flim
February 21st, 2009, 06:28 PM
Hi there,
I've had my machine upgraded - now has 4x1TB drives on raid 0 and no hd connected to internal controller.
Ubuntu boots fine from cd, and install works without problem. However, on boot, Grub stops with Error 17.
It's a new install, there's no other OS present (and won't). Ubuntu has been installed to sda, with sda1=swap, sda2=ext3 /. Grub is written to sda and configured to boot from sda2 (although that is via UUID) - doesn't look as if grub could find that info though, seems to stop before reading it (menu doesn't come up).
I've of course done some research before posting, but couldn't find anything useful yet. There's nothing in bios or raid setup (hardware raid, controller is DC-3410) I could change (bios only allows to change internal controller anyway, and only the CD drive is connected to that one).
Disks are working fine once Ubuntu has been booted from CD.
Any ideas anyone? I've got no clue where to look for more infos right now :|
I've had my machine upgraded - now has 4x1TB drives on raid 0 and no hd connected to internal controller.
Ubuntu boots fine from cd, and install works without problem. However, on boot, Grub stops with Error 17.
It's a new install, there's no other OS present (and won't). Ubuntu has been installed to sda, with sda1=swap, sda2=ext3 /. Grub is written to sda and configured to boot from sda2 (although that is via UUID) - doesn't look as if grub could find that info though, seems to stop before reading it (menu doesn't come up).
I've of course done some research before posting, but couldn't find anything useful yet. There's nothing in bios or raid setup (hardware raid, controller is DC-3410) I could change (bios only allows to change internal controller anyway, and only the CD drive is connected to that one).
Disks are working fine once Ubuntu has been booted from CD.
Any ideas anyone? I've got no clue where to look for more infos right now :|