Page 2 of 18 FirstFirst 123412 ... LastLast
Results 11 to 20 of 171

Thread: Alsa 1.0.18 Installation Script

  1. #11
    Join Date
    Jun 2007
    Beans
    10,903

    Re: Alsa 1.0.18 Installation Script

    Many people will find this useful:

    Configuring alsa-base

    To identify your codec:
    Code:
    aplay -l
    cat /proc/asound/card0/codec#* | grep Codec
    Now, open /etc/modprobe.d/alsa-base with the following command:
    Code:
    gksudo gedit /etc/modprobe.d/alsa-base
    Modify or add this line with modelname = to the appropriate model name from the list below:
    Code:
    options snd-hda-intel model=modelname
    Code:
      Module snd-hda-intel
      --------------------
    
        Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10,
    			PCH, SCH),
    		ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620,
    			RV630, RV635, RV670, RV770,
    		VIA VT8251/VT8237A,
    		SIS966, ULI M5461
    
        [Multiple options for each card instance]
        model	- force the model name
        position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
        probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
        bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
    		Passing -1 will make the driver to choose the appropriate
    		value based on the controller chip.
        
        [Single (global) options]
        single_cmd  - Use single immediate commands to communicate with
    		codecs (for debugging only)
        enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
        power_save	- Automatic power-saving timtout (in second, 0 =
    		disable)
        power_save_controller - Reset HD-audio controller in power-saving mode
    		(default = on)
    
        This module supports multiple cards and autoprobe.
        
        Each codec may have a model table for different configurations.
        If your machine isn't listed there, the default (usually minimal)
        configuration is set up.  You can pass "model=<name>" option to
        specify a certain model in such a case.  There are different
        models depending on the codec chip.
    
    	  Model name	Description
    	  ----------    -----------
    	ALC880
    	  3stack	3-jack in back and a headphone out
    	  3stack-digout	3-jack in back, a HP out and a SPDIF out
    	  5stack	5-jack in back, 2-jack in front
    	  5stack-digout	5-jack in back, 2-jack in front, a SPDIF out
    	  6stack	6-jack in back, 2-jack in front
    	  6stack-digout	6-jack with a SPDIF out
    	  w810		3-jack
    	  z71v		3-jack (HP shared SPDIF)
    	  asus		3-jack (ASUS Mobo)
    	  asus-w1v	ASUS W1V
    	  asus-dig	ASUS with SPDIF out
    	  asus-dig2	ASUS with SPDIF out (using GPIO2)
    	  uniwill	3-jack
    	  fujitsu	Fujitsu Laptops (Pi1536)
    	  F1734		2-jack
    	  lg		LG laptop (m1 express dual)
    	  lg-lw		LG LW20/LW25 laptop
    	  tcl		TCL S700
    	  clevo		Clevo laptops (m520G, m665n)
    	  medion	Medion Rim 2150
    	  test		for testing/debugging purpose, almost all controls can be
    			adjusted.  Appearing only when compiled with
    			$CONFIG_SND_DEBUG=y
    	  auto		auto-config reading BIOS (default)
    
    	ALC260
    	  hp		HP machines
    	  hp-3013	HP machines (3013-variant)
    	  hp-dc7600	HP DC7600
    	  fujitsu	Fujitsu S7020
    	  acer		Acer TravelMate
    	  will		Will laptops (PB V7900)
    	  replacer	Replacer 672V
    	  basic		fixed pin assignment (old default model)
    	  test		for testing/debugging purpose, almost all controls can
    			adjusted.  Appearing only when compiled with
    			$CONFIG_SND_DEBUG=y
    	  auto		auto-config reading BIOS (default)
    
    	ALC262
    	  fujitsu	Fujitsu Laptop
    	  hp-bpc	HP xw4400/6400/8400/9400 laptops
    	  hp-bpc-d7000	HP BPC D7000
    	  hp-tc-t5735	HP Thin Client T5735
    	  hp-rp5700	HP RP5700
    	  benq		Benq ED8
    	  benq-t31	Benq T31
    	  hippo		Hippo (ATI) with jack detection, Sony UX-90s
    	  hippo_1	Hippo (Benq) with jack detection
    	  sony-assamd	Sony ASSAMD
    	  toshiba-s06	Toshiba S06
    	  toshiba-rx1	Toshiba RX1
    	  ultra		Samsung Q1 Ultra Vista model
    	  lenovo-3000	Lenovo 3000 y410
    	  nec		NEC Versa S9100
    	  basic		fixed pin assignment w/o SPDIF
    	  auto		auto-config reading BIOS (default)
    
    	ALC267/268
    	  quanta-il1	Quanta IL1 mini-notebook
    	  3stack	3-stack model
    	  toshiba	Toshiba A205
    	  acer		Acer laptops
    	  acer-aspire	Acer Aspire One
    	  dell		Dell OEM laptops (Vostro 1200)
    	  zepto		Zepto laptops
    	  test		for testing/debugging purpose, almost all controls can
    			adjusted.  Appearing only when compiled with
    			$CONFIG_SND_DEBUG=y
    	  auto		auto-config reading BIOS (default)
    
    	ALC269
    	  basic		Basic preset
    	  quanta	Quanta FL1
    	  eeepc-p703	ASUS Eeepc P703 P900A
    	  eeepc-p901	ASUS Eeepc P901 S101
    
    	ALC662/663
    	  3stack-dig	3-stack (2-channel) with SPDIF
    	  3stack-6ch	 3-stack (6-channel)
    	  3stack-6ch-dig 3-stack (6-channel) with SPDIF
    	  6stack-dig	 6-stack with SPDIF
    	  lenovo-101e	 Lenovo laptop
    	  eeepc-p701	ASUS Eeepc P701
    	  eeepc-ep20	ASUS Eeepc EP20
    	  ecs		ECS/Foxconn mobo
    	  m51va		ASUS M51VA
    	  g71v		ASUS G71V
    	  h13		ASUS H13
    	  g50v		ASUS G50V
    	  asus-mode1	ASUS
    	  asus-mode2	ASUS
    	  asus-mode3	ASUS
    	  asus-mode4	ASUS
    	  asus-mode5	ASUS
    	  asus-mode6	ASUS
    	  auto		auto-config reading BIOS (default)
    
    	ALC882/885
    	  3stack-dig	3-jack with SPDIF I/O
    	  6stack-dig	6-jack digital with SPDIF I/O
    	  arima		Arima W820Di1
    	  targa		Targa T8, MSI-1049 T8
    	  asus-a7j	ASUS A7J
    	  asus-a7m	ASUS A7M
    	  macpro	MacPro support
    	  mbp3		Macbook Pro rev3
    	  imac24	iMac 24'' with jack detection
    	  w2jc		ASUS W2JC
    	  auto		auto-config reading BIOS (default)
    
    	ALC883/888
    	  3stack-dig	3-jack with SPDIF I/O
    	  6stack-dig	6-jack digital with SPDIF I/O
    	  3stack-6ch    3-jack 6-channel
    	  3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
    	  6stack-dig-demo  6-jack digital for Intel demo board
    	  acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
    	  acer-aspire	Acer Aspire 9810
    	  medion	Medion Laptops
    	  medion-md2	Medion MD2
    	  targa-dig	Targa/MSI
    	  targa-2ch-dig	Targs/MSI with 2-channel
    	  laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
    	  lenovo-101e	Lenovo 101E
    	  lenovo-nb0763	Lenovo NB0763
    	  lenovo-ms7195-dig Lenovo MS7195
    	  lenovo-sky	Lenovo Sky
    	  haier-w66	Haier W66
    	  3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
    	  6stack-dell	Dell machines with 6stack (Inspiron 530)
    	  mitac		Mitac 8252D
    	  clevo-m720	Clevo M720 laptop series
    	  fujitsu-pi2515 Fujitsu AMILO Pi2515
    	  3stack-6ch-intel Intel DG33* boards
    	  auto		auto-config reading BIOS (default)
    
    	ALC861/660
    	  3stack	3-jack
    	  3stack-dig	3-jack with SPDIF I/O
    	  6stack-dig	6-jack with SPDIF I/O
    	  3stack-660	3-jack (for ALC660)
    	  uniwill-m31	Uniwill M31 laptop
    	  toshiba	Toshiba laptop support
    	  asus		Asus laptop support
    	  asus-laptop	ASUS F2/F3 laptops
    	  auto		auto-config reading BIOS (default)
    
    	ALC861VD/660VD
    	  3stack	3-jack
    	  3stack-dig	3-jack with SPDIF OUT
    	  6stack-dig	6-jack with SPDIF OUT
    	  3stack-660	3-jack (for ALC660VD)
    	  3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
    	  lenovo	Lenovo 3000 C200
    	  dallas	Dallas laptops
    	  hp		HP TX1000
    	  auto		auto-config reading BIOS (default)
    
    	CMI9880
    	  minimal	3-jack in back
    	  min_fp	3-jack in back, 2-jack in front
    	  full		6-jack in back, 2-jack in front
    	  full_dig	6-jack in back, 2-jack in front, SPDIF I/O
    	  allout	5-jack in back, 2-jack in front, SPDIF out
    	  auto		auto-config reading BIOS (default)
    
    	AD1882 / AD1882A
    	  3stack	3-stack mode (default)
    	  6stack	6-stack mode
    
    	AD1884A / AD1883 / AD1984A / AD1984B
    	  desktop	3-stack desktop (default)
    	  laptop	laptop with HP jack sensing
    	  mobile	mobile devices with HP jack sensing
    	  thinkpad	Lenovo Thinkpad X300
    
    	AD1884
    	  N/A
    
    	AD1981
    	  basic		3-jack (default)
    	  hp		HP nx6320
    	  thinkpad	Lenovo Thinkpad T60/X60/Z60
    	  toshiba	Toshiba U205
    
    	AD1983
    	  N/A
    
    	AD1984
    	  basic		default configuration
    	  thinkpad	Lenovo Thinkpad T61/X61
    	  dell		Dell T3400
    
    	AD1986A
    	  6stack	6-jack, separate surrounds (default)
    	  3stack	3-stack, shared surrounds
    	  laptop	2-channel only (FSC V2060, Samsung M50)
    	  laptop-eapd	2-channel with EAPD (Samsung R65, ASUS A6J)
    	  laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
    	  ultra		2-channel with EAPD (Samsung Ultra tablet PC)
    
    	AD1988/AD1988B/AD1989A/AD1989B
    	  6stack	6-jack
    	  6stack-dig	ditto with SPDIF
    	  3stack	3-jack
    	  3stack-dig	ditto with SPDIF
    	  laptop	3-jack with hp-jack automute
    	  laptop-dig	ditto with SPDIF
    	  auto		auto-config reading BIOS (default)
    	
    	Conexant 5045
    	  laptop-hpsense    Laptop with HP sense (old model laptop)
    	  laptop-micsense   Laptop with Mic sense (old model fujitsu)
    	  laptop-hpmicsense Laptop with HP and Mic senses
    	  benq		Benq R55E
    	  test		for testing/debugging purpose, almost all controls
    			can be adjusted.  Appearing only when compiled with
    			$CONFIG_SND_DEBUG=y
    
    	Conexant 5047
    	  laptop	Basic Laptop config 
    	  laptop-hp	Laptop config for some HP models (subdevice 30A5)
    	  laptop-eapd	Laptop config with EAPD support
    	  test		for testing/debugging purpose, almost all controls
    			can be adjusted.  Appearing only when compiled with
    			$CONFIG_SND_DEBUG=y
    
    	Conexant 5051
    	  laptop	Basic Laptop config (default)
    	  hp		HP Spartan laptop
    
    	STAC9200
    	  ref		Reference board
    	  dell-d21	Dell (unknown)
    	  dell-d22	Dell (unknown)
    	  dell-d23	Dell (unknown)
    	  dell-m21	Dell Inspiron 630m, Dell Inspiron 640m
    	  dell-m22	Dell Latitude D620, Dell Latitude D820
    	  dell-m23	Dell XPS M1710, Dell Precision M90
    	  dell-m24	Dell Latitude 120L
    	  dell-m25	Dell Inspiron E1505n
    	  dell-m26	Dell Inspiron 1501
    	  dell-m27	Dell Inspiron E1705/9400
    	  gateway	Gateway laptops with EAPD control
    	  panasonic	Panasonic CF-74
    
    	STAC9205/9254
    	  ref		Reference board
    	  dell-m42	Dell (unknown)
    	  dell-m43	Dell Precision
    	  dell-m44	Dell Inspiron
    
    	STAC9220/9221
    	  ref		Reference board
    	  3stack	D945 3stack
    	  5stack	D945 5stack + SPDIF
    	  intel-mac-v1	Intel Mac Type 1
    	  intel-mac-v2	Intel Mac Type 2
    	  intel-mac-v3	Intel Mac Type 3
    	  intel-mac-v4	Intel Mac Type 4
    	  intel-mac-v5	Intel Mac Type 5
    	  intel-mac-auto Intel Mac (detect type according to subsystem id)
    	  macmini	Intel Mac Mini (equivalent with type 3)
    	  macbook	Intel Mac Book (eq. type 5)
    	  macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
    	  macbook-pro	Intel Mac Book Pro 2nd generation (eq. type 3)
    	  imac-intel	Intel iMac (eq. type 2)
    	  imac-intel-20	Intel iMac (newer version) (eq. type 3)
    	  dell-d81	Dell (unknown)
    	  dell-d82	Dell (unknown)
    	  dell-m81	Dell (unknown)
    	  dell-m82	Dell XPS M1210
    
    	STAC9202/9250/9251
    	  ref		Reference board, base config
    	  m2-2		Some Gateway MX series laptops
    	  m6		Some Gateway NX series laptops
    	  pa6		Gateway NX860 series
    
    	STAC9227/9228/9229/927x
    	  ref		Reference board
    	  3stack	D965 3stack
    	  5stack	D965 5stack + SPDIF
    	  dell-3stack	Dell Dimension E520
    	  dell-bios	Fixes with Dell BIOS setup
    
    	STAC92HD71B*
    	  ref		Reference board
    	  dell-m4-1	Dell desktops
    	  dell-m4-2	Dell desktops
    
    	STAC92HD73*
    	  ref		Reference board
    	  dell-m6	Dell desktops
    
    	STAC9872
    	  vaio		Setup for VAIO FE550G/SZ110
    	  vaio-ar Setup for VAIO AR
    
        The model name "genric" is treated as a special case.  When this
        model is given, the driver uses the generic codec parser without
        "codec-patch".  It's sometimes good for testing and debugging.
    
        If the default configuration doesn't work and one of the above
        matches with your device, report it together with the PCI
        subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
        ML (see the section "Links and Addresses").

  2. #12
    Join Date
    Jul 2007
    Location
    DUS
    Beans
    183

    Re: Alsa 1.0.18 Installation Script

    Hi folks.

    I need to update the script. You'll find a revision 1.11. for download

    Obviously the lib has to be installed with "make install", prior to
    compiling the utils. So - my guess was right.


    BTW: I am not available for the next 3 days!!! Don't expect me to answer your questions while I am away.

    THX for the feedback.
    Last edited by soundcheck; October 31st, 2008 at 10:44 AM.

  3. #13
    Join Date
    Apr 2007
    Beans
    196

    Re: Alsa 1.0.18 Installation Script

    Does this help in getting spdif out with pulseaudio?. If so I may try it.

  4. #14
    Join Date
    Oct 2008
    Location
    ~/
    Beans
    17
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: Alsa 1.0.18 Installation Script

    Is there a launchpad repository for 1.0.18? as much as source builds sounds like an adventure almost worth trying, I'd rather be garnering packages from the ubuntu development team.

  5. #15
    Join Date
    Nov 2007
    Beans
    3
    Distro
    Kubuntu 7.10 Gutsy Gibbon

    Angry Re: Help Me ... Alsa 1.0.18 Installation Script

    make: *** [compile] Error 2
    alsa-driver-1.0.18 make failed

    Your ALSA information is located at
    http://www.alsa-project.org/db/?f=fe...1ae9f2b4fa1071

    Code:
    -------------------------------------------------------------
    -  Working on following Alsa packages...
    -------------------------------------------------------------
    
    Driver: alsa-driver-1.0.18
    Library: alsa-lib-1.0.18
    Plugins: alsa-plugins-1.0.18
    Utils: alsa-utils-1.0.18
    Firmware: alsa-firmware-1.0.17
    OSS: alsa-oss-1.0.17
    
    -------------------------------------------------------------
    -  Installing packages required to build ALSA...
    -------------------------------------------------------------
    
    Lettura della lista dei pacchetti in corso...
    Generazione dell'albero delle dipendenze in corso...
    Lettura informazioni sullo stato...
    build-essential è già alla versione più recente.
    libsysfs-dev è già alla versione più recente.
    libncurses5-dev è già alla versione più recente.
    libncurses5-dev impostato per installazione manuale.
    gettext è già alla versione più recente.
    gettext impostato per installazione manuale.
    linux-headers-2.6.27-7-generic è già alla versione più recente.
    libpulse-dev è già alla versione più recente.
    I seguenti pacchetti erano stati automaticamente installati e non sono più richiesti:
      libmime-types-perl libnet-ssleay-perl libfile-remove-perl
      libdigest-sha1-perl bison libboost-signals1.34.1 libossp-uuid-perl
      libboost-program-options1.34.1 libmudflap0-dev libcrypt-ssleay-perl quilt
      libboost-date-time1.34.1 libestools1.2 libmime-tools-perl
      libboost-test1.34.1 libboost-iostreams1.34.1 libboost-wave1.34.1
      libboost-graph1.34.1 libfcgi-perl cdbs libaspell-dev festlex-cmu intltool
      libsoap-lite-perl fdupes festvox-kallpc16k kttsd libmikmod2
      libboost-thread1.34.1 libmudflap0 libmail-box-perl module-assistant flex
      debconf-utils kernel-package xli libboost-serialization1.34.1 libcamel1.2-13
      festival festlex-poslex libboost-regex1.34.1 libobject-realize-later-perl
      libuser-identity-perl libconvert-binhex-perl libio-socket-ssl-perl
      libossp-uuid15 libdigest-hmac-perl libboost-filesystem1.34.1
    Usare 'apt-get autoremove' per rimuoverli.
    I seguenti pacchetti verranno inoltre installati:
      docbook-xsl docbook-xsl-doc-html python-all python2.4 python2.4-dev
      python2.4-minimal
    Pacchetti suggeriti:
      fop libsaxon-java xalan python2.4-doc python-profiler
    I seguenti pacchetti NUOVI (NEW) saranno installati:
      docbook-xsl docbook-xsl-doc-html libspeex-dev python-all python-all-dev
      python2.4 python2.4-dev python2.4-minimal xmlto
    0 aggiornati, 9 installati, 0 da rimuovere e 0 non aggiornati.
    È necessario prendere 7655kB di archivi. 
    Dopo quest'operazione, verranno occupati 37,4MB di spazio su disco.
    Get:1 http://it.archive.ubuntu.com intrepid/main docbook-xsl 1.73.2.dfsg.1-4 [1345kB]
    Get:2 http://it.archive.ubuntu.com intrepid/main docbook-xsl-doc-html 1.73.2.dfsg.1-4 [551kB]
    Get:3 http://it.archive.ubuntu.com intrepid/main libspeex-dev 1.2~beta4-2 [82,5kB]
    Get:4 http://it.archive.ubuntu.com intrepid/main python2.4-minimal 2.4.5-5ubuntu1 [1063kB]
    Get:5 http://it.archive.ubuntu.com intrepid/main python2.4 2.4.5-5ubuntu1 [2931kB]
    Get:6 http://it.archive.ubuntu.com intrepid/main python-all 2.5.2-1ubuntu1 [892B]
    Get:7 http://it.archive.ubuntu.com intrepid/main python2.4-dev 2.4.5-5ubuntu1 [1644kB]
    Get:8 http://it.archive.ubuntu.com intrepid/main python-all-dev 2.5.2-1ubuntu1 [910B]
    Get:9 http://it.archive.ubuntu.com intrepid/main xmlto 0.0.20-3 [35,8kB]
    Scaricato 7655kB in 1min58s (64,4kB/s)
    Selezionato il pacchetto docbook-xsl, che non lo era.
    (Lettura del database ... 203538 file e directory attualmente installati.)
    Spacchetto docbook-xsl (da .../docbook-xsl_1.73.2.dfsg.1-4_all.deb) ...
    Selezionato il pacchetto docbook-xsl-doc-html, che non lo era.
    Spacchetto docbook-xsl-doc-html (da .../docbook-xsl-doc-html_1.73.2.dfsg.1-4_all.deb) ...
    Selezionato il pacchetto libspeex-dev, che non lo era.
    Spacchetto libspeex-dev (da .../libspeex-dev_1.2~beta4-2_amd64.deb) ...
    Selezionato il pacchetto python2.4-minimal, che non lo era.
    Spacchetto python2.4-minimal (da .../python2.4-minimal_2.4.5-5ubuntu1_amd64.deb) ...
    Selezionato il pacchetto python2.4, che non lo era.
    Spacchetto python2.4 (da .../python2.4_2.4.5-5ubuntu1_amd64.deb) ...
    Selezionato il pacchetto python-all, che non lo era.
    Spacchetto python-all (da .../python-all_2.5.2-1ubuntu1_all.deb) ...
    Selezionato il pacchetto python2.4-dev, che non lo era.
    Spacchetto python2.4-dev (da .../python2.4-dev_2.4.5-5ubuntu1_amd64.deb) ...
    Selezionato il pacchetto python-all-dev, che non lo era.
    Spacchetto python-all-dev (da .../python-all-dev_2.5.2-1ubuntu1_all.deb) ...
    Selezionato il pacchetto xmlto, che non lo era.
    Spacchetto xmlto (da .../xmlto_0.0.20-3_amd64.deb) ...
    Processing triggers for doc-base ...
    Processing 1 added doc-base file(s)...
    Registering documents with scrollkeeper...
    Processing triggers for man-db ...
    Processing triggers for menu ...
    Configuro docbook-xsl (1.73.2.dfsg.1-4) ...
    
    Configuro docbook-xsl-doc-html (1.73.2.dfsg.1-4) ...
    
    Configuro libspeex-dev (1.2~beta4-2) ...
    Configuro python2.4-minimal (2.4.5-5ubuntu1) ...
    Linking and byte-compiling packages for runtime python2.4...
    
    Configuro python2.4 (2.4.5-5ubuntu1) ...
    
    Configuro python-all (2.5.2-1ubuntu1) ...
    Configuro python2.4-dev (2.4.5-5ubuntu1) ...
    Configuro python-all-dev (2.5.2-1ubuntu1) ...
    Configuro xmlto (0.0.20-3) ...
    Processing triggers for libc6 ...
    ldconfig deferred processing now taking place
    Processing triggers for menu ...
    Lettura della lista dei pacchetti in corso...
    Generazione dell'albero delle dipendenze in corso...
    Lettura informazioni sullo stato...
    libavutil-dev è già alla versione più recente.
    libasound2-dev è già alla versione più recente.
    libasound2-dev impostato per installazione manuale.
    I seguenti pacchetti erano stati automaticamente installati e non sono più richiesti:
      libmime-types-perl libnet-ssleay-perl libfile-remove-perl
      libdigest-sha1-perl bison libboost-signals1.34.1 libossp-uuid-perl
      libboost-program-options1.34.1 libmudflap0-dev libcrypt-ssleay-perl quilt
      libboost-date-time1.34.1 libestools1.2 libmime-tools-perl
      libboost-test1.34.1 libboost-iostreams1.34.1 libboost-wave1.34.1
      libboost-graph1.34.1 libfcgi-perl cdbs libaspell-dev festlex-cmu intltool
      libsoap-lite-perl fdupes festvox-kallpc16k kttsd libmikmod2
      libboost-thread1.34.1 libmudflap0 libmail-box-perl module-assistant flex
      debconf-utils kernel-package xli libboost-serialization1.34.1 libcamel1.2-13
      festival festlex-poslex libboost-regex1.34.1 libobject-realize-later-perl
      libuser-identity-perl libconvert-binhex-perl libio-socket-ssl-perl
      libossp-uuid15 libdigest-hmac-perl libboost-filesystem1.34.1
    Usare 'apt-get autoremove' per rimuoverli.
    I seguenti pacchetti verranno inoltre installati:
      libdc1394-22-dev libgsm1-dev libmpeg4ip-0 libtheora-dev libvorbis-dev
    I seguenti pacchetti NUOVI (NEW) saranno installati:
      liba52-0.7.4-dev libavcodec-dev libavformat-dev libdc1394-22-dev libgsm1-dev
      libmpeg4ip-0 libmpeg4ip-dev libtheora-dev libvorbis-dev
    0 aggiornati, 9 installati, 0 da rimuovere e 0 non aggiornati.
    È necessario prendere 4601kB di archivi. 
    Dopo quest'operazione, verranno occupati 16,6MB di spazio su disco.
    Get:1 http://it.archive.ubuntu.com intrepid/universe liba52-0.7.4-dev 0.7.4-11ubuntu1 [47,1kB]
    Get:2 http://it.archive.ubuntu.com intrepid/main libgsm1-dev 1.0.12-1 [35,1kB]
    Get:3 http://it.archive.ubuntu.com intrepid/main libtheora-dev 1.0~beta3-1 [341kB]
    Get:4 http://it.archive.ubuntu.com intrepid/main libvorbis-dev 1.2.0.dfsg-3.1 [479kB]
    Get:5 http://it.archive.ubuntu.com intrepid/main libdc1394-22-dev 2.0.2-1 [146kB]
    Get:6 http://it.archive.ubuntu.com intrepid/main libavcodec-dev 3:0.svn20080206-12ubuntu3 [2002kB]
    Get:7 http://it.archive.ubuntu.com intrepid/main libavformat-dev 3:0.svn20080206-12ubuntu3 [407kB]
    Get:8 http://it.archive.ubuntu.com intrepid/multiverse libmpeg4ip-0 1:1.6dfsg-0.2ubuntu3 [518kB]
    Get:9 http://it.archive.ubuntu.com intrepid/multiverse libmpeg4ip-dev 1:1.6dfsg-0.2ubuntu3 [625kB]
    Scaricato 4601kB in 59s (77,0kB/s)
    Selezionato il pacchetto liba52-0.7.4-dev, che non lo era.
    (Lettura del database ... 206167 file e directory attualmente installati.)
    Spacchetto liba52-0.7.4-dev (da .../liba52-0.7.4-dev_0.7.4-11ubuntu1_amd64.deb) ...
    Selezionato il pacchetto libgsm1-dev, che non lo era.
    Spacchetto libgsm1-dev (da .../libgsm1-dev_1.0.12-1_amd64.deb) ...
    Selezionato il pacchetto libtheora-dev, che non lo era.
    Spacchetto libtheora-dev (da .../libtheora-dev_1.0~beta3-1_amd64.deb) ...
    Selezionato il pacchetto libvorbis-dev, che non lo era.
    Spacchetto libvorbis-dev (da .../libvorbis-dev_1.2.0.dfsg-3.1_amd64.deb) ...
    Selezionato il pacchetto libdc1394-22-dev, che non lo era.
    Spacchetto libdc1394-22-dev (da .../libdc1394-22-dev_2.0.2-1_amd64.deb) ...
    Selezionato il pacchetto libavcodec-dev, che non lo era.
    Spacchetto libavcodec-dev (da .../libavcodec-dev_3%3a0.svn20080206-12ubuntu3_amd64.deb) ...
    Selezionato il pacchetto libavformat-dev, che non lo era.
    Spacchetto libavformat-dev (da .../libavformat-dev_3%3a0.svn20080206-12ubuntu3_amd64.deb) ...
    Selezionato il pacchetto libmpeg4ip-0, che non lo era.
    Spacchetto libmpeg4ip-0 (da .../libmpeg4ip-0_1%3a1.6dfsg-0.2ubuntu3_amd64.deb) ...
    Selezionato il pacchetto libmpeg4ip-dev, che non lo era.
    Spacchetto libmpeg4ip-dev (da .../libmpeg4ip-dev_1%3a1.6dfsg-0.2ubuntu3_amd64.deb) ...
    Processing triggers for man-db ...
    Configuro liba52-0.7.4-dev (0.7.4-11ubuntu1) ...
    Configuro libgsm1-dev (1.0.12-1) ...
    Configuro libtheora-dev (1.0~beta3-1) ...
    Configuro libvorbis-dev (1.2.0.dfsg-3.1) ...
    Configuro libdc1394-22-dev (2.0.2-1) ...
    Configuro libavcodec-dev (3:0.svn20080206-12ubuntu3) ...
    Configuro libavformat-dev (3:0.svn20080206-12ubuntu3) ...
    Configuro libmpeg4ip-0 (1:1.6dfsg-0.2ubuntu3) ...
    
    Configuro libmpeg4ip-dev (1:1.6dfsg-0.2ubuntu3) ...
    Processing triggers for libc6 ...
    ldconfig deferred processing now taking place
    
    -------------------------------------------------------------
    -  Downloading and extracting ALSA packages...
    -------------------------------------------------------------
    
    --2008-10-31 17:00:11--  ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.18.tar.bz2
               => `alsa-driver-1.0.18.tar.bz2'
    Risoluzione di ftp.alsa-project.org... 160.217.9.25
    Connessione a ftp.alsa-project.org|160.217.9.25|:21... connesso.
    Accesso come utente anonymous ... Login eseguito!
    ==> SYST ... fatto.    ==> PWD ... fatto.
    ==> TYPE I ... fatto.  ==> CWD /pub/driver ... fatto.
    ==> SIZE alsa-driver-1.0.18.tar.bz2 ... 2817277
    ==> PASV ... fatto.    ==> RETR alsa-driver-1.0.18.tar.bz2 ... fatto.
    Lunghezza: 2817277 (2,7M)
    
         0K .......... .......... .......... .......... ..........  1%  149K 18s
        50K .......... .......... .......... .......... ..........  3%  360K 13s
       100K .......... .......... .......... .......... ..........  5% 39,9K 30s
       150K .......... .......... .......... .......... ..........  7% 37,8K 39s
       200K .......... .......... .......... .......... ..........  9% 96,8K 36s
       250K .......... .......... .......... .......... .......... 10% 44,8K 38s
       300K .......... .......... .......... .......... .......... 12% 44,1K 40s
       350K .......... .......... .......... .......... .......... 14% 40,7K 41s
       400K .......... .......... .......... .......... .......... 16% 43,1K 42s
       450K .......... .......... .......... .......... .......... 18%  124K 39s
       500K .......... .......... .......... .......... .......... 19% 41,2K 39s
       550K .......... .......... .......... .......... .......... 21% 40,7K 40s
       600K .......... .......... .......... .......... .......... 23% 41,2K 40s
       650K .......... .......... .......... .......... .......... 25%  137K 37s
       700K .......... .......... .......... .......... .......... 27% 41,9K 37s
       750K .......... .......... .......... .......... .......... 29% 40,5K 37s
       800K .......... .......... .......... .......... .......... 30% 40,6K 36s
       850K .......... .......... .......... .......... .......... 32% 42,7K 36s
       900K .......... .......... .......... .......... .......... 34%  126K 34s
       950K .......... .......... .......... .......... .......... 36% 40,2K 33s
      1000K .......... .......... .......... .......... .......... 38% 40,8K 33s
      1050K .......... .......... .......... .......... .......... 39% 41,3K 32s
      1100K .......... .......... .......... .......... .......... 41%  149K 30s
      1150K .......... .......... .......... .......... .......... 43% 39,7K 30s
      1200K .......... .......... .......... .......... .......... 45% 41,3K 29s
      1250K .......... .......... .......... .......... .......... 47% 39,8K 29s
      1300K .......... .......... .......... .......... .......... 49% 41,8K 28s
      1350K .......... .......... .......... .......... .......... 50%  151K 26s
      1400K .......... .......... .......... .......... .......... 52% 39,7K 25s
      1450K .......... .......... .......... .......... .......... 54% 41,0K 25s
      1500K .......... .......... .......... .......... .......... 56% 40,7K 24s
      1550K .......... .......... .......... .......... .......... 58%  149K 22s
      1600K .......... .......... .......... .......... .......... 59% 41,1K 22s
      1650K .......... .......... .......... .......... .......... 61% 39,7K 21s
      1700K .......... .......... .......... .......... .......... 63% 41,7K 20s
      1750K .......... .......... .......... .......... .......... 65% 40,7K 19s
      1800K .......... .......... .......... .......... .......... 67%  149K 18s
      1850K .......... .......... .......... .......... .......... 69% 40,6K 17s
      1900K .......... .......... .......... .......... .......... 70% 39,6K 16s
      1950K .......... .......... .......... .......... .......... 72% 41,2K 15s
      2000K .......... .......... .......... .......... .......... 74% 43,1K 14s
      2050K .......... .......... .......... .......... .......... 76%  130K 13s
      2100K .......... .......... .......... .......... .......... 78% 39,1K 12s
      2150K .......... .......... .......... .......... .......... 79% 41,3K 11s
      2200K .......... .......... .......... .......... .......... 81% 42,3K 10s
      2250K .......... .......... .......... .......... .......... 83%  135K 9s
      2300K .......... .......... .......... .......... .......... 85% 41,6K 8s
      2350K .......... .......... .......... .......... .......... 87% 40,7K 7s
      2400K .......... .......... .......... .......... .......... 89% 41,0K 6s
      2450K .......... .......... .......... .......... .......... 90% 43,2K 5s
      2500K .......... .......... .......... .......... .......... 92%  121K 4s
      2550K .......... .......... .......... .......... .......... 94% 41,0K 3s
      2600K .......... .......... .......... .......... .......... 96% 40,4K 2s
      2650K .......... .......... .......... .......... .......... 98% 42,0K 1s
      2700K .......... .......... .......... .......... .......... 99%  153K 0s
      2750K .                                                     100%  310K=55s
    
    2008-10-31 17:01:08 (50,1 KB/s) - "alsa-driver-1.0.18.tar.bz2" salvato [2817277]
    
    --2008-10-31 17:01:09--  ftp://ftp.alsa-project.org/pub/firmware/alsa-firmware-1.0.17.tar.bz2
               => `alsa-firmware-1.0.17.tar.bz2'
    Risoluzione di ftp.alsa-project.org... 160.217.9.25
    Connessione a ftp.alsa-project.org|160.217.9.25|:21... connesso.
    Accesso come utente anonymous ... Login eseguito!
    ==> SYST ... fatto.    ==> PWD ... fatto.
    ==> TYPE I ... fatto.  ==> CWD /pub/firmware ... fatto.
    ==> SIZE alsa-firmware-1.0.17.tar.bz2 ... 3408524
    ==> PASV ... fatto.    ==> RETR alsa-firmware-1.0.17.tar.bz2 ... fatto.
    Lunghezza: 3408524 (3,2M)
    
         0K .......... .......... .......... .......... ..........  1%  129K 25s
        50K .......... .......... .......... .......... ..........  3%  327K 17s
       100K .......... .......... .......... .......... ..........  4% 43,0K 36s
       150K .......... .......... .......... .......... ..........  6% 38,1K 47s
       200K .......... .......... .......... .......... ..........  7%  152K 41s
       250K .......... .......... .......... .......... ..........  9% 43,1K 45s
       300K .......... .......... .......... .......... .......... 10% 39,1K 49s
       350K .......... .......... .......... .......... .......... 12% 41,7K 51s
       400K .......... .......... .......... .......... .......... 13% 41,0K 52s
       450K .......... .......... .......... .......... .......... 15%  102K 49s
       500K .......... .......... .......... .......... .......... 16% 42,8K 50s
       550K .......... .......... .......... .......... .......... 18% 41,8K 50s
       600K .......... .......... .......... .......... .......... 19% 41,0K 51s
       650K .......... .......... .......... .......... .......... 21%  136K 47s
       700K .......... .......... .......... .......... .......... 22% 41,7K 48s
       750K .......... .......... .......... .......... .......... 24% 40,9K 48s
       800K .......... .......... .......... .......... .......... 25% 40,7K 48s
       850K .......... .......... .......... .......... .......... 27% 43,0K 47s
       900K .......... .......... .......... .......... .......... 28%  123K 45s
       950K .......... .......... .......... .......... .......... 30% 41,0K 44s
      1000K .......... .......... .......... .......... .......... 31% 40,6K 44s
      1050K .......... .......... .......... .......... .......... 33% 41,8K 44s
      1100K .......... .......... .......... .......... .......... 34%  140K 41s
      1150K .......... .......... .......... .......... .......... 36% 39,8K 41s
      1200K .......... .......... .......... .......... .......... 37% 41,6K 40s
      1250K .......... .......... .......... .......... .......... 39% 40,1K 40s
      1300K .......... .......... .......... .......... .......... 40% 41,9K 39s
      1350K .......... .......... .......... .......... .......... 42%  136K 37s
      1400K .......... .......... .......... .......... .......... 43% 40,9K 37s
      1450K .......... .......... .......... .......... .......... 45% 41,1K 36s
      1500K .......... .......... .......... .......... .......... 46% 40,7K 35s
      1550K .......... .......... .......... .......... .......... 48%  166K 34s
      1600K .......... .......... .......... .......... .......... 49% 39,1K 33s
      1650K .......... .......... .......... .......... .......... 51% 40,4K 32s
      1700K .......... .......... .......... .......... .......... 52% 41,9K 31s
      1750K .......... .......... .......... .......... .......... 54% 41,0K 31s
      1800K .......... .......... .......... .......... .......... 55%  149K 29s
      1850K .......... .......... .......... .......... .......... 57% 40,2K 28s
      1900K .......... .......... .......... .......... .......... 58% 40,8K 27s
      1950K .......... .......... .......... .......... .......... 60% 40,9K 27s
      2000K .......... .......... .......... .......... .......... 61% 43,3K 26s
      2050K .......... .......... .......... .......... .......... 63%  134K 24s
      2100K .......... .......... .......... .......... .......... 64% 39,4K 23s
      2150K .......... .......... .......... .......... .......... 66% 40,9K 23s
      2200K .......... .......... .......... .......... .......... 67% 41,5K 22s
      2250K .......... .......... .......... .......... .......... 69%  148K 20s
      2300K .......... .......... .......... .......... .......... 70% 41,5K 20s
      2350K .......... .......... .......... .......... .......... 72% 39,7K 19s
      2400K .......... .......... .......... .......... .......... 73% 41,1K 18s
      2450K .......... .......... .......... .......... .......... 75% 43,4K 17s
      2500K .......... .......... .......... .......... .......... 76%  121K 16s
      2550K .......... .......... .......... .......... .......... 78% 38,4K 15s
      2600K .......... .......... .......... .......... .......... 79% 41,3K 14s
      2650K .......... .......... .......... .......... .......... 81% 43,1K 13s
      2700K .......... .......... .......... .......... .......... 82%  135K 12s
      2750K .......... .......... .......... .......... .......... 84% 40,9K 11s
      2800K .......... .......... .......... .......... .......... 85% 41,0K 10s
      2850K .......... .......... .......... .......... .......... 87% 40,2K 9s
      2900K .......... .......... .......... .......... .......... 88% 41,2K 8s
      2950K .......... .......... .......... .......... .......... 90%  136K 7s
      3000K .......... .......... .......... .......... .......... 91% 41,0K 6s
      3050K .......... .......... .......... .......... .......... 93% 41,1K 5s
      3100K .......... .......... .......... .......... .......... 94% 39,9K 4s
      3150K .......... .......... .......... .......... .......... 96%  155K 3s
      3200K .......... .......... .......... .......... .......... 97% 39,5K 2s
      3250K .......... .......... .......... .......... .......... 99% 41,2K 1s
      3300K .......... .......... ........                        100% 28,7K=68s
    
    2008-10-31 17:02:18 (49,2 KB/s) - "alsa-firmware-1.0.17.tar.bz2" salvato [3408524]
    
    --2008-10-31 17:02:18--  ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.18.tar.bz2
               => `alsa-lib-1.0.18.tar.bz2'
    Risoluzione di ftp.alsa-project.org... 160.217.9.25
    Connessione a ftp.alsa-project.org|160.217.9.25|:21... connesso.
    Accesso come utente anonymous ... Login eseguito!
    ==> SYST ... fatto.    ==> PWD ... fatto.
    ==> TYPE I ... fatto.  ==> CWD /pub/lib ... fatto.
    ==> SIZE alsa-lib-1.0.18.tar.bz2 ... 790052
    ==> PASV ... fatto.    ==> RETR alsa-lib-1.0.18.tar.bz2 ... fatto.
    Lunghezza: 790052 (772K)
    
         0K .......... .......... .......... .......... ..........  6%  110K 7s
        50K .......... .......... .......... .......... .......... 12%  182K 5s
       100K .......... .......... .......... .......... .......... 19% 47,0K 7s
       150K .......... .......... .......... .......... .......... 25% 41,5K 9s
       200K .......... .......... .......... .......... .......... 32%  193K 7s
       250K .......... .......... .......... .......... .......... 38% 39,9K 7s
       300K .......... .......... .......... .......... .......... 45% 37,2K 7s
       350K .......... .......... .......... .......... .......... 51% 41,2K 7s
       400K .......... .......... .......... .......... .......... 58% 41,8K 6s
       450K .......... .......... .......... .......... .......... 64% 83,0K 5s
       500K .......... .......... .......... .......... .......... 71% 47,8K 4s
       550K .......... .......... .......... .......... .......... 77% 41,7K 3s
       600K .......... .......... .......... .......... .......... 84% 40,7K 2s
       650K .......... .......... .......... .......... .......... 90%  136K 1s
       700K .......... .......... .......... .......... .......... 97% 39,3K 0s
       750K .......... .......... .                               100% 23,6K=15s
    
    2008-10-31 17:02:34 (51,8 KB/s) - "alsa-lib-1.0.18.tar.bz2" salvato [790052]
    
    --2008-10-31 17:02:34--  ftp://ftp.alsa-project.org/pub/plugins/alsa-plugins-1.0.18.tar.bz2
               => `alsa-plugins-1.0.18.tar.bz2'
    Risoluzione di ftp.alsa-project.org... 160.217.9.25
    Connessione a ftp.alsa-project.org|160.217.9.25|:21... connesso.
    Accesso come utente anonymous ... Login eseguito!
    ==> SYST ... fatto.    ==> PWD ... fatto.
    ==> TYPE I ... fatto.  ==> CWD /pub/plugins ... fatto.
    ==> SIZE alsa-plugins-1.0.18.tar.bz2 ... 312656
    ==> PASV ... fatto.    ==> RETR alsa-plugins-1.0.18.tar.bz2 ... fatto.
    Lunghezza: 312656 (305K)
    
         0K .......... .......... .......... .......... .......... 16%  116K 2s
        50K .......... .......... .......... .......... .......... 32%  143K 2s
       100K .......... .......... .......... .......... .......... 49% 50,5K 2s
       150K .......... .......... .......... .......... .......... 65% 40,6K 2s
       200K .......... .......... .......... .......... .......... 81%  185K 1s
       250K .......... .......... .......... .......... .......... 98% 38,0K 0s
       300K .....                                                 100%  208K=4,6s
    
    2008-10-31 17:02:41 (66,1 KB/s) - "alsa-plugins-1.0.18.tar.bz2" salvato [312656]
    
    alsa-plugins-1.0.18/
    alsa-plugins-1.0.18/depcomp
    alsa-plugins-1.0.18/usb_stream/
    alsa-plugins-1.0.18/usb_stream/Makefile.in
    alsa-plugins-1.0.18/usb_stream/pcm_usb_stream.c
    alsa-plugins-1.0.18/usb_stream/Makefile.am
    alsa-plugins-1.0.18/usb_stream/usb_stream.h
    alsa-plugins-1.0.18/ltconfig
    alsa-plugins-1.0.18/COPYING.GPL
    alsa-plugins-1.0.18/ltmain.sh
    alsa-plugins-1.0.18/acinclude.m4
    alsa-plugins-1.0.18/configure.in
    alsa-plugins-1.0.18/jack/
    alsa-plugins-1.0.18/jack/Makefile.in
    alsa-plugins-1.0.18/jack/pcm_jack.c
    alsa-plugins-1.0.18/jack/Makefile.am
    alsa-plugins-1.0.18/oss/
    alsa-plugins-1.0.18/oss/pcm_oss.c
    alsa-plugins-1.0.18/oss/Makefile.in
    alsa-plugins-1.0.18/oss/ctl_oss.c
    alsa-plugins-1.0.18/oss/Makefile.am
    alsa-plugins-1.0.18/pulse/
    alsa-plugins-1.0.18/pulse/pulse.c
    alsa-plugins-1.0.18/pulse/Makefile.in
    alsa-plugins-1.0.18/pulse/ctl_pulse.c
    alsa-plugins-1.0.18/pulse/conf_pulse.c
    alsa-plugins-1.0.18/pulse/pcm_pulse.c
    alsa-plugins-1.0.18/pulse/Makefile.am
    alsa-plugins-1.0.18/pulse/pulse.h
    alsa-plugins-1.0.18/maemo/
    alsa-plugins-1.0.18/maemo/types.h
    alsa-plugins-1.0.18/maemo/reporting.h
    alsa-plugins-1.0.18/maemo/dsp-protocol.c
    alsa-plugins-1.0.18/maemo/dsp-protocol.h
    alsa-plugins-1.0.18/maemo/Makefile.in
    alsa-plugins-1.0.18/maemo/Makefile.am
    alsa-plugins-1.0.18/maemo/constants.h
    alsa-plugins-1.0.18/maemo/dsp-ctl.c
    alsa-plugins-1.0.18/maemo/debug.h
    alsa-plugins-1.0.18/maemo/alsa-dsp.c
    alsa-plugins-1.0.18/maemo/list.h
    alsa-plugins-1.0.18/mix/
    alsa-plugins-1.0.18/mix/pcm_upmix.c
    alsa-plugins-1.0.18/mix/Makefile.in
    alsa-plugins-1.0.18/mix/Makefile.am
    alsa-plugins-1.0.18/mix/pcm_vdownmix.c
    alsa-plugins-1.0.18/configure
    alsa-plugins-1.0.18/Makefile.in
    alsa-plugins-1.0.18/rate-lavc/
    alsa-plugins-1.0.18/rate-lavc/gcd.h
    alsa-plugins-1.0.18/rate-lavc/Makefile.in
    alsa-plugins-1.0.18/rate-lavc/rate_lavcrate.c
    alsa-plugins-1.0.18/rate-lavc/Makefile.am
    alsa-plugins-1.0.18/version
    alsa-plugins-1.0.18/rate/
    alsa-plugins-1.0.18/rate/Makefile.in
    alsa-plugins-1.0.18/rate/Makefile.am
    alsa-plugins-1.0.18/rate/rate_samplerate.c
    alsa-plugins-1.0.18/doc/
    alsa-plugins-1.0.18/doc/lavcrate.txt
    alsa-plugins-1.0.18/doc/upmix.txt
    alsa-plugins-1.0.18/doc/README-jack
    alsa-plugins-1.0.18/doc/speexrate.txt
    alsa-plugins-1.0.18/doc/a52.txt
    alsa-plugins-1.0.18/doc/Makefile.in
    alsa-plugins-1.0.18/doc/README-pcm-oss
    alsa-plugins-1.0.18/doc/README-pulse
    alsa-plugins-1.0.18/doc/README-maemo
    alsa-plugins-1.0.18/doc/samplerate.txt
    alsa-plugins-1.0.18/doc/Makefile.am
    alsa-plugins-1.0.18/doc/vdownmix.txt
    alsa-plugins-1.0.18/config.guess
    alsa-plugins-1.0.18/gitcompile
    alsa-plugins-1.0.18/Makefile.am
    alsa-plugins-1.0.18/a52/
    alsa-plugins-1.0.18/a52/Makefile.in
    alsa-plugins-1.0.18/a52/Makefile.am
    alsa-plugins-1.0.18/a52/pcm_a52.c
    alsa-plugins-1.0.18/config.h.in
    alsa-plugins-1.0.18/aclocal.m4
    alsa-plugins-1.0.18/COPYING
    alsa-plugins-1.0.18/missing
    alsa-plugins-1.0.18/install-sh
    alsa-plugins-1.0.18/pph/
    alsa-plugins-1.0.18/pph/Makefile.in
    alsa-plugins-1.0.18/pph/fixed_generic.h
    alsa-plugins-1.0.18/pph/speex_resampler.h
    alsa-plugins-1.0.18/pph/Makefile.am
    alsa-plugins-1.0.18/pph/rate_speexrate.c
    alsa-plugins-1.0.18/pph/arch.h
    alsa-plugins-1.0.18/pph/resample.c
    alsa-plugins-1.0.18/config.sub
    --2008-10-31 17:02:41--  ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.18.tar.bz2
               => `alsa-utils-1.0.18.tar.bz2'
    Risoluzione di ftp.alsa-project.org... 160.217.9.25
    Connessione a ftp.alsa-project.org|160.217.9.25|:21... connesso.
    Accesso come utente anonymous ... Login eseguito!
    ==> SYST ... fatto.    ==> PWD ... fatto.
    ==> TYPE I ... fatto.  ==> CWD /pub/utils ... fatto.
    ==> SIZE alsa-utils-1.0.18.tar.bz2 ... 1039779
    ==> PASV ... fatto.    ==> RETR alsa-utils-1.0.18.tar.bz2 ... fatto.
    Lunghezza: 1039779 (1015K)
    
         0K .......... .......... .......... .......... ..........  4%  120K 8s
        50K .......... .......... .......... .......... ..........  9%  175K 6s
       100K .......... .......... .......... .......... .......... 14% 47,3K 10s
       150K .......... .......... .......... .......... .......... 19% 40,6K 12s
       200K .......... .......... .......... .......... .......... 24%  169K 10s
       250K .......... .......... .......... .......... .......... 29% 39,5K 11s
       300K .......... .......... .......... .......... .......... 34% 40,6K 11s
       350K .......... .......... .......... .......... .......... 39% 39,6K 11s
       400K .......... .......... .......... .......... .......... 44% 42,1K 10s
       450K .......... .......... .......... .......... .......... 49%  127K 9s
       500K .......... .......... .......... .......... .......... 54% 42,4K 8s
       550K .......... .......... .......... .......... .......... 59% 41,1K 8s
       600K .......... .......... .......... .......... .......... 64% 40,1K 7s
       650K .......... .......... .......... .......... .......... 68%  222K 6s
       700K .......... .......... .......... .......... .......... 73% 40,2K 5s
       750K .......... .......... .......... .......... .......... 78% 37,6K 4s
       800K .......... .......... .......... .......... .......... 83% 41,4K 3s
       850K .......... .......... .......... .......... .......... 88% 41,4K 2s
       900K .......... .......... .......... .......... .......... 93%  165K 1s
       950K .......... .......... .......... .......... .......... 98% 39,9K 0s
      1000K .......... .....                                      100%  188K=19s
    
    2008-10-31 17:03:02 (53,1 KB/s) - "alsa-utils-1.0.18.tar.bz2" salvato [1039779]
    
    --2008-10-31 17:03:02--  ftp://ftp.alsa-project.org/pub/tools/alsa-tools-1.0.18.tar.bz2
               => `alsa-tools-1.0.18.tar.bz2'
    Risoluzione di ftp.alsa-project.org... 160.217.9.25
    Connessione a ftp.alsa-project.org|160.217.9.25|:21... connesso.
    Accesso come utente anonymous ... Login eseguito!
    ==> SYST ... fatto.    ==> PWD ... fatto.
    ==> TYPE I ... fatto.  ==> CWD /pub/tools ... fatto.
    ==> SIZE alsa-tools-1.0.18.tar.bz2 ... 1556113
    ==> PASV ... fatto.    ==> RETR alsa-tools-1.0.18.tar.bz2 ... fatto.
    Lunghezza: 1556113 (1,5M)
    
         0K .......... .......... .......... .......... ..........  3%  112K 13s
        50K .......... .......... .......... .......... ..........  6%  181K 10s
       100K .......... .......... .......... .......... ..........  9% 50,9K 16s
       150K .......... .......... .......... .......... .......... 13% 39,4K 20s
       200K .......... .......... .......... .......... .......... 16%  148K 17s
       250K .......... .......... .......... .......... .......... 19% 40,9K 18s
       300K .......... .......... .......... .......... .......... 23% 40,1K 19s
       350K .......... .......... .......... .......... .......... 26% 41,1K 20s
       400K .......... .......... .......... .......... .......... 29% 40,8K 20s
       450K .......... .......... .......... .......... .......... 32%  150K 17s
       500K .......... .......... .......... .......... .......... 36% 40,0K 17s
       550K .......... .......... .......... .......... .......... 39% 42,0K 17s
       600K .......... .......... .......... .......... .......... 42% 39,2K 16s
       650K .......... .......... .......... .......... .......... 46%  159K 15s
       700K .......... .......... .......... .......... .......... 49% 42,2K 14s
       750K .......... .......... .......... .......... .......... 52% 40,3K 13s
       800K .......... .......... .......... .......... .......... 55% 40,2K 13s
       850K .......... .......... .......... .......... .......... 59% 41,6K 12s
       900K .......... .......... .......... .......... .......... 62%  146K 11s
       950K .......... .......... .......... .......... .......... 65% 40,8K 10s
      1000K .......... .......... .......... .......... .......... 69% 39,9K 9s
      1050K .......... .......... .......... .......... .......... 72% 40,7K 8s
      1100K .......... .......... .......... .......... .......... 75%  186K 7s
      1150K .......... .......... .......... .......... .......... 78% 40,6K 6s
      1200K .......... .......... .......... .......... .......... 82% 40,2K 5s
      1250K .......... .......... .......... .......... .......... 85% 39,7K 4s
      1300K .......... .......... .......... .......... .......... 88% 41,0K 3s
      1350K .......... .......... .......... .......... .......... 92%  151K 2s
      1400K .......... .......... .......... .......... .......... 95% 41,5K 1s
      1450K .......... .......... .......... .......... .......... 98% 40,4K 0s
      1500K .......... .........                                  100%  153K=30s
    
    2008-10-31 17:03:33 (51,3 KB/s) - "alsa-tools-1.0.18.tar.bz2" salvato [1556113]
    
    --2008-10-31 17:03:34--  ftp://ftp.alsa-project.org/pub/oss-lib/alsa-oss-1.0.17.tar.bz2
               => `alsa-oss-1.0.17.tar.bz2'
    Risoluzione di ftp.alsa-project.org... 160.217.9.25
    Connessione a ftp.alsa-project.org|160.217.9.25|:21... connesso.
    Accesso come utente anonymous ... Login eseguito!
    ==> SYST ... fatto.    ==> PWD ... fatto.
    ==> TYPE I ... fatto.  ==> CWD /pub/oss-lib ... fatto.
    ==> SIZE alsa-oss-1.0.17.tar.bz2 ... 248726
    ==> PASV ... fatto.    ==> RETR alsa-oss-1.0.17.tar.bz2 ... fatto.
    Lunghezza: 248726 (243K)
    
         0K .......... .......... .......... .......... .......... 20%  128K 2s
        50K .......... .......... .......... .......... .......... 41%  197K 1s
       100K .......... .......... .......... .......... .......... 61% 45,0K 1s
       150K .......... .......... .......... .......... .......... 82% 40,9K 1s
       200K .......... .......... .......... .......... ..        100%  169K=3,2s
    
    2008-10-31 17:03:39 (75,2 KB/s) - "alsa-oss-1.0.17.tar.bz2" salvato [248726]
    
    alsa-oss-1.0.17/
    alsa-oss-1.0.17/depcomp
    alsa-oss-1.0.17/compile
    alsa-oss-1.0.17/ltmain.sh
    alsa-oss-1.0.17/configure.in
    alsa-oss-1.0.17/oss-redir/
    alsa-oss-1.0.17/oss-redir/Makefile.in
    alsa-oss-1.0.17/oss-redir/oss-redir.h
    alsa-oss-1.0.17/oss-redir/README
    alsa-oss-1.0.17/oss-redir/Makefile.am
    alsa-oss-1.0.17/oss-redir/oss-redir.c
    alsa-oss-1.0.17/configure
    alsa-oss-1.0.17/Makefile.in
    alsa-oss-1.0.17/test/
    alsa-oss-1.0.17/test/Makefile.in
    alsa-oss-1.0.17/test/testaoss.in
    alsa-oss-1.0.17/test/osstest.c
    alsa-oss-1.0.17/test/lmixer.cc
    alsa-oss-1.0.17/test/mixctl.h
    alsa-oss-1.0.17/test/Makefile.am
    alsa-oss-1.0.17/config.guess
    alsa-oss-1.0.17/alsa/
    alsa-oss-1.0.17/alsa/alsa-local.h
    alsa-oss-1.0.17/alsa/pcm.c
    alsa-oss-1.0.17/alsa/Makefile.in
    alsa-oss-1.0.17/alsa/testaoss.in
    alsa-oss-1.0.17/alsa/mixer.c
    alsa-oss-1.0.17/alsa/aoss.in
    alsa-oss-1.0.17/alsa/alsa-oss-emul.h
    alsa-oss-1.0.17/alsa/Makefile.am
    alsa-oss-1.0.17/alsa/aoss.1
    alsa-oss-1.0.17/alsa/aoss.old.in
    alsa-oss-1.0.17/alsa/stdioemu.c
    alsa-oss-1.0.17/alsa/alsa-oss.c
    alsa-oss-1.0.17/Makefile.am
    alsa-oss-1.0.17/aclocal.m4
    alsa-oss-1.0.17/COPYING
    alsa-oss-1.0.17/missing
    alsa-oss-1.0.17/install-sh
    alsa-oss-1.0.17/config.sub
    
    -------------------------------------------------------------
    -  Prepare for compilation and installation...
    -------------------------------------------------------------
    
    
    -------------------------------------------------------------
    -  Compiling drivers...
    -------------------------------------------------------------
    
    rm -f .depend *.o snd.map*
    rm -f /*.ver
    rm -f modules/*.o modules/*.ko
    make[1]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore'
    Makefile:6: /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/Makefile.conf: Nessun file o directory
    /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/Rules.make:75: /Rules.make1: Nessun file o directory
    make[1]: *** No rule to make target `/Rules.make1'.  Stop.
    make[1]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore'
    make: *** [clean] Error 1
    checking for gcc... gcc
    checking for C compiler default output file name... a.out
    checking whether the C compiler works... yes
    checking whether we are cross compiling... no
    checking for suffix of executables... 
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ISO C89... none needed
    checking for ranlib... ranlib
    checking for a BSD-compatible install... /usr/bin/install -c
    checking how to run the C preprocessor... gcc -E
    checking for grep that handles long lines and -e... /bin/grep
    checking for egrep... /bin/grep -E
    checking for ANSI C header files... yes
    checking for an ANSI C-conforming const... yes
    checking for inline... inline
    checking whether time.h and sys/time.h may both be included... yes
    checking whether gcc needs -traditional... no
    checking for current directory... /usr/src/Alsa-1.0.18/alsa-driver-1.0.18
    checking cross compile... 
    checking for directory with kernel source... /lib/modules/2.6.27-7-generic/build
    checking for directory with kernel build... 
    checking for kernel linux/version.h... yes
    checking for kernel linux/autoconf.h... yes
    checking for kernel version... 2.6.27-7-generic
    checking for GCC version... ./configure: eval: line 5117: syntax error near unexpected token `)'
    ./configure: eval: line 5117: `my_compiler_version=4.3.2-1ubuntu11)'
    Kernel compiler:  Used compiler: gcc (Ubuntu 4.3.2-1ubuntu11) 4.3.2
    
    *** NO PREDEFINED KERNEL COMPILER IS DETECTED
    *** Assuming the same compiler is used with the current system compiler.
    
    *** Please make sure that the same compiler version was used for building kernel.
    
    checking for built-in ALSA... no
    checking for existing ALSA module... yes
    checking for Red Hat kernel... auto
    checking for Red Hat kernel... no
    checking for SUSE kernel... auto
    checking for SUSE kernel... no
    checking for updating alsa-kernel version.h... yes
    checking for CONFIG_EXPERIMENTAL... yes
    checking for kernel linux/config.h... yes
    checking for deprecated linux/config.h... checking to modify of kernel linux/kmod.h... no
    checking for kernel linux/utsrelease.h... yes
    checking for kernel linux/compiler.h... yes
    checking for kernel linux/pm.h... yes
    checking for kernel linux/spinlock.h... yes
    checking for kernel linux/irq.h... yes
    checking for kernel linux/threads.h... yes
    checking for kernel linux/rwsem.h... yes
    checking for kernel linux/gameport.h... yes
    checking for kernel media/v4l2-dev.h... yes
    checking for kernel linux/devfs_fs_kernel.h... no
    Creating a dummy <linux/devfs_fs_kernel.h>...
    checking for kernel linux/highmem.h... yes
    checking for kernel linux/workqueue.h... yes
    checking for kernel linux/dma-mapping.h... yes
    checking for kernel asm/hw_irq.h... yes
    checking for kernel linux/device.h... yes
    checking for kernel linux/platform_device.h... yes
    checking for kernel linux/isa.h... yes
    checking for kernel linux/jiffies.h... yes
    checking for kernel linux/compat.h... yes
    checking for kernel linux/log2.h... yes
    checking for kernel linux/adb.h... yes
    checking for kernel linux/cuda.h... yes
    checking for kernel linux/pmu.h... yes
    checking for kernel linux/io.h... yes
    checking for kernel linux/moduleparam.h... yes
    checking for kernel linux/syscalls.h... yes
    checking for kernel linux/firmware.h... yes
    checking for kernel linux/err.h... yes
    checking for kernel linux/bitmap.h... yes
    checking for kernel linux/mutex.h... yes
    checking for kernel linux/pm_qos_params.h... yes
    checking for kernel linux/kthread.h... yes
    checking for kernel asm/irq_regs.h... yes
    checking for kernel linux/seq_file.h... yes
    checking for kernel linux/debugfs.h... yes
    checking for kernel module symbol versions... yes
    checking for has ioport support... yes
    checking for PCI support in kernel... yes
    checking for I2C driver in kernel... module
    checking for I2C_POWERMAC in kernel... unknown
    checking for firmware loader... yes
    checking for input subsystem in kernel... yes
    checking for pc-speaker input subsystem in kernel... module
    checking for directory to store kernel modules... /lib/modules/2.6.27-7-generic/kernel/sound
    checking for verbose procfs... on
    checking for verbose printk... on
    checking for debug level... none
    checking for ISA support in kernel... no
    checking for processor type... x86_64
    checking for i386 machine type... default
    checking for i386 machine type... default
    checking for ISA DMA API... yes
    checking for 32bit compat support... yes
    checking for SMP... yes
    checking for Video device support in kernel... yes
    checking for ISA PnP driver in kernel... yes
    checking for PnP driver in kernel... yes
    checking for Kernel ISA-PnP support... no
    checking for Kernel ISA-PnP module support... no
    checking for strlcpy... no
    checking for snprintf... no
    checking for vsnprintf... no
    checking for scnprintf... no
    checking for sscanf... no
    checking for vmalloc_to_page... no
    checking for old kmod... yes
    checking for PDE... no
    checking for pci_set_consistent_dma_mask... no
    checking for pci_dev_present... no
    checking for msleep... no
    checking for msecs_to_jiffies... no
    checking for tty->count is the atomic type... no
    checking for video_get_drvdata... no
    checking for V4L1 layer... yes
    checking for io_remap_pfn_range... no
    checking for new io_remap_page_range... no
    checking for kcalloc... no
    checking for kstrdup... yes
    checking for kstrndup... yes
    checking for kzalloc... no
    checking for create_workqueue with flags... no
    checking for pci_ioremap_bar... no
    checking for saved_config_space in pci_dev... no
    checking for register_sound_special_device... no
    checking for driver extra-version... 
    checking for driver version... 1.0.18
    checking for dynamic minor numbers... no
    checking for sequencer support... yes
    checking for OSS/Free emulation... yes
    checking for OSS PCM plugin system inclusion... yes
    checking for RTC support... no
    checking for HPET support... yes
    checking for Procfs support... yes
    checking for USB support... yes
    checking for class_simple... no
    checking for old driver suspend/resume callbacks... no
    checking for removal of page-reservation for nopage/mmap... no
    checking for nested class_device... no
    checking for new IRQ handler... no
    checking for gfp_t... no
    checking for GFP_DMA32... no
    checking for page_to_pfn... no
    checking for PnP suspend/resume... no
    checking for device_create_drvdata... no
    checking for new unlocked/compat_ioctl... no
    checking for x86-compatible PC... yes
    checking for High-Res timers... yes
    checking for kernel PCMCIA
    checking for PCMCIA support... yes
    checking for PC9800 support in kernel... no
    checking for parallel port support... yes
    checking for power management... yes
    checking for CONFIG_HAS_DMA... yes
    checking for cards to compile driver for... all
    checking for additonal options to compile driver for... all
    configure: creating ./config.status
    config.status: creating version
    config.status: creating Makefile.conf
    config.status: WARNING:  Makefile.conf.in seems to ignore the --datarootdir setting
    config.status: creating snddevices
    config.status: creating utils/alsa-driver.spec
    config.status: creating utils/buildrpm
    config.status: creating toplevel.config
    config.status: creating utils/alsasound
    config.status: creating utils/alsasound.posix
    config.status: creating include/pci_ids_compat.h
    config.status: creating include/i2c-id_compat.h
    config.status: creating include/config.h
    config.status: creating include/config1.h
    config.status: creating include/version.h
    config.status: include/version.h is unchanged
    config.status: creating include/autoconf-extra.h
    Hacking autoconf.h...
    if [ ! -d include/sound -a ! -L include/sound ]; then \
    	  ln -sf ../alsa-kernel/include include/sound ; \
    	fi
    cp -puvf include/version.h include/sound/version.h
    make dep
    make[1]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18'
    make[2]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore'
    copying file alsa-kernel/core/info.c
    patching file info.c
    copying file alsa-kernel/core/pcm.c
    patching file pcm.c
    Hunk #2 succeeded at 924 (offset 14 lines).
    Hunk #3 succeeded at 940 (offset 14 lines).
    Hunk #4 succeeded at 952 (offset 14 lines).
    Hunk #5 succeeded at 1007 (offset 15 lines).
    copying file alsa-kernel/core/pcm_native.c
    patching file pcm_native.c
    Hunk #4 succeeded at 1564 (offset -15 lines).
    Hunk #5 succeeded at 2813 (offset -15 lines).
    Hunk #6 succeeded at 2866 (offset -15 lines).
    Hunk #7 succeeded at 2894 (offset -15 lines).
    Hunk #8 succeeded at 2910 (offset -15 lines).
    Hunk #9 succeeded at 2936 (offset -15 lines).
    Hunk #10 succeeded at 3024 (offset -15 lines).
    Hunk #11 succeeded at 3043 (offset -15 lines).
    Hunk #12 succeeded at 3057 (offset -15 lines).
    Hunk #13 succeeded at 3114 (offset -15 lines).
    Hunk #14 succeeded at 3142 (offset -15 lines).
    Hunk #15 succeeded at 3199 (offset -15 lines).
    Hunk #16 succeeded at 3228 (offset -15 lines).
    Hunk #17 succeeded at 3258 (offset -15 lines).
    Hunk #18 succeeded at 3336 (offset -15 lines).
    Hunk #19 succeeded at 3368 (offset -15 lines).
    Hunk #20 succeeded at 3433 (offset -15 lines).
    Hunk #21 succeeded at 3463 (offset -15 lines).
    Hunk #22 succeeded at 3507 (offset -15 lines).
    Hunk #23 succeeded at 3668 (offset -15 lines).
    copying file alsa-kernel/core/control.c
    patching file control.c
    copying file alsa-kernel/core/hwdep.c
    patching file hwdep.c
    copying file alsa-kernel/core/init.c
    patching file init.c
    copying file alsa-kernel/core/rawmidi.c
    patching file rawmidi.c
    Hunk #3 succeeded at 1293 (offset 4 lines).
    Hunk #4 succeeded at 1377 (offset 4 lines).
    copying file alsa-kernel/core/sound.c
    patching file sound.c
    copying file alsa-kernel/core/timer.c
    patching file timer.c
    Hunk #3 succeeded at 997 (offset 5 lines).
    Hunk #4 succeeded at 1919 (offset 5 lines).
    Hunk #5 succeeded at 1964 (offset 5 lines).
    copying file alsa-kernel/core/memalloc.c
    patching file memalloc.c
    Hunk #2 succeeded at 58 (offset -11 lines).
    Hunk #3 succeeded at 207 (offset -11 lines).
    Hunk #4 succeeded at 245 (offset -11 lines).
    Hunk #5 succeeded at 267 (offset -11 lines).
    Hunk #6 succeeded at 293 (offset -11 lines).
    Hunk #7 succeeded at 311 (offset -11 lines).
    Hunk #8 succeeded at 519 (offset -49 lines).
    Hunk #9 succeeded at 658 (offset -49 lines).
    Hunk #10 succeeded at 668 (offset -49 lines).
    Hunk #11 succeeded at 707 (offset -49 lines).
    copying file alsa-kernel/core/misc.c
    patching file misc.c
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/ioctl32'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/ioctl32'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/oss'
    copying file alsa-kernel/core/oss/mixer_oss.c
    patching file mixer_oss.c
    Hunk #3 succeeded at 383 (offset 4 lines).
    copying file alsa-kernel/core/oss/pcm_oss.c
    patching file pcm_oss.c
    Hunk #3 succeeded at 2607 (offset 17 lines).
    Hunk #4 succeeded at 2658 (offset 17 lines).
    Hunk #5 succeeded at 2781 (offset 17 lines).
    Hunk #6 succeeded at 2964 (offset 17 lines).
    Hunk #7 succeeded at 3091 (offset 17 lines).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/oss'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/seq'
    copying file alsa-kernel/core/seq/seq.c
    patching file seq.c
    copying file alsa-kernel/core/seq/seq_clientmgr.c
    patching file seq_clientmgr.c
    Hunk #3 succeeded at 2209 (offset 6 lines).
    Hunk #4 succeeded at 2561 (offset 10 lines).
    copying file alsa-kernel/core/seq/seq_memory.c
    patching file seq_memory.c
    Hunk #3 succeeded at 250 (offset 2 lines).
    make[4]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/seq/oss'
    copying file alsa-kernel/core/seq/oss/seq_oss.c
    patching file seq_oss.c
    Hunk #3 succeeded at 192 (offset 3 lines).
    Hunk #4 succeeded at 227 (offset 4 lines).
    Hunk #5 succeeded at 330 (offset 4 lines).
    make[4]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/seq/oss'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/seq'
    make[2]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore'
    make[2]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/i2c'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/i2c/l3'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/i2c/l3'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/i2c/other'
    copying file alsa-kernel/i2c/other/tea575x-tuner.c
    patching file tea575x-tuner.c
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/i2c/other'
    make[2]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/i2c'
    make[2]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers'
    copying file alsa-kernel/drivers/mts64.c
    patching file mts64.c
    copying file alsa-kernel/drivers/portman2x4.c
    patching file portman2x4.c
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers/mpu401'
    copying file alsa-kernel/drivers/mpu401/mpu401.c
    patching file mpu401.c
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers/mpu401'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers/opl3'
    copying file alsa-kernel/drivers/opl3/opl3_lib.c
    patching file opl3_lib.c
    Hunk #2 succeeded at 438 (offset 2 lines).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers/opl3'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers/opl4'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers/opl4'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers/pcsp'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers/pcsp'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers/vx'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers/vx'
    make[2]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/drivers'
    make[2]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/ad1816a'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/ad1816a'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/ad1848'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/ad1848'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/cs423x'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/cs423x'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/es1688'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/es1688'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/gus'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/gus'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/msnd'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/msnd'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/opti9xx'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/opti9xx'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/sb'
    copying file alsa-kernel/isa/sb/sb16_csp.c
    patching file sb16_csp.c
    Hunk #2 succeeded at 711 (offset 1 line).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/sb'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/wavefront'
    copying file alsa-kernel/isa/wavefront/wavefront_fx.c
    patching file wavefront_fx.c
    copying file alsa-kernel/isa/wavefront/wavefront_synth.c
    patching file wavefront_synth.c
    Hunk #2 succeeded at 1947 (offset 1 line).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/wavefront'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/wss'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa/wss'
    make[2]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/isa'
    make[2]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/synth'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/synth/emux'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/synth/emux'
    make[2]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/synth'
    make[2]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci'
    copying file alsa-kernel/pci/ad1889.c
    patching file ad1889.c
    copying file alsa-kernel/pci/atiixp.c
    patching file atiixp.c
    Hunk #2 succeeded at 1673 (offset 2 lines).
    Hunk #3 succeeded at 1718 (offset 2 lines).
    copying file alsa-kernel/pci/atiixp_modem.c
    patching file atiixp_modem.c
    Hunk #2 succeeded at 1313 (offset 6 lines).
    Hunk #3 succeeded at 1356 (offset 6 lines).
    copying file alsa-kernel/pci/bt87x.c
    patching file bt87x.c
    Hunk #2 succeeded at 844 (offset -2 lines).
    Hunk #3 succeeded at 998 (offset -2 lines).
    copying file alsa-kernel/pci/cmipci.c
    patching file cmipci.c
    Hunk #2 succeeded at 3134 (offset -42 lines).
    Hunk #3 succeeded at 3429 (offset -42 lines).
    copying file alsa-kernel/pci/ens1370.c
    patching file ens1370.c
    Hunk #2 succeeded at 2120 (offset -11 lines).
    Hunk #3 succeeded at 2496 (offset -11 lines).
    copying file alsa-kernel/pci/fm801.c
    patching file fm801.c
    Hunk #2 succeeded at 1426 (offset 23 lines).
    Hunk #3 succeeded at 1607 (offset 23 lines).
    copying file alsa-kernel/pci/intel8x0.c
    patching file intel8x0.c
    Hunk #3 succeeded at 712 (offset 6 lines).
    Hunk #4 succeeded at 722 (offset 6 lines).
    Hunk #5 succeeded at 3173 (offset 45 lines).
    copying file alsa-kernel/pci/maestro3.c
    patching file maestro3.c
    copying file alsa-kernel/pci/via82xx.c
    patching file via82xx.c
    Hunk #2 succeeded at 2433 (offset -3 lines).
    Hunk #3 succeeded at 2443 (offset -3 lines).
    Hunk #4 succeeded at 2458 (offset -3 lines).
    Hunk #5 succeeded at 2469 (offset -3 lines).
    Hunk #6 succeeded at 2480 (offset -3 lines).
    Hunk #7 succeeded at 2563 (offset -3 lines).
    copying file alsa-kernel/pci/via82xx_modem.c
    patching file via82xx_modem.c
    Hunk #2 succeeded at 1184 (offset 4 lines).
    Hunk #3 succeeded at 1244 (offset 4 lines).
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/ac97'
    copying file alsa-kernel/pci/ac97/ac97_codec.c
    patching file ac97_codec.c
    Hunk #3 succeeded at 1914 (offset 3 lines).
    Hunk #4 succeeded at 1926 (offset 3 lines).
    Hunk #5 succeeded at 1950 (offset 3 lines).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/ac97'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/ali5451'
    copying file alsa-kernel/pci/ali5451/ali5451.c
    patching file ali5451.c
    Hunk #2 succeeded at 2207 (offset 2 lines).
    Hunk #3 succeeded at 2377 (offset 2 lines).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/ali5451'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/asihpi'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/asihpi'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/au88x0'
    copying file alsa-kernel/pci/au88x0/au88x0.c
    patching file au88x0.c
    Hunk #2 succeeded at 339 (offset -2 lines).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/au88x0'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/aw2'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/aw2'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/ca0106'
    copying file alsa-kernel/pci/ca0106/ca0106_main.c
    patching file ca0106_main.c
    Hunk #3 succeeded at 1365 (offset 12 lines).
    Hunk #4 succeeded at 1734 (offset 12 lines).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/ca0106'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/cs46xx'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/cs46xx'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/cs5535audio'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/cs5535audio'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/echoaudio'
    copying file alsa-kernel/pci/echoaudio/echoaudio.c
    patching file echoaudio.c
    Hunk #1 succeeded at 1894 (offset -32 lines).
    Hunk #2 succeeded at 1957 (offset -32 lines).
    copying file alsa-kernel/pci/echoaudio/darla20.c
    patching file darla20.c
    copying file alsa-kernel/pci/echoaudio/darla24.c
    patching file darla24.c
    copying file alsa-kernel/pci/echoaudio/echo3g.c
    patching file echo3g.c
    copying file alsa-kernel/pci/echoaudio/gina20.c
    patching file gina20.c
    copying file alsa-kernel/pci/echoaudio/gina24.c
    patching file gina24.c
    copying file alsa-kernel/pci/echoaudio/indigo.c
    patching file indigo.c
    copying file alsa-kernel/pci/echoaudio/indigodj.c
    patching file indigodj.c
    copying file alsa-kernel/pci/echoaudio/indigoio.c
    patching file indigoio.c
    copying file alsa-kernel/pci/echoaudio/layla20.c
    patching file layla20.c
    copying file alsa-kernel/pci/echoaudio/layla24.c
    patching file layla24.c
    copying file alsa-kernel/pci/echoaudio/mia.c
    patching file mia.c
    copying file alsa-kernel/pci/echoaudio/mona.c
    patching file mona.c
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/echoaudio'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/emu10k1'
    copying file alsa-kernel/pci/emu10k1/emu10k1_main.c
    patching file emu10k1_main.c
    copying file alsa-kernel/pci/emu10k1/emu10k1x.c
    patching file emu10k1x.c
    Hunk #2 succeeded at 942 (offset 2 lines).
    Hunk #3 succeeded at 1636 (offset 8 lines).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/emu10k1'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/hda'
    copying file alsa-kernel/pci/hda/hda_codec.c
    patching file hda_codec.c
    Hunk #2 succeeded at 359 (offset 80 lines).
    Hunk #3 succeeded at 397 with fuzz 2 (offset 80 lines).
    Hunk #4 succeeded at 412 (offset 80 lines).
    Hunk #5 succeeded at 428 (offset 80 lines).
    copying file alsa-kernel/pci/hda/hda_beep.c
    patching file hda_beep.c
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/hda'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/ice1712'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/ice1712'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/korg1212'
    copying file alsa-kernel/pci/korg1212/korg1212.c
    patching file korg1212.c
    Hunk #2 succeeded at 2342 (offset 3 lines).
    Hunk #3 succeeded at 2498 (offset 3 lines).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/korg1212'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/mixart'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/mixart'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/nm256'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/nm256'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/oxygen'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/oxygen'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/pcxhr'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/pcxhr'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/pdplus'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/pdplus'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/riptide'
    copying file alsa-kernel/pci/riptide/riptide.c
    patching file riptide.c
    Hunk #2 succeeded at 1280 (offset 1 line).
    Hunk #3 succeeded at 2243 (offset 9 lines).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/riptide'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/rme9652'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/rme9652'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/trident'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/trident'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/vx222'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/vx222'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/ymfpci'
    copying file alsa-kernel/pci/ymfpci/ymfpci_main.c
    patching file ymfpci_main.c
    Hunk #2 succeeded at 2006 with fuzz 2 (offset -38 lines).
    Hunk #3 succeeded at 2026 with fuzz 2 (offset -40 lines).
    Hunk #4 succeeded at 2366 (offset -40 lines).
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci/ymfpci'
    make[2]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pci'
    make[2]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa/codecs'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa/codecs'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa/core'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa/core'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa/fabrics'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa/fabrics'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa/soundbus'
    make[4]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa/soundbus/i2sbus'
    make[4]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa/soundbus/i2sbus'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa/soundbus'
    make[2]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/aoa'
    make[2]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/at32'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/at32'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/at91'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/at91'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/au1x'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/au1x'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/blackfin'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/blackfin'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/codecs'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/codecs'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/davinci'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/davinci'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/fsl'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/fsl'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/omap'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/omap'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/pxa'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/pxa'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/s3c24xx'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/s3c24xx'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/sh'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc/sh'
    make[2]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/soc'
    make[2]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/usb'
    copying file alsa-kernel/usb/usbaudio.c
    patching file usbaudio.c
    Hunk #2 succeeded at 70 with fuzz 2.
    Hunk #3 succeeded at 689 (offset 30 lines).
    Hunk #4 succeeded at 716 (offset 30 lines).
    Hunk #5 succeeded at 797 with fuzz 2 (offset 30 lines).
    Hunk #6 succeeded at 812 with fuzz 2 (offset 30 lines).
    Hunk #7 succeeded at 1188 with fuzz 1 (offset 28 lines).
    Hunk #8 succeeded at 2119 (offset 37 lines).
    Hunk #9 succeeded at 2138 (offset 37 lines).
    Hunk #10 succeeded at 2150 (offset 37 lines).
    Hunk #11 succeeded at 2163 (offset 37 lines).
    Hunk #12 succeeded at 2744 (offset 57 lines).
    Hunk #13 succeeded at 2816 (offset 57 lines).
    Hunk #14 succeeded at 3104 (offset 57 lines).
    Hunk #15 succeeded at 3175 (offset 57 lines).
    Hunk #16 succeeded at 3296 (offset 57 lines).
    Hunk #17 succeeded at 3314 (offset 57 lines).
    Hunk #18 succeeded at 3328 (offset 57 lines).
    Hunk #19 succeeded at 3341 (offset 57 lines).
    Hunk #20 succeeded at 3544 (offset 56 lines).
    Hunk #21 succeeded at 3637 (offset 56 lines).
    Hunk #22 succeeded at 3775 (offset 57 lines).
    Hunk #23 succeeded at 3836 (offset 57 lines).
    Hunk #24 succeeded at 3855 (offset 57 lines).
    copying file alsa-kernel/usb/usbmidi.c
    patching file usbmidi.c
    Hunk #2 succeeded at 227 (offset 2 lines).
    Hunk #3 succeeded at 251 (offset 2 lines).
    Hunk #4 succeeded at 350 (offset 8 lines).
    Hunk #5 succeeded at 1510 (offset 148 lines).
    Hunk #6 succeeded at 1862 (offset 156 lines).
    copying file alsa-kernel/usb/usbmixer.c
    patching file usbmixer.c
    Hunk #3 succeeded at 1737 (offset 2 lines).
    Hunk #4 succeeded at 1786 (offset 2 lines).
    Hunk #5 succeeded at 1807 (offset 2 lines).
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/usb/caiaq'
    copying file alsa-kernel/usb/caiaq/caiaq-audio.c
    patching file caiaq-audio.c
    Hunk #1 succeeded at 1 with fuzz 2.
    Hunk #2 succeeded at 448 with fuzz 1 (offset -13 lines).
    Hunk #3 succeeded at 511 (offset -8 lines).
    copying file alsa-kernel/usb/caiaq/caiaq-device.c
    patching file caiaq-device.c
    Hunk #2 succeeded at 120 (offset 6 lines).
    Hunk #3 succeeded at 370 (offset 6 lines).
    copying file alsa-kernel/usb/caiaq/caiaq-input.c
    patching file caiaq-input.c
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/usb/caiaq'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/usb/usx2y'
    copying file alsa-kernel/usb/usx2y/usX2Yhwdep.c
    patching file usX2Yhwdep.c
    copying file alsa-kernel/usb/usx2y/usbusx2y.c
    patching file usbusx2y.c
    copying file alsa-kernel/usb/usx2y/usbusx2yaudio.c
    patching file usbusx2yaudio.c
    Hunk #11 succeeded at 1057 (offset 1 line).
    copying file alsa-kernel/usb/usx2y/usx2yhwdeppcm.c
    patching file usx2yhwdeppcm.c
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/usb/usx2y'
    make[2]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/usb'
    make[2]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pcmcia'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pcmcia/pdaudiocf'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pcmcia/pdaudiocf'
    make[3]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pcmcia/vx'
    make[3]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pcmcia/vx'
    make[2]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/pcmcia'
    make[2]: Entering directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/misc'
    make[2]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/misc'
    make[1]: Leaving directory `/usr/src/Alsa-1.0.18/alsa-driver-1.0.18'
    make -C /lib/modules/2.6.27-7-generic/build SUBDIRS=/usr/src/Alsa-1.0.18/alsa-driver-1.0.18  CPP="gcc -E" CC="gcc" modules
    make[1]: Entering directory `/usr/src/linux-headers-2.6.27-7-generic'
      CC [M]  /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/hwdep.o
    In file included from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/hwdep.c:1:
    /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h:283:1: warning: "GFP_DMA32" redefined
    In file included from include/linux/kmod.h:22,
                     from include/linux/module.h:13,
                     from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h:26,
                     from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/hwdep.c:1:
    include/linux/gfp.h:105:1: warning: this is the location of the previous definition
    In file included from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/hwdep.c:1:
    /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h:832: error: static declaration of ‘jiffies_to_msecs’ follows non-static declaration
    include/linux/jiffies.h:286: error: previous declaration of ‘jiffies_to_msecs’ was here
    /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h:851: error: static declaration of ‘msecs_to_jiffies’ follows non-static declaration
    include/linux/jiffies.h:288: error: previous declaration of ‘msecs_to_jiffies’ was here
    In file included from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h:949,
                     from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/hwdep.c:1:
    include/linux/pci.h:621: error: expected identifier or ‘(’ before numeric constant
    In file included from include/asm/pci.h:4,
                     from include/linux/pci.h:983,
                     from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h:949,
                     from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/hwdep.c:1:
    include/linux/mm.h:261: error: conflicting types for ‘snd_compat_vmalloc_to_page’
    /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h:753: error: previous declaration of ‘snd_compat_vmalloc_to_page’ was here
    In file included from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/hwdep.c:1:
    /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h: In function ‘snd_pci_orig_save_state’:
    /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h:1198: error: too many arguments to function ‘pci_save_state’
    /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h: In function ‘snd_pci_orig_restore_state’:
    /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h:1202: error: too many arguments to function ‘pci_restore_state’
    In file included from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/hwdep.c:1:
    /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h:1564:1: warning: "page_to_pfn" redefined
    In file included from include/asm/page.h:196,
                     from include/asm/pda.h:8,
                     from include/asm/current.h:19,
                     from include/asm/processor.h:15,
                     from include/linux/prefetch.h:14,
                     from include/linux/list.h:6,
                     from include/linux/module.h:9,
                     from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/include/adriver.h:26,
                     from /usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/hwdep.c:1:
    include/asm-generic/memory_model.h:78:1: warning: this is the location of the previous definition
    make[3]: *** [/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore/hwdep.o] Error 1
    make[2]: *** [/usr/src/Alsa-1.0.18/alsa-driver-1.0.18/acore] Error 2
    make[1]: *** [_module_/usr/src/Alsa-1.0.18/alsa-driver-1.0.18] Error 2
    make[1]: Leaving directory `/usr/src/linux-headers-2.6.27-7-generic'
    make: *** [compile] Error 2
    alsa-driver-1.0.18 make failed
    Last edited by knap; October 31st, 2008 at 05:50 PM.

  6. #16
    Join Date
    May 2006
    Beans
    112

    Re: Alsa 1.0.18 Installation Script

    Oh dear The first scripton this thread seems to have broke on my Aspire one running Hardy.

    1.0.18final Alsa drivers installed but didn't work, alsamixer failed too alsactl -v says 1.0.18


    however the earlier script 1.0.18r3 works a treat

    So I am reuploading it here with this Post.

    I havent tried the latest revision a cpl of posts up from this one. but the first one in this thread seems broke to me.
    Attached Files Attached Files
    Last edited by blackest_knight; November 2nd, 2008 at 11:49 PM. Reason: realised there was a later script on this thread

  7. #17
    Join Date
    Sep 2008
    Location
    Colorado Springs, CO
    Beans
    46
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: Alsa 1.0.18 Installation Script

    Please excuse any of my stupidity as I am very new to this. I have been trying to get sound on my acer 6920 working with intrepid. I am trying to install Alsa 1.0.18, but whenever I check the logfile it says "-------------------------------------------------------------
    - Prepare for compilation and installation...
    -------------------------------------------------------------

    /usr/src/Alsa-1.0.18 not found". I believe I have done this script correctly but I'm very new to this stuff so any help would be greatly appreciated.

  8. #18
    Join Date
    Apr 2007
    Beans
    10

    Re: Alsa 1.0.18 Installation Script

    I'm getting errors when i try to "sudo modprobe snd-hda-intel"

    sudo modprobe snd-hda-intel
    [sudo] password for bob:
    FATAL: Error inserting snd (/lib/modules/2.6.27-7-generic/kernel/sound/modules/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    WARNING: Error running install command for snd
    WARNING: Error inserting snd_hwdep (/lib/modules/2.6.27-7-generic/kernel/sound/modules/snd-hwdep.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    WARNING: Error inserting snd_timer (/lib/modules/2.6.27-7-generic/kernel/sound/modules/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    FATAL: Error inserting snd (/lib/modules/2.6.27-7-generic/kernel/sound/modules/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    WARNING: Error running install command for snd
    WARNING: Error inserting snd_timer (/lib/modules/2.6.27-7-generic/kernel/sound/modules/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    FATAL: Error inserting snd_pcm (/lib/modules/2.6.27-7-generic/kernel/sound/modules/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    WARNING: Error running install command for snd_pcm
    FATAL: Error inserting snd_hda_intel (/lib/modules/2.6.27-7-generic/kernel/sound/modules/snd-hda-intel.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    I added dmesg to you're uxchecker -a output...
    If you need more info, just say so.

    Additional info:
    I have a ICH8 (Asus p5b) on board soundcard, Ubuntu 8.10, linux 2.6.27-7-generic and alsa 1.18 installed with AlsaUpgrade-1.0.x-rev-1.11.sh
    aplay -l returns nothing, lspci | grep Audio does return the soundcard.
    And well I was about to try modprobe snd-hda-intel and then add it to the modules list.

    Oh and the sound didn't work before either....
    But modprobe did.

    -Bob
    Attached Files Attached Files

  9. #19
    Join Date
    Jul 2007
    Location
    DUS
    Beans
    183

    Re: Alsa 1.0.18 Installation Script

    Hi there.

    Quite some strange errors around here?!?

    If all the 160 people who downloaded the script by now have used it
    successfully, we are talking not about a generic issue with the script -
    I hope.

    1. The guys with the alsa-utils-error: Did you make it work?

    2. Hint: During these early days of Intrepid the kernel will be upgraded more often.
    If aplay -l doesn't show anything you should try to install the drivers again.

    The same if you're using two kernels. You can just install Alsa on one kernel. I discussed it with the Alsa guys. (This is the same with e.g. the
    fglrx driver.)
    The Alsa guys are planning to introduce Alsa to dkms sooner or later.
    This way Alsa would be autoinstalled on different kernels.

    3. You can or even should also issue 1.0.18 TroubleTickets especially driver related problems - on the Alsa-Mailing List.
    http://mailman.alsa-project.org/mail...nfo/alsa-devel
    They don't really use bugtracker or launchpad or similar.
    You can of course limit the risk of failure if you compile the alsa-drivers just for your particular soundcard.

    4. The whole Alsa installation procedure should be done only by people, who know what they are doing and who are able to understand what's done in the script. Linux
    beginners should not start with a manual installation of Alsa.
    This for sure will cause quite some frustration.

    5. In any way in case of problems the way to go is - "Google" .
    I do not do it any different in most of the cases.
    Usually you can Google the exact error message.



    6. If you look for new features something like "SPDIF over pulseaudio", what I wouldn't call a feature. Since SPDIF is a driver issue and
    if the driver/codec shows an SPDIF output you'd be able to run it with pulse. This would be the wrong place You should know that you need 1.0.18
    or you're a hacker who's happy only with the very latest revision number
    of everything.

    In case of new features or bugfixes you need to look up the revision changelogs at the Alsa homepage. Just do this exercise for fun and you'll start appreciate what these poor guys have to manage. I
    think it is ridiculous that the soundcard industry is not putting at least a bit support into this.

    Alsa is getting more and more complex. Some cards need even e.g. video drivers loaded to compile properly. I personally won't be able to cover it.

    If it turns out that the script is very unstable and causing damage I'll
    take it out again.

    Cheers

  10. #20
    Join Date
    Nov 2008
    Beans
    1

    Re: Alsa 1.0.18 Installation Script

    Hi,
    I used the alsa upgrade script on Acer Aspire one 150L with ubuntu, the log said me "Installation successfully finished". Now I have alsa 1.0.18 the sound, mic, headphone work but when I put headphone the system doesn't mute speakers.
    I tried the command alsamixer -V all to see the mixer but the command return "snd_mixer_load failed =invalid argument".

    The gnome-alsamixer give me "segmentation fault".

    How can I solve?

    (excuse me from my english)
    Attached Files Attached Files

Page 2 of 18 FirstFirst 123412 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •