Hello forum,
I got a problem with my PCMCI WIFI card. Actually I got 2 problems:
1) And this happend already with 8.04: booting with my WIFI card in the pcmcia slot did not work. booting always got stuck. I found a work around and only inserted the card *after* booting. Not real fun but working.
2) With 8.10 still the same with booting. But now the card doesnt seem to work even if I put it in the slot after booting.
Anyone has an idea how to solve this?
Environment:
Laptop Dell Inspiron 8000 (way old)
500 MB RAM
Kernel 2.6.27-7
WIFI: Zyxel ZyAIR B-100
Output from lspci:
Code:
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801BAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801BAM IDE U100 Controller (rev 02)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 Go] (rev b2)
02:03.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator (rev 10)
02:06.0 PCI bridge: Actiontec Electronics Inc Mini-PCI bridge (rev 11)
02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
02:0f.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394 Controller
08:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08)
08:08.0 Communication controller: Agere Systems WinModem 56k (rev 01)
output from lshw:
Code:
*-network
description: Ethernet interface
product: 82557/8/9/0/1 Ethernet Pro 100
vendor: Intel Corporation
physical id: 4
bus info: pci@0000:08:04.0
logical name: eth0
version: 08
serial: 00:20:e0:68:5b:5c
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.23-k4-NAPI duplex=half firmware=N/A latency=32 link=no maxlatency=56 mingnt=8 module=e100 multicast=yes port=MII speed=10MB/s
*-network
description: 11M WLAN Card v3.0
vendor: PCMCIA
physical id: 0
slot: Socket 0
resources: irq:3
*-network:0 DISABLED
description: Ethernet interface
physical id: 3
logical name: pan0
serial: 02:0a:f1:2b:ad:f0
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
*-network:1
description: Wireless interface
physical id: 4
logical name: wlan0
serial: 00:a0:c5:40:37:ec
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=hostap firmware=1.4.2 multicast=yes wireless=IEEE 802.11b
extract from dmesg as attachment.
Any help is appreaciated!
/pelagic
Bookmarks