Results 1 to 10 of 183

Thread: HOWTO: change resolution/refresh rate in Xorg

Threaded View

  1. #1
    Join Date
    Apr 2005
    Location
    Finland
    Beans
    Hidden!
    Distro
    Hardy Heron (Ubuntu Development)

    HOWTO: change resolution/refresh rate in Xorg

    IMPORTANT: This is a very old howto (2005), please check more recent documentation for your version of Ubuntu if you need assistance with setting up Xorg, display resolution or anything like that. This howto is not up to date.
    ------------------------------------------------------------------------------------------------------------------------------------
    Howto: change resolution/refresh rate in Xorg
    If you can't change your display resolution or refresh rate (no desired option available) these instructions may help.

    Backup your configuration file

    Code:
    sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup

    How to reconfigure Xorg
    Notice that auto detection of devices works best if Xorg is not running. Therefore it's recommended to stop X before reconfiguring this will put you to text only mode / command line:
    Code:
    sudo /etc/init.d/gdm stop (or kdm for KDE)
    You can do the whole X configuration process by entering:
    Code:
      sudo dpkg-reconfigure xserver-xorg
    To start Gnome/KDE again:
    Code:
    sudo /etc/init.d/gdm start (or kdm for KDE)
    How to test configuration without restarting X?
    See this excellent tip from
    henriquemaia (Thanks!)

    How to edit xorg.conf file

    Run in terminal or console:
    Code:
    sudo nano /etc/X11/xorg.conf
    online help in nano: ctrl+g (ctrl+x exits)

    Where is the log file, how to debug?
    File:
    Code:
     /var/log/Xorg.0.log
    contains lots of invaluable debugging information about what's going on as Xorg starts. Watch for lines with EE (errors) and WW (warnings).

    How to edit or add HorizSync and VertRefresh lines
    Find your monitors manual (manufacturers website and Google are useful).
    Look for hozizontal sync and vertical refresh rates, also if bandwidth or maximum dot clock / pixel clock is mentioned, write it down.

    Edit xorg.conf and put correct values to your xconf.org's Monitor section. Something like this:
    Code:
    Section "Monitor"
        Identifier    "CM752ET"
        HorizSync     31-101
        VertRefresh    60-160
    EndSection
    Be sure that Identifier is same as the Monitor line in Screen section.


    Adding custom modeline
    If you know what your monitor can do, for example 1024x768@75Hz, you can use this page to generate a custom Modeline for you xorg.conf:

    Copy paste the new Modeline to Monitor section (for example):

    Code:
     # 1024x768 @ 75.00 Hz (GTF) hsync: 60.15 kHz; pclk: 81.80 MHzModeline "1024x768_75.00"  81.80  1024 1080 1192 1360  768 769 772 802  -HSync +Vsync
    Watch that the hsync is in range with the HorizSync on the same section (in this example the range is 31-101 and this modelines hsync is 60.15, so we're safe). Also the VertRefresh and the refresh rate you selected (75Hz in this example) should match - in this example VertRefresh is 60-160 and modeline is 75Hz, so that's all good.

    Now you can select the default resolution and colordepth by tweaking the Screen section. It should look something like this:

    Code:
    Section "Screen"
        Identifier    "Default Screen"
        Device        "NVIDIA Corporation NV34 [GeForce FX 5200]"
        Monitor        "CM752ET"
        DefaultDepth    16
        SubSection "Display"
            Depth        16
            Modes      "1024x768_75.00"
        EndSubSection
    EndSection
    Monitor name here (CM752ET) matches the Identifier on your Monitor Section. Device line here matches the identifier on your Device section - you get the idea? It ties together some settings for your screen - the graphics card and your monitor. You may have more Subsections here, but only one is needed.

    Change the DefaultDepth to what you would want it to be, 16 (65536 colors) or 24 (16M colors). Change the Modes line to match the resolutions you want to use - Depth must match DefaultDepth (here it's 16).

    Save the config. If you're in X, hit CTRL+ALT+BACKSPACE to restart X (if you're running logon manager like xdm, kdm or gdm). Change between virtual consoles with CTRL + F1 F2 F3 and so on - your X should be on F7.

    Starting the X:
    startx OR sudo /etc/init.d/gdm start (in KDE it's kdm)

    If that doesn't work, try fixing the xorg.conf or get back to your original by copying the backup over your changed one with:
    Code:
    sudo cp /etc/X11/xorg.conf_backup /etc/X11/xorg.conf
    When you're back in X, you can cycle through different modes by pressing CTRL+ALT++ (plus sign on numpad), or go to System->Preferences->Screen Resolution.

    How to adjust position of your screen?
    open terminal(Applications->Accessories->Terminal), run xvidtune (type: "xvidtune"), adjust the screen and hit Show-button. You'll see a line with something like this on the terminal screen:
    Code:
    "1280x1024"   157.50   1280 1332 1492 1728   1024 1025 1028 1072 +hsync +vsync
    Next you should:
    Code:
    sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
    sudo nano /etc/X11/xorg.conf
    In Monitor section, add the above line with a prefix "Modeline", like this:
    Code:
    Modeline "1280x1024"   157.50   1280 1332 1492 1728   1024 1025 1028 1072 +hsync +vsync
    That should do it. There should be no need to restart X if you did make the change (hit Apply in xvidtune), but you should test that this new change works. Hit ctrl+alt+backspace to restart X. If it doesn't work, you can copy back the old configuration file using:
    Code:
    sudo /etc/X11/xorg.conf_backup /etc/X11/xorg.conf
    and restart X using:
    Code:
    sudo /etc/init.d/gdm start
    Problems? Things to try:
    • Check notes concerning your video card in Ubuntu wiki https://wiki.ubuntu.com/HardwareSupp...entsVideoCards
    • Check BIOS settings - eg. amount of shared memory
    • Add to your monitor section line
      Code:
      Option "DDC" "False"
    • if you're using kvm (keyboard/video/mouse-switch), try reconfiguring without
    • try vesa driver instead of your graphics card specific driver
    • try nv instead of nvidia
    • try ati instead of fglrx
    • try intel instead of i810
    • try 16-bits colors instead of 24-colors


    • adding HorizSync and VertRefresh line in Monitor section with correct values from monitors specification
    • adding custom modeline for your monitor in Monitor section

    • reconfiguring Xorg
      • Code:
        sudo dpkg-reconfigure xserver-xorg

    • if you have Intel graphics chip, try installing 855resolution, or 915resolution
    • if having problems to get very high resolution working with nvidia drivers, try adding some or all of these at your own risk (some of these may be driver specific - check other documentation before using)
      Option "UseEDIDFreqs" "FALSE"
      Option "NoBandWidthTest" "TRUE"
      Option "ExactModeTimingsDVI" "TRUE"
      Option "ModeValidation" "NoEdidModes, NoMaxPClkCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoEdidMaxPClkCheck"
    • Which driver should I use? Is my card supported? See list of supported cards / chipsets.
    • Advanced X11 configuration in FreeBSD handbook
    • If you're using nvidia driver, try gksudo nvidia-settings
    • Try booting from Live-CD, if that works, copy /etc/X11/xorg.conf from there
    • Tips and tricks in this howto: http://ubuntuforums.org/showthread.php?t=269052


    Check
    FixVideoResolutionHowto
    https://wiki.ubuntu.com/FixVideoResolutionHowto
    https://wiki.ubuntu.com/DebuggingXAutoconfiguration
    https://help.ubuntu.com/community/Fi...esolutionHowto


    Miscellaneous resources (may contain outdated information)

    Integrated Intel graphics card?
    http://ubuntuforums.org/showthread.php?t=24923 (855resolution, hoary)
    http://www.x.org/X11R6.8.2/doc/i810.html

    Laptop with Intel graphics and widescreen
    http://ubuntuforums.org/showthread.php?t=351647

    Widescreen
    http://ubuntuguide.org/wiki/Ubuntu:F...screen_Support

    Useful command line tools

    • xresprobe [driver=vesa,ati,nv,nvidia,i810]
    • ddcprobe

    Why must I set the correct screen resolution on every startup?
    http://www.ubuntuforums.org/showpost...55&postcount=5

    Online modeline generators:
    http://sh.nu/nvidia/gtf.php
    http://www.dkfz-heidelberg.de/spec/linux/modeline/
    http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
    http://koala.ilog.fr/cgi-bin/nph-colas-modelines
    http://zaph.com/Modeline/

    Complete xorg.conf files:
    http://aleks.vigio.pl/

    What all those options do?
    http://xorg.freedesktop.org/archive/...rg.conf.5.html

    Some random links I may need to sort later (mainly about setting widescreen resolution):
    https://bugs.launchpad.net/ubuntu/+s...org/+bug/67369
    http://gentoo-wiki.com/HOWTO_Widescr...lutions_(WSXGA)
    http://thoughtworker.in/2007/04/24/k...ht-resolution/
    https://bugs.launchpad.net/ubuntu/+s...69/comments/21

    Installing proprietary drivers
    Envy, Unofficial installer for ati and nvidia drivers:
    http://www.albertomilone.com/nvidia_scripts1.html



    If anyone wants to copy this guide to Ubuntus wikipages, please feel free to do so.
    Last edited by heimo; May 5th, 2013 at 05:27 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •