OK, will try.
I'll update later
OK, will try.
I'll update later
Sutekh
After trying to install the XML parser, got this errors
Here's the last part of the log, too long to paste here
Expat.xs:2194: error: syntax error before ‘)’ token
Expat.xs:2197: error: ‘parser’ undeclared (first use in this function)
make[1]: *** [Expat.o] Error 1
make[1]: Leaving directory `/home/...../.cpan/build/XML-Parser-2.34/Expat'
make: *** [subdirs] Error 2
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
cpan>
That doesn't sound encouraging does it? What exactly are you trying to install? For the most part its alot easier to install via Synaptic or a .deb rather than from source.Originally Posted by j813
Everything worked well but I have 2 questions:
1. For some reason my main drive /dev/sda is not listed in the HD tempoptions...just an ide drive that i have in the machine. The sata drive is new and i'm quite sute its SMART enabled.
2. Is there anyway to change the labels that that the panel applet uses? Tem3 is my mobo sensor and i'd like to display that instead of "temp3".
Thanks,
mak
PS: Good how to!
awesome How-To, works for me on my amd64 machine
Did you miss this step?checking for XML:arser... configure: error: XML:arser perl module is required for intltool
Code:sudo apt-get install libxml-parser-perlNo clue, sorry. What does1. For some reason my main drive /dev/sda is not listed in the HD tempoptions...just an ide drive that i have in the machine. The sata drive is new and i'm quite sute its SMART enabled.
do?Code:sudo hddtemp /dev/sda
That one I know. Right-click on the sensors applet in your panel, select the 'Sensors' tab, select right-arrow next to the sensor corresponding to your mobo (it's i2c-sys for me, but this will vary) to drop down its submenu. Then select the Tem3 line, and, then select the label and it'll become an edit box and you can change it. (Don't double-click quickly -- it's like renaming a file in Windows.)2. Is there anyway to change the labels that that the panel applet uses? Tem3 is my mobo sensor and i'd like to display that instead of "temp3".
How blind can I be. Too much excited.
Will update you Zed.
BTW I installed from Synaptic the SMART sensors, X-sensor(which is running fine but too large Graphics). Is it just OK?
Great now it is working
Although on the "make" command it gave me this errors
main.c:40: fatal error: opening dependency file .deps/main.Tpo: Permission denied
compilation terminated.
make[2]: *** [main.o] Error 1
make[2]: Leaving directory `/home/j813/Desktop/Downloads/sensors-applet-1.5.2/src'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/j813/Desktop/Downloads/sensors-applet-1.5.2/src'
make: *** [all-recursive] Error 1
(which I just ignored & did the "sudo make install" command) & seem to be working
When i did this it says no sensors found...help?
Last edited by appdx; December 30th, 2005 at 08:59 PM.
Nice howto. Everything went ok. Thanks a lot for this.
Bookmarks