Disk /dev/sdb doesn't contain a valid partition table

[449]

Is my external hdd broken? I've tried formatting it but nothing changes...

Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000b00fd

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        2898    23278153+   7  HPFS/NTFS
/dev/sda3            2899       38848   288768375   83  Linux
/dev/sda4           38849       38913      522112+  82  Linux swap / Solaris

Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0000166a

Disk /dev/sdb doesn't contain a valid partition table

[HotShotDJ]

Is my external hdd broken? I've tried formatting it but nothing changes

What method are you using to partition and format the drive?

[449]

What method are you using to partition and format the drive?

gparted, I've tried everything I know of.

[HotShotDJ]

gparted, I've tried everything I know of.

I imagine that when you plug in the external drive, it is not automounting and showing up on your desktop or in "Places" since there is not valid filesystem on it. However, could you confirm that for me?

[|{urse]

DONT DO IT THIS WAY IF ITS A THUMBDRIVE

but normally if you wanted to reformat and mount a hard disk:

sudo mkfs -t ext3 /dev/sdb

sudo su

mkdir /media/sdb

su yourusername

sudo mount /dev/sdb /media/sdb

sudo chown -R yourusername /dev/sdb

sudo chown -R yourusername /media/sdb

[449]

I imagine that when you plug in the external drive, it is not automounting and showing up on your desktop or in "Places" since there is not valid filesystem on it. However, could you confirm that for me?

Yes, it shows up as /media/disk.

[HotShotDJ]

Yes, it shows up as /media/disk.

Ok.. Thats a horse of a different color. If there were no file system on there at all, it would not mount. So lets unmount the thing (right click on the desktop icon and then choose "Unmount" from the pop-up menu)

Now, you can run gparted on it. Make SURE you are running it with Administrator privileges. Delete any partitions on there already (I'm assuming there is no data on the drive that you wish to save). Now, create the partition, define the filesystem you want to use and then apply. Everything should go smoothly now.

[449]

rive that you wish to save). Now, create the partition, define the filesystem you want to use and then apply. Everything should go smoothly now.

Heres: what happen: I unmounted the drive, opened terminal, then typed 'sudo gparted. At this point it scans for devices and nothing happens.

[HotShotDJ]

Heres: what happen: I unmounted the drive, opened terminal, then typed 'sudo gparted. At this point it scans for devices and nothing happens.

At the very least, it should be detecting your internal hard drive that is clearly there, or you wouldn't be able to boot your computer at all.

EDIT: What happens if you type

sudo gparted /dev/sdb

or

sudo gparted /dev/sda

NOTE: With /dev/sda -- LOOK, but don't TOUCH!

[gruslo]

I have the same issue (external hard drive not working, same message about not containing a valid partition) but I cannot unmount my drive and then "gpart" it, because when I right click on the drive, the option I have is to "mount" it and not to unmount. If I choose "mount" I get the message "Cannot mount drive". If I go to gparted and right click on the sdb drive to format it, I see that the option "Format" cannot be clicked cause it's inactive. How can I manage with this??