Hi, Thanks for the reply

moblock-control status is

Current iptables rules (this may take awhile):
Chain INPUT (policy ACCEPT 516K packets, 131M bytes)
pkts bytes target prot opt in out source destination
23 2954 moblock_in 0 -- * * 0.0.0.0/0 0.0.0.0/0 state NEW MARK match !0x14
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 DROP 0 -- * * 0.0.0.0/0 0.0.0.0/0 MARK match 0xa
0 0 moblock_fw 0 -- * * 0.0.0.0/0 0.0.0.0/0 state NEW MARK match !0x14
Chain OUTPUT (policy ACCEPT 597K packets, 648M bytes)
pkts bytes target prot opt in out source destination
0 0 REJECT 0 -- * * 0.0.0.0/0 0.0.0.0/0 MARK match 0xa reject-with icmp-port-unreachable
0 0 moblock_out 0 -- * * 0.0.0.0/0 0.0.0.0/0 state NEW MARK match !0x14
Chain moblock_fw (1 references)
pkts bytes target prot opt in out source destination
0 0 NFQUEUE 0 -- * * 0.0.0.0/0 0.0.0.0/0 NFQUEUE num 0
Chain moblock_in (1 references)
pkts bytes target prot opt in out source destination
0 0 RETURN 0 -- lo * 0.0.0.0/0 0.0.0.0/0
0 0 RETURN tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80
23 2954 NFQUEUE 0 -- * * 0.0.0.0/0 0.0.0.0/0 NFQUEUE num 0
Chain moblock_out (1 references)
pkts bytes target prot opt in out source destination
0 0 RETURN 0 -- * lo 0.0.0.0/0 0.0.0.0/0
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.28.93
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.106.46
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.106.24
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.106.95
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.108.50
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.108.37
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.106.17
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.108.17
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.106.30
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.108.39
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.108.36
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.106.20
0 0 RETURN 0 -- * * 0.0.0.0/0 65.54.179.216
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.108.23
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.106.16
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.106.23
0 0 RETURN 0 -- * * 0.0.0.0/0 207.46.108.57
0 0 RETURN 0 -- * * 0.0.0.0/0 65.54.239.140
0 0 RETURN 0 -- * * 0.0.0.0/0 65.54.239.20
0 0 RETURN tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80
0 0 NFQUEUE 0 -- * * 0.0.0.0/0 0.0.0.0/0 NFQUEUE num 0
Please check if the above printed iptables rules are correct!
* moblock is running, pid is 392.



and /etc/default/moblock is

# moblock.default - default configuration file for moblock-control

# In this file you can put any configuration variable from moblock.conf
# (/etc/moblock/moblock.conf). Values in moblock.conf will be overwritten by
# values in this file (moblock.default).
WHITE_TCP_OUT="http"
WHITE_IP_OUT="65.54.239.20 65.54.239.140 207.46.108.57 207.46.106.23 207.46.106.16 207.46.108.23 65.54.179.216 207.46.106.20 207.46.108.36 207.46.108.39 207.46.106.30 207.46.108.17 207.46.106.17 207.46.108.37 207.46.108.50 207.46.106.95 207.46.106.24 207.46.106.46 207.46.28.93"
WHITE_TCP_IN="http"