Page 69 of 121 FirstFirst ... 1959676869707179119 ... LastLast
Results 681 to 690 of 1210

Thread: Comprehensive ndiswrapper troubleshooting guide

  1. #681
    Join Date
    Jan 2010
    Location
    NY
    Beans
    32
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Comprehensive ndiswrapper troubleshooting guide

    sorry.

  2. #682
    Join Date
    Jan 2010
    Location
    NY
    Beans
    32
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Comprehensive ndiswrapper troubleshooting guide

    lsmod | grep ndis =

    ndiswrapper 185404 0

    sudo modprobe ndiswrapper =

    WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.

    dmesg | grep -e ndis -e wlan =

    [ 13.707378] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
    [ 14.325428] ndiswrapper: driver neta5agu (D-Link,05/08/2006,1.5.202.2) loaded
    [ 14.327103] ndiswrapper (ZwQueryValueKey:2329): not fully implemented (yet)
    [ 15.025091] wlan0: ethernet device 00:1c:f0:d9:5c:50 using NDIS driver: neta5agu, version: 0x10005, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 07D1:3A08.F.conf
    [ 15.085125] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
    [ 15.085233] usbcore: registered new interface driver ndiswrapper
    [ 20.072889] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 57.408632] ndiswrapper (iw_set_auth:1602): invalid cmd 12
    [ 59.522340] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 70.512026] wlan0: no IPv6 routers present

    sudo iwlist scan =

    lo Interface doesn't support scanning.

    wlan0 Scan completed :
    Cell 01 - Address: 00:13:10:09:3E:53
    ESSID:"kinneysssid"
    Protocol:IEEE 802.11g
    Mode:Managed
    Frequency:2.437 GHz (Channel 6)
    Quality:20/100 Signal level:-83 dBm Noise level:-96 dBm
    Encryption key:on
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
    24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
    12 Mb/s; 48 Mb/s
    Extra:bcn_int=100
    Extra:atim=0
    Cell 02 - Address: 00:0F:66:43:A3:26
    ESSID:"hilger2"
    Protocol:IEEE 802.11g
    Mode:Managed
    Frequency:2.437 GHz (Channel 6)
    Quality:9/100 Signal level:-90 dBm Noise level:-96 dBm
    Encryption key:on
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
    24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
    12 Mb/s; 48 Mb/s
    Extra:bcn_int=100
    Extra:atim=0
    IE: WPA Version 1
    Group Cipher : TKIP
    Pairwise Ciphers (1) : TKIP
    Authentication Suites (1) : PSK
    Cell 03 - Address: 00:18:D1:30:5F:87
    ESSID:"hoodnet"
    Protocol:IEEE 802.11g
    Mode:Managed
    Frequency:2.422 GHz (Channel 3)
    Quality:54/100 Signal level:-61 dBm Noise level:-96 dBm
    Encryption key:on
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
    6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
    36 Mb/s; 48 Mb/s; 54 Mb/s
    Extra:bcn_int=200
    Extra:atim=0
    Cell 04 - Address: 00:18:F8:C9:8E:32
    ESSID:"Steelers#1"
    Protocol:IEEE 802.11g
    Mode:Managed
    Frequency:2.437 GHz (Channel 6)
    Quality:7/100 Signal level:-91 dBm Noise level:-96 dBm
    Encryption key:on
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
    24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
    12 Mb/s; 48 Mb/s
    Extra:bcn_int=100
    Extra:atim=0
    Cell 05 - Address: 00:0F:66:02:CB:C5
    ESSID:"gandjcpa"
    Protocol:IEEE 802.11g
    Mode:Managed
    Frequency:2.437 GHz (Channel 6)
    Quality:4/100 Signal level:-93 dBm Noise level:-96 dBm
    Encryption key:on
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
    24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
    12 Mb/s; 48 Mb/s
    Extra:bcn_int=100
    Extra:atim=0
    Cell 06 - Address: 00:1B:2F:E1:D4:74
    ESSID:"ENDORA"
    Protocol:IEEE 802.11g
    Mode:Managed
    Frequency:2.437 GHz (Channel 6)
    Quality:7/100 Signal level:-91 dBm Noise level:-96 dBm
    Encryption key:on
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
    12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s
    48 Mb/s; 54 Mb/s
    Extra:bcn_int=100
    Extra:atim=0
    IE: WPA Version 1
    Group Cipher : TKIP
    Pairwise Ciphers (1) : TKIP
    Authentication Suites (1) : PSK
    Cell 07 - Address: 00:18:39:C3:F9:FE
    ESSID:"linksys4"
    Protocol:IEEE 802.11g
    Mode:Managed
    Frequency:2.437 GHz (Channel 6)
    Quality:4/100 Signal level:-93 dBm Noise level:-96 dBm
    Encryption key:off
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
    24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
    12 Mb/s; 48 Mb/s
    Extra:bcn_int=100
    Extra:atim=0

    Looking at quality, you can probably tell which is my network.
    A box popped up saying that I wasn't connected to anything on my linux!
    That's new!

  3. #683
    Join Date
    Aug 2007
    Location
    Paris
    Beans
    5,538
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Comprehensive ndiswrapper troubleshooting guide

    This all looks good. If you left-click on the NetworkManager icon in your system tray (which by default is in the top-right corner of your screen), you should see a list of networks. Click yours to connect to it. Does this work?

  4. #684
    Join Date
    Jan 2010
    Location
    NY
    Beans
    32
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Comprehensive ndiswrapper troubleshooting guide

    I opened NetworkManager, but i see no neworks there.

  5. #685
    Join Date
    Jan 2010
    Location
    NY
    Beans
    32
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Comprehensive ndiswrapper troubleshooting guide

    It now shows networks but won't connect to them. I type in the wep key, and it just waits a few seconds then asks again.

  6. #686
    Join Date
    Aug 2007
    Location
    Paris
    Beans
    5,538
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Comprehensive ndiswrapper troubleshooting guide

    You may have better luck connecting with wicd instead of NetworkManager. wicd is another connection manager that works better in some cases. To install it, search for it in the Software Center or just type in a terminal:

    Code:
    sudo apt-get install wicd
    After it installs, launch it from the Applications>Internet menu. Please let me know if you're able to complete the connection with wicd. (Also note that in wicd, you have to enter your WEP key before pressing connect. If you can't find the place to do that, let me know.)

  7. #687
    Join Date
    Jan 2010
    Location
    NY
    Beans
    32
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Comprehensive ndiswrapper troubleshooting guide

    I can't use the installer, because i don't have a connection!
    Edit: Is there a way i can get it on my XP then transfer it?

  8. #688
    Join Date
    Jan 2010
    Location
    NY
    Beans
    32
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Comprehensive ndiswrapper troubleshooting guide


  9. #689
    Join Date
    Aug 2007
    Location
    Paris
    Beans
    5,538
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Comprehensive ndiswrapper troubleshooting guide

    Ah, yes, sorry for not thinking of that. Yes, you can download the package from one of the mirrors at http://packages.ubuntu.com/karmic/all/wicd/download and double-click to install it.

  10. #690
    Join Date
    Jan 2010
    Location
    NY
    Beans
    32
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Comprehensive ndiswrapper troubleshooting guide

    I can't install because it says: Dependancy of python-urwid not satisfiable.

Page 69 of 121 FirstFirst ... 1959676869707179119 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •