM
Trying to install Ubuntu 8.10 on acer 5920 laptop.
successfully finishing first 6 steps, i the middle of seventh screen becomes black, does some check up but after 'Battery check OK' it just stops.

There have been some recent threads on this. See post #16 from this thread:
http://ubuntuforums.org/showthread.php?t=998991
The bottom line is to boot the Ubuntu install CD, then hit F6 to load extra boot options, and type: acpi_osi="Linux" including the quotes, and hit enter to start the install. This may not work, but it is worth a try.
Also this thread:
http://ubuntuforums.org/showthread.php?t=1077048
If acpi_osi="Linux" doesn't help, boot the Ubuntu CD again, hit F6, and type:

"acpi=force pci=noacpi"
Include the quotes. If that doesn't work, the boot the CD and hit F6 and try:

"acpi=off"
This may be a bug in the Ubuntu installer, or a problem with a proprietary (secret) acpi implementation from Acer. Hope some of this helps.

You might try burning a new CD also. Be sure to burn at the slowest possible speed, and check the CD for defects by choosing that option from the menu when Ubuntu boots up. The wiki says Ubuntu does work on the Acer 5920 as far back as Fiesty:
https://wiki.ubuntu.com/LaptopTestingTeam/AcerAspire5920
Try burning the CD with Iso Recorder or Infra Recorder:
https://help.ubuntu.com/community/BurningIsoHowto

And welcome to the Ubuntu forums!

zloyzenka
March 1st, 2009, 08:53 PM
Thanks for help
acpi_osi="Linux" was a solution, except it didn't let me partition my disk. Now I'm proud user of Ubuntu System.

tommcd
March 1st, 2009, 11:02 PM
Thanks for help
acpi_osi="Linux" was a solution, except it didn't let me partition my disk. Now I'm proud user of Ubuntu System.

If you got Ubuntu installed you must have at least one partition, which will be root. More likely, you will have 2: root and swap. Swap is like virtual memory in Windows.
To list your partitions run this from the terminal

sudo fdisk -l

The ideal situation is to have 3 partitions: root, swap, and home. Home is for all your data, so if you ever reinstall Ubuntu all your data is safe on a separate partition. The next time you need to partition your hard drive, consider trying the Parted Magic live CD:
http://partedmagic.com/
The GParted live CD is also very good:
http://gparted.sourceforge.net/livecd.php

Glad you got Ubuntu installed.