Results 1 to 4 of 4

Thread: MIC setup with PulseAudio

  1. #1
    Join Date
    Apr 2005
    Location
    C A N A DA
    Beans
    268
    Distro
    Ubuntu

    MIC setup with PulseAudio

    hi all,

    I managed to get my 2 sound cards configured for Pulse usage! w00t

    So now I have my 4.1 speakers working properly with my Audigy2 card!

    My prob now is that I'm trying to get my second sound card (the on-board one) to work strictly for my headset.
    When I go to the sound options I can only get it to work if I select OSS. Shouldn't Pulse manage it now? I've tried setting it to pulse, however it doesn't work no matter what option I select in the drop down. (see attachments)

    here are my config files:

    /etc/asound.conf
    Code:
    pcm.pulse {
        type pulse
    }
    
    ctl.pulse {
        type pulse
    }
    
    pcm.!default {
        type pulse
    }
    ctl.!default {
        type pulse
    }
    
    pcm.headset {
            type hw
            card 0
    }
    
    ctl.headset {
            type hw
            card 0
    }
    /etc/pulse/default.pa
    Code:
    #!/usr/bin/pulseaudio -nF
    #
    # This file is part of PulseAudio.
    #
    # PulseAudio is free software; you can redistribute it and/or modify it
    # under the terms of the GNU Lesser General Public License as published by
    # the Free Software Foundation; either version 2 of the License, or
    # (at your option) any later version.
    #
    # PulseAudio is distributed in the hope that it will be useful, but
    # WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
    # General Public License for more details.
    #
    # You should have received a copy of the GNU Lesser General Public License
    # along with PulseAudio; if not, write to the Free Software Foundation,
    # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
    
    .nofail
    
    ### Load something into the sample cache
    #load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
    load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
    #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
    #load-sample-lazy pulse-access /usr/share/sounds/generic.wav
    
    .fail
    
    ### Load audio drivers statically (it's probably better to not load
    ### these drivers manually, but instead use module-hal-detect --
    ### see below -- for doing this automatically)
    #load-module module-alsa-source device=hw:1,0
    #load-module module-oss device="/dev/dsp" sink_name=output source_name=input
    #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
    #load-module module-null-sink
    #load-module module-pipe-sink
    load-module module-alsa-sink device=surround41:Audigy2 sink_name=Audigy2 channels=5 channel_map=front-left,front-right,rear-left,rear-right,lfe
    load-module module-alsa-source device=hw:Audigy2
    load-module module-alsa-sink device=front:ICH5 sink_name=ICH5
    load-module module-alsa-source device=hw:ICH5
    
    ### Automatically load driver modules depending on the hardware available
    #.ifexists module-hal-detect.so
    #load-module module-hal-detect
    #.else
    ### Alternatively use the static hardware detection module (for systems that
    ### lack HAL support)
    #load-module module-detect
    #.endif
    #load-module module-alsa-sink device_id=0 channels=5 channel_map=front-left,front-right,rear-left,rear-right,lfe
    
    ### Load several protocols
    .ifexists module-esound-protocol-unix.so
    load-module module-esound-protocol-unix
    .endif
    load-module module-native-protocol-unix
    
    ### Network access (may be configured with paprefs, so leave this commented
    ### here if you plan to use paprefs)
    #load-module module-esound-protocol-tcp
    #load-module module-native-protocol-tcp
    #load-module module-zeroconf-publish
    
    ### Load the RTP reciever module (also configured via paprefs, see above)
    #load-module module-rtp-recv
    
    ### Load the RTP sender module (also configured via paprefs, see above)
    #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
    #load-module module-rtp-send source=rtp.monitor
    
    ### Automatically restore the volume of playback streams
    load-module module-volume-restore
    
    ### Automatically restore the default sink/source when changed by the user during runtime
    load-module module-default-device-restore
    
    ### Automatically move streams to the default sink if the sink they are
    ### connected to dies, similar for sources
    load-module module-rescue-streams
    
    ### Automatically suspend sinks/sources that become idle for too long
    load-module module-suspend-on-idle
    
    ### Load X11 bell module
    #load-module module-x11-bell sample=x11-bell
    
    ### Register ourselves in the X11 session manager
    # Deactivated by default, to avoid deadlock when PA is started as esd from gnome-session
    # Instead we load this via /etc/xdg/autostart/ and "pactl load-module" now
    # load-module module-x11-xsmp
    
    ### Load additional modules from GConf settings. This can be configured with the paprefs tool.
    ### Please keep in mind that the modules configured by paprefs might conflict with manually
    ### loaded modules.
    .ifexists module-gconf.so
    .nofail
    load-module module-gconf
    .fail
    .endif
    
    ### Publish connection data in the X11 root window
    .ifexists module-x11-publish.so
    .nofail
    load-module module-x11-publish
    .fail
    .endif
    
    ### Make some devices default
    #set-default-source input
    /etc/pulse/daemon.conf
    Code:
    # $Id: daemon.conf.in 2175 2008-03-27 23:39:10Z lennart $
    #
    # This file is part of PulseAudio.
    #
    # PulseAudio is free software; you can redistribute it and/or modify
    # it under the terms of the GNU Lesser General Public License as published by
    # the Free Software Foundation; either version 2 of the License, or
    # (at your option) any later version.
    #
    # PulseAudio is distributed in the hope that it will be useful, but
    # WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
    # General Public License for more details.
    #
    # You should have received a copy of the GNU Lesser General Public License
    # along with PulseAudio; if not, write to the Free Software
    # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
    # USA.
    
    ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
    ## more information. Default values a commented out.  Use either ; or # for
    ## commenting.
    
    ; daemonize = no
    ; fail = yes
    ; disallow-module-loading = no
    ; use-pid-file = yes
    ; system-instance = no
    ; disable-shm = no
    
    ; high-priority = yes
    ; nice-level = -11
    
    ; realtime-scheduling = no
    ; realtime-priority = 5
    
    ; exit-idle-time = -1
    ; module-idle-time = 20
    ; scache-idle-time = 20
    
    ; dl-search-path = (depends on architecture)
    
    ; default-script-file = 
    
    ; log-target = auto
    ; log-level = notice
    
    ; resample-method = speex-float-3
    ; disable-remixing = no
    
    ; no-cpu-limit = no
    
    ; rlimit-as = -1
    ; rlimit-core = -1
    ; rlimit-data = -1
    ; rlimit-fsize = -1
    ; rlimit-nofile = 256
    ; rlimit-stack = -1
    ; rlimit-nproc = -1
    ; rlimit-memlock = -1
    ; rlimit-nice = 31
    ; rlimit-rtprio = 9
    
    ; default-sample-format = s16le
    ; default-sample-rate = 44100
     default-sample-channels = 4
    
    ; default-fragments = 4
    ; default-fragment-size-msec = 25
    any help would greatly be appreciated !

    -MD
    Attached Images Attached Images
    Last edited by MemoryDump; June 5th, 2008 at 07:03 PM.
    Running: Ubuntu 10.10 & Windows 7 Pro
    Registered Linux User #373810
    Become a Registered Linux User Here.

  2. #2
    Join Date
    Apr 2005
    Location
    C A N A DA
    Beans
    268
    Distro
    Ubuntu

    Re: MIC setup with PulseAudio

    still looking for some help! only thing giving me a headache on Hardy.
    Running: Ubuntu 10.10 & Windows 7 Pro
    Registered Linux User #373810
    Become a Registered Linux User Here.

  3. #3
    Join Date
    Apr 2005
    Location
    C A N A DA
    Beans
    268
    Distro
    Ubuntu

    Re: MIC setup with PulseAudio

    really hoping to find some help here! I've tried #pulseaudio on IRC and there's normally nobody there answering questions
    Running: Ubuntu 10.10 & Windows 7 Pro
    Registered Linux User #373810
    Become a Registered Linux User Here.

  4. #4
    Join Date
    Nov 2007
    Location
    Vegas
    Beans
    Hidden!
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: MIC setup with PulseAudio

    yah, me too...

    got no mic sound in pulseaudio. plz help. much obliged.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •