PDA

View Full Version : [ubuntu] Eth0 is gone



Jappsta
January 3rd, 2009, 12:35 PM
Hi all,
I'm running ubuntu 8.10 on my laptop (hp 8510w) dual booting with windows. Only problem is, my wired network connection isn't working. It works fine with windows but somehow eth0 doesn't show up in ifconfig. dmesg gives me this entry:

[ 2.103947] libata version 3.00 loaded.
[ 2.106286] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 2.106287] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 2.106334] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.106344] e1000e 0000:00:19.0: setting latency timer to 64

I tried modprobe e1000 but nothing seems to happen.
I'm completely stumped, does anyone have an idea what might solve this?
Thanks in advance,
Hidde

Edit:
Just found another clue in dmesg,

[ 2.165984] e1000e 0000:00:19.0: PCI INT A disabled
[ 2.166008] e1000e: probe of 0000:00:19.0 failed with error -5

Edit2:

lshw:
*-network UNCLAIMED
description: Ethernet controller
product: 82566DC Gigabit Network Connection
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: cap_list
configuration: latency=0
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: pan0
serial: fe:b1:18:36:ab:30
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A multicast=yes

Jappsta
January 5th, 2009, 07:42 PM
I'm completely stumped and my problem persists, any help would be greatly appreciated.

Thanks,
Hidde