dmesg (brace yourself):
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000ffff800 (ACPI data)
[ 0.000000] BIOS-e820: 000000000ffff800 - 0000000010000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to fff0000 @ 7000-d000
[ 0.000000] RAMDISK: 0f80f000 - 0ffdfd1b
[ 0.000000] DMI 2.1 present.
[ 0.000000] ACPI: RSDP 000F6C30, 0014 (r0 SONY )
[ 0.000000] ACPI: RSDT 0FFFC369, 002C (r1 SONY Z1 20000222 PTL 0)
[ 0.000000] ACPI: FACP 0FFFF765, 0074 (r1 SONY Z1 20000222 PTL F4240)
[ 0.000000] ACPI: DSDT 0FFFC395, 33D0 (r1 SONY Z1 20000222 MSFT 1000007)
[ 0.000000] ACPI: FACS 0FFFFFC0, 0040
[ 0.000000] ACPI: BOOT 0FFFF7D9, 0027 (r1 SONY Z1 20000222 PTL 1)
[ 0.000000] ACPI: DMI BIOS year==0, assuming ACPI-capable machine
[ 0.000000] ACPI: DMI detected: Sony
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fff0000
[ 0.000000] low ram: 00000000 - 0fff0000
[ 0.000000] bootmap 00002000 - 00004000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [000f80f000 - 000ffdfd1b] RAMDISK ==> [000f80f000 - 000ffdfd1b]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000fff0
[ 0.000000] HighMem 0x0000fff0 -> 0x0000fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000fff0
[ 0.000000] On node 0 totalpages: 65423
[ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 60884 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (01241000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e9000
[ 0.000000] PM: Registered nosave memory: 00000000000e9000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff80000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64847
[ 0.000000] Kernel command line: root=UUID=8b69128c-6b82-4e34-9682-3de5b200b75d ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 496.304 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.004000] Memory: 246084k/262080k available (2572k kernel code, 15480k reserved, 1160k data, 424k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xd0800000 - 0xff3fe000 ( 747 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004026] Calibrating delay loop (skipped), value calculated using timer frequency.. 992.60 BogoMIPS (lpj=1985216)
[ 0.004102] Security Framework initialized
[ 0.004131] SELinux: Disabled at boot.
[ 0.004220] AppArmor: AppArmor initialized
[ 0.004255] Mount-cache hash table entries: 512
[ 0.004885] Initializing cgroup subsys ns
[ 0.004902] Initializing cgroup subsys cpuacct
[ 0.004915] Initializing cgroup subsys memory
[ 0.004971] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.004986] CPU: L2 cache: 256K
[ 0.005044] Checking 'hlt' instruction... OK.
[ 0.021215] SMP alternatives: switching to UP code
[ 0.036060] Freeing SMP alternatives: 11k freed
[ 0.036077] ACPI: Core revision 20080609
[ 0.038248] ACPI: Checking initramfs for custom DSDT
[ 1.440684] weird, boot CPU (#0) not listedby the BIOS.
[ 1.440700] SMP motherboard not detected.
[ 1.440712] Local APIC not detected. Using dummy APIC emulation.
[ 1.440723] SMP disabled
[ 1.441021] Brought up 1 CPUs
[ 1.441034] Total of 1 processors activated (992.60 BogoMIPS).
[ 1.441079] CPU0 attaching sched-domain:
[ 1.441093] domain 0: span 0 level CPU
[ 1.441105] groups: 0
[ 1.442208] net_namespace: 840 bytes
[ 1.442252] Booting paravirtualized kernel on bare hardware
[ 1.443250] Time: 21:51:53 Date: 01/10/09
[ 1.443370] NET: Registered protocol family 16
[ 1.445555] EISA bus registered
[ 1.445629] ACPI: bus type pci registered
[ 1.462200] PCI: PCI BIOS revision 2.10 entry at 0xfd99e, last bus=1
[ 1.462215] PCI: Using configuration type 1 for base access
[ 1.470007] ACPI: EC: Look up EC in DSDT
[ 1.493499] ACPI: Interpreter enabled
[ 1.493516] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.493596] ACPI: Using PIC for interrupt routing
[ 1.503791] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.571380] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
[ 1.571396] ACPI: EC: driver started in interrupt mode
[ 1.571680] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.571982] PCI: 0000:00:00.0 reg 10 32bit mmio: [40000000, 40ffffff]
[ 1.572281] PCI: 0000:00:07.1 reg 20 io port: [fcb0, fcbf]
[ 1.572376] PCI: 0000:00:07.2 reg 20 io port: [fc60, fc7f]
[ 1.572496] pci 0000:00:07.3: quirk: region 8000-803f claimed by PIIX4 ACPI
[ 1.572512] pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
[ 1.572534] pci 0000:00:07.3: PIIX4 devres I PIO at 0398-0399
[ 1.572548] pci 0000:00:07.3: PIIX4 devres J PIO at 0398-0399
[ 1.572611] PCI: 0000:00:08.0 reg 10 32bit mmio: [fecfe000, fecfe7ff]
[ 1.572631] PCI: 0000:00:08.0 reg 14 32bit mmio: [fecfec00, fecfedff]
[ 1.572675] PCI: 0000:00:08.0 reg 30 32bit mmio: [0, ffff]
[ 1.572747] PCI: 0000:00:09.0 reg 10 32bit mmio: [fecf0000, fecf7fff]
[ 1.572766] PCI: 0000:00:09.0 reg 14 io port: [fc00, fc3f]
[ 1.572784] PCI: 0000:00:09.0 reg 18 io port: [fcac, fcaf]
[ 1.572840] pci 0000:00:09.0: supports D2
[ 1.572889] PCI: 0000:00:0a.0 reg 10 32bit mmio: [fece0000, feceffff]
[ 1.572908] PCI: 0000:00:0a.0 reg 14 io port: [fca0, fca7]
[ 1.572970] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 1.572985] pci 0000:00:0a.0: PME# disabled
[ 1.573040] PCI: 0000:00:0b.0 reg 10 32bit mmio: [fecff000, fecfffff]
[ 1.573060] PCI: 0000:00:0b.0 reg 14 io port: [fcc0, fcff]
[ 1.573078] PCI: 0000:00:0b.0 reg 18 32bit mmio: [fed00000, fedfffff]
[ 1.573134] pci 0000:00:0b.0: supports D1
[ 1.573143] pci 0000:00:0b.0: supports D2
[ 1.573153] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
[ 1.573167] pci 0000:00:0b.0: PME# disabled
[ 1.573217] PCI: 0000:00:0c.0 reg 10 32bit mmio: [0, fff]
[ 1.573247] pci 0000:00:0c.0: supports D1
[ 1.573255] pci 0000:00:0c.0: supports D2
[ 1.573266] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.573280] pci 0000:00:0c.0: PME# disabled
[ 1.573330] PCI: 0000:00:0d.0 reg 10 32bit mmio: [fecfe800, fecfebff]
[ 1.573477] PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
[ 1.573497] PCI: 0000:01:00.0 reg 14 32bit mmio: [fe400000, fe7fffff]
[ 1.573516] PCI: 0000:01:00.0 reg 18 32bit mmio: [feb00000, febfffff]
[ 1.573569] pci 0000:01:00.0: supports D1
[ 1.573577] pci 0000:01:00.0: supports D2
[ 1.573643] PCI: bridge 0000:00:01.0 32bit mmio: [fe400000, febfffff]
[ 1.573659] PCI: bridge 0000:00:01.0 32bit mmio pref: [fd000000, fdffffff]
[ 1.573706] bus 00 -> node 0
[ 1.573742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.587252] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[ 1.587743] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
[ 1.588320] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled.
[ 1.588811] ACPI: PCI Interrupt Link [LNKD] (IRQs 9) *0, disabled.
[ 1.589579] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.589777] pnp: PnP ACPI init
[ 1.589817] ACPI: bus type pnp registered
[ 1.661202] pnp: PnP ACPI: found 13 devices
[ 1.661217] ACPI: ACPI bus type pnp unregistered
[ 1.661235] PnPBIOS: Disabled by ACPI PNP
[ 1.663259] PCI: Using ACPI for IRQ routing
[ 1.664419] NET: Registered protocol family 8
[ 1.664419] NET: Registered protocol family 20
[ 1.664419] NetLabel: Initializing
[ 1.664419] NetLabel: domain hash size = 128
[ 1.664419] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.664419] NetLabel: unlabeled traffic allowed by default
[ 1.665700] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 1.665712] actual entries 65620
[ 1.666254] AppArmor: AppArmor Filesystem Enabled
[ 1.666315] ACPI: RTC can wake from S4
[ 1.666415] system 00:01: ioport range 0x398-0x399 has been reserved
[ 1.666415] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 1.666415] system 00:01: ioport range 0x1040-0x104f has been reserved
[ 1.666415] system 00:01: ioport range 0x8000-0x804f could not be reserved
[ 1.666415] system 00:02: iomem range 0x100000-0xfffffff could not be reserved
[ 1.666415] system 00:02: iomem range 0x0-0x9ffff could not be reserved
[ 1.666415] system 00:02: iomem range 0xdc000-0xdffff has been reserved
[ 1.666415] system 00:02: iomem range 0xe0000-0xfffff could not be reserved
[ 1.666415] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
[ 1.666415] system 00:02: iomem range 0xfff7f600-0xfff7ffff has been reserved
[ 1.705109] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.705124] pci 0000:00:01.0: IO window: disabled
[ 1.705140] pci 0000:00:01.0: MEM window: 0xfe400000-0xfebfffff
[ 1.705156] pci 0000:00:01.0: PREFETCH window: 0x000000fd000000-0x000000fdffffff
[ 1.705177] pci 0000:00:0c.0: CardBus bridge, secondary bus 0000:02
[ 1.705190] pci 0000:00:0c.0: IO window: 0x001400-0x0014ff
[ 1.705204] pci 0000:00:0c.0: IO window: 0x001800-0x0018ff
[ 1.705219] pci 0000:00:0c.0: PREFETCH window: 0x20000000-0x23ffffff
[ 1.705234] pci 0000:00:0c.0: MEM window: 0x24000000-0x27ffffff
[ 1.705297] pci 0000:00:01.0: power state changed by ACPI to D0
[ 1.705340] pci 0000:00:0c.0: power state changed by ACPI to D0
[ 1.706592] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[ 1.706607] PCI: setting IRQ 9 as level-triggered
[ 1.706622] pci 0000:00:0c.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 1.706641] pci 0000:00:0c.0: setting latency timer to 64
[ 1.706656] bus: 00 index 0 io port: [0, ffff]
[ 1.706667] bus: 00 index 1 mmio: [0, ffffffff]
[ 1.706677] bus: 01 index 0 mmio: [0, 0]
[ 1.706688] bus: 01 index 1 mmio: [fe400000, febfffff]
[ 1.706699] bus: 01 index 2 mmio: [fd000000, fdffffff]
[ 1.706709] bus: 01 index 3 mmio: [0, 0]
[ 1.706721] bus: 02 index 0 io port: [1400, 14ff]
[ 1.706731] bus: 02 index 1 io port: [1800, 18ff]
[ 1.706742] bus: 02 index 2 mmio: [20000000, 23ffffff]
[ 1.706753] bus: 02 index 3 mmio: [24000000, 27ffffff]
[ 1.706799] NET: Registered protocol family 2
[ 1.707526] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 1.708696] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.708908] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.709113] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.709127] TCP reno registered
[ 1.709550] NET: Registered protocol family 1
[ 1.710082] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 3.095959] it is
[ 4.729153] Freeing initrd memory: 8003k freed
[ 4.729926] Simple Boot Flag at 0x35 set to 0x1
[ 4.732086] audit: initializing netlink socket (disabled)
[ 4.732149] type=2000 audit(1231624316.732:1): initialized
[ 4.757911] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 4.772642] VFS: Disk quotas dquot_6.5.1
[ 4.773215] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.773759] msgmni has been set to 496
[ 4.774476] io scheduler noop registered
[ 4.774491] io scheduler anticipatory registered
[ 4.774502] io scheduler deadline registered
[ 4.774593] io scheduler cfq registered (default)
[ 4.774634] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 4.774745] pci 0000:00:0b.0: Firmware left e100 interrupts enabled; disabling
[ 4.774793] pci 0000:01:00.0: Boot video device
[ 4.776628] isapnp: Scanning for PnP cards...
[ 5.130917] isapnp: No Plug & Play device found
[ 5.385864] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 5.386250] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.387494] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 8250
[ 5.390401] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.400603] brd: module loaded
[ 5.401010] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 5.401668] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 5.404975] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.405007] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.407236] mice: PS/2 mouse device common for all mice
[ 5.408106] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 5.408153] rtc0: alarms up to one month, y3k
[ 5.408860] EISA: Probing bus 0 at eisa.0
[ 5.408886] Cannot allocate resource for EISA slot 1
[ 5.408939] Cannot allocate resource for EISA slot 8
[ 5.408949] EISA: Detected 0 cards.
[ 5.408962] cpuidle: using governor ladder
[ 5.408972] cpuidle: using governor menu
[ 5.411850] TCP cubic registered
[ 5.411974] Using IPI No-Shortcut mode
[ 5.413408] registered taskstats version 1
[ 5.413882] Magic number: 9:287:904
[ 5.414086] tty ptyz0: hash matches
[ 5.414290] rtc_cmos 00:04: setting system clock to 2009-01-10 21:51:57 UTC (1231624317)
[ 5.414306] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.414316] EDD information not available.
[ 5.416218] Freeing unused kernel memory: 424k freed
[ 5.416478] Write protecting the kernel text: 2576k
[ 5.416629] Write protecting the kernel read-only data: 936k
[ 5.439887] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 6.323984] fuse init (API version 7.9)
[ 6.503470] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 6.503749] processor ACPI0007:00: registered as cooling_device0
[ 6.503773] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 6.524889] thermal LNXTHERM:01: registered as thermal_zone0
[ 6.528428] ACPI: Thermal Zone [ATF0] (44 C)
[ 9.230442] usbcore: registered new interface driver usbfs
[ 9.230539] usbcore: registered new interface driver hub
[ 9.282284] No dock devices found.
[ 9.424790] usbcore: registered new device driver usb
[ 9.831836] SCSI subsystem initialized
[ 9.852888] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 9.852903] e100: Copyright(c) 1999-2006 Intel Corporation
[ 9.867927] e100 0000:00:0b.0: power state changed by ACPI to D0
[ 9.869221] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 9.869240] e100 0000:00:0b.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 9.892149] e100 0000:00:0b.0: PME# disabled
[ 9.895424] USB Universal Host Controller Interface driver v3.0
[ 9.965445] e100: eth0: e100_probe: addr 0xfecff000, irq 9, MAC addr 08:00:46:06:78:1a
[ 9.965676] uhci_hcd 0000:00:07.2: power state changed by ACPI to D0
[ 9.966915] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 9.966934] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 9.966964] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 9.967154] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 9.967212] uhci_hcd 0000:00:07.2: irq 9, io base 0x0000fc60
[ 9.967907] usb usb1: configuration #1 chosen from 1 choice
[ 9.968113] hub 1-0:1.0: USB hub found
[ 9.968157] hub 1-0:1.0: 2 ports detected
[ 10.134189] ohci1394 0000:00:08.0: power state changed by ACPI to D0
[ 10.134216] ohci1394 0000:00:08.0: enabling device (0000 -> 0002)
[ 10.134245] ohci1394 0000:00:08.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 10.187306] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[fecfe000-fecfe7ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 10.201365] libata version 3.00 loaded.
[ 10.253345] ata_piix 0000:00:07.1: version 2.12
[ 10.255997] scsi0 : ata_piix
[ 10.256812] scsi1 : ata_piix
[ 10.257828] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcb0 irq 14
[ 10.257843] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcb8 irq 15
[ 10.420689] ata1.00: ATA-6: ST9808211A, 8.03, max UDMA/100
[ 10.420707] ata1.00: 156301488 sectors, multi 16: LBA48
[ 10.436623] ata1.00: configured for UDMA/33
[ 10.592770] scsi 0:0:0:0: Direct-Access ATA ST9808211A 8.03 PQ: 0 ANSI: 5
[ 11.496654] ieee1394: Host added: ID:BUS[0-00:1023] GUID[08004603004f6e49]
[ 12.637338] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.720894] Driver 'sd' needs updating - please use bus_type methods
[ 12.721329] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 12.721426] sd 0:0:0:0: [sda] Write Protect is off
[ 12.721441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.721608] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.721937] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 12.722028] sd 0:0:0:0: [sda] Write Protect is off
[ 12.722043] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.722209] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.722234] sda:Marking TSC unstable due to TSC halts in idle
[ 12.743639] sda1 sda2 < sda5 >
[ 12.763995] sd 0:0:0:0: [sda] Attached SCSI disk
[ 13.204073] Clocksource tsc unstable (delta = -230375947 ns)
[ 13.234378] PM: Starting manual resume from disk
[ 13.234397] PM: Resume from partition 8:5
[ 13.234406] PM: Checking hibernation image.
[ 13.234892] PM: Resume from disk failed.
[ 13.359125] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 13.359141] EXT3-fs: write access will be enabled during recovery.
[ 16.512575] kjournald starting. Commit interval 5 seconds
[ 16.512644] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 16.512672] ext3_orphan_cleanup: deleting unreferenced inode 4136984
[ 16.512781] EXT3-fs: sda1: 1 orphan inode deleted
[ 16.512792] EXT3-fs: recovery complete.
[ 16.522829] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.862106] udevd version 124 started
[ 30.088950] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.612547] Linux agpgart interface v0.103
[ 30.743192] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.954990] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 31.957454] agpgart-intel 0000:00:00.0: AGP aperture is 16M @ 0x40000000
[ 31.962998] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x1040, revision 0
[ 32.035609] Yenta: CardBus bridge found at 0000:00:0c.0 [104d:8082]
[ 32.173036] Yenta: ISA IRQ mask 0x08b8, PCI irq 9
[ 32.173051] Socket status: 30000819
[ 32.769605] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 32.868130] pccard: PCMCIA card inserted into slot 0
[ 33.058881] udev: renamed network interface eth0 to eth1
[ 33.449884] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 33.464174] ACPI: Power Button (CM) [PWRB]
[ 35.259848] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input4
[ 35.281152] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input5
[ 37.627169] parport_pc 00:0c: reported by Plug and Play ACPI
[ 37.627260] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 38.225937] sony-laptop: Sony Programmable IO Control Driver v0.6.
[ 38.225965] sony-laptop: detected Type1 model
[ 38.262635] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/SNY6001:00/input/input6
[ 38.272601] input: Sony Vaio Jogdial as /devices/virtual/input/input7
[ 38.285054] sony-laptop: device allocated minor is 60
[ 38.291005] sony-laptop: Sony Notebook Control Driver v0.6.
[ 39.360005] irda_init()
[ 39.360103] NET: Registered protocol family 23
[ 39.570848] nsc_ircc_pnp_probe() : From PnP, found firbase 0x3E8 ; irq 10 ; dma 0.
[ 39.570932] nsc-ircc, chip->init
[ 39.570945] nsc-ircc, Found chip at base=0x398
[ 39.570984] nsc-ircc, driver loaded (Dag Brattli)
[ 39.571009] nsc_ircc_open(), can't get iobase of 0x3e8
[ 39.571042] nsc-ircc, Found chip at base=0x398
[ 39.571080] nsc-ircc, driver loaded (Dag Brattli)
[ 39.571093] nsc_ircc_open(), can't get iobase of 0x3e8
[ 39.577281] nsc-ircc 00:0b: disabled
[ 40.440005] ACPI: AC Adapter [ACAD] (on-line)
[ 40.487857] ACPI: Battery Slot [BAT1] (battery present)
[ 41.440412] Yamaha DS-1 PCI 0000:00:09.0: enabling device (0006 -> 0007)
[ 41.441645] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 41.441664] Yamaha DS-1 PCI 0000:00:09.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 41.444172] firmware: requesting yamaha/ds1_dsp.fw
[ 45.327915] cs: IO port probe 0x100-0x3af: clean.
[ 45.330188] cs: IO port probe 0x3e0-0x4ff: clean.
[ 45.331217] cs: IO port probe 0x820-0x8ff: clean.
[ 45.332145] cs: IO port probe 0xc00-0xcf7: clean.
[ 45.333622] cs: IO port probe 0xa00-0xaff: clean.
[ 45.334620] cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 45.341488] pcmcia: registering new device pcmcia0.0
[ 47.418112] firmware: requesting yamaha/ds1e_ctrl.fw
[ 48.008940] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 48.031269] orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 48.267707] eth0: Hardware identity 800c:0000:0001:0000
[ 48.267851] eth0: Station identity 001f:0005:0001:0003
[ 48.267865] eth0: Firmware determined as Intersil 1.3.5
[ 48.267876] eth0: Ad-hoc demo mode supported
[ 48.267886] eth0: IEEE standard IBSS ad-hoc mode supported
[ 48.267895] eth0: WEP supported, 104-bit key
[ 48.267994] eth0: MAC address 00:05:5d:5b:d5:85
[ 48.268136] eth0: Station name "Prism I"
[ 48.268802] eth0: ready
[ 48.271281] eth0: orinoco_cs at 0.0, irq 3, io 0x0100-0x013f
[ 48.365760] ieee80211_crypt: registered algorithm 'NULL'
[ 48.498234] udev: renamed network interface eth0 to eth2
[ 49.851775] lp0: using parport0 (interrupt-driven).
[ 50.342624] Adding 2931820k swap on /dev/sda5. Priority:-1 extents:1 across:2931820k
[ 51.077836] EXT3 FS on sda1, internal journal
[ 53.085021] type=1505 audit(1231624365.639:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3829
[ 54.089979] type=1505 audit(1231624366.643:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3834
[ 54.091127] type=1505 audit(1231624366.643:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3834
[ 54.527100] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 56.677728] ACPI: WMI: Mapper loaded
[ 60.630404] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 60.843101] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 60.843133] apm: overridden by ACPI.
[ 61.258955] ppdev: user-space parallel port driver
[ 62.182157] sonypi: Sony Programmable I/O Controller Driver v1.26.
[ 62.187059] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
[ 62.187144] sonypi: ioport 0x1080 busy, using sony-laptop? if not use check_ioport=0
[ 62.187160] sonypi: failed to request ioports
[ 62.204101] sonypi: probe of sonypi failed with error -16
[ 64.428534] ttyS2: LSR safety check engaged!
[ 64.975088] Bluetooth: Core ver 2.13
[ 64.982795] NET: Registered protocol family 31
[ 64.982823] Bluetooth: HCI device and connection manager initialized
[ 64.982838] Bluetooth: HCI socket layer initialized
[ 65.102105] Bluetooth: L2CAP ver 2.11
[ 65.102138] Bluetooth: L2CAP socket layer initialized
[ 65.199766] Bluetooth: RFCOMM socket layer initialized
[ 65.200961] Bluetooth: RFCOMM TTY layer initialized
[ 65.200992] Bluetooth: RFCOMM ver 1.10
[ 65.211017] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 65.211043] Bluetooth: BNEP filters: protocol multicast
[ 65.419140] Bridge firewalling registered
[ 65.424367] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 65.507525] Bluetooth: SCO (Voice Link) ver 0.6
[ 65.507555] Bluetooth: SCO socket layer initialized
[ 69.810359] eth2: New link status: Disconnected (0002)
[ 70.050275] NET: Registered protocol family 17
[ 70.165701] eth2: New link status: Connected (0001)
[ 100.683099] eth2: New link status: Disconnected (0002)
[ 101.264484] eth2: New link status: Connected (0001)
[ 179.895803] NET: Registered protocol family 10
[ 179.903505] lo: Disabled Privacy Extensions
[ 179.909260] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 183.104744] ppdev0: registered pardevice
[ 183.243748] ppdev0: unregistered pardevice
[ 184.564419] ppdev0: registered pardevice
[ 184.616160] ppdev0: unregistered pardevice
[ 184.846717] ttyS2: LSR safety check engaged!
[ 184.846792] type=1503 audit(1231624495.231:5): operation="capable" name="sys_admin" pid=5435 profile="/usr/sbin/cupsd"
[ 187.929034] ppdev0: registered pardevice
[ 187.976691] ppdev0: unregistered pardevice
[ 190.720062] eth2: no IPv6 routers present
pillard@pillard-laptop:~$
lspci: 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
00:08.0 FireWire (IEEE 1394): Sony Corporation CXD3222 i.LINK Controller (rev 02)
00:09.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S Audio Controller] (rev 02)
00:0a.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem (Mob WorldW SmartDAA) (rev 01)
00:0b.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08)
00:0c.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
00:0d.0 FLASH memory: Sony Corporation Memory Stick Controller (rev 01)
01:00.0 VGA compatible controller: Neomagic Corporation NM2200 [MagicGraph 256AV] (rev 20)
pillard@pillard-laptop:~$
and finally - lsb_release -a:
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 8.10
Release: 8.10
Codename: intrepid
pillard@pillard-laptop:~$
Will do the memtest now....