Page 1 of 13 12311 ... LastLast
Results 1 to 10 of 123

Thread: Belkin USB Wireless Stick F5D7051

  1. #1
    Join Date
    Oct 2008
    Beans
    4

    Unhappy Belkin USB Wireless Stick F5D7051

    Hi all,

    Firstly, I am completely new to Linux so please go easy on me!

    I managed to get Ubuntu installed on my machine and was really chuffed with myself

    Unfortunately I have no idea how to install new software etc, I know it is something to do with the terminal thing but I have no idea about commands etc.

    The main thing I would like to do is to get my wireless USB stick (above) working so I can access the internet. Ubuntu does not automatically recognise it and it seems to have no power, no lights etc.

    Does anyone have a dummies guide in how to install software and then install my USB Stick so I can connect to the internet?

    My USB Stick is a BELKIN F5D7051.

    I really hope someone can help because I want to really get stuck in to this new OS and to learn Linux!

    Cheers

  2. #2
    Join Date
    Aug 2007
    Location
    Paris
    Beans
    5,538
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Belkin USB Wireless Stick F5D7051

    Please open a terminal (Applications>Accessories>Terminal), run the following commands and post the output here:
    Code:
    lsusb
    lshw -C Network
    (to copy terminal text, highlight it, right-click and select 'copy')

    That will help to figure out how to get your card working. Installing hardware drivers in Ubuntu is actually sort of a specialized process (and one that you usually don't need to worry about, as the Linux kernel comes with drivers built in for most hardware, although your wireless card is an exception). But for normal software, you usually install using Synaptic or Add/Remove Programs; take a look here for more information. But again, you won't be able to install wireless drivers that way.

  3. #3
    Join Date
    Oct 2008
    Beans
    4

    Re: Belkin USB Wireless Stick F5D7051

    Thanks for the speedy reply

    I am currently at work, so as soon as I am home I will complete the above and post the results here.

    Can't wait to get ubuntu working properly... woo hoo!

    Once again, thanks very much.

  4. #4
    Join Date
    Oct 2008
    Beans
    4

    Re: Belkin USB Wireless Stick F5D7051

    Hey,

    Here is the result of the command from the terminal.

    I am guessing this lists all devices that are attched to my PC? When I try to run this command with the wireless stick in, nothing happens, take it out and the command works fine!

    lsusb
    Bus 004 Device 001: ID 0000:0000
    Bus 003 Device 002: ID 116f:c108 Silicon 10 Technology Corp.
    Bus 003 Device 001: ID 0000:0000
    Bus 002 Device 001: ID 0000:0000
    Bus 001 Device 006: ID 043d:007b Lexmark International, Inc.
    Bus 001 Device 005: ID 043d:007c Lexmark International, Inc.
    Bus 001 Device 004: ID 045e:008c Microsoft Corp. Wireless Intellimouse Explorer 2.0
    Bus 001 Device 003: ID 043d:007a Lexmark International, Inc.
    Bus 001 Device 001: ID 0000:0000
    tim@Home:~$ lshw -cnetwork
    Hardware Lister (lshw) - B.02.12.01
    usage: lshw [-format] [-options ...]
    lshw -version

    -version print program version (B.02.12.01)

    format can be
    -html output hardware tree as HTML
    -xml output hardware tree as XML
    -short output hardware paths
    -businfo output bus information

    options can be
    -class CLASS only show a certain class of hardware
    -C CLASS same as '-class CLASS'
    -disable TEST disable a test (like pci, isapnp, cpuid, etc. )
    -enable TEST enable a test (like pci, isapnp, cpuid, etc. )
    -quiet don't display status
    -sanitize sanitize output (remove sensitive information like serial numbers, etc.)

    Hope this is what you were looking for.

    Many Thanks

  5. #5
    Join Date
    Feb 2008
    Location
    Ohio
    Beans
    195
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Belkin USB Wireless Stick F5D7051

    Not sure what you've tried, but I have Belkin Wireless G USB F5D7050 installed on an old Dell Latitiude CP M233St with xubuntu and a Desktop running ubuntu hardy herron. Responding on Desktop using Belkin F5D7050, v. 3000 with rt73 driver. Install has been the same using ndiswrapper and the Belkin install cd as follows: (This process should also work for your USB)

    Unplug adapter before you boot.

    Install ndiswrapper through Synaptic.

    Open terminal.

    Remove the following drivers using these commands:

    Code:
    sudo modprobe -r rt2500usb
    sudo modprobe -r rt73usb

    I'm not sure that this actually removes the drivers, but after 3 weeks of farting around with them it made me feel better.

    Blacklist rt2500usb and rt73usb by opening text editor (mousepad for Xubuntu - gedit for Ubuntu) as follows:

    Code:
    sudo gedit /etc/modprobe.d/blacklist
    add "blacklist rt2500usb" and "blacklist rt73usb" (Without the quotes) to end of list, save and close.

    REBOOT

    This is where the guides I was following failed. Blacklist doesn't work until you reboot. If you don't, the wrong driver will be associated.

    On your desktop, open "Home" - right click in an open area and create a file - I called mine "Belkin". Insert the install cd. Open and navigate to the driver file under XP. there will be 3 files. Copy all 3 files to the file you created under "Home" by dragging and dropping. The drivers will not load directly from the cd.

    Now install the driver you just copied with the following (If the .inf file you copied is not the rt73, replace as appropriate below) :

    Code:
    sudo ndiswrapper -i /home/(your user name)/Belkin/rt73.inf
    Insert the wireless adapter.

    Now issue the following commands:

    Code:
    sudo depmod -a
    sudo modprobe ndiswrapper
    I think these create the module. Now edit modules to load ndiswrapper when you boot as follows (If you are using Xubuntu, replace gedit with mousepad):

    Code:
    sudo gedit /etc/modules
    Add "ndiswrapper" (without quotes) to the end of the list.

    Establish alias with following command:

    Code:
    sudo ndiswrapper -m
    Reboot

    Give it a shot.

  6. #6
    Join Date
    Aug 2007
    Location
    Paris
    Beans
    5,538
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Belkin USB Wireless Stick F5D7051

    Tim Hughes: the instructions in the post above should work if your card has a Ralink rt73 chipset. It's impossible to know for sure which chipset you have, however, without seeing the output of 'lsusb' when your card is plugged in. You say that when you ran that command with the card plugged in, nothing happened? That's really strange. Did it just return you to the command prompt without printing anything out?

    Maybe things would work better if you reboot your computer, then plug the wireless card into a USB port that you know works. Then run these commands and post the output:
    Code:
    lsusb
    lshw -C Network
    lsmod
    Note that the C in 'lshw -C Network' is capitalized (case matters in the Unix world!), and that there's a space between '-C' and 'Network'. When you typed the command before, it didn't print out the information I was looking for because of these problems.

    You say that your card is called F5D7051, while james' is F5D7050, so I'd be hesitant to assume that they necessarily both contain the same chipsets.

  7. #7
    Join Date
    Oct 2008
    Beans
    4

    Re: Belkin USB Wireless Stick F5D7051

    Right!

    I am CONNECTED!!!

    I upgraded to 8.10 and this fixed everything. They must have added the driver to the default drivers list.

    I can't thank you both enough for all your help.

    Here's to a problem fre life with Ubuntu!

  8. #8
    Join Date
    Nov 2008
    Beans
    5

    Re: Belkin USB Wireless Stick F5D7051

    Hi guys, I was wondering if you could help me out a bit? I have the exact same problem as Tim had, only I have Ubuntu 8.10 installed and I still cant get it to work... whenever i try to type
    Code:
    lsusb
    nothing happens, unless I unplug the usb device, then it instanty gives the information about my usb ports... Any clue on how I might get it to recognize my device ?

  9. #9
    Join Date
    Aug 2007
    Location
    Paris
    Beans
    5,538
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Belkin USB Wireless Stick F5D7051

    Resarcio: so when the device is plugged in and you type 'lsusb' it doesn't mention it anywhere? Have you tried all of your different USB ports? If so, it could be a hardware problem.

    If you plug the device in (and keep it in), then immediately run the commands:
    Code:
    dmesg | tail
    lsusb
    what is the output?

  10. #10
    Join Date
    Nov 2008
    Beans
    5

    Re: Belkin USB Wireless Stick F5D7051

    Geez this forum is just hellbend on not wanting to let me log in ...

    Anyways, first attempt :
    Code:
    draug@draug:~$ dmesg | tail
    [   46.596275] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   46.596305] Bluetooth: BNEP filters: protocol multicast
    [   46.690942] Bridge firewalling registered
    [   46.693930] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
    [   46.736836] Bluetooth: SCO (Voice Link) ver 0.6
    [   46.736856] Bluetooth: SCO socket layer initialized
    [   50.933038] eth0: link down
    [  123.729264] hub 1-0:1.0: unable to enumerate USB device on port 1
    [  124.036122] usb 1-1: new full speed USB device using ohci_hcd and address 3
    [  124.289884] usb 1-1: configuration #1 chosen from 1 choice
    draug@draug:~$ lsusb
    Second attempt where I removed usb wireless after approx 5 sec of inactivity
    Code:
    draug@draug:~$ dmesg | tail
    [  410.042855] usbcore: registered new interface driver cdc_ether
    [  410.292322] usbcore: registered new interface driver rndis_host
    [  410.382679] usbcore: registered new interface driver rndis_wlan
    [  410.603079] ppdev0: registered pardevice
    [  411.092779] ppdev0: unregistered pardevice
    [  412.992398] ppdev0: registered pardevice
    [  413.128896] ppdev0: unregistered pardevice
    [  425.772124] hub 1-0:1.0: unable to enumerate USB device on port 1
    [  426.077231] usb 1-1: new full speed USB device using ohci_hcd and address 5
    [  426.351343] usb 1-1: configuration #1 chosen from 1 choice
    draug@draug:~$ lsusb
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    draug@draug:~$
    So the lsusb only replies when I remove usb device... and yes all my ports work properly, I tested them with a usb key and it found it immediately.. Hope this helps... and thx for the fast reply btw

Page 1 of 13 12311 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •