Hello, I've been all over trying to get the ir receiver that came with my HP9250f. I have determined (by booting into windows) that it is a standard MCE remote with exception to it's device ID. Knowing this I patched the mceusb2.c file in the Lirc source code with the proper device ID listed in the output below. Still whenever when I start Lirc no devices are created and/or recognized as a receiver. If anyone has any ideas or has had this problem any help would be apreciated. Thanks.
Below are the relevant lsusb and cat /proc/bus/usb/devices output if you want anything else I will be glad to post it.
Bus 008 Device 035: ID 04eb:e004 Northstar Systems, Inc.
T: Bus=08 Lev=02 Prnt=33 Port=01 Cnt=02 Dev#= 35 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04eb ProdID=e004 Rev= 3.60
S: Product=eHome Infrared Transceiver
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=01(O) Atr=03(Int.) MxPS= 32 Ivl=8ms
E: Ad=82(I) Atr=03(Int.) MxPS= 32 Ivl=8ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=8ms