em4r1z
January 28th, 2009, 11:01 PM
A couple of hours ago I updated my system, it was up to date thus the updates available were a new kernel (linux-generic, linux-headers, etc.) and gnome-power-manager. After the update, I rebooted the system and lost access to the X server. I tried the former kernel (I only kept one) in both normal and recovery modes with no luck. As the system was mounted as read-only no matter what kernel or mode I tried, I couldn't run apt-get/aptitude to reinstall the NVIDIA drivers (where I think the problem lies.)
I used a live CD to visit this forum and check for possible workarounds and after a couple of restarts the system freezes during the booting stating there's a kernel panic due to 'not syncing - attempted to kill init!'.
Mine is an AMD64 Sempron Mobile 3500+ system with an NVIDIA GeForce Go 6100 video card using Ubuntu 8.10 64bit with the latest NVIDIA drivers provided by Ubuntu.
I already backed up the folders I needed. Any ideas on how to recover my system?
em4r1z
January 28th, 2009, 11:14 PM
No matter what kernel or mode I try, there's a kernel panic. If I load any kernel in normal mode, the system freezes a few seconds after the booting process and the laptop leds light up. If I load any kernel in recovery mode, the 'kernel panic - not syncing - attempted to kill init' notification appears and the system freezes.
I searched the kernel panic message and it seems to be RAM-related, however I can run live CD's with no problem and the system sees the 2 Gb of RAM (running Conky and using the 'free' command.)
I tried the 'xfix' option before (when the problem was limited to not loading the X server) with both kernels with no luck.
dpolishannu
January 29th, 2009, 10:12 AM
Does kernel panic mean, that I et only white screen when I should et login screen...
I have 8.10 64bit ubuntu installed.
Amd Athlon 64 X2 dual core 4800+
motherboard is asus m2a-vm, this have that annoying aperture size error on bootup, can not handle but 3.3Gb of memory.
Just updated upgrades (very latest, cause i update every/every other day) and booted the computer, and when should get login screen, I get white screen. I have ATI/AMD proprietary FGLRX graphics driver installed.
I can start my ubuntu with previous kernel. The list when I start my ubuntu... just select kernel 2.6.27-9-generic, the newest is 2.6.27-11-generic.
I am more than happy to post any logs, if I only know what and where and how.
Integrated graphics is ati radeon x1250, I use dvi output.
em4r1z
January 30th, 2009, 05:41 AM
I had to reinstall to get a working system. I'm currently using the 2.26.27-11 kernel on an AMD64 system with an NVIDIA chipset, and I've found these problems:
- While I can access the Internet, the Network Manager cannot administer the ethernet adapter.
- I cannot start the X server if I use the NVIDIA drivers (180.)
Since the ethernet adapter is controlled by the NVIDIA chipset, I guess both problems are related. Any leads on how to solve them?
Can I install an older kernel (27-9) and remove the latest one?
em4r1z
February 1st, 2009, 12:51 AM
Pumalite, I attached the output of 'dmesg'. There are plenty of errors I didn't know my system had.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd@crested) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:28:32 UTC 2009 (Ubuntu 2.6.27-11.27-generic)
[ 0.000000] Command line: root=UUID=2ea0756f-8a46-4b20-8a3d-de4594addea4 ro quiet splash elevator=deadline
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000006ffd0000 - 000000006ffde000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006ffde000 - 0000000070000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x6ffd0 max_arch_pfn = 0x3ffffffff
[ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up.
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 006fe00000 page 2M
[ 0.000000] 006fe00000 - 006ffd0000 page 4k
[ 0.000000] kernel direct mapping tables up to 6ffd0000 @ 10000-14000
[ 0.000000] last_map_addr: 6ffd0000 end: 6ffd0000
[ 0.000000] RAMDISK: 377e7000 - 37fef5e7
[ 0.000000] ACPI: RSDP 000F8C00, 0014 (r0 M S I )
[ 0.000000] ACPI: RSDT 6FFD0000, 0044 (r1 MSI_NB MEGABOOK 10312007 MSFT 97)
[ 0.000000] ACPI: FACP 6FFD0200, 0084 (r2 M S I 1632 10312007 MSFT 97)
[ 0.000000] ACPI: DSDT 6FFD05C0, 4A4D (r1 M S I 1632 7 INTL 20051117)
[ 0.000000] ACPI: FACS 6FFDE000, 0040
[ 0.000000] ACPI: APIC 6FFD0390, 0070 (r1 M S I OEMAPIC 10312007 MSFT 97)
[ 0.000000] ACPI: MCFG 6FFD0400, 003C (r1 M S I OEMMCFG 10312007 MSFT 97)
[ 0.000000] ACPI: SLIC 6FFD0440, 0176 (r1 MSI_NB MEGABOOK 10312007 MSFT 97)
[ 0.000000] ACPI: SLIC 6FFD0440, 0176 (r1 MSI_NB MEGABOOK 10312007 MSFT 97)
[ 0.000000] ACPI: OEMB 6FFDE040, 0071 (r1 M S I AMI_OEM 10312007 MSFT 97)
[ 0.000000] ACPI: HPET 6FFD5010, 0038 (r1 M S I OEMHPET0 10312007 MSFT 97)
[ 0.000000] ACPI: SSDT 6FFD5050, 0129 (r1 A M I POWERNOW 1 AMD 1)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000006ffd0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000006ffd0000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 0000000000024fff] pages e
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 006ffd0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00008b9f5c] TEXT DATA BSS ==> [0000200000 - 00008b9f5c]
[ 0.000000] #3 [00377e7000 - 0037fef5e7] RAMDISK ==> [00377e7000 - 0037fef5e7]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0006ffd0
[ 0.000000] On node 0 totalpages: 458591
[ 0.000000] DMA zone: 2095 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 447504 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 70000000:8ec00000)
[ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 449599
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=2ea0756f-8a46-4b20-8a3d-de4594addea4 ro quiet splash elevator=deadline
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 1808.186 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 1480000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] Memory: 1790284k/1834816k available (3116k kernel code, 44080k reserved, 1575k data, 540k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3616.37 BogoMIPS (lpj=7232744)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 0/0 -> Node 0
[ 0.004000] tseg: 0000000000
[ 0.004000] using C1E aware idle routine
[ 0.004000] SMP alternatives: switching to UP code
[ 0.008011] ACPI: Core revision 20080609
[ 0.009587] ACPI: Checking initramfs for custom DSDT
[ 0.372179] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.411878] CPU0: Mobile AMD Sempron(tm) Processor 3500+ stepping 02
[ 0.411883] Using local APIC timer interrupts.
[ 0.412027] APIC timer calibration result 12556877
[ 0.412029] Detected 12.556 MHz APIC timer.
[ 0.412106] Brought up 1 CPUs
[ 0.412108] Total of 1 processors activated (3616.37 BogoMIPS).
[ 0.412198] CPU0 attaching NULL sched-domain.
[ 0.412493] net_namespace: 1552 bytes
[ 0.412498] Booting paravirtualized kernel on bare hardware
[ 0.412679] Time: 21:22:23 Date: 01/31/09
[ 0.412715] NET: Registered protocol family 16
[ 0.413037] node 0 link 0: io port [1000, ffffff]
[ 0.413041] TOM: 0000000080000000 aka 2048M
[ 0.413044] node 0 link 0: mmio [e0000000, efffffff]
[ 0.413047] node 0 link 0: mmio [a0000, bffff]
[ 0.413050] node 0 link 0: mmio [80000000, fe0bffff]
[ 0.413053] bus: [00,ff] on node 0 link 0
[ 0.413056] bus: 00 index 0 io port: [0, ffff]
[ 0.413058] bus: 00 index 1 mmio: [80000000, fcffffffff]
[ 0.413060] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.413070] ACPI: bus type pci registered
[ 0.413180] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.413183] PCI: Not using MMCONFIG.
[ 0.413185] PCI: Using configuration type 1 for base access
[ 0.414932] ACPI: EC: Look up EC in DSDT
[ 0.423295] ACPI: Interpreter enabled
[ 0.423299] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.423318] ACPI: Using IOAPIC for interrupt routing
[ 0.423393] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.427914] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.442719] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.453638] ACPI: EC: GPE = 0x5c, I/O: command/status = 0x66, data = 0x62
[ 0.453641] ACPI: EC: driver started in poll mode
[ 0.453794] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.454060] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.454063] pci 0000:00:03.0: PME# disabled
[ 0.454077] PCI: 0000:00:05.0 reg 10 32bit mmio: [fb000000, fbffffff]
[ 0.454083] PCI: 0000:00:05.0 reg 14 64bit mmio: [d0000000, dfffffff]
[ 0.454088] PCI: 0000:00:05.0 reg 1c 64bit mmio: [fa000000, faffffff]
[ 0.454093] PCI: 0000:00:05.0 reg 30 32bit mmio: [f9fe0000, f9ffffff]
[ 0.454299] PCI: 0000:00:0a.1 reg 20 io port: [5000, 503f]
[ 0.454304] PCI: 0000:00:0a.1 reg 24 io port: [6000, 603f]
[ 0.454323] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.454328] pci 0000:00:0a.1: PME# disabled
[ 0.454356] PCI: 0000:00:0a.3 reg 10 32bit mmio: [f9f80000, f9fbffff]
[ 0.454440] PCI: 0000:00:0b.0 reg 10 32bit mmio: [f9fde000, f9fdefff]
[ 0.454465] pci 0000:00:0b.0: supports D1
[ 0.454467] pci 0000:00:0b.0: supports D2
[ 0.454469] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.454472] pci 0000:00:0b.0: PME# disabled
[ 0.454494] PCI: 0000:00:0b.1 reg 10 32bit mmio: [f9fdfc00, f9fdfcff]
[ 0.454520] pci 0000:00:0b.1: supports D1
[ 0.454522] pci 0000:00:0b.1: supports D2
[ 0.454524] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.454527] pci 0000:00:0b.1: PME# disabled
[ 0.454559] PCI: 0000:00:0d.0 reg 20 io port: [ffa0, ffaf]
[ 0.454595] PCI: 0000:00:0e.0 reg 10 io port: [e800, e807]
[ 0.454600] PCI: 0000:00:0e.0 reg 14 io port: [e480, e483]
[ 0.454604] PCI: 0000:00:0e.0 reg 18 io port: [e400, e407]
[ 0.454609] PCI: 0000:00:0e.0 reg 1c io port: [e080, e083]
[ 0.454613] PCI: 0000:00:0e.0 reg 20 io port: [e000, e00f]
[ 0.454618] PCI: 0000:00:0e.0 reg 24 32bit mmio: [f9fdd000, f9fddfff]
[ 0.454654] PCI: 0000:00:0f.0 reg 10 io port: [dc00, dc07]
[ 0.454659] PCI: 0000:00:0f.0 reg 14 io port: [d880, d883]
[ 0.454663] PCI: 0000:00:0f.0 reg 18 io port: [d800, d807]
[ 0.454668] PCI: 0000:00:0f.0 reg 1c io port: [d480, d483]
[ 0.454672] PCI: 0000:00:0f.0 reg 20 io port: [d400, d40f]
[ 0.454677] PCI: 0000:00:0f.0 reg 24 32bit mmio: [f9fdc000, f9fdcfff]
[ 0.454743] PCI: 0000:00:10.1 reg 10 32bit mmio: [f9fd8000, f9fdbfff]
[ 0.454771] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.454775] pci 0000:00:10.1: PME# disabled
[ 0.454800] PCI: 0000:00:14.0 reg 10 32bit mmio: [f9fd7000, f9fd7fff]
[ 0.454805] PCI: 0000:00:14.0 reg 14 io port: [d080, d087]
[ 0.454826] pci 0000:00:14.0: supports D1
[ 0.454827] pci 0000:00:14.0: supports D2
[ 0.454829] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.454833] pci 0000:00:14.0: PME# disabled
[ 0.454931] PCI: bridge 0000:00:03.0 io port: [b000, bfff]
[ 0.454934] PCI: bridge 0000:00:03.0 32bit mmio: [fc000000, feafffff]
[ 0.454965] PCI: 0000:04:04.0 reg 10 32bit mmio: [febfd000, febfdfff]
[ 0.454971] PCI: 0000:04:04.0 reg 14 32bit mmio: [febfe000, febfe7ff]
[ 0.454999] pci 0000:04:04.0: supports D1
[ 0.455000] pci 0000:04:04.0: supports D2
[ 0.455002] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.455006] pci 0000:04:04.0: PME# disabled
[ 0.455031] PCI: 0000:04:04.2 reg 10 32bit mmio: [febfec00, febfecff]
[ 0.455066] pci 0000:04:04.2: supports D1
[ 0.455067] pci 0000:04:04.2: supports D2
[ 0.455069] pci 0000:04:04.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.455073] pci 0000:04:04.2: PME# disabled
[ 0.455097] PCI: 0000:04:04.3 reg 10 32bit mmio: [febff000, febfffff]
[ 0.455132] pci 0000:04:04.3: supports D1
[ 0.455134] pci 0000:04:04.3: supports D2
[ 0.455136] pci 0000:04:04.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.455140] pci 0000:04:04.3: PME# disabled
[ 0.455170] PCI: 0000:04:09.0 reg 10 32bit mmio: [febf0000, febf7fff]
[ 0.455224] pci 0000:00:10.0: transparent bridge
[ 0.455229] PCI: bridge 0000:00:10.0 32bit mmio: [feb00000, febfffff]
[ 0.455243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.455690] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.455934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.471416] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 0.471725] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.472039] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
[ 0.472344] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.472649] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.472954] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.473260] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
[ 0.473565] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.473871] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
[ 0.474176] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *14
[ 0.474482] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[ 0.474786] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
[ 0.475090] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.475396] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.475705] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
[ 0.476019] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[ 0.476357] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 0.476667] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[ 0.477034] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.477307] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.477344] pnp: PnP ACPI init
[ 0.477353] ACPI: bus type pnp registered
[ 0.482133] pnp: PnP ACPI: found 13 devices
[ 0.482136] ACPI: ACPI bus type pnp unregistered
[ 0.482517] PCI: Using ACPI for IRQ routing
[ 0.492086] NET: Registered protocol family 8
[ 0.492088] NET: Registered protocol family 20
[ 0.492125] NetLabel: Initializing
[ 0.492127] NetLabel: domain hash size = 128
[ 0.492129] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.492144] NetLabel: unlabeled traffic allowed by default
[ 0.492336] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.492341] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.494710] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.494712] actual entries 65586
[ 0.494854] AppArmor: AppArmor Filesystem Enabled
[ 0.494883] ACPI: RTC can wake from S4
[ 0.496048] Switched to high resolution mode on CPU 0
[ 0.504041] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.504050] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.504053] system 00:08: ioport range 0x800-0x80f has been reserved
[ 0.504056] system 00:08: ioport range 0x4000-0x407f has been reserved
[ 0.504063] system 00:08: ioport range 0x4080-0x40ff has been reserved
[ 0.504066] system 00:08: ioport range 0x4400-0x447f has been reserved
[ 0.504069] system 00:08: ioport range 0x4480-0x44ff has been reserved
[ 0.504072] system 00:08: ioport range 0x4800-0x487f has been reserved
[ 0.504075] system 00:08: ioport range 0x4880-0x48ff has been reserved
[ 0.504077] system 00:08: ioport range 0x2000-0x207f has been reserved
[ 0.504080] system 00:08: ioport range 0x2080-0x20ff has been reserved
[ 0.504084] system 00:08: iomem range 0xfee01000-0xfeefffff could not be reserved
[ 0.504092] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.504095] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.504104] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.504111] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.504114] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[ 0.504117] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.504120] system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.504123] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.509233] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[ 0.509236] pci 0000:00:03.0: IO window: 0xb000-0xbfff
[ 0.509240] pci 0000:00:03.0: MEM window: 0xfc000000-0xfeafffff
[ 0.509243] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.509247] pci 0000:00:10.0: PCI bridge, secondary bus 0000:04
[ 0.509249] pci 0000:00:10.0: IO window: disabled
[ 0.509252] pci 0000:00:10.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.509255] pci 0000:00:10.0: PREFETCH window: disabled
[ 0.509265] pci 0000:00:03.0: enabling device (0000 -> 0003)
[ 0.509270] pci 0000:00:03.0: setting latency timer to 64
[ 0.509275] pci 0000:00:10.0: setting latency timer to 64
[ 0.509278] bus: 00 index 0 io port: [0, ffff]
[ 0.509280] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.509283] bus: 01 index 0 io port: [b000, bfff]
[ 0.509285] bus: 01 index 1 mmio: [fc000000, feafffff]
[ 0.509287] bus: 01 index 2 mmio: [0, 0]
[ 0.509289] bus: 01 index 3 mmio: [0, 0]
[ 0.509291] bus: 04 index 0 mmio: [0, 0]
[ 0.509292] bus: 04 index 1 mmio: [feb00000, febfffff]
[ 0.509294] bus: 04 index 2 mmio: [0, 0]
[ 0.509296] bus: 04 index 3 io port: [0, ffff]
[ 0.509298] bus: 04 index 4 mmio: [0, ffffffffffffffff]
[ 0.509313] NET: Registered protocol family 2
[ 0.548124] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.549006] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.551024] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.551544] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.551547] TCP reno registered
[ 0.560106] NET: Registered protocol family 1
[ 0.560240] checking if image is initramfs... it is
[ 1.418051] Freeing initrd memory: 8225k freed
[ 1.423465] audit: initializing netlink socket (disabled)
[ 1.423481] type=2000 audit(1233436943.420:1): initialized
[ 1.429940] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.432540] VFS: Disk quotas dquot_6.5.1
[ 1.432639] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.432754] msgmni has been set to 3512
[ 1.432899] io scheduler noop registered
[ 1.432901] io scheduler anticipatory registered
[ 1.432904] io scheduler deadline registered (default)
[ 1.433031] io scheduler cfq registered
[ 1.433047] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.433085] pci 0000:00:03.0: Enabling HT MSI Mapping
[ 1.433094] pci 0000:00:05.0: Boot video device
[ 1.433115] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.433184] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.433196] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 1.433206] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 1.433218] pci 0000:00:10.1: Enabling HT MSI Mapping
[ 1.433349] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 1.433372] pcieport-driver 0000:00:03.0: found MSI capability
[ 1.433395] pci_express 0000:00:03.0:pcie00: allocate port service
[ 1.433442] pci_express 0000:00:03.0:pcie03: allocate port service
[ 1.472340] hpet_resources: 0xfed00000 is busy
[ 1.472419] Linux agpgart interface v0.103
[ 1.472424] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.474740] brd: module loaded
[ 1.474821] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.474952] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.475307] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.475393] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.475398] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.475401] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.475403] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.475406] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.484293] mice: PS/2 mouse device common for all mice
[ 1.484432] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.484469] rtc0: alarms up to one year, y3k, hpet irqs
[ 1.484511] cpuidle: using governor ladder
[ 1.484513] cpuidle: using governor menu
[ 1.484972] TCP cubic registered
[ 1.485211] registered taskstats version 1
[ 1.485383] Magic number: 9:350:400
[ 1.485538] rtc_cmos 00:02: setting system clock to 2009-01-31 21:22:24 UTC (1233436944)
[ 1.485541] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.485543] EDD information not available.
[ 1.485589] Freeing unused kernel memory: 540k freed
[ 1.485871] Write protecting the kernel read-only data: 4352k
[ 1.490202] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.600823] fuse init (API version 7.9)
[ 1.621371] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.621436] processor ACPI0007:00: registered as cooling_device0
[ 1.623877] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.624132] ACPI: Thermal Zone [THRM] (75 C)
[ 2.276893] usbcore: registered new interface driver usbfs
[ 2.276920] usbcore: registered new interface driver hub
[ 2.284076] usbcore: registered new device driver usb
[ 2.286110] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.286633] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 2.286645] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 2.286658] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 2.286662] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 2.286713] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 2.286748] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xf9fde000
[ 2.296179] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.306974] No dock devices found.
[ 2.342180] usb usb1: configuration #1 chosen from 1 choice
[ 2.342210] hub 1-0:1.0: USB hub found
[ 2.342221] hub 1-0:1.0: 8 ports detected
[ 2.352488] SCSI subsystem initialized
[ 2.420062] libata version 3.00 loaded.
[ 2.444955] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 2.444968] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 2.444982] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 2.444986] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 2.445014] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 2.445048] ehci_hcd 0000:00:0b.1: debug port 1
[ 2.445052] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 2.445079] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xf9fdfc00
[ 2.456101] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.456261] usb usb2: configuration #1 chosen from 1 choice
[ 2.456291] hub 2-0:1.0: USB hub found
[ 2.456300] hub 2-0:1.0: 8 ports detected
[ 2.560369] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 2.560876] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 2.560889] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 2.560895] forcedeth 0000:00:14.0: setting latency timer to 64
[ 2.560928] nv_probe: set workaround bit for reversed mac addr
[ 3.080781] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:db:3e:26:97
[ 3.080786] forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3
[ 3.081770] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 3.081783] ohci1394 0000:04:04.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 3.131560] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[febfd000-febfd7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 3.137410] pata_acpi 0000:00:0d.0: setting latency timer to 64
[ 3.137929] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 3.137941] pata_acpi 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 3.137959] pata_acpi 0000:00:0e.0: setting latency timer to 64
[ 3.137968] pata_acpi 0000:00:0e.0: PCI INT A disabled
[ 3.138407] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 3.138411] pata_acpi 0000:00:0f.0: PCI INT A -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 3.138428] pata_acpi 0000:00:0f.0: setting latency timer to 64
[ 3.138437] pata_acpi 0000:00:0f.0: PCI INT A disabled
[ 3.143224] sata_nv 0000:00:0e.0: version 3.5
[ 3.143239] sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 3.143242] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 3.143291] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 3.146202] scsi0 : sata_nv
[ 3.149925] scsi1 : sata_nv
[ 3.150180] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 20
[ 3.150184] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 20
[ 3.616086] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.671162] ata1.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133
[ 3.671165] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.684442] ata1.00: configured for UDMA/133
[ 3.996089] isa bounce pool size: 16 pages
[ 3.996158] scsi 0:0:0:0: Direct-Access ATA WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5
[ 3.997784] sata_nv 0000:00:0f.0: PCI INT A -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 3.997788] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 3.997834] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 3.997959] scsi2 : sata_nv
[ 3.999037] scsi3 : sata_nv
[ 3.999258] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 23
[ 3.999262] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 23
[ 4.405329] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc1000a3c41d01]
[ 4.620663] pata_amd 0000:00:0d.0: version 0.3.10
[ 4.620715] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 4.627489] scsi4 : pata_amd
[ 4.630883] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.635298] scsi5 : pata_amd
[ 4.637866] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 4.637869] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 4.637902] ata5: port disabled. ignoring.
[ 4.658982] Driver 'sd' needs updating - please use bus_type methods
[ 4.659090] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 4.659107] sd 0:0:0:0: [sda] Write Protect is off
[ 4.659110] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.659136] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.659208] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 4.659223] sd 0:0:0:0: [sda] Write Protect is off
[ 4.659225] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.659251] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.659256] sda: sda1 sda2 sda3
[ 4.710450] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.800351] ata6.00: ATAPI: Optiarc DVD RW AD-7530B, NX02, max UDMA/33
[ 4.800368] ata6: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:900:0x11)
[ 4.816317] ata6.00: configured for UDMA/33
[ 4.817593] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX02 PQ: 0 ANSI: 5
[ 4.817771] scsi 5:0:0:0: Attached scsi generic sg1 type 5
[ 4.862627] Driver 'sr' needs updating - please use bus_type methods
[ 4.873471] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.873477] Uniform CD-ROM driver Revision: 3.20
[ 4.873582] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 5.366523] PM: Starting manual resume from disk
[ 5.366527] PM: Resume from partition 8:1
[ 5.366529] PM: Checking hibernation image.
[ 5.366799] PM: Resume from disk failed.
[ 5.373933] JFS: nTxBlock = 8192, nTxLock = 65536
[ 8.505289] udevd version 124 started
[ 9.532037] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.645372] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.734722] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 9.740222] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 9.740256] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
[ 9.768024] ACPI: Power Button (FF) [PWRF]
[ 9.768161] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/PNP0C09:00/PNP0C0D:00/input/input3
[ 9.768720] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 9.772864] ACPI: Lid Switch [LID0]
[ 9.772977] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/PNP0C09:00/PNP0C0E:00/input/input4
[ 9.784042] ACPI: Sleep Button (CM) [SLPB]
[ 9.784201] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 9.800026] ACPI: Power Button (CM) [PWRB]
[ 10.908620] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/input/input6
[ 10.920025] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.969184] ACPI: AC Adapter [ADP1] (on-line)
[ 11.152247] ACPI: Battery Slot [BAT1] (battery present)
[ 11.864137] sdhci: Secure Digital Host Controller Interface driver
[ 11.864141] sdhci: Copyright(c) Pierre Ossman
[ 11.901156] sdhci-pci 0000:04:04.2: SDHCI controller found [1217:7120] (rev 1)
[ 11.901175] sdhci-pci 0000:04:04.2: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 11.901195] mmc0: Unknown controller version (16). You may experience problems.
[ 11.901323] mmc0: SDHCI controller on PCI [0000:04:04.2] using PIO
[ 12.820916] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 12.820924] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 12.820946] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 12.916780] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 13.004173] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[ 13.004187] rt61pci 0000:04:09.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
[ 13.021247] phy0: Selected rate control algorithm 'pid'
[ 13.120626] Registered led device: rt61pci-phy0:radio
[ 13.120648] Registered led device: rt61pci-phy0:assoc
[ 13.589646] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio2/input/input8
[ 15.062268] loop: module loaded
[ 15.148356] lp: driver loaded but no devices found
[ 15.562128] Adding 2650684k swap on /dev/sda1. Priority:-1 extents:1 across:2650684k
[ 17.650052] type=1505 audit(1233436960.736:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3853
[ 17.650277] type=1505 audit(1233436960.736:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3853
[ 18.004719] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.540429] NET: Registered protocol family 17
[ 23.866763] NET: Registered protocol family 10
[ 23.867326] lo: Disabled Privacy Extensions
[ 24.814416] ACPI: WMI: Mapper loaded
[ 26.228675] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 26.592242] ppdev: user-space parallel port driver
[ 29.278900] Bluetooth: Core ver 2.13
[ 29.281091] NET: Registered protocol family 31
[ 29.281096] Bluetooth: HCI device and connection manager initialized
[ 29.281100] Bluetooth: HCI socket layer initialized
[ 29.309132] Bluetooth: L2CAP ver 2.11
[ 29.309137] Bluetooth: L2CAP socket layer initialized
[ 29.355469] Bluetooth: SCO (Voice Link) ver 0.6
[ 29.355474] Bluetooth: SCO socket layer initialized
[ 29.399799] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.399804] Bluetooth: BNEP filters: protocol multicast
[ 29.458275] Bridge firewalling registered
[ 29.466540] Bluetooth: RFCOMM socket layer initialized
[ 29.466882] Bluetooth: RFCOMM TTY layer initialized
[ 29.466886] Bluetooth: RFCOMM ver 1.10
[ 33.680408] firmware: requesting rt2561.bin
[ 33.816566] ADDRCONF(NETDEV_UP): wlan0: link is not ready
paulderol
February 3rd, 2009, 04:05 AM
currently wishing i hadn't trashed all my live-usbs for transferring files,,,,and using a kubuntu 8.10 lying around to pull my saved files out of the scrapper. i wonder why the update kills but install-update doesn't.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.