Hi JRE, All,
I have been running Moblock for a while on Linux Mint Daryna but new distro Mint Elyssa (Hardy based) = new problems.
I use Firestarter as firewall.
I installed Moblock and it worked straight out of the box. For a while. I had to adjust moblock.conf and used the same settings as before.
Then moblock did not want to start at all anymore.
Status:
Moblock-control.log:Code:Chain INPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT tcp -- * * 192.168.0.1 0.0.0.0/0 tcp flags:!0x17/0x02 35 7185 ACCEPT udp -- * * 192.168.0.1 0.0.0.0/0 60 2520 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 limit: avg 1/sec burst 5 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 0 limit: avg 1/sec burst 5 0 0 LSI udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:33434 0 0 LSI icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 DROP all -- eth0 * 0.0.0.0/0 255.255.255.255 10 2505 DROP all -- * * 0.0.0.0/0 192.168.0.255 0 0 DROP all -- * * 224.0.0.0/8 0.0.0.0/0 0 0 DROP all -- * * 0.0.0.0/0 224.0.0.0/8 0 0 DROP all -- * * 255.255.255.255 0.0.0.0/0 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 0 0 LSI all -f * * 0.0.0.0/0 0.0.0.0/0 limit: avg 10/min burst 5 602 522K INBOUND all -- eth0 * 0.0.0.0/0 0.0.0.0/0 0 0 LOG_FILTER all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 6 prefix `Unknown Input' Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 limit: avg 1/sec burst 5 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 0 limit: avg 1/sec burst 5 0 0 LSI udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:33434 0 0 LSI icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 LOG_FILTER all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 6 prefix `Unknown Forward' Chain OUTPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT tcp -- * * 192.168.0.2 192.168.0.1 tcp dpt:53 41 2545 ACCEPT udp -- * * 192.168.0.2 192.168.0.1 udp dpt:53 60 2520 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 0 0 DROP all -- * * 224.0.0.0/8 0.0.0.0/0 2 136 DROP all -- * * 0.0.0.0/0 224.0.0.0/8 0 0 DROP all -- * * 255.255.255.255 0.0.0.0/0 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 574 44221 OUTBOUND all -- * eth0 0.0.0.0/0 0.0.0.0/0 0 0 LOG_FILTER all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 6 prefix `Unknown Output' Chain INBOUND (1 references) pkts bytes target prot opt in out source destination 602 522K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 LSI all -- * * 0.0.0.0/0 0.0.0.0/0 Chain LOG_FILTER (5 references) pkts bytes target prot opt in out source destination Chain LSI (6 references) pkts bytes target prot opt in out source destination 0 0 LOG_FILTER all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 LOG tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 1/sec burst 5 LOG flags 0 level 6 prefix `Inbound ' 0 0 DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 0 0 LOG tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x04 limit: avg 1/sec burst 5 LOG flags 0 level 6 prefix `Inbound ' 0 0 DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x04 0 0 LOG icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 limit: avg 1/sec burst 5 LOG flags 0 level 6 prefix `Inbound ' 0 0 DROP icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/sec burst 5 LOG flags 0 level 6 prefix `Inbound ' 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain LSO (0 references) pkts bytes target prot opt in out source destination 0 0 LOG_FILTER all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/sec burst 5 LOG flags 0 level 6 prefix `Outbound ' 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTBOUND (1 references) pkts bytes target prot opt in out source destination 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 518 39692 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 56 4529 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain moblock_fw (0 references) pkts bytes target prot opt in out source destination 0 0 NFQUEUE all -- * * 0.0.0.0/0 0.0.0.0/0 NFQUEUE num 0 Chain moblock_in (0 references) pkts bytes target prot opt in out source destination 0 0 RETURN all -- * * 64.15.112.0 0.0.0.0/0 0 0 RETURN all -- * * 192.168.0.0/16 0.0.0.0/0 0 0 NFQUEUE all -- * * 0.0.0.0/0 0.0.0.0/0 NFQUEUE num 0 Chain moblock_out (0 references) pkts bytes target prot opt in out source destination 0 0 NFQUEUE all -- * * 0.0.0.0/0 0.0.0.0/0 NFQUEUE num 0 Please check if the above printed iptables rules are correct! * moblock is not running.
Code:[sudo] password for eddy: YAHOOZ-060921002953:75.35.59.144-75.35.59.151 YAHOOZ-061003013011:75.41.158.152-75.41.158.159 YAHOOZ-070828170428:76.246.182.152-76.246.182.159 Installing blocklist to /etc/moblock/guarding.p2p [ OK ] * MoBlock is not running. 2008-06-07 10:44:00 EST End: moblock-control update 2008-06-07 10:44:16 EST Begin: moblock-control start Inserting iptablesiptables v1.3.8: host/network `-' not found Try `iptables -h' or 'iptables --help' for more information. [fail] 2008-06-07 11:00:23 EST Begin: moblock-control reload Building blocklist [ OK ] Removing lines containing the following regular expressions from the blocklist: google yahoo altavista debian sourceforge Removed the following lines: add2.dir.scd.yahoo.com ads:66.218.70.227-66.218.70.227 BOGDAN_LUCIAN_CRISTIAN-YAHOOCOM:208.98.12.0-208.98.12.63 Cuyahooga County Bar Assoc:66.73.60.72-66.73.60.79 extads1.vip.ukl.yahoo.com ads:217.12.4.96-217.12.4.96 gigenfu@yahoo.com.tw:218.210.18.64-218.210.18.71 GOOGLE-NL:213.19.160.192-213.19.160.207 GOOGLE/PLANET LABS:208.185.40.192-208.185.40.223 GOOGLE/PLANET LABS:208.185.4.128-208.185.4.159 GOOGLE/PLANET LABS:208.185.42.96-208.185.42.127 NTT Com/SOL/VTF/EH/Sony/Google:157.238.217.32-157.238.217.39 rd1.vip.ukl.yahoo.com ads:217.12.6.21-217.12.6.21 Savvis-Sourceforge Split1 Start Range:66.35.192.0-66.35.249.255 Savvis Sourceforge Split2 End Range:66.35.251.0-66.35.255.255 sexymagnet.com/p2w1.geo.scd.yahoo.com]:66.218.79.157-66.218.79.157 SNET TEST YAHOO 01:66.159.160.136-66.159.160.143 SNET TEST YAHOO 02:66.159.160.144-66.159.160.151 SNET TEST YAHOO 03:66.159.160.152-66.159.160.159 SNET TEST YAHOO 04:66.159.160.160-66.159.160.167 SNET TEST YAHOO 05:66.159.160.168-66.159.160.183 SNET TEST YAHOO 06:66.159.160.184-66.159.160.191 SNET TEST YAHOO 07:66.159.160.192-66.159.160.199 SNET TEST YAHOO 09:66.159.160.208-66.159.160.215 SNET TEST YAHOO 10:66.159.160.216-66.159.160.223 SNET TEST YAHOO 11:66.159.160.224-66.159.160.231 SNET TEST YAHOO 3004:64.252.30.112-64.252.30.119 SNET TEST YAHOO:64.252.30.80-64.252.30.111 SNET TEST YAHOO:66.159.160.200-66.159.160.207 SNET TEST YAHOO:66.159.160.232-66.159.160.255 SNET TEST YAHOO:66.159.160.32-66.159.160.39 SNET TEST YAHOO:66.159.160.8-66.159.160.23 SNET TEST YAHOO:66.159.185.0-66.159.185.47 Software in the Public Interest / Debian:194.109.137.216-194.109.137.223 Taiwan Yahoo Electric Co., Ltd:203.74.105.88-203.74.105.95 Tonghua Yahoo Netbar,Kuaida Town , Tonghua City,:218.62.120.236-218.62.120.239 Tor.debian40etch64minim:88.198.17.116-88.198.17.116 tsaisuntech@yahoo.com:220.228.117.128-220.228.117.135 yahoo fraud scammer:68.195.62.40-68.195.62.40 YAHOOPC:218.233.116.192-218.233.116.255 yahoo scammer:4.65.105.109-4.65.105.109 Yahoo Software Development India Pvt. Ltd:203.145.181.48-203.145.181.63 YAHOOZ-060921002953:75.35.59.144-75.35.59.151 YAHOOZ-061003013011:75.41.158.152-75.41.158.159 YAHOOZ-070828170428:76.246.182.152-76.246.182.159 Installing blocklist to /etc/moblock/guarding.p2p [ OK ] * MoBlock is not running. 2008-06-07 11:00:33 EST End: moblock-control reload 2008-06-07 11:00:54 EST Begin: moblock-control restart Deleting iptablesiptables: No chain/target/match by that name iptables: No chain/target/match by that name iptables: No chain/target/match by that name iptables: No chain/target/match by that name iptables: Bad rule (does a matching rule exist in that chain?) * Some iptables rules could not be deleted. The most common reason for this is * that they did not exist. If MoBlock was not running this is the correct * behaviour. But if MoBlock was running there is some problem. Make sure that * MoBlock inserts its iptables rules correctly and that other software, e.g. * firewall applications, don't delete them. Make sure that MoBlock is started * after other firewall applications. Stopping MoBlock [fail] Inserting iptablesiptables v1.3.8: host/network `-' not found Try `iptables -h' or 'iptables --help' for more information.
I have tried to delete and re-install but that didn't work either.
I have ben fiddling a bit more and it looks like the remove and re-install did not work properly:
So, I can not uninstall or re-install it.Code:[sudo] password for eddy: Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 17 not upgraded. Need to get 0B/59.6kB of archives. After this operation, 0B of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 87966 files and directories currently installed.) Preparing to replace moblock 0.9~rc2-11~hardy (using .../moblock_0.9~rc2-11~hardy_i386.deb) ... * Stopping MoBlock moblock [fail] invoke-rc.d: initscript moblock, action "stop" failed. dpkg: warning - old pre-removal script returned error exit status 3 dpkg - trying script from the new package instead ... * Stopping MoBlock moblock [fail] invoke-rc.d: initscript moblock, action "stop" failed. dpkg: error processing /var/cache/apt/archives/moblock_0.9~rc2-11~hardy_i386.deb (--unpack): subprocess new pre-removal script returned error exit status 3 * Starting MoBlock moblock invoke-rc.d: initscript moblock, action "start" failed. dpkg: error while cleaning up: subprocess post-installation script returned error exit status 8 Errors were encountered while processing: /var/cache/apt/archives/moblock_0.9~rc2-11~hardy_i386.deb E: Sub-process /usr/bin/dpkg returned an error code
Tried a apt-get -f install but the same thing:
Code:eddy@eddy-mint2 ~ $ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libnetfilter-queue1 libnfnetlink0 The following NEW packages will be installed: libnetfilter-queue1 libnfnetlink0 0 upgraded, 2 newly installed, 0 to remove and 17 not upgraded. 1 not fully installed or removed. Need to get 0B/78.9kB of archives. After this operation, 139kB of additional disk space will be used. Do you want to continue [Y/n]? y Selecting previously deselected package libnfnetlink0. (Reading database ... 87954 files and directories currently installed.) Unpacking libnfnetlink0 (from .../libnfnetlink0_0.0.30-2_i386.deb) ... Selecting previously deselected package libnetfilter-queue1. Unpacking libnetfilter-queue1 (from .../libnetfilter-queue1_0.0.13-1_i386.deb) ... Selecting previously deselected package moblock. Preparing to replace moblock 0.9~rc2-11~hardy (using .../moblock_0.9~rc2-11~hardy_i386.deb) ... * Stopping MoBlock moblock [fail] invoke-rc.d: initscript moblock, action "stop" failed. dpkg: warning - old pre-removal script returned error exit status 3 dpkg - trying script from the new package instead ... * Stopping MoBlock moblock [fail] invoke-rc.d: initscript moblock, action "stop" failed. dpkg: error processing /var/cache/apt/archives/moblock_0.9~rc2-11~hardy_i386.deb (--unpack): subprocess new pre-removal script returned error exit status 3 * Starting MoBlock moblock invoke-rc.d: initscript moblock, action "start" failed. dpkg: error while cleaning up: subprocess post-installation script returned error exit status 8 Errors were encountered while processing: /var/cache/apt/archives/moblock_0.9~rc2-11~hardy_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
Any idea?
Bookmarks