Code:
amy@amy-desktop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fcf0000 (usable)
[ 0.000000] BIOS-e820: 000000001fcf0000 - 000000001fcfc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fcfc000 - 000000001fd00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fd00000 - 000000001fe80000 (usable)
[ 0.000000] BIOS-e820: 000000001fe80000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130688) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130688
[ 0.000000] HighMem 130688 -> 130688
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130688
[ 0.000000] On node 0 totalpages: 130688
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125603 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6670 checksum 0
[ 0.000000] ACPI: RSDP 000F6670, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1FCF7082, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1FCFBF0A, 0074 (r1 INTEL Whitney 6040000 PTL F4240)
[ 0.000000] ACPI: DSDT 1FCF70B2, 4E58 (r1 INTEL Whitney 6040000 MSFT 100000D)
[ 0.000000] ACPI: FACS 1FCFCFC0, 0040
[ 0.000000] ACPI: APIC 1FCFBF7E, 005A (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 1FCFBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:11 APIC version 17
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 000000001fcf0000 - 000000001fcfc000
[ 0.000000] swsusp: Registered nosave memory region: 000000001fcfc000 - 000000001fd00000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129667
[ 0.000000] Kernel command line: root=UUID=6728fb9c-a191-427e-b2e7-693b7165cc11 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1295.700 MHz processor.
[ 15.122742] Console: colour VGA+ 80x25
[ 15.122750] console [tty0] enabled
[ 15.123968] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.125492] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.172953] Memory: 506116k/522752k available (2177k kernel code, 15948k reserved, 1006k data, 368k init, 0k highmem)
[ 15.172969] virtual kernel memory layout:
[ 15.172971] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 15.172973] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.172975] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 15.172978] lowmem : 0xc0000000 - 0xdfe80000 ( 510 MB)
[ 15.172980] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 15.172982] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)
[ 15.172984] .text : 0xc0100000 - 0xc0320474 (2177 kB)
[ 15.172990] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.173069] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 15.253072] Calibrating delay using timer specific routine.. 2593.53 BogoMIPS (lpj=5187072)
[ 15.253130] Security Framework initialized
[ 15.253148] SELinux: Disabled at boot.
[ 15.253178] AppArmor: AppArmor initialized
[ 15.253186] Failure registering capabilities with primary security module.
[ 15.253202] Mount-cache hash table entries: 512
[ 15.253448] Initializing cgroup subsys ns
[ 15.253456] Initializing cgroup subsys cpuacct
[ 15.253475] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 15.253494] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 15.253499] CPU: L2 cache: 256K
[ 15.253504] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
[ 15.253522] Compat vDSO mapped to ffffe000.
[ 15.253547] Checking 'hlt' instruction... OK.
[ 15.269614] SMP alternatives: switching to UP code
[ 15.272226] Freeing SMP alternatives: 11k freed
[ 15.272491] Early unpacking initramfs... done
[ 15.903952] ACPI: Core revision 20070126
[ 15.904239] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 16.001042] CPU0: Intel(R) Celeron(TM) CPU 1300MHz stepping 01
[ 16.001102] Total of 1 processors activated (2593.53 BogoMIPS).
[ 16.001257] ENABLING IO-APIC IRQs
[ 16.001473] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 16.148910] Brought up 1 CPUs
[ 16.148972] CPU0 attaching sched-domain:
[ 16.148978] domain 0: span 01
[ 16.148982] groups: 01
[ 16.149475] net_namespace: 64 bytes
[ 16.149495] Booting paravirtualized kernel on bare hardware
[ 16.150482] Time: 20:31:05 Date: 07/29/08
[ 16.150569] NET: Registered protocol family 16
[ 16.151025] EISA bus registered
[ 16.151072] ACPI: bus type pci registered
[ 16.152079] PCI: PCI BIOS revision 2.10 entry at 0xfd9a8, last bus=1
[ 16.152087] PCI: Using configuration type 1
[ 16.152114] Setting up standard PCI resources
[ 16.159555] ACPI: EC: Look up EC in DSDT
[ 16.165067] ACPI: Interpreter enabled
[ 16.165080] ACPI: (supports S0 S1 S3 S4 S5)
[ 16.165105] ACPI: Using IOAPIC for interrupt routing
[ 16.169629] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.169952] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 16.169959] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 16.170524] PCI: Transparent bridge - 0000:00:1e.0
[ 16.170564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.170907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 16.173239] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 16.173369] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 16.173487] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 16.173603] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 16.173839] ACPI: Power Resource [FN01] (on)
[ 16.173935] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.174010] pnp: PnP ACPI init
[ 16.174032] ACPI: bus type pnp registered
[ 16.199108] pnp: PnP ACPI: found 12 devices
[ 16.199117] ACPI: ACPI bus type pnp unregistered
[ 16.199126] PnPBIOS: Disabled by ACPI PNP
[ 16.199601] PCI: Using ACPI for IRQ routing
[ 16.199608] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.216781] NET: Registered protocol family 8
[ 16.216786] NET: Registered protocol family 20
[ 16.216958] AppArmor: AppArmor Filesystem Enabled
[ 16.220762] Time: tsc clocksource has been installed.
[ 16.228851] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 16.228857] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 16.228863] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 16.228867] system 00:01: ioport range 0x600-0x67f has been reserved
[ 16.228872] system 00:01: ioport range 0xfe00-0xfe0f has been reserved
[ 16.228880] system 00:01: iomem range 0xff800000-0xffffffff could not be reserved
[ 16.228885] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
[ 16.228890] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 16.228907] system 00:02: iomem range 0x0-0x9ffff could not be reserved
[ 16.228912] system 00:02: iomem range 0xe0000-0xfffff could not be reserved
[ 16.228917] system 00:02: iomem range 0x100000-0x1fffffff could not be reserved
[ 16.259745] PCI: Bridge: 0000:00:1e.0
[ 16.259753] IO window: 2000-2fff
[ 16.259762] MEM window: d0100000-d1ffffff
[ 16.259768] PREFETCH window: e0000000-efffffff
[ 16.259788] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 16.259822] NET: Registered protocol family 2
[ 16.296922] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 16.297368] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 16.297848] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 16.298466] TCP: Hash tables configured (established 16384 bind 16384)
[ 16.298474] TCP reno registered
[ 16.309152] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 16.779269] it is
[ 17.451082] Freeing initrd memory: 7308k freed
[ 17.451730] Simple Boot Flag at 0x35 set to 0x1
[ 17.452843] audit: initializing netlink socket (disabled)
[ 17.452881] audit(1217363465.084:1): initialized
[ 17.457486] VFS: Disk quotas dquot_6.5.1
[ 17.457702] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.458118] io scheduler noop registered
[ 17.458128] io scheduler anticipatory registered
[ 17.458131] io scheduler deadline registered
[ 17.458166] io scheduler cfq registered (default)
[ 17.458236] Boot video device is 0000:01:0b.0
[ 17.458828] isapnp: Scanning for PnP cards...
[ 17.812887] isapnp: No Plug & Play device found
[ 17.884764] Real Time Clock Driver v1.12ac
[ 17.884976] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.885169] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.886530] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.888217] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.888374] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 17.888688] PNP: No PS/2 controller found. Probing ports directly.
[ 17.891779] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.891791] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.892519] mice: PS/2 mouse device common for all mice
[ 17.892777] EISA: Probing bus 0 at eisa.0
[ 17.892792] Cannot allocate resource for EISA slot 1
[ 17.892797] Cannot allocate resource for EISA slot 2
[ 17.892825] EISA: Detected 0 cards.
[ 17.892831] cpuidle: using governor ladder
[ 17.892834] cpuidle: using governor menu
[ 17.893190] NET: Registered protocol family 1
[ 17.893262] Using IPI No-Shortcut mode
[ 17.893340] registered taskstats version 1
[ 17.893537] Magic number: 0:785:549
[ 17.893762] hash matches device PNP0C0F:00
[ 17.893773] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 17.893777] EDD information not available.
[ 17.895166] Freeing unused kernel memory: 368k freed
[ 19.389244] fuse init (API version 7.9)
[ 19.432221] ACPI: Fan [FAN1] (on)
[ 19.446599] ACPI: Invalid PBLK length [5]
[ 19.451611] ACPI: Thermal Zone [THRM] (-273 C)
[ 20.189199] SCSI subsystem initialized
[ 20.235059] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 20.235169] 8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 20.235177] 8139cp 0000:01:06.0: Try the "8139too" driver instead.
[ 20.251061] 8139too Fast Ethernet driver 0.9.28
[ 20.251206] PCI: Enabling device 0000:01:06.0 (0100 -> 0103)
[ 20.251229] ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 20.252034] eth0: RealTek RTL8139 at 0x2000, 00:40:2b:1c:0b:49, IRQ 16
[ 20.252038] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 20.355188] usbcore: registered new interface driver usbfs
[ 20.355241] usbcore: registered new interface driver hub
[ 20.395016] usbcore: registered new device driver usb
[ 20.435700] USB Universal Host Controller Interface driver v3.0
[ 20.435887] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 16
[ 20.435908] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 20.435916] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 20.436519] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 20.436568] uhci_hcd 0000:00:1f.2: irq 16, io base 0x000010a0
[ 20.436886] usb usb1: configuration #1 chosen from 1 choice
[ 20.436932] hub 1-0:1.0: USB hub found
[ 20.436945] hub 1-0:1.0: 2 ports detected
[ 20.451006] libata version 3.00 loaded.
[ 20.539868] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.590857] ata_piix 0000:00:1f.1: version 2.12
[ 20.590980] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.610863] scsi0 : ata_piix
[ 20.626827] scsi1 : ata_piix
[ 20.628023] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x1080 irq 14
[ 20.628029] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x1088 irq 15
[ 20.786758] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 20.791323] ata1.00: ATA-6: ST340810A, 3.39, max UDMA/100
[ 20.791332] ata1.00: 78165360 sectors, multi 16: LBA
[ 20.807238] ata1.00: configured for UDMA/66
[ 20.937615] usb 1-2: configuration #1 chosen from 1 choice
[ 20.940516] hub 1-2:1.0: USB hub found
[ 20.942422] hub 1-2:1.0: 4 ports detected
[ 21.019044] Floppy drive(s): fd0 is 1.44M
[ 21.038358] FDC 0 is a post-1991 82077
[ 21.162954] ata2.00: ATAPI: Hewlett-Packard CD-Writer cd16f, 1.1D, max UDMA/33
[ 21.252233] usb 1-2.1: new low speed USB device using uhci_hcd and address 3
[ 21.350881] ata2.00: configured for UDMA/33
[ 21.351202] scsi 0:0:0:0: Direct-Access ATA ST340810A 3.39 PQ: 0 ANSI: 5
[ 21.356160] scsi 1:0:0:0: CD-ROM HP CD-Writer cd16f 1.1D PQ: 0 ANSI: 5
[ 21.383360] usb 1-2.1: configuration #1 chosen from 1 choice
[ 21.592049] usb 1-2.2: new low speed USB device using uhci_hcd and address 4
[ 21.712226] usb 1-2.2: configuration #1 chosen from 1 choice
[ 22.396230] Driver 'sd' needs updating - please use bus_type methods
[ 22.399636] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 22.399673] sd 0:0:0:0: [sda] Write Protect is off
[ 22.399679] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.399715] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.399831] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 22.399850] sd 0:0:0:0: [sda] Write Protect is off
[ 22.399855] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.399887] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.399897] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 22.422625] sda1 sda2 < sda5 >
[ 22.459211] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.470023] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 22.470037] Uniform CD-ROM driver Revision: 3.20
[ 22.470154] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 22.500614] usbcore: registered new interface driver hiddev
[ 22.505664] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.505710] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 22.515649] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2.1/1-2.1:1.0/input/input1
[ 22.526149] input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1f.2-2.1
[ 22.539052] input: HID 1267:0103 as /devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input2
[ 22.550113] input,hidraw1: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1f.2-2.2
[ 22.570745] input: HID 1267:0103 as /devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input3
[ 22.582147] input,hidraw2: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1f.2-2.2
[ 22.582195] usbcore: registered new interface driver usbhid
[ 22.582204] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 23.270732] Attempting manual resume
[ 23.270741] swsusp: Resume From Partition 8:5
[ 23.270745] PM: Checking swsusp image.
[ 23.271120] PM: Resume from disk failed.
[ 23.345209] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 23.345224] EXT3-fs: write access will be enabled during recovery.
[ 24.457296] kjournald starting. Commit interval 5 seconds
[ 24.457346] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 24.457361] ext3_orphan_cleanup: deleting unreferenced inode 1433616
[ 24.457439] EXT3-fs: sda1: 1 orphan inode deleted
[ 24.457443] EXT3-fs: recovery complete.
[ 24.480892] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.123433] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 38.438997] Linux agpgart interface v0.102
[ 38.539745] intel_rng: FWH not detected
[ 38.695328] agpgart: Detected an Intel i810 Chipset.
[ 38.700320] agpgart: detected 4MB dedicated video ram.
[ 38.725789] agpgart: AGP aperture is 64M @ 0xd4000000
[ 38.786868] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.046827] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.114673] iTCO_vendor_support: vendor-support=0
[ 39.170645] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 39.170848] iTCO_wdt: Found a ICH TCO device (Version=1, TCOBASE=0x1060)
[ 39.170904] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.250744] i810_smbus 0000:00:01.0: i810/i815 i2c device found.
[ 39.643081] input: Power Button (FF) as /devices/virtual/input/input5
[ 39.654429] ACPI: Power Button (FF) [PWRF]
[ 39.654776] input: Power Button (CM) as /devices/virtual/input/input6
[ 39.670374] ACPI: Power Button (CM) [PWRB]
[ 40.442731] parport_pc 00:08: reported by Plug and Play ACPI
[ 40.442802] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 42.308535] nvidia: module license 'NVIDIA' taints kernel.
[ 43.889562] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 43.889595] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 44.560262] intel8x0_measure_ac97_clock: measured 54545 usecs
[ 44.560274] intel8x0: clocking to 48000
[ 44.561620] ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 44.562579] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 48.326679] lp0: using parport0 (interrupt-driven).
[ 48.390046] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[ 48.481958] ndiswrapper: driver wg311v3 (NETGEAR,02/22/2005,3.1.1.7) loaded
[ 48.482596] PCI: Enabling device 0000:01:0e.0 (0100 -> 0102)
[ 48.482624] ACPI: PCI Interrupt 0000:01:0e.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 48.491100] ndiswrapper: using IRQ 19
[ 48.775280] wlan0: ethernet device 00:1e:2a:b0:39:bf using NDIS driver: wg311v3, version: 0x3000036, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 11AB:1FAA.5.conf
[ 48.775328] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 48.775465] usbcore: registered new interface driver ndiswrapper
[ 48.913979] Adding 1502036k swap on /dev/sda5. Priority:-1 extents:1 across:1502036k
[ 49.433408] NET: Registered protocol family 17
[ 49.712126] EXT3 FS on sda1, internal journal
[ 51.456662] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 51.575236] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 53.638421] No dock devices found.
[ 55.603724] apm: BIOS not found.
[ 55.782367] ppdev: user-space parallel port driver
[ 56.080782] audit(1217363504.979:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4886 profile="/usr/sbin/cupsd" namespace="default"
[ 57.713987] Bluetooth: Core ver 2.11
[ 57.715549] NET: Registered protocol family 31
[ 57.715560] Bluetooth: HCI device and connection manager initialized
[ 57.715569] Bluetooth: HCI socket layer initialized
[ 57.828971] Bluetooth: L2CAP ver 2.9
[ 57.828984] Bluetooth: L2CAP socket layer initialized
[ 57.925476] Bluetooth: RFCOMM socket layer initialized
[ 57.925989] Bluetooth: RFCOMM TTY layer initialized
[ 57.925997] Bluetooth: RFCOMM ver 1.8
[ 59.312943] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 69.293379] NET: Registered protocol family 10
[ 69.294723] lo: Disabled Privacy Extensions
[ 79.641309] wlan0: no IPv6 routers present
[ 79.881338] eth0: no IPv6 routers present
[ 325.214175] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 345.877832] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 351.597345] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 356.586701] wlan0: no IPv6 routers present
[ 369.540213] eth0: no IPv6 routers present
[ 1064.490610] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1073.059932] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1083.325777] wlan0: no IPv6 routers present
[ 1090.734065] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Bookmarks