Page 1 of 6 123 ... LastLast
Results 1 to 10 of 58

Thread: Sound NOT Working on UBUNTU 10.04 [Installed using Boot CD]

  1. #1
    Join Date
    May 2010
    Beans
    73
    Distro
    Ubuntu 11.04 Natty Narwhal

    Angry Sound NOT Working on UBUNTU 10.04 [Installed using Boot CD]

    I download Ubuntu 10.04 the other day, it is my 1st time using it, and it is so good.

    but my problem is that there is no sound in it. I did not edit any settings in it or other config files, i just did a partial upgrade in it because when i Opened Update Manager, it says that I should upgrade.

    The first thing I noticed was that the speaker icon doesnt have any sound waves in it.

    Screenshot.jpg

    As you can see in there, the volumes are all normal but the speaker icon (on the bottom right) doesnt seem to respond from the actual settings.

    Here are also some pictures that might help you to help me solve my problem.

    Screenshot-1.jpg

    Screenshot-2.jpg

    Screenshot-3.jpg

    Second, I noticed that before I can login, before I can select my user account at the boot-up process, some text shows up. It shows up something like this:

    Code:
    Alsa Intel 8x0 error_codec ready: codec not ready [007x00]
    NOTE: That is not the actual text, those are just some words that i can remember, but the words ALSA, INTEL 8x0, CODEC are absolutely there, I am sure.

    The error is seen in a black screen, and the text color is white.

    HERE ARE SOME OUTPUT OF THE CODES [IN TERMINAL] THAT ARE OFTEN ASKED TO SOLVE SOUND PROBLEMS:

    cat /proc/asound/version :
    Code:
    Advanced Linux Sound Architecture Driver Version 1.0.23.
    Compiled on May 21 2010 for kernel 2.6.32-22-generic (SMP).
    cat /proc/asound/cards :
    Code:
    --- no soundcards ---
    lsmod :
    Code:
    Module                  Size  Used by
    binfmt_misc             6587  1 
    ppdev                   5259  0 
    snd_intel8x0           25960  0 
    snd_ac97_codec        101347  1 snd_intel8x0
    ac97_bus                1002  1 snd_ac97_codec
    snd_pcm_oss            41611  0 
    snd_mixer_oss          13461  1 snd_pcm_oss
    fbcon                  35102  71 
    snd_pcm                78086  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    tileblit                2031  1 fbcon
    font                    7557  1 fbcon
    snd_seq_dummy           1498  0 
    bitblit                 4707  1 fbcon
    snd_seq_oss            30866  0 
    softcursor              1189  1 bitblit
    snd_seq_midi            5101  0 
    snd_rawmidi            19879  1 snd_seq_midi
    vga16fb                11385  0 
    vgastate                8961  1 vga16fb
    pcmcia                 33024  0 
    snd_seq_midi_event      5939  2 snd_seq_oss,snd_seq_midi
    joydev                  8708  0 
    snd_seq                51494  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    yenta_socket           20408  1 
    radeon                674135  3 
    rsrc_nonstatic         10015  1 yenta_socket
    snd_timer              19106  2 snd_pcm,snd_seq
    ttm                    49943  1 radeon
    drm_kms_helper         29297  1 radeon
    snd_seq_device          5990  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    tifm_7xx1               3690  0 
    irda                  186556  0 
    pcmcia_core            32964  3 pcmcia,yenta_socket,rsrc_nonstatic
    drm                   162471  5 radeon,ttm,drm_kms_helper
    psmouse                63245  0 
    tifm_core               6045  1 tifm_7xx1
    snd                    62362  13 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq_midi_event,snd_seq,snd_timer,snd_seq_device
    i2c_algo_bit            5028  1 radeon
    intel_agp              24177  1 
    lp                      7028  0 
    video                  17375  0 
    crc_ccitt               1339  1 irda
    ipw2200               135216  0 
    libipw                 39896  1 ipw2200
    lib80211                5046  2 ipw2200,libipw
    serio_raw               3978  0 
    agpgart                31724  3 ttm,drm,intel_agp
    soundcore               6620  1 snd
    snd_page_alloc          7140  2 snd_intel8x0,snd_pcm
    output                  1871  1 video
    parport                32635  2 ppdev,lp
    shpchp                 28820  0 
    led_class               2864  0 
    ohci1394               26950  0 
    b44                    25542  0 
    ieee1394               81181  1 ohci1394
    ssb                    37336  1 b44
    mii                     4381  1 b44
    lspci :
    Code:
    00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:01.0 PCI bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to AGP Controller (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
    00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
    00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
    02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
    02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
    02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
    02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
    02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
    lspci | grep audio :
    Code:
    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
    aplay -l :
    Code:
    aplay: device_list:223: no soundcards found...
    lspci -v :
    Code:
    00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, fast devsel, latency 0
        Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel
        Kernel modules: intel-agp
    
    00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, fast devsel, latency 0
    
    00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, fast devsel, latency 0
    
    00:01.0 PCI bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to AGP Controller (rev 02)
        Flags: bus master, 66MHz, fast devsel, latency 96
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: d0100000-d01fffff
        Prefetchable memory behind bridge: d8000000-dfffffff
        Kernel modules: shpchp
    
    00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 0, IRQ 6
        I/O ports at 1800 [size=32]
        Kernel driver in use: uhci_hcd
    
    00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 0, IRQ 6
        I/O ports at 1820 [size=32]
        Kernel driver in use: uhci_hcd
    
    00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 0, IRQ 6
        I/O ports at 1840 [size=32]
        Kernel driver in use: uhci_hcd
    
    00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 0, IRQ 10
        Memory at d0000000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd
    
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: d0200000-d05fffff
        Prefetchable memory behind bridge: 10000000-15ffffff
        Kernel modules: shpchp
    
    00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
        Flags: bus master, medium devsel, latency 0
        Kernel modules: iTCO_wdt, intel-rng
    
    00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 0, IRQ 6
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at 1860 [size=16]
        Memory at 16000000 (32-bit, non-prefetchable) [size=1K]
        Kernel driver in use: ata_piix
    
    00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: medium devsel, IRQ 10
        I/O ports at 1880 [size=32]
        Kernel modules: i2c-i801
    
    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: medium devsel, IRQ 10
        I/O ports at 1c00 [size=256]
        I/O ports at 18c0 [size=64]
        Memory at d0000c00 (32-bit, non-prefetchable) [size=512]
        Memory at d0000800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel modules: snd-intel8x0
    
    00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: medium devsel, IRQ 10
        I/O ports at 2400 [size=256]
        I/O ports at 2000 [size=128]
        Capabilities: <access denied>
        Kernel modules: snd-intel8x0m
    
    01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 66, IRQ 6
        Memory at d8000000 (32-bit, prefetchable) [size=128M]
        I/O ports at 3000 [size=256]
        Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at d0120000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: radeon
        Kernel modules: radeonfb, radeon
    
    02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, fast devsel, latency 64, IRQ 6
        Memory at d0204000 (32-bit, non-prefetchable) [size=8K]
        [virtual] Expansion ROM at 14000000 [disabled] [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: b44
        Kernel modules: b44
    
    02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
        Subsystem: Intel Corporation Device 2701
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at d0208000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: ipw2200
        Kernel modules: ipw2200
    
    02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 168, IRQ 10
        Memory at d0209000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
        Memory window 0: 10000000-13fff000 (prefetchable)
        Memory window 1: 18000000-1bfff000
        I/O window 0: 00004000-000040ff
        I/O window 1: 00004400-000044ff
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus
        Kernel modules: yenta_socket
    
    02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at d020a000 (32-bit, non-prefetchable) [size=2K]
        Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: ohci1394
        Kernel modules: firewire-ohci, ohci1394
    
    02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at d0206000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: tifm_7xx1
        Kernel modules: tifm_7xx1
    uname -a :
    Code:
    Linux Ubuntu 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 i686 GNU/Linux
    head -n 1 /proc/asound/card*/codec#* :
    Code:
    head: cannot open `/proc/asound/card*/codec#*' for reading: No such file or directory
    this is the content of /etc/modprobe.d/alsa-base.conf :
    Code:
    # autoloader aliases
    install sound-slot-0 /sbin/modprobe snd-card-0
    install sound-slot-1 /sbin/modprobe snd-card-1
    install sound-slot-2 /sbin/modprobe snd-card-2
    install sound-slot-3 /sbin/modprobe snd-card-3
    install sound-slot-4 /sbin/modprobe snd-card-4
    install sound-slot-5 /sbin/modprobe snd-card-5
    install sound-slot-6 /sbin/modprobe snd-card-6
    install sound-slot-7 /sbin/modprobe snd-card-7
    
    # Cause optional modules to be loaded above generic modules
    install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
    #
    # Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
    install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
    install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
    install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
    #
    install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
    # Cause optional modules to be loaded above sound card driver modules
    install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
    install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }
    
    # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
    install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
    # Prevent abnormal drivers from grabbing index 0
    options bt87x index=-2
    options cx88_alsa index=-2
    options saa7134-alsa index=-2
    options snd-atiixp-modem index=-2
    options snd-intel8x0m index=-2
    options snd-via82xx-modem index=-2
    options snd-usb-audio index=-2
    options snd-usb-us122l index=-2
    options snd-usb-usx2y index=-2
    options snd-usb-caiaq index=-2
    # Ubuntu #62691, enable MPU for snd-cmipci
    options snd-cmipci mpu_port=0x330 fm_port=0x388
    # Keep snd-pcsp from being loaded as first soundcard
    options snd-pcsp index=-2
    sudo alsaconf :
    Code:
    [sudo] password for gio: 
    sudo: alsaconf: command not found
    amixer :
    Code:
    amixer: Mixer attach default error: No such file or directory
    alsamixer :
    Code:
    cannot open mixer: No such file or directory
    FOR ME, I THINK THE PROBLEM IS WITH THE CODEC, AS STATED ABOVE:

    Code:
    Second, I noticed that before I can login, before I can  select my user account at the boot-up process, some text shows up. It  shows up something like this:
    
    
    Code:
    Alsa Intel 8x0 error_codec ready: codec not ready [007x00]
    I REALLY NEED THE SOUND TO WORK SO PLEASE HELP ME.
    Last edited by frozonecom; May 23rd, 2010 at 05:32 AM.

  2. #2
    Join Date
    Jan 2008
    Beans
    14

    Re: Sound NOT Working on UBUNTU 10.04 [Installed using Boot CD]

    Quote Originally Posted by frozonecom View Post
    I download Ubuntu 10.04 the other day, it is my 1st time using it, and it is so good.

    but my problem is that there is no sound in it. I did not edit any settings in it or other config files, i just did a partial upgrade in it because when i Opened Update Manager, it says that I should upgrade.

    The first thing I noticed was that the speaker icon doesnt have any sound waves in it.

    Screenshot.jpg

    As you can see in there, the volumes are all normal but the speaker icon (on the bottom right) doesnt seem to respond from the actual settings.

    Here are also some pictures that might help you to help me solve my problem.

    Screenshot-1.jpg

    Screenshot-2.jpg

    Screenshot-3.jpg

    Second, I noticed that before I can login, before I can select my user account at the boot-up process, some text shows up. It shows up something like this:

    Code:
    Alsa Intel 8x0 error_codec ready: codec not ready [007x00]
    NOTE: That is not the actual text, those are just some words that i can remember, but the words ALSA, INTEL 8x0, CODEC are absolutely there, I am sure.

    The error is seen in a black screen, and the text color is white.

    HERE ARE SOME OUTPUT OF THE CODES [IN TERMINAL] THAT ARE OFTEN ASKED TO SOLVE SOUND PROBLEMS:

    cat /proc/asound/version :
    Code:
    Advanced Linux Sound Architecture Driver Version 1.0.23.
    Compiled on May 21 2010 for kernel 2.6.32-22-generic (SMP).
    cat /proc/asound/cards :
    Code:
    --- no soundcards ---
    lsmod :
    Code:
    Module                  Size  Used by
    binfmt_misc             6587  1 
    ppdev                   5259  0 
    snd_intel8x0           25960  0 
    snd_ac97_codec        101347  1 snd_intel8x0
    ac97_bus                1002  1 snd_ac97_codec
    snd_pcm_oss            41611  0 
    snd_mixer_oss          13461  1 snd_pcm_oss
    fbcon                  35102  71 
    snd_pcm                78086  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    tileblit                2031  1 fbcon
    font                    7557  1 fbcon
    snd_seq_dummy           1498  0 
    bitblit                 4707  1 fbcon
    snd_seq_oss            30866  0 
    softcursor              1189  1 bitblit
    snd_seq_midi            5101  0 
    snd_rawmidi            19879  1 snd_seq_midi
    vga16fb                11385  0 
    vgastate                8961  1 vga16fb
    pcmcia                 33024  0 
    snd_seq_midi_event      5939  2 snd_seq_oss,snd_seq_midi
    joydev                  8708  0 
    snd_seq                51494  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    yenta_socket           20408  1 
    radeon                674135  3 
    rsrc_nonstatic         10015  1 yenta_socket
    snd_timer              19106  2 snd_pcm,snd_seq
    ttm                    49943  1 radeon
    drm_kms_helper         29297  1 radeon
    snd_seq_device          5990  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    tifm_7xx1               3690  0 
    irda                  186556  0 
    pcmcia_core            32964  3 pcmcia,yenta_socket,rsrc_nonstatic
    drm                   162471  5 radeon,ttm,drm_kms_helper
    psmouse                63245  0 
    tifm_core               6045  1 tifm_7xx1
    snd                    62362  13 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq_midi_event,snd_seq,snd_timer,snd_seq_device
    i2c_algo_bit            5028  1 radeon
    intel_agp              24177  1 
    lp                      7028  0 
    video                  17375  0 
    crc_ccitt               1339  1 irda
    ipw2200               135216  0 
    libipw                 39896  1 ipw2200
    lib80211                5046  2 ipw2200,libipw
    serio_raw               3978  0 
    agpgart                31724  3 ttm,drm,intel_agp
    soundcore               6620  1 snd
    snd_page_alloc          7140  2 snd_intel8x0,snd_pcm
    output                  1871  1 video
    parport                32635  2 ppdev,lp
    shpchp                 28820  0 
    led_class               2864  0 
    ohci1394               26950  0 
    b44                    25542  0 
    ieee1394               81181  1 ohci1394
    ssb                    37336  1 b44
    mii                     4381  1 b44
    lspci :
    Code:
    00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:01.0 PCI bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to AGP Controller (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
    00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
    00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
    02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
    02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
    02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
    02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
    02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
    lspci | grep audio :
    Code:
    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
    aplay -l :
    Code:
    aplay: device_list:223: no soundcards found...
    lspci -v :
    Code:
    00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, fast devsel, latency 0
        Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel
        Kernel modules: intel-agp
    
    00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, fast devsel, latency 0
    
    00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, fast devsel, latency 0
    
    00:01.0 PCI bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to AGP Controller (rev 02)
        Flags: bus master, 66MHz, fast devsel, latency 96
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: d0100000-d01fffff
        Prefetchable memory behind bridge: d8000000-dfffffff
        Kernel modules: shpchp
    
    00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 0, IRQ 6
        I/O ports at 1800 [size=32]
        Kernel driver in use: uhci_hcd
    
    00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 0, IRQ 6
        I/O ports at 1820 [size=32]
        Kernel driver in use: uhci_hcd
    
    00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 0, IRQ 6
        I/O ports at 1840 [size=32]
        Kernel driver in use: uhci_hcd
    
    00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 0, IRQ 10
        Memory at d0000000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd
    
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: d0200000-d05fffff
        Prefetchable memory behind bridge: 10000000-15ffffff
        Kernel modules: shpchp
    
    00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
        Flags: bus master, medium devsel, latency 0
        Kernel modules: iTCO_wdt, intel-rng
    
    00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 0, IRQ 6
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at 1860 [size=16]
        Memory at 16000000 (32-bit, non-prefetchable) [size=1K]
        Kernel driver in use: ata_piix
    
    00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: medium devsel, IRQ 10
        I/O ports at 1880 [size=32]
        Kernel modules: i2c-i801
    
    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: medium devsel, IRQ 10
        I/O ports at 1c00 [size=256]
        I/O ports at 18c0 [size=64]
        Memory at d0000c00 (32-bit, non-prefetchable) [size=512]
        Memory at d0000800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel modules: snd-intel8x0
    
    00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: medium devsel, IRQ 10
        I/O ports at 2400 [size=256]
        I/O ports at 2000 [size=128]
        Capabilities: <access denied>
        Kernel modules: snd-intel8x0m
    
    01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 66, IRQ 6
        Memory at d8000000 (32-bit, prefetchable) [size=128M]
        I/O ports at 3000 [size=256]
        Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at d0120000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: radeon
        Kernel modules: radeonfb, radeon
    
    02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, fast devsel, latency 64, IRQ 6
        Memory at d0204000 (32-bit, non-prefetchable) [size=8K]
        [virtual] Expansion ROM at 14000000 [disabled] [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: b44
        Kernel modules: b44
    
    02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
        Subsystem: Intel Corporation Device 2701
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at d0208000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: ipw2200
        Kernel modules: ipw2200
    
    02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 168, IRQ 10
        Memory at d0209000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
        Memory window 0: 10000000-13fff000 (prefetchable)
        Memory window 1: 18000000-1bfff000
        I/O window 0: 00004000-000040ff
        I/O window 1: 00004400-000044ff
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus
        Kernel modules: yenta_socket
    
    02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10)
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at d020a000 (32-bit, non-prefetchable) [size=2K]
        Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: ohci1394
        Kernel modules: firewire-ohci, ohci1394
    
    02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
        Subsystem: Acer Incorporated [ALI] Device 0064
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at d0206000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: tifm_7xx1
        Kernel modules: tifm_7xx1
    uname -a :
    Code:
    Linux Ubuntu 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 i686 GNU/Linux
    head -n 1 /proc/asound/card*/codec#* :
    [CODE][head: cannot open `/proc/asound/card*/codec#*' for reading: No such file or directory
    /CODE]

    this is the content of /etc/modprobe.d/alsa-base.conf :
    Code:
    # autoloader aliases
    install sound-slot-0 /sbin/modprobe snd-card-0
    install sound-slot-1 /sbin/modprobe snd-card-1
    install sound-slot-2 /sbin/modprobe snd-card-2
    install sound-slot-3 /sbin/modprobe snd-card-3
    install sound-slot-4 /sbin/modprobe snd-card-4
    install sound-slot-5 /sbin/modprobe snd-card-5
    install sound-slot-6 /sbin/modprobe snd-card-6
    install sound-slot-7 /sbin/modprobe snd-card-7
    
    # Cause optional modules to be loaded above generic modules
    install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
    #
    # Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
    install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
    install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
    install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
    #
    install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
    # Cause optional modules to be loaded above sound card driver modules
    install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
    install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }
    
    # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
    install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
    # Prevent abnormal drivers from grabbing index 0
    options bt87x index=-2
    options cx88_alsa index=-2
    options saa7134-alsa index=-2
    options snd-atiixp-modem index=-2
    options snd-intel8x0m index=-2
    options snd-via82xx-modem index=-2
    options snd-usb-audio index=-2
    options snd-usb-us122l index=-2
    options snd-usb-usx2y index=-2
    options snd-usb-caiaq index=-2
    # Ubuntu #62691, enable MPU for snd-cmipci
    options snd-cmipci mpu_port=0x330 fm_port=0x388
    # Keep snd-pcsp from being loaded as first soundcard
    options snd-pcsp index=-2
    sudo alsaconf :
    Code:
    [sudo] password for gio: 
    sudo: alsaconf: command not found
    amixer :
    Code:
    amixer: Mixer attach default error: No such file or directory
    alsamixer :
    Code:
    cannot open mixer: No such file or directory
    FOR ME, I THINK THE PROBLEM IS WITH THE CODEC, AS STATED ABOVE:

    Code:
    Second, I noticed that before I can login, before I can  select my user account at the boot-up process, some text shows up. It  shows up something like this:
    
    
    Code:
    Alsa Intel 8x0 error_codec ready: codec not ready [007x00]
    I REALLY NEED THE SOUND TO WORK SO PLEASE HELP ME.
    Please, can you upload your /var/log/dmesg ?

  3. #3
    Join Date
    May 2010
    Beans
    73
    Distro
    Ubuntu 11.04 Natty Narwhal

    Angry Re: Sound NOT Working on UBUNTU 10.04 [Installed using Boot CD]

    /var/log/dmesg

    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000000fee0000 (usable)
    [    0.000000]  BIOS-e820: 000000000fee0000 - 000000000feec000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000000feec000 - 000000000ff00000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
    [    0.000000] DMI present.
    [    0.000000] last_pfn = 0xfee0 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-C7FFF write-protect
    [    0.000000]   C8000-EFFFF uncachable
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FF0000000 write-back
    [    0.000000]   1 base 00FF00000 mask FFFF00000 uncachable
    [    0.000000]   2 disabled
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] PAT not supported by CPU.
    [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] modified physical RAM map:
    [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
    [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
    [    0.000000]  modified: 0000000000006000 - 000000000009f800 (usable)
    [    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  modified: 00000000000dc000 - 0000000000100000 (reserved)
    [    0.000000]  modified: 0000000000100000 - 000000000fee0000 (usable)
    [    0.000000]  modified: 000000000fee0000 - 000000000feec000 (ACPI data)
    [    0.000000]  modified: 000000000feec000 - 000000000ff00000 (ACPI NVS)
    [    0.000000]  modified: 000000000ff00000 - 0000000010000000 (reserved)
    [    0.000000]  modified: 00000000fec10000 - 00000000fec20000 (reserved)
    [    0.000000]  modified: 00000000ff800000 - 00000000ffc00000 (reserved)
    [    0.000000]  modified: 00000000fffffc00 - 0000000100000000 (reserved)
    [    0.000000] initial memory mapped : 0 - 00c00000
    [    0.000000] init_memory_mapping: 0000000000000000-000000000fee0000
    [    0.000000] Using x86 segment limits to approximate NX protection
    [    0.000000]  0000000000 - 0000400000 page 4k
    [    0.000000]  0000400000 - 000fc00000 page 2M
    [    0.000000]  000fc00000 - 000fee0000 page 4k
    [    0.000000] kernel direct mapping tables up to fee0000 @ 7000-c000
    [    0.000000] RAMDISK: 0b7d1000 - 0bf67ec8
    [    0.000000] ACPI: RSDP 000f62c0 00014 (v00 ACER  )
    [    0.000000] ACPI: RSDT 0fee6205 00030 (v01 ACER   Kestrel  20021012  LTP 00000000)
    [    0.000000] ACPI: FACP 0feebf2c 00074 (v01 ACER   Kestrel  20021012 PTL  00000050)
    [    0.000000] ACPI: DSDT 0fee6235 05CF7 (v01 ACER   Kestrel  20021012 MSFT 0100000E)
    [    0.000000] ACPI: FACS 0fefcfc0 00040
    [    0.000000] ACPI: HPET 0feebfa0 00038 (v01 ACER   Kestrel  20021012 PTL  00000000)
    [    0.000000] ACPI: BOOT 0feebfd8 00028 (v01 ACER   Kestrel  20021012  LTP 00000001)
    [    0.000000] 0MB HIGHMEM available.
    [    0.000000] 254MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 0fee0000
    [    0.000000]   low ram: 0 - 0fee0000
    [    0.000000]   node 0 low ram: 00000000 - 0fee0000
    [    0.000000]   node 0 bootmap 00008000 - 00009fdc
    [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 000fee0000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    [    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
    [    0.000000]   #4 [000b7d1000 - 000bf67ec8]          RAMDISK ==> [000b7d1000 - 000bf67ec8]
    [    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
    [    0.000000]   #6 [00008da000 - 00008dd174]              BRK ==> [00008da000 - 00008dd174]
    [    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
    [    0.000000]   #8 [0000008000 - 000000a000]          BOOTMAP ==> [0000008000 - 000000a000]
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000000 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x0000fee0
    [    0.000000]   HighMem  0x0000fee0 -> 0x0000fee0
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000000 -> 0x00000002
    [    0.000000]     0: 0x00000006 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x0000fee0
    [    0.000000] On node 0 totalpages: 65147
    [    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001000
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
    [    0.000000]   Normal zone: 478 pages used for memmap
    [    0.000000]   Normal zone: 60674 pages, LIFO batch:15
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x1008
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid
    [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
    [    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
    [    0.000000] APIC: disable apic facility
    [    0.000000] nr_irqs_gsi: 16
    [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eec10000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36024 r0 d21320 u4194304
    [    0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
    [    0.000000] pcpu-alloc: [0] 0 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64637
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=0eb5e1e5-2aaf-4e9c-b6ea-b4e05c5e9afd ro quiet splash
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 1304960 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [    0.000000] Memory: 240784k/260992k available (4673k kernel code, 19456k reserved, 2121k data, 656k init, 0k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xd06e0000 - 0xff7fe000   ( 753 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xcfee0000   ( 254 MB)
    [    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
    [    0.000000]       .data : 0xc0590653 - 0xc07a2e48   (2121 kB)
    [    0.000000]       .text : 0xc0100000 - 0xc0590653   (4673 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] NR_IRQS:2304 nr_irqs:256
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 1498.925 MHz processor.
    [    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2997.85 BogoMIPS (lpj=5995700)
    [    0.004030] Security Framework initialized
    [    0.004063] AppArmor: AppArmor initialized
    [    0.004072] Mount-cache hash table entries: 512
    [    0.004231] Initializing cgroup subsys ns
    [    0.008006] Initializing cgroup subsys cpuacct
    [    0.008012] Initializing cgroup subsys memory
    [    0.008024] Initializing cgroup subsys devices
    [    0.008028] Initializing cgroup subsys freezer
    [    0.008031] Initializing cgroup subsys net_cls
    [    0.008061] CPU: L1 I cache: 32K, L1 D cache: 32K
    [    0.008065] CPU: L2 cache: 2048K
    [    0.008071] mce: CPU supports 5 MCE banks
    [    0.008089] Performance Events: 
    [    0.008092] no APIC, boot with the "lapic" boot parameter to force-enable it.
    [    0.008095] no hardware sampling interrupt available.
    [    0.008098] p6 PMU driver.
    [    0.008124] ... version:                0
    [    0.008127] ... bit width:              32
    [    0.008129] ... generic registers:      2
    [    0.008132] ... value mask:             00000000ffffffff
    [    0.008135] ... max period:             000000007fffffff
    [    0.008138] ... fixed-purpose events:   0
    [    0.008140] ... event mask:             0000000000000003
    [    0.008146] Checking 'hlt' instruction... OK.
    [    0.024997] SMP alternatives: switching to UP code
    [    0.033766] Freeing SMP alternatives: 19k freed
    [    0.033777] ACPI: Core revision 20090903
    [    0.044162] ACPI: setting ELCR to 0200 (from 0440)
    [    0.048009] ftrace: converting mcount calls to 0f 1f 44 00 00
    [    0.048014] ftrace: allocating 21771 entries in 43 pages
    [    0.052079] Enabling APIC mode:  Flat.  Using 0 I/O APICs
    [    0.052084] weird, boot CPU (#0) not listed by the BIOS.
    [    0.052088] SMP motherboard not detected.
    [    0.052091] Local APIC not detected. Using dummy APIC emulation.
    [    0.052094] SMP disabled
    [    0.052239] Brought up 1 CPUs
    [    0.052242] Total of 1 processors activated (2997.85 BogoMIPS).
    [    0.053529] CPU0 attaching NULL sched-domain.
    [    0.053709] devtmpfs: initialized
    [    0.054159] regulator: core version 0.5
    [    0.054181] Time:  4:19:01  Date: 05/23/10
    [    0.054237] NET: Registered protocol family 16
    [    0.054385] EISA bus registered
    [    0.054396] ACPI: bus type pci registered
    [    0.056488] PCI: PCI BIOS revision 2.10 entry at 0xfd782, last bus=2
    [    0.056491] PCI: Using configuration type 1 for base access
    [    0.057686] bio: create slab <bio-0> at 0
    [    0.058527] ACPI: EC: Look up EC in DSDT
    [    0.064600] ACPI: EC: GPE storm detected, transactions will use polling mode
    [    0.192058] ACPI: Interpreter enabled
    [    0.192066] ACPI: (supports S0 S3 S4 S5)
    [    0.192089] ACPI: Using PIC for interrupt routing
    [    0.197476] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
    [    0.197545] ACPI: Power Resource [PFN0] (off)
    [    0.197587] ACPI: Power Resource [PFN1] (off)
    [    0.198248] ACPI: ACPI Dock Station Driver: 1 docks/bays found
    [    0.198983] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.199034] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff]
    [    0.199206] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
    [    0.199256] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
    [    0.199308] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
    [    0.199366] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000000-0xd00003ff]
    [    0.199421] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.199427] pci 0000:00:1d.7: PME# disabled
    [    0.199510] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
    [    0.199515] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
    [    0.199538] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
    [    0.199546] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
    [    0.199553] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
    [    0.199561] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
    [    0.199568] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
    [    0.199576] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
    [    0.199625] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
    [    0.199666] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
    [    0.199674] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
    [    0.199681] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0000c00-0xd0000dff]
    [    0.199689] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0000800-0xd00008ff]
    [    0.199717] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
    [    0.199722] pci 0000:00:1f.5: PME# disabled
    [    0.199750] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
    [    0.199757] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
    [    0.199792] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
    [    0.199797] pci 0000:00:1f.6: PME# disabled
    [    0.199834] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff]
    [    0.199841] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
    [    0.199848] pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
    [    0.199864] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
    [    0.199883] pci 0000:01:00.0: supports D1 D2
    [    0.199916] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
    [    0.199921] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
    [    0.199926] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
    [    0.199959] pci 0000:02:02.0: reg 10 32bit mmio: [0xd0204000-0xd0205fff]
    [    0.199985] pci 0000:02:02.0: reg 30 32bit mmio pref: [0x000000-0x003fff]
    [    0.200011] pci 0000:02:02.0: supports D1 D2
    [    0.200014] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.200019] pci 0000:02:02.0: PME# disabled
    [    0.200051] pci 0000:02:04.0: reg 10 32bit mmio: [0xd0208000-0xd0208fff]
    [    0.200094] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
    [    0.200098] pci 0000:02:04.0: PME# disabled
    [    0.200131] pci 0000:02:06.0: reg 10 32bit mmio: [0xd0209000-0xd0209fff]
    [    0.200149] pci 0000:02:06.0: supports D1 D2
    [    0.200152] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.200157] pci 0000:02:06.0: PME# disabled
    [    0.200189] pci 0000:02:06.2: reg 10 32bit mmio: [0xd020a000-0xd020a7ff]
    [    0.200197] pci 0000:02:06.2: reg 14 32bit mmio: [0xd0200000-0xd0203fff]
    [    0.200236] pci 0000:02:06.2: supports D1 D2
    [    0.200239] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
    [    0.200244] pci 0000:02:06.2: PME# disabled
    [    0.200274] pci 0000:02:06.3: reg 10 32bit mmio: [0xd0206000-0xd0207fff]
    [    0.200315] pci 0000:02:06.3: supports D1 D2
    [    0.200318] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
    [    0.200323] pci 0000:02:06.3: PME# disabled
    [    0.200359] pci 0000:00:1e.0: transparent bridge
    [    0.200364] pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff]
    [    0.200370] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xd05fffff]
    [    0.200398] pci_bus 0000:00: on NUMA node 0
    [    0.200403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.200577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    [    0.200604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [    0.203666] ACPI: PCI Interrupt Link [LNKA] (IRQs *6)
    [    0.203787] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
    [    0.203905] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
    [    0.204034] ACPI: PCI Interrupt Link [LNKD] (IRQs *6)
    [    0.204152] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
    [    0.204269] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
    [    0.204388] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled.
    [    0.204507] ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
    [    0.204627] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.204633] vgaarb: loaded
    [    0.204774] SCSI subsystem initialized
    [    0.204823] libata version 3.00 loaded.
    [    0.204907] usbcore: registered new interface driver usbfs
    [    0.204930] usbcore: registered new interface driver hub
    [    0.204964] usbcore: registered new device driver usb
    [    0.205115] ACPI: WMI: Mapper loaded
    [    0.205117] PCI: Using ACPI for IRQ routing
    [    0.205279] NetLabel: Initializing
    [    0.205282] NetLabel:  domain hash size = 128
    [    0.205284] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.205303] NetLabel:  unlabeled traffic allowed by default
    [    0.205338] Switching to clocksource tsc
    [    0.207812] AppArmor: AppArmor Filesystem Enabled
    [    0.207825] pnp: PnP ACPI init
    [    0.207840] ACPI: bus type pnp registered
    [    0.210001] pnp: PnP ACPI: found 9 devices
    [    0.210004] ACPI: ACPI bus type pnp unregistered
    [    0.210008] PnPBIOS: Disabled by ACPI PNP
    [    0.210022] system 00:04: ioport range 0x164e-0x164f has been reserved
    [    0.210028] system 00:04: ioport range 0x600-0x60f has been reserved
    [    0.210032] system 00:04: ioport range 0x700-0x70f has been reserved
    [    0.210036] system 00:04: ioport range 0x800-0x80f has been reserved
    [    0.210040] system 00:04: ioport range 0x1000-0x107f has been reserved
    [    0.210044] system 00:04: ioport range 0x1180-0x11bf has been reserved
    [    0.210048] system 00:04: ioport range 0x1c0-0x1cf has been reserved
    [    0.210053] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
    [    0.210057] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
    [    0.210061] system 00:04: ioport range 0x610-0x61f has been reserved
    [    0.210066] system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
    [    0.210071] system 00:04: iomem range 0xff800000-0xffbfffff has been reserved
    [    0.210075] system 00:04: iomem range 0xfff00000-0xffffffff could not be reserved
    [    0.210080] system 00:04: iomem range 0x0-0x9ffff could not be reserved
    [    0.210084] system 00:04: iomem range 0xe0000-0xfffff could not be reserved
    [    0.210089] system 00:04: iomem range 0xdf800-0xdffff could not be reserved
    [    0.244799] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    [    0.244804] pci 0000:00:01.0:   IO window: 0x3000-0x3fff
    [    0.244809] pci 0000:00:01.0:   MEM window: 0xd0100000-0xd01fffff
    [    0.244814] pci 0000:00:01.0:   PREFETCH window: 0xd8000000-0xdfffffff
    [    0.244823] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
    [    0.244827] pci 0000:02:06.0:   IO window: 0x004000-0x0040ff
    [    0.244832] pci 0000:02:06.0:   IO window: 0x004400-0x0044ff
    [    0.244837] pci 0000:02:06.0:   PREFETCH window: 0x10000000-0x13ffffff
    [    0.244843] pci 0000:02:06.0:   MEM window: 0x18000000-0x1bffffff
    [    0.244848] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
    [    0.244852] pci 0000:00:1e.0:   IO window: 0x4000-0x4fff
    [    0.244859] pci 0000:00:1e.0:   MEM window: 0xd0200000-0xd05fffff
    [    0.244864] pci 0000:00:1e.0:   PREFETCH window: 0x10000000-0x15ffffff
    [    0.244882] pci 0000:00:1e.0: setting latency timer to 64
    [    0.244892] pci 0000:02:06.0: enabling device (0104 -> 0107)
    [    0.245076] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
    [    0.245079] PCI: setting IRQ 10 as level-triggered
    [    0.245085] pci 0000:02:06.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
    [    0.245093] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.245097] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    [    0.245101] pci_bus 0000:01: resource 0 io:  [0x3000-0x3fff]
    [    0.245104] pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
    [    0.245108] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
    [    0.245112] pci_bus 0000:02: resource 0 io:  [0x4000-0x4fff]
    [    0.245116] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xd05fffff]
    [    0.245119] pci_bus 0000:02: resource 2 pref mem [0x10000000-0x15ffffff]
    [    0.245123] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
    [    0.245127] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
    [    0.245130] pci_bus 0000:03: resource 0 io:  [0x4000-0x40ff]
    [    0.245134] pci_bus 0000:03: resource 1 io:  [0x4400-0x44ff]
    [    0.245138] pci_bus 0000:03: resource 2 pref mem [0x10000000-0x13ffffff]
    [    0.245141] pci_bus 0000:03: resource 3 mem: [0x18000000-0x1bffffff]
    [    0.245177] NET: Registered protocol family 2
    [    0.245282] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.245608] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.245667] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.245726] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.245730] TCP reno registered
    [    0.245806] NET: Registered protocol family 1
    [    0.245885] pci 0000:01:00.0: Boot video device
    [    0.245945] Simple Boot Flag at 0x37 set to 0x1
    [    0.246019] cpufreq-nforce2: No nForce2 chipset.
    [    0.246044] Scanning for low memory corruption every 60 seconds
    [    0.246178] audit: initializing netlink socket (disabled)
    [    0.246194] type=2000 audit(1274588341.242:1): initialized
    [    0.260035] Trying to unpack rootfs image as initramfs...
    [    0.274903] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.282691] VFS: Disk quotas dquot_6.5.2
    [    0.282777] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.283575] fuse init (API version 7.13)
    [    0.283692] msgmni has been set to 470
    [    0.283955] alg: No test for stdrng (krng)
    [    0.284031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.284035] io scheduler noop registered
    [    0.284038] io scheduler anticipatory registered
    [    0.284040] io scheduler deadline registered
    [    0.284092] io scheduler cfq registered (default)
    [    0.284249] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.284280] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.284410] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
    [    0.298858] ACPI: Lid Switch [LID]
    [    0.298949] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
    [    0.298954] ACPI: Sleep Button [SLPB]
    [    0.299016] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [    0.299020] ACPI: Power Button [PWRF]
    [    0.299207] fan PNP0C0B:00: registered as cooling_device0
    [    0.299219] ACPI: Fan [FAN0] (off)
    [    0.299347] fan PNP0C0B:01: registered as cooling_device1
    [    0.299354] ACPI: Fan [FAN1] (off)
    [    0.299529] Marking TSC unstable due to TSC halts in idle
    [    0.299573] processor LNXCPU:00: registered as cooling_device2
    [    0.306742] Switching to clocksource acpi_pm
    [    0.336504] thermal LNXTHERM:01: registered as thermal_zone0
    [    0.336521] ACPI: Thermal Zone [THRM] (42 C)
    [    0.336607] ACPI: SBS HC: EC = 0xcf890420, offset = 0x18, query_bit = 0x20
    [    0.464450] ACPI: Smart Battery System [SBS0]: AC Adapter [AC0] (on-line)
    [    0.557518] Freeing initrd memory: 7771k freed
    [    0.884151] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery absent)
    [    1.168081] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT1] (battery absent)
    [    1.170032] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    1.170178] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
    [    1.170808] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
    [    1.170814] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
    [    1.170823] serial 0000:00:1f.6: PCI INT B disabled
    [    1.172172] brd: module loaded
    [    1.172804] loop: module loaded
    [    1.172918] input: Macintosh mouse button emulation as /devices/virtual/input/input3
    [    1.173061] ata_piix 0000:00:1f.1: version 2.13
    [    1.173086] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [    1.173093] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
    [    1.173303] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6
    [    1.173306] PCI: setting IRQ 6 as level-triggered
    [    1.173312] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6
    [    1.173366] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    1.173480] scsi0 : ata_piix
    [    1.173598] isapnp: Scanning for PnP cards...
    [    1.179114] scsi1 : ata_piix
    [    1.180386] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
    [    1.180390] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
    [    1.180872] Fixed MDIO Bus: probed
    [    1.180920] PPP generic driver version 2.4.2
    [    1.180981] tun: Universal TUN/TAP device driver, 1.6
    [    1.180984] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    1.181090] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.181300] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
    [    1.181306] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
    [    1.181326] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    1.181331] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    1.181378] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    1.181416] ehci_hcd 0000:00:1d.7: debug port 1
    [    1.185303] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    1.185574] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
    [    1.276562] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    1.276685] usb usb1: configuration #1 chosen from 1 choice
    [    1.276724] hub 1-0:1.0: USB hub found
    [    1.276735] hub 1-0:1.0: 6 ports detected
    [    1.276813] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.276832] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.277056] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
    [    1.277061] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6
    [    1.277068] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    1.277072] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    1.277114] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    1.277137] uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800
    [    1.277255] usb usb2: configuration #1 chosen from 1 choice
    [    1.277289] hub 2-0:1.0: USB hub found
    [    1.277299] hub 2-0:1.0: 2 ports detected
    [    1.277529] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
    [    1.277534] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6
    [    1.277541] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    1.277545] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    1.277585] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    1.277606] uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820
    [    1.277719] usb usb3: configuration #1 chosen from 1 choice
    [    1.277753] hub 3-0:1.0: USB hub found
    [    1.277761] hub 3-0:1.0: 2 ports detected
    [    1.277810] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6
    [    1.277817] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    1.277821] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    1.277864] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    1.277885] uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840
    [    1.278004] usb usb4: configuration #1 chosen from 1 choice
    [    1.278038] hub 4-0:1.0: USB hub found
    [    1.278047] hub 4-0:1.0: 2 ports detected
    [    1.278169] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
    [    1.282381] i8042.c: Detected active multiplexing controller, rev 1.1.
    [    1.283351] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.283359] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    1.283392] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    1.283420] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    1.283448] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    1.283585] mice: PS/2 mouse device common for all mice
    [    1.283788] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [    1.283806] rtc0: alarms up to one month, y3k, 242 bytes nvram
    [    1.283948] device-mapper: uevent: version 1.0.3
    [    1.284108] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    1.284177] device-mapper: multipath: version 1.1.0 loaded
    [    1.284181] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    1.284327] EISA: Probing bus 0 at eisa.0
    [    1.284334] Cannot allocate resource for EISA slot 1
    [    1.284338] Cannot allocate resource for EISA slot 2
    [    1.284341] Cannot allocate resource for EISA slot 3
    [    1.284344] Cannot allocate resource for EISA slot 4
    [    1.284362] EISA: Detected 0 cards.
    [    1.284469] cpuidle: using governor ladder
    [    1.284546] cpuidle: using governor menu
    [    1.285092] TCP cubic registered
    [    1.285303] NET: Registered protocol family 10
    [    1.285871] lo: Disabled Privacy Extensions
    [    1.286264] NET: Registered protocol family 17
    [    1.286711] Using IPI No-Shortcut mode
    [    1.286792] PM: Resume from disk failed.
    [    1.286806] registered taskstats version 1
    [    1.287031]   Magic number: 10:414:313
    [    1.287109] rtc_cmos 00:01: setting system clock to 2010-05-23 04:19:03 UTC (1274588343)
    [    1.287113] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.287115] EDD information not available.
    [    1.436770] hub 2-0:1.0: over-current change on port 1
    [    1.437308] ata2.00: ATAPI: Slimtype DVDRW SOSW-852S, PRS9, max UDMA/33
    [    1.437494] ata1.00: ATA-6: HTS541060G9AT00, MB3VA60A, max UDMA/100
    [    1.437498] ata1.00: 117210240 sectors, multi 16: LBA48 
    [    1.487439] ata2.00: configured for UDMA/33
    [    1.587125] isapnp: No Plug & Play device found
    [    1.587169] ata1.00: configured for UDMA/100
    [    1.587178] hub 2-0:1.0: over-current change on port 2
    [    1.587259] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
    [    1.589668] scsi 0:0:0:0: Direct-Access     ATA      HTS541060G9AT00  MB3V PQ: 0 ANSI: 5
    [    1.589805] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.589983] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
    [    1.590035] sd 0:0:0:0: [sda] Write Protect is off
    [    1.590039] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.590066] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.590331]  sda:
    [    1.590462] scsi 1:0:0:0: CD-ROM            Slimtype DVDRW SOSW-852S  PRS9 PQ: 0 ANSI: 5
    [    1.593472] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    [    1.593476] Uniform CD-ROM driver Revision: 3.20
    [    1.593568] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.593614] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [    1.616504]  sda1 sda2 < sda5 >
    [    1.645747] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.645762] Freeing unused kernel memory: 656k freed
    [    1.646173] Write protecting the kernel text: 4676k
    [    1.646213] Write protecting the kernel read-only data: 1840k
    [    1.666341] udev: starting version 151
    [    1.918883] ohci1394 0000:02:06.2: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
    [    1.980062] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[d020a000-d020a7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    [    1.980485] b44 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6
    [    2.040132] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
    [    2.040305] b44.c:v2.0
    [    2.060774] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:48:15:72
    [    2.192051] EXT4-fs (sda1): mounted filesystem with ordered data mode
    [    3.252166] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f00001e8486]
    [   10.205593] Adding 728056k swap on /dev/sda5.  Priority:-1 extents:1 across:728056k 
    [   10.436478] udev: starting version 151
    [   11.300656] type=1505 audit(1274588353.512:2):  operation="profile_load" pid=444 name="/sbin/dhclient3"
    [   11.301356] type=1505 audit(1274588353.512:3):  operation="profile_load" pid=444 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   11.301734] type=1505 audit(1274588353.512:4):  operation="profile_load" pid=444 name="/usr/lib/connman/scripts/dhclient-script"
    [   11.480478] acer-wmi: Acer Laptop ACPI-WMI Extras
    [   11.480496] acer-wmi: No or unsupported WMI interface, unable to load
    [   11.543035] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   11.569557] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input5
    [   11.569696] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    [   11.613769] intel_rng: FWH not detected
    [   11.706533] lib80211: common routines for IEEE802.11 drivers
    [   11.706538] lib80211_crypt: registered algorithm 'NULL'
    [   11.732528] ieee80211: 802.11 data/management/control stack, git-1.1.13
    [   11.732532] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
    [   11.882348] irda_init()
    [   11.882365] NET: Registered protocol family 23
    [   11.910057] Linux agpgart interface v0.103
    [   11.940618] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
    [   11.940674] nsc-ircc, chip->init
    [   11.940682] nsc-ircc, Found chip at base=0x164e
    [   11.940704] nsc-ircc, driver loaded (Dag Brattli)
    [   11.941186] nsc_ircc_open(), can't get iobase of 0x2f8
    [   11.941211] nsc-ircc, Found chip at base=0x164e
    [   11.941233] nsc-ircc, driver loaded (Dag Brattli)
    [   11.941236] nsc_ircc_open(), can't get iobase of 0x2f8
    [   11.941957] nsc-ircc 00:08: disabled
    [   11.954208] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
    [   11.978897] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [   12.036884] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
    [   12.036889] ipw2200: Copyright(c) 2003-2006 Intel Corporation
    [   12.036962] ipw2200 0000:02:04.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
    [   12.037025] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
    [   12.037069] ipw2200 0000:02:04.0: firmware: requesting ipw2200-bss.fw
    [   12.158161] [drm] Initialized drm 1.1.0 20060810
    [   12.178067] lp: driver loaded but no devices found
    [   12.368024] ipw2200: Radio Frequency Kill Switch is On:
    [   12.368028] Kill switch must be turned off for wireless networking to work.
    [   12.370817] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
    [   12.425376] tifm_7xx1 0000:02:06.3: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
    [   12.544961] yenta_cardbus 0000:02:06.0: CardBus bridge found [1025:0064]
    [   12.544977] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
    [   12.544982] yenta_cardbus 0000:02:06.0: Using CSCINT to route CSC interrupts to PCI
    [   12.544985] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
    [   12.544990] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01a21b22, devctl 0x64
    [   12.776550] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x08b8, PCI irq 10
    [   12.776555] yenta_cardbus 0000:02:06.0: Socket status: 30000006
    [   12.776560] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
    [   12.776570] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    [   12.776575] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: clean.
    [   12.776844] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff
    [   12.776848] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x10000000 - 0x15ffffff
    [   12.806658] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
    [   12.849347] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
    [   13.192632] [drm] radeon defaulting to kernel modesetting.
    [   13.192637] [drm] radeon kernel modesetting enabled.
    [   13.192705] radeon 0000:01:00.0: power state changed by ACPI to D0
    [   13.192718] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6
    [   13.213224] [drm] radeon: Initializing kernel modesetting.
    [   13.217735] [drm] register mmio base: 0xD0100000
    [   13.217739] [drm] register mmio size: 65536
    [   13.218902] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
    [   13.218919] [drm] Generation 2 PCI interface, using max accessible memory
    [   13.218928] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
    [   13.218946] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
    [   13.218979] radeon 0000:01:00.0: putting AGP V2 device into 1x mode
    [   13.219003] [drm] radeon: VRAM 64M
    [   13.219005] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
    [   13.219007] [drm] radeon: GTT 256M
    [   13.219010] [drm] radeon: GTT from 0xE0000000 to 0xEFFFFFFF
    [   13.219032] [drm] radeon: irq initialized.
    [   13.221771] [drm] Detected VRAM RAM=64M, BAR=128M
    [   13.221775] [drm] RAM width 128bits DDR
    [   13.224327] [TTM] Zone  kernel: Available graphics memory: 124788 kiB.
    [   13.224345] [drm] radeon: 64M of VRAM memory ready
    [   13.224348] [drm] radeon: 256M of GTT memory ready.
    [   13.224573] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
    [   13.224586] [drm] radeon: cp idle (0x10000C03)
    [   13.224658] [drm] Loading R300 Microcode
    [   13.224879] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
    [   13.378149] [drm] radeon: ring at 0x00000000E0000000
    [   13.378172] [drm] ring test succeeded in 1 usecs
    [   13.382423] [drm] radeon: ib pool ready.
    [   13.382506] [drm] ib test succeeded in 0 usecs
    [   13.383250] [drm] Panel ID String: QDS                     
    [   13.383253] [drm] Panel Size 1280x800
    [   13.383447] [drm] Default TV standard: NTSC
    [   13.383449] [drm] 27.000000000 MHz TV ref clk
    [   13.383453] [drm] Default TV standard: NTSC
    [   13.383455] [drm] 27.000000000 MHz TV ref clk
    [   13.384226] [drm] Radeon Display Connectors
    [   13.384229] [drm] Connector 0:
    [   13.384231] [drm]   VGA
    [   13.384234] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
    [   13.384236] [drm]   Encoders:
    [   13.384238] [drm]     CRT1: INTERNAL_DAC1
    [   13.384240] [drm] Connector 1:
    [   13.384242] [drm]   LVDS
    [   13.384244] [drm]   Encoders:
    [   13.384245] [drm]     LCD1: INTERNAL_LVDS
    [   13.384247] [drm] Connector 2:
    [   13.384249] [drm]   S-video
    [   13.384251] [drm]   Encoders:
    [   13.384253] [drm]     TV1: INTERNAL_DAC2
    [   13.432080] [drm] fb mappable at 0xD8040000
    [   13.432083] [drm] vram apper at 0xD8000000
    [   13.432085] [drm] size 4096000
    [   13.432087] [drm] fb depth is 24
    [   13.432088] [drm]    pitch is 5120
    [   13.432347] fb0: radeondrmfb frame buffer device
    [   13.432349] registered panic notifier
    [   13.432355] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
    [   13.469519] vga16fb: initializing
    [   13.469524] vga16fb: mapped to 0xc00a0000
    [   13.469528] vga16fb: not registering due to another framebuffer present
    [   13.917763] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
    [   13.919129] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
    [   13.920195] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    [   13.920702] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    [   13.921371] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    [   14.093667] Console: switching to colour frame buffer device 160x50
    [   15.440696] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
    [   15.440724] Intel ICH 0000:00:1f.5: setting latency timer to 64
    [   16.452031] ALSA intel8x0.c:2435: codec_ready: codec is not ready [0x700000]
    [   16.452243] Intel ICH 0000:00:1f.5: PCI INT B disabled
    [   16.452262] Intel ICH: probe of 0000:00:1f.5 failed with error -5
    [   17.387089] type=1505 audit(1274588359.596:5):  operation="profile_load" pid=680 name="/usr/share/gdm/guest-session/Xsession"
    [   17.390607] type=1505 audit(1274588359.600:6):  operation="profile_replace" pid=682 name="/sbin/dhclient3"
    [   17.391313] type=1505 audit(1274588359.600:7):  operation="profile_replace" pid=682 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   17.396274] type=1505 audit(1274588359.608:8):  operation="profile_replace" pid=682 name="/usr/lib/connman/scripts/dhclient-script"
    [   17.452796] type=1505 audit(1274588359.664:9):  operation="profile_load" pid=684 name="/usr/bin/evince"
    [   17.464084] type=1505 audit(1274588359.676:10):  operation="profile_load" pid=684 name="/usr/bin/evince-previewer"
    [   17.470276] type=1505 audit(1274588359.680:11):  operation="profile_load" pid=684 name="/usr/bin/evince-thumbnailer"
    [   17.516852] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   17.526969] type=1505 audit(1274588359.736:12):  operation="profile_load" pid=749 name="/usr/lib/cups/backend/cups-pdf"
    [   17.528503] type=1505 audit(1274588359.740:13):  operation="profile_load" pid=749 name="/usr/sbin/cupsd"
    [   17.579673] type=1505 audit(1274588359.788:14):  operation="profile_load" pid=752 name="/usr/sbin/tcpdump"
    [   24.970537] ttyS1: LSR safety check engaged!
    [   40.837228] ppdev: user-space parallel port driver
    I am so sorry it took long, I am from Asia. ^^ I posted the problem in the morning, then I slept, I just woke up. please help me.

  4. #4
    Join Date
    May 2010
    Beans
    73
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Sound NOT Working on UBUNTU 10.04 [Installed using Boot CD]

    anyone there??

  5. #5
    Join Date
    Jan 2008
    Beans
    14

    Re: Sound NOT Working on UBUNTU 10.04 [Installed using Boot CD]

    Well, your problems seems here:

    15.440696] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
    [ 15.440724] Intel ICH 0000:00:1f.5: setting latency timer to 64
    [ 16.452031] ALSA intel8x0.c:2435: codec_ready: codec is not ready [0x700000]
    [ 16.452243] Intel ICH 0000:00:1f.5: PCI INT B disabled
    [ 16.452262] Intel ICH: probe of 0000:00:1f.5 failed with error -5

    Let me search something useful of that

    EDIT:

    Try that: http://ubuntuforums.org/showpost.php...6&postcount=12
    Last edited by waltercool; May 23rd, 2010 at 07:44 AM.

  6. #6
    Join Date
    May 2010
    Beans
    73
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Sound NOT Working on UBUNTU 10.04 [Installed using Boot CD]

    I'll try that. Thanks for the rep. I will private message you and reply here if it works or not. thanks.

  7. #7
    Join Date
    May 2010
    Beans
    73
    Distro
    Ubuntu 11.04 Natty Narwhal

    Unhappy Re: Sound NOT Working on UBUNTU 10.04 [Installed using Boot CD]

    I tried the things posted in the link you gave me. However, the commands had errors.

    sudo get clean && sudo apt-get autoremove
    Code:
    gio@Ubuntu:~$ sudo get clean && sudo apt-get autoremove 
    [sudo] password for gio: 
    sudo: get: command not found
    gio@Ubuntu:~$
    so I tried it separately.

    sudo get clean
    Code:
    gio@Ubuntu:~$ sudo get clean
    sudo: get: command not found
    gio@Ubuntu:~$
    sudo apt-get autoremove
    Code:
    gio@Ubuntu:~$ sudo apt-get autoremove
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
    gio@Ubuntu:~$
    After doing all of the comands :

    sudo apt-get remove --purge alsa-base

    sudo apt-get remove --purge pulseaudio

    sudo get clean && sudo apt-get autoremove

    sudo apt-get install alsa-base

    sudo apt-get install pulseaudio
    I rebooted and see if anything changed.

    The only thing I see that changed was that the speaker icon is no longer in the panel, but it still works when I go to System>Preferences>Sound.

    Also when I reboot, the error:
    Code:
    [   16.452031] ALSA intel8x0.c:2435: codec_ready: codec is not ready  [0x700000]
    is still there.

    is there any solutions you got? I will do anything to get my sound to work.

  8. #8
    Join Date
    May 2010
    Beans
    73
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Sound NOT Working on UBUNTU 10.04 [Installed using Boot CD]

    bump

  9. #9
    Join Date
    May 2010
    Beans
    73
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Sound NOT Working on UBUNTU 10.04 [Installed using Boot CD]

    bump. .. . .

  10. #10
    Join Date
    May 2008
    Location
    Ohio, USA
    Beans
    6,904
    Distro
    Ubuntu Gnome 14.04 Trusty Tahr

    Re: Sound NOT Working on UBUNTU 10.04 [Installed using Boot CD]

    Using a Terminal="Applications->Accessories->Terminal"
    Code:
    rm -r ~/.pulse ~/.asound* 
    sudo rm /etc/asound.conf
    Logout/in.

    Try
    Code:
    aplay -l
    again. Same result? Do this:
    Using a Terminal="Applications->Accessories->Terminal"
    Code:
    sudo apt-get update
    sudo apt-get upgrade
    Code:
    sudo apt-get install --reinstall alsa-utils alsa-oss alsa-base libasound2 libasound2-plugins linux-sound-base gstreamer0.10-alsa
    Reboot.

Page 1 of 6 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •