PDA

View Full Version : help me source a product...


hardyn
December 17th, 2008, 01:11 AM
I am looking for basic basic basic steel (will take aluminum) wall mount mini-itx case for an embedded application.

i am looking for a steel box, that will accept a full height, 1/2 length PCI. I do not need optical, do not need front USB, do need 2.5in disk mounting, would prefer not have to use 90deg. PCI adapter.

Maybe something that looks like this, but double the hight to accept the PCI card.
http://www.mini-itx.com/store/images/1188-wall-mount-case.jpg

Thanks for any help.
gn2
December 17th, 2008, 01:16 AM
What's the PCI card that you "have" to accomodate?
hardyn
December 17th, 2008, 01:17 AM
What's the PCI card that you "have" to accomodate?

Servo i/o card.
gn2
December 17th, 2008, 01:19 AM
Servo i/o card.

Any links?
hardyn
December 17th, 2008, 01:25 AM
Any links?

http://www.sensoray.com/products/626data.htm
gn2
December 17th, 2008, 01:49 AM
Have had a look around, seems like a riser card is probably going to be needed unless you can wall mount a shuttle case on a bracket?

Found these:
http://www.advansus.com.tw/products/205/EEC310%20series
http://www.advansus.com.tw/products/206/EE410%20series
hardyn
December 17th, 2008, 02:07 AM
Thanks for the help, looking for stand alone case though (no motherboard).

Thanks again.