View Full Version : [ubuntu] Ubuntu 7.10 hangs after boot.
January 11th, 2009, 03:29 PM
I have Ubuntu 7.10 installed.
My PC is 4 years old - (P4 2.4GHz, 160GB HDD, 760MB RAM, Intel 845GL graphics card).
Ubuntu rocks, I've been using it for more than an year now, but sometimes only a black screen comes after booting. When I restart, e2fsck (check disk) runs and it restarts the pc. Then it's fine.
1. How to avoid this sequence of events and boot normally?
2. Any other free linux distributions as good as Ubuntu? (I doubt it)
January 11th, 2009, 04:08 PM
There have been a number of improvements since 7.10, particularly in hardware drivers. You might consider 8.10 or 8.04 LTS.
It could be that the linux kernel requires some simple parameters to run properly on your system. The dmesg file is a diagnostic message generated by the kernel. It will contain some helpful information regarding how the kernel is running on your system. It can be difficult to interpret, but some hints are obvious...like "Try using acpi=off." A message like that is telling you to use acpi=off as a boot option at the end of the kernel line in the file /boot/grub/menu.lst. In this section:
## ## End Default Options ##
title Ubuntu 8.10, kernel 2.6.27-9-generic
kernel /boot/vmlinuz-2.6.27-9-generic root=UUID=XXXX ro acpi=off
quiet If you were to look at the same section of the file, shown above, you might see "quiet splash" in place of acpi=off, highlighted above.
To read dmesg try the command
dmesg > ~/Desktop/dmesg.txtthis will write the file to your desktop. You can right click the file and select "create an archive." You can upload the archive here for more help.
January 11th, 2009, 06:25 PM
This is the archived dmesg file.
January 11th, 2009, 07:37 PM
Is there a printer hooked up during boot? There was some bug in Gutsy related to:
type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4767 profile="/usr/sbin/cupsd"From your dmesg.txt
Beyond that, nothing really jumped out at me...maybe try deleting quiet splash and using pci=routeirq.
But my first recommendation is to do a clean install of Intrepid Ibex 8.10.
January 11th, 2009, 07:49 PM
January 11th, 2009, 07:56 PM
well...regardless of whether a printer is actually hooked up, the cups daemon runs during boot. This bug affects apparmor, I believe, and occasionally you are denied /dev/tty.
Do you understand how to try pci=routeirq?
Are you interested in upgrading to 8.10?
January 12th, 2009, 07:07 PM
I did a clean install of Ubuntu 8.10, but not even the Live cd starts. I installed it using the install option in the CD. on hdd boot, no login screen appears. the monitor seems to have a wierd coloured pattern. What may i do?
(P4 2.4GHz, 160GB HDD, 760MB RAM, Intel 845GL graphics card)
Powered by vBulletin® Version 4.2.2 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.