Page 54 of 65 FirstFirst ... 444525354555664 ... LastLast
Results 531 to 540 of 650

Thread: General MoBlock thread

  1. #531
    Join Date
    Dec 2006
    Beans
    163
    Distro
    Kubuntu Development Release

    Re: General MoBlock thread

    Is "/usr/bin/which" installed at your system?
    Yes, it is.

    I assume you have an empty value in "Options - Setting - Sudo frontend". Was this intended or did it happen on its own? Since when do you have this setting? Setting a valid one (e.g. /usr/bin/kdesudo or /usr/bin/gksu) in there will probably remove the error messages.
    That option is set to /usr/bin/kdesudo

    Do you use Gnome or KDE? Or are there any other specific things to your system?
    I use KDE, I'm not using any weird settings or anything, just default.

  2. #532
    Join Date
    Jan 2007
    Beans
    772

    Re: General MoBlock thread

    Does /usr/bin/kdesudo exist?
    What happens if you start it with "sudo pgl-gui"?
    Did you ever try the oneiric specific version 2.1.2.1-1~oneiric of 2011-09-04?
    What was the problem with the oneiric version?
    So 2.1.2-1~natty did work? What about 2.1.3-1~natty
    Please post your logfiles and output of commands wrapped in code tags:
    Code:
    [code]output[/code]
    Co-author of PeerGuardian Linux (pgl). Maintainer of the pgl package repositories for Debian and Ubuntu.

  3. #533
    Join Date
    Dec 2006
    Beans
    163
    Distro
    Kubuntu Development Release

    Re: General MoBlock thread

    Can you reproduce this or is it only me?

    In pgl-gui click on reload, it then disables.
    Click start - error message saying failed.

    Goto terminal - sudo pglcmd start - another fail message
    sudo pglcmd restart - it then restarts

  4. #534
    Join Date
    Dec 2006
    Beans
    163
    Distro
    Kubuntu Development Release

    Re: General MoBlock thread

    Does /usr/bin/kdesudo exist?

    Yes, it is there.

    What happens if you start it with "sudo pgl-gui"?

    Exactly the same problems.

    Did you ever try the oneiric specific version 2.1.2.1-1~oneiric of 2011-09-04?

    Yes, that didn't work for me.

    What was the problem with the oneiric version?

    Same problems with the gui (sorry for not reporting them then).

    So 2.1.2-1~natty did work? What about 2.1.3-1~natty

    Yes, the natty version worked perfectly.

    I just removed 2.1.3 oneiric and installed the natty version and it works fine so it's definitely a problem with the oneiric one.

  5. #535
    Join Date
    Jan 2007
    Beans
    772

    Re: General MoBlock thread

    Clueless ... I thought I had solved the oneiric issues, once I got it building. So no, I can't reproduce this.

    Since 2.1.3 Oneiric has the exact same source as all other packages, it is just built under a oneiric environment.

    Is there any other oneiric user out there? Please report whether it works for you!

    You may try to get more information with a backtrace. Start it with "gdb pgl-gui" and then type "run".
    Please post your logfiles and output of commands wrapped in code tags:
    Code:
    [code]output[/code]
    Co-author of PeerGuardian Linux (pgl). Maintainer of the pgl package repositories for Debian and Ubuntu.

  6. #536
    Join Date
    Dec 2006
    Beans
    163
    Distro
    Kubuntu Development Release

    Re: General MoBlock thread

    Code:
    gavin@kubuntu:~$ gdb pgl-gui
    GNU gdb (Ubuntu/Linaro 7.3-0ubuntu2) 7.3-2011.08
    Copyright (C) 2011 Free Software Foundation, Inc.
    License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
    This is free software: you are free to change and redistribute it.
    There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
    and "show warranty" for details.
    This GDB was configured as "x86_64-linux-gnu".
    For bug reporting instructions, please see:
    <http://bugs.launchpad.net/gdb-linaro/>...
    Reading symbols from /usr/bin/pgl-gui...(no debugging symbols found)...done.
    (gdb) run
    Starting program: /usr/bin/pgl-gui 
    [Thread debugging using libthread_db enabled]
    ** Debug: Graphical Sudo:  "/usr/bin/kdesudo" 
    [New Thread 0x7fffe8dba700 (LWP 16769)]
    ** Debug: Graphical Sudo:  "/usr/bin/kdesudo" 
    ** Debug: Connection to DBus was successful. 
    ** Warning: bool hasPermissions(const QString&) Could not read from file "/etc/test_file" 
    ** Debug: void SuperUser::executeCommands(QStringList, bool) Executing commands:  ("/usr/bin/kdesudo "/usr/bin/pglcmd reload"") 
    [New Thread 0x7fffe1ff8700 (LWP 16775)]
    ** Debug: virtual void ProcessT::run() Executing command "/usr/bin/kdesudo "/usr/bin/pglcmd reload"" () ... 
    ** Debug: "* Reloading PeerGuardian Linux pgld
       ...done." 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    [Thread 0x7fffe1ff8700 (LWP 16775) exited]
    ** Warning: bool hasPermissions(const QString&) Could not read from file "/etc/test_file" 
    ** Debug: void SuperUser::executeCommands(QStringList, bool) Executing commands:  ("/usr/bin/kdesudo "/usr/bin/pglcmd start"") 
    [New Thread 0x7fffe1ff8700 (LWP 16808)]
    ** Debug: virtual void ProcessT::run() Executing command "/usr/bin/kdesudo "/usr/bin/pglcmd start"" () ... 
    ** Debug: "* Starting PeerGuardian Linux pgld
       ...fail!" 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    [Thread 0x7fffe1ff8700 (LWP 16808) exited]
    ** Warning: bool hasPermissions(const QString&) Could not read from file "/etc/test_file" 
    ** Debug: void SuperUser::executeCommands(QStringList, bool) Executing commands:  ("/usr/bin/kdesudo "/usr/bin/pglcmd restart"") 
    [New Thread 0x7fffe1ff8700 (LWP 16827)]
    ** Debug: virtual void ProcessT::run() Executing command "/usr/bin/kdesudo "/usr/bin/pglcmd restart"" () ... 
    ** Debug: "INFO: Started." 
    ** Debug: "* Restarting PeerGuardian Linux pgld
       ...done." 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    [Thread 0x7fffe1ff8700 (LWP 16827) exited]
    ** Debug: "INFO: ASCII: 210337 entries loaded from "/var/lib/pgl/master_blocklist.p2p"" 
    ** Debug: "INFO: Blocking 210337 IP ranges (2706313290 IPs)." 
    ** Debug: "INFO: NFQUEUE: binding to queue 92" 
    ** Debug: "INFO: ACCEPT mark: 20" 
    ** Debug: "INFO: REJECT mark: 10" 
    ** Warning: bool hasPermissions(const QString&) Could not read from file "/etc/test_file" 
    ** Debug: void SuperUser::executeCommands(QStringList, bool) Executing commands:  ("/usr/bin/kdesudo "/usr/bin/pglcmd stop"") 
    [New Thread 0x7fffe1ff8700 (LWP 16991)]
    ** Debug: virtual void ProcessT::run() Executing command "/usr/bin/kdesudo "/usr/bin/pglcmd stop"" () ... 
    ** Debug: "INFO: Unbinding from nfqueue." 
    ** Debug: "STATS: Blocked hit statistics:" 
    ** Debug: "STATS: 0 hits total" 
    ** Debug: "* Stopping PeerGuardian Linux pgld
       ...done." 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    [Thread 0x7fffe1ff8700 (LWP 16991) exited]
    ** Warning: bool hasPermissions(const QString&) Could not read from file "/etc/test_file" 
    ** Debug: void SuperUser::executeCommands(QStringList, bool) Executing commands:  ("/usr/bin/kdesudo "/usr/bin/pglcmd start"") 
    [New Thread 0x7fffe1ff8700 (LWP 17048)]
    ** Debug: virtual void ProcessT::run() Executing command "/usr/bin/kdesudo "/usr/bin/pglcmd start"" () ... 
    ** Debug: "INFO: Started." 
    ** Debug: "* Starting PeerGuardian Linux pgld
       ...done." 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    [Thread 0x7fffe1ff8700 (LWP 17048) exited]
    ** Debug: "INFO: ASCII: 210337 entries loaded from "/var/lib/pgl/master_blocklist.p2p"" 
    ** Debug: "INFO: Blocking 210337 IP ranges (2706313290 IPs)." 
    ** Debug: "INFO: NFQUEUE: binding to queue 92" 
    ** Debug: "INFO: ACCEPT mark: 20" 
    ** Debug: "INFO: REJECT mark: 10" 
    ** Warning: bool hasPermissions(const QString&) Could not read from file "/etc/test_file" 
    ** Debug: void SuperUser::executeCommands(QStringList, bool) Executing commands:  ("/usr/bin/kdesudo "/usr/bin/pglcmd reload"") 
    [New Thread 0x7fffe1ff8700 (LWP 17169)]
    ** Debug: virtual void ProcessT::run() Executing command "/usr/bin/kdesudo "/usr/bin/pglcmd reload"" () ... 
    ** Debug: "* Reloading PeerGuardian Linux pgld
       ...done." 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    [Thread 0x7fffe1ff8700 (LWP 17169) exited]
    ** Warning: bool hasPermissions(const QString&) Could not read from file "/etc/test_file" 
    ** Debug: void SuperUser::executeCommands(QStringList, bool) Executing commands:  ("/usr/bin/kdesudo "/usr/bin/pglcmd restart"") 
    [New Thread 0x7fffe1ff8700 (LWP 17202)]
    ** Debug: virtual void ProcessT::run() Executing command "/usr/bin/kdesudo "/usr/bin/pglcmd restart"" () ... 
    ** Debug: "INFO: Started." 
    ** Debug: "* Restarting PeerGuardian Linux pgld
       ...done." 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    [Thread 0x7fffe1ff8700 (LWP 17202) exited]
    ** Debug: "INFO: ASCII: 210337 entries loaded from "/var/lib/pgl/master_blocklist.p2p"" 
    ** Debug: "INFO: Blocking 210337 IP ranges (2706313290 IPs)." 
    ** Debug: "INFO: NFQUEUE: binding to queue 92" 
    ** Debug: "INFO: ACCEPT mark: 20" 
    ** Debug: "INFO: REJECT mark: 10"

  7. #537
    Join Date
    Dec 2006
    Beans
    163
    Distro
    Kubuntu Development Release

    Re: General MoBlock thread

    In the gui Start/Stop & Restart seem ok but the Reload button causes the problems.

    Strangely enough, the popup error messages upon start of the gui seem to have gone away. I've closed/reopened the gui several times in a row without error.
    Last edited by Gavin77; September 18th, 2011 at 02:38 PM.

  8. #538
    Join Date
    Jan 2007
    Beans
    772

    Re: General MoBlock thread

    According to your log you issued
    reload
    start
    restart
    stop
    start
    reload
    restart
    ... and only the first "start" failed, but all other commands succeeded. Make sure to wait some seconds so that one command can finish.
    Which version was this (dpkg -l pgl-gui)?
    Please post your logfiles and output of commands wrapped in code tags:
    Code:
    [code]output[/code]
    Co-author of PeerGuardian Linux (pgl). Maintainer of the pgl package repositories for Debian and Ubuntu.

  9. #539
    Join Date
    Dec 2006
    Beans
    163
    Distro
    Kubuntu Development Release

    Re: General MoBlock thread

    Code:
     
    dpkg -l pgl-gui
    Desired=Unknown/Install/Remove/Purge/Hold
    | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
    |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
    ||/ Name               Version            Description
    +++-==================-==================-====================================================
    ii  pgl-gui            2.1.3-1~oneiric    PeerGuardian Linux GUI - pgl-gui
    It doesn't matter how long I leave it, clicking on reload disables pgl and a following "start" will fail.

  10. #540
    Join Date
    Dec 2006
    Beans
    163
    Distro
    Kubuntu Development Release

    Re: General MoBlock thread

    I made a capture of what is happening.

    http://www.youtube.com/watch?v=gyjdI6-IJOE

Page 54 of 65 FirstFirst ... 444525354555664 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •