Results 1 to 2 of 2

Thread: Installing affix in Ubuntu

Hybrid View

  1. #1
    Join Date
    Jan 2008
    Beans
    135

    Installing affix in Ubuntu

    Hi I'm trying to install the affix module

    http://affix.sourceforge.net/index.shtml#news

    Its a bluetooth protocol stack and I think I'd work in replace of bluez. My hardware says to be supported by it in the supported hardware list.

    However, when I read the install instructions fro Debian in

    http://affix.sourceforge.net/affix-e...r/1.1/c39.html

    the first thing it says is that I have to configure my kernel with make menuconfig and I know those are kin of compilign commands, however, I dont know where should I launch those commands nor if I have the kernel source to compile it and how dangerous it is.

    Well, any help will be appreciated.

    Sorry for my ugly english
    Using Ubuntu 11.04 Fully updated, Toshiba U305 S5107 Intel Core 2 duo 4096 RAM.
    Sorry for my bad english...
    Did I helped you? Better try helping someone else than thanking me.

  2. #2
    Join Date
    Jan 2008
    Beans
    135

    Re: Installing affix in Ubuntu

    Ok, I've found some info in the internet and now I'm trying to disable the modules needed to be disabled for affix:

    In the Affix installation manual says
    You have to configure you kernel before you can start installing Affix kernel module. To configure your kernel directory and use command make menuconfig to configure your kernel. Then,

    * disable "Bluetooth support" (Bluez) support on Networking support page
    * disable "USB Bluetooth TTY support" on USB support page
    * enable support for USB devices
    * enable support for PCMCIA device
    * enable yenta_socket support
    * enable support hot plug devices
    * enable DEVFS device file system. This is highly recommended.
    * enable support for PPP
    But now I don't know what modules should I affect, there is a Networking and others but I don't see the USB support. I'm affraid of messing something up but I'll keep trying. Any help will be appreciated.

    This is the list of Options in my make menuconfig:

    General setup --->[*] Enable loadable module support --->[*] Enable the block layer --->
    Processor type and features --->
    Power management options --->
    Bus options (PCI etc.) --->
    Executable file formats / Emulations --->
    Networking --->
    Device Drivers --->
    Firmware Drivers --->
    File systems --->
    *] Instrumentation Support --->
    Kernel hacking --->
    Security options --->
    -*- Cryptographic API --->[*] Virtualization --->
    Library routines --->
    Last edited by ztrange; June 22nd, 2008 at 01:27 AM.
    Using Ubuntu 11.04 Fully updated, Toshiba U305 S5107 Intel Core 2 duo 4096 RAM.
    Sorry for my bad english...
    Did I helped you? Better try helping someone else than thanking me.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •