Page 55 of 65 FirstFirst ... 5455354555657 ... LastLast
Results 541 to 550 of 650

Thread: General MoBlock thread

  1. #541
    Join Date
    Jan 2007
    Beans
    770

    Re: General MoBlock thread

    What happens for "pglcmd reload" on console?
    Please post your logfiles and output of commands wrapped in code tags:
    Code:
    [code]output[/code]
    Co-author of PeerGuardian Linux (pgl). Maintainer of the pgl package repositories for Debian and Ubuntu.

  2. #542
    Join Date
    Dec 2006
    Beans
    161
    Distro
    Kubuntu Development Release

    Re: General MoBlock thread

    Code:
     
    sudo pglcmd reload
     * Reloading PeerGuardian Linux pgld                                                       [ OK ]
    The gui shows it as disabled.
    Maybe the gui isn't getting the message that it has reloaded and thinks it isn't running when it is?

  3. #543
    Join Date
    Jan 2007
    Beans
    770

    Re: General MoBlock thread

    "reload" is a no-op if pgl wasn't running before. So you have to first start it, and then "reload".
    pgl-gui checks periodically if pgld is running.
    Please post your logfiles and output of commands wrapped in code tags:
    Code:
    [code]output[/code]
    Co-author of PeerGuardian Linux (pgl). Maintainer of the pgl package repositories for Debian and Ubuntu.

  4. #544
    Join Date
    Dec 2006
    Beans
    161
    Distro
    Kubuntu Development Release

    Re: General MoBlock thread

    Yeah, pgl was running already before pressing reload.

    "Reload" > terminal shows OK, GUI shows disabled

  5. #545
    Join Date
    Jan 2007
    Beans
    770

    Re: General MoBlock thread

    Quote Originally Posted by Gavin77 View Post
    "Reload" > terminal shows OK, GUI shows disabled
    Did only the command succeed or is it really running ("pglcmd status")
    Please post your logfiles and output of commands wrapped in code tags:
    Code:
    [code]output[/code]
    Co-author of PeerGuardian Linux (pgl). Maintainer of the pgl package repositories for Debian and Ubuntu.

  6. #546
    Join Date
    Dec 2006
    Beans
    161
    Distro
    Kubuntu Development Release

    Re: General MoBlock thread

    After clicking on Reload in the gui:

    Code:
    sudo pglcmd status
    <snip>
     * pgld is not running
     * pglcmd.wd is running
    PID: 21217    CMD: /bin/sh /usr/sbin/pglcmd.wd

  7. #547
    Join Date
    Jan 2007
    Beans
    770

    Re: General MoBlock thread

    and after "pglcmd reload"?
    Please post your logfiles and output of commands wrapped in code tags:
    Code:
    [code]output[/code]
    Co-author of PeerGuardian Linux (pgl). Maintainer of the pgl package repositories for Debian and Ubuntu.

  8. #548
    Join Date
    Dec 2006
    Beans
    161
    Distro
    Kubuntu Development Release

    Re: General MoBlock thread

    Code:
    gavin@kubuntu:~$ sudo pglcmd reload
     * Reloading PeerGuardian Linux pgld                                                       [ OK ] 
    gavin@kubuntu:~$ sudo pglcmd status
    Current IPv4 iptables rules (this may take a while):
    
    Chain INPUT (policy ACCEPT 1 packets, 105 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 pgl_in     all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW mark match !0x14 
    
    Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 pgl_fwd    all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW mark match !0x14 
    
    Chain OUTPUT (policy ACCEPT 1 packets, 52 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 pgl_out    all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW mark match !0x14 
    
    Chain pgl_fwd (1 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 RETURN     all  --  *      *       192.168.2.0/24       192.168.2.0/24      
        0     0 RETURN     all  --  *      *       0.0.0.0/0            192.168.2.1         
        0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           mark match 0xa 
        0     0 NFQUEUE    all  --  *      *       0.0.0.0/0            0.0.0.0/0           NFQUEUE num 92
    
    Chain pgl_in (1 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 RETURN     all  --  *      *       192.168.2.0/24       0.0.0.0/0           
        0     0 RETURN     all  --  lo     *       0.0.0.0/0            0.0.0.0/0           
        0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           mark match 0xa 
        0     0 NFQUEUE    all  --  *      *       0.0.0.0/0            0.0.0.0/0           NFQUEUE num 92
    
    Chain pgl_out (1 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 RETURN     all  --  *      *       0.0.0.0/0            192.168.2.0/24      
        0     0 RETURN     all  --  *      *       0.0.0.0/0            192.168.2.1         
        0     0 RETURN     all  --  *      lo      0.0.0.0/0            0.0.0.0/0           
        0     0 REJECT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           mark match 0xa reject-with icmp-port-unreachable 
        0     0 RETURN     all  --  *      *       0.0.0.0/0            224.0.0.251         
        0     0 RETURN     all  --  *      *       0.0.0.0/0            239.255.255.250     
        0     0 RETURN     all  --  *      *       0.0.0.0/0            224.0.0.22          
        0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:6667 
        0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:443 
        0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:80 
        0     0 NFQUEUE    all  --  *      *       0.0.0.0/0            0.0.0.0/0           NFQUEUE num 92
    
    Please check if the above printed iptables rules are correct!
    
     * pgld is not running
     * pglcmd.wd is running
    PID: 22814    CMD: /bin/sh /usr/sbin/pglcmd.wd
    
    gavin@kubuntu:~$ sudo pglcmd start
     * Starting PeerGuardian Linux pgld                                                        [fail] 
    gavin@kubuntu:~$ sudo pglcmd status
    Current IPv4 iptables rules (this may take a while):
    
    Chain INPUT (policy ACCEPT 8 packets, 5717 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        1    64 pgl_in     all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW mark match !0x14 
    
    Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 pgl_fwd    all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW mark match !0x14 
    
    Chain OUTPUT (policy ACCEPT 9 packets, 2572 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        1    64 pgl_out    all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW mark match !0x14 
    
    Chain pgl_fwd (1 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 RETURN     all  --  *      *       192.168.2.0/24       192.168.2.0/24      
        0     0 RETURN     all  --  *      *       0.0.0.0/0            192.168.2.1         
        0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           mark match 0xa 
        0     0 NFQUEUE    all  --  *      *       0.0.0.0/0            0.0.0.0/0           NFQUEUE num 92
    
    Chain pgl_in (1 references)
     pkts bytes target     prot opt in     out     source               destination         
        1    64 RETURN     all  --  *      *       192.168.2.0/24       0.0.0.0/0           
        0     0 RETURN     all  --  lo     *       0.0.0.0/0            0.0.0.0/0           
        0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           mark match 0xa 
        0     0 NFQUEUE    all  --  *      *       0.0.0.0/0            0.0.0.0/0           NFQUEUE num 92
    
    Chain pgl_out (1 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 RETURN     all  --  *      *       0.0.0.0/0            192.168.2.0/24      
        0     0 RETURN     all  --  *      *       0.0.0.0/0            192.168.2.1         
        0     0 RETURN     all  --  *      lo      0.0.0.0/0            0.0.0.0/0           
        0     0 REJECT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           mark match 0xa reject-with icmp-port-unreachable 
        1    64 RETURN     all  --  *      *       0.0.0.0/0            224.0.0.251         
        0     0 RETURN     all  --  *      *       0.0.0.0/0            239.255.255.250     
        0     0 RETURN     all  --  *      *       0.0.0.0/0            224.0.0.22          
        0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:6667 
        0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:443 
        0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:80 
        0     0 NFQUEUE    all  --  *      *       0.0.0.0/0            0.0.0.0/0           NFQUEUE num 92
    
    Please check if the above printed iptables rules are correct!
    
     * pgld is not running
     * pglcmd.wd is running
    PID: 22814    CMD: /bin/sh /usr/sbin/pglcmd.wd
    
    gavin@kubuntu:~$ sudo pglcmd restart
     * Restarting PeerGuardian Linux pgld                                                      [ OK ] 
    gavin@kubuntu:~$ sudo pglcmd status
    Current IPv4 iptables rules (this may take a while):
    
    Chain INPUT (policy ACCEPT 6 packets, 1009 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 pgl_in     all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW mark match !0x14 
    
    Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 pgl_fwd    all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW mark match !0x14 
    
    Chain OUTPUT (policy ACCEPT 8 packets, 2602 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 pgl_out    all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW mark match !0x14 
    
    Chain pgl_fwd (1 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 RETURN     all  --  *      *       192.168.2.0/24       192.168.2.0/24      
        0     0 RETURN     all  --  *      *       0.0.0.0/0            192.168.2.1         
        0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           mark match 0xa 
        0     0 NFQUEUE    all  --  *      *       0.0.0.0/0            0.0.0.0/0           NFQUEUE num 92
    
    Chain pgl_in (1 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 RETURN     all  --  *      *       192.168.2.0/24       0.0.0.0/0           
        0     0 RETURN     all  --  lo     *       0.0.0.0/0            0.0.0.0/0           
        0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           mark match 0xa 
        0     0 NFQUEUE    all  --  *      *       0.0.0.0/0            0.0.0.0/0           NFQUEUE num 92
    
    Chain pgl_out (1 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 RETURN     all  --  *      *       0.0.0.0/0            192.168.2.0/24      
        0     0 RETURN     all  --  *      *       0.0.0.0/0            192.168.2.1         
        0     0 RETURN     all  --  *      lo      0.0.0.0/0            0.0.0.0/0           
        0     0 REJECT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           mark match 0xa reject-with icmp-port-unreachable 
        0     0 RETURN     all  --  *      *       0.0.0.0/0            224.0.0.251         
        0     0 RETURN     all  --  *      *       0.0.0.0/0            239.255.255.250     
        0     0 RETURN     all  --  *      *       0.0.0.0/0            224.0.0.22          
        0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:6667 
        0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:443 
        0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:80 
        0     0 NFQUEUE    all  --  *      *       0.0.0.0/0            0.0.0.0/0           NFQUEUE num 92
    
    Please check if the above printed iptables rules are correct!
    
     * pgld is running
    PID: 23132    CMD: /usr/sbin/pgld -s -l /var/log/pgl/pgld.log -d -p /var/run/pgld.pid -q 92 -r 10 -a 20 /var/lib/pgl/master_blocklist.p2p
    
     * pglcmd.wd is running
    PID: 23141    CMD: /bin/sh /usr/sbin/pglcmd.wd
    
    gavin@kubuntu:~$

  9. #549
    Join Date
    Dec 2008
    Beans
    340
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: General MoBlock thread

    Hey jr I recently moved over to pgl

    (...)

    I have no idea what's going on but everything seems to be OK during the installation until a "configure pglcmd" menu came up and I pressed OK without changing anything and then the installation seem to abort halfway or whatever

    And whatever is installed is not working (tray icon remains gray even when I press start/restart/reload/update
    .
    Last edited by Jerriy; October 11th, 2011 at 08:36 PM.

  10. #550
    Join Date
    Dec 2008
    Beans
    340
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: General MoBlock thread

    Now I made a restart and get no error but a password question

Page 55 of 65 FirstFirst ... 5455354555657 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •