Page 3 of 24 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 233

Thread: HOWTO: Install Rubyripper on Ubuntu

  1. #21
    Join Date
    Aug 2008
    Beans
    18

    Re: HOWTO: Install Rubyripper 0.5.0 on Ubuntu 8.04

    Thanks for the install directions. I managed to install it. But Now when I try to rip it says LAME not found on system. Ihave already enabled LAME I think by installing Ubuntu restricted extras. What else could be wrong?

  2. #22
    Join Date
    May 2006
    Beans
    778
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: HOWTO: Install Rubyripper 0.5.0 on Ubuntu 8.04

    Quote Originally Posted by thomman View Post
    Thanks for the install directions. I managed to install it. But Now when I try to rip it says LAME not found on system. Ihave already enabled LAME I think by installing Ubuntu restricted extras. What else could be wrong?
    no, ubuntu-restricted-extras does not install lame. to install lame, go to the terminal and enter:
    Code:
    sudo aptitude install lame

  3. #23
    Join Date
    Jan 2006
    Location
    Lynchburg, VA (US)
    Beans
    278
    Distro
    Ubuntu 11.10 Oneiric Ocelot

    Re: HOWTO: Install Rubyripper 0.5.0 on Ubuntu 8.04

    This is a great program. Thanks for the tutorial ghindo. I'm wondering if if something is wrong with my setup though. I launched Rubyripper from terminal via "./rubyripper_gtk2.rb", and my drive has been whirring away for almost a half hour already. In the Rubyripper window, both of the progress percentages ("ripping progress" and "not yet started") have stayed at 0%, and the progress meter in the terminal is probably at about 30%. So going by the terminal's progress meter, the whole rip should take about an hour and a half. That just doesn't seem right.

    The cd wasn't terribly scratched... Here's my log so far:

    Code:
    This log is created by Rubyripper, version 0.5.2
    Website: http://code.google.com/p/rubyripper
    
    Cdrom player used to rip:
    HL-DT-ST RW/DVD GCC-4243N 1.01
    Cdrom offset used: 102
    
    Ripper used: cdparanoia -Z
    Matches required for all chunks: 2
    Matches required for erroneous chunks: 2
    
    Codec(s) used:
    -flac 	-> --best (flac 1.2.1)
    
    CDDB INFO
    
    Artist	= RUN KID RUN
    Album	= LOVE AT THE CORE
    Year	= 2008
    Genre	= Punk
    Tracks	= 10
    
    01 - Rescue Me
    02 - CAPTIVES COME HOME
    03 - Fall into the Light
    04 - One In A Million
    05 - LOVE AT THE CORE
    06 - Sure Shot
    07 - My Sweet Escape
    08 - The Emergency
    09 - SET THE DIAL
    10 - Freedom
    
    STATUS
    
    Starting to rip CD image, trial #1}
    Is this normal?

    If it's relevant, I'm ripping to a single file image, and encoding to flac.
    Linux user since January 31st, 2006.
    two ways to live :: the choice we all face

  4. #24
    Join Date
    Nov 2006
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: HOWTO: Install Rubyripper 0.5.0 on Ubuntu 8.04

    Quote Originally Posted by VCSkier View Post
    This is a great program. Thanks for the tutorial ghindo. I'm wondering if if something is wrong with my setup though. I launched Rubyripper from terminal via "./rubyripper_gtk2.rb", and my drive has been whirring away for almost a half hour already. In the Rubyripper window, both of the progress percentages ("ripping progress" and "not yet started") have stayed at 0%, and the progress meter in the terminal is probably at about 30%. So going by the terminal's progress meter, the whole rip should take about an hour and a half. That just doesn't seem right.

    The cd wasn't terribly scratched... Here's my log so far:

    Code:
    This log is created by Rubyripper, version 0.5.2
    Website: http://code.google.com/p/rubyripper
    
    Cdrom player used to rip:
    HL-DT-ST RW/DVD GCC-4243N 1.01
    Cdrom offset used: 102
    
    Ripper used: cdparanoia -Z
    Matches required for all chunks: 2
    Matches required for erroneous chunks: 2
    
    Codec(s) used:
    -flac 	-> --best (flac 1.2.1)
    
    CDDB INFO
    
    Artist	= RUN KID RUN
    Album	= LOVE AT THE CORE
    Year	= 2008
    Genre	= Punk
    Tracks	= 10
    
    01 - Rescue Me
    02 - CAPTIVES COME HOME
    03 - Fall into the Light
    04 - One In A Million
    05 - LOVE AT THE CORE
    06 - Sure Shot
    07 - My Sweet Escape
    08 - The Emergency
    09 - SET THE DIAL
    10 - Freedom
    
    STATUS
    
    Starting to rip CD image, trial #1}
    Is this normal?

    If it's relevant, I'm ripping to a single file image, and encoding to flac.
    I'm not entirely sure if this is normal, but if you're ripping an entire CD to one image, it may be. I would let it go for a bit longer, and if nothing changes then I would start getting worried.
    Want a quality CD ripping program for Ubuntu? Check out my how-to: Installing Rubyripper on Ubuntu!

  5. #25
    Join Date
    Aug 2008
    Beans
    18

    Re: HOWTO: Install Rubyripper 0.5.0 on Ubuntu 8.04

    Quote Originally Posted by Circus-Killer View Post
    no, ubuntu-restricted-extras does not install lame. to install lame, go to the terminal and enter:
    Code:
    sudo aptitude install lame
    Thanks I think Iv got it working now.

  6. #26
    Join Date
    Mar 2008
    Beans
    170

    Re: HOWTO: Install Rubyripper 0.5.0 on Ubuntu 8.04

    Great tutorial, bookmarked it for future reference. Seem to have a problem though, when I press the 'rip cd now' button rubyripper just closes and nothing happens. Has anyone else had this problem. Any ideas on how to solve it?

  7. #27
    Join Date
    Mar 2008
    Beans
    170

    Re: HOWTO: Install Rubyripper 0.5.0 on Ubuntu 8.04

    OK, so I ran rubyripper in the terminal and I got the following message

    Code:
    Use config file ~/.rubyripper/settings
    Audio-disc found, number of tracks : 10, total playlength : 68:38
    Fetching freedb info...
    
    FREEDB INFO
    Artist : Du Pré, Baker, Barbirolli (LSO)
    Album : Elgar: Cello Concerto Sea Pictures
    Genre : Classical
    Year : 2004
    
    Track 1 : Cockaigne (In London Town) Op.40
    Track 2 : Moderato
    Track 3 : 2.Lento
    Track 4 : 3.Adagio
    Track 5 : 4.Allegro
    Track 6 : 1.Sea Slumber song
    Track 7 : 2.In Heaven (Capri)
    Track 8 : 3.Sabbath Morning at Sea
    Track 9 : 4.Where Corals Lie
    Track 10 : 5.The Swimming
    
    
    Should all tracks be ripped ? (y/n)  [y] y
    Tracks to rip are 1 2 3 4 5 6 7 8 9 10
    Now here, class = Rubyripper
    /usr/local/lib/site_ruby/1.8/rr_lib.rb:113:in `get_filename': undefined method `varArtists' for #<Disc:0xb7bbc580> (NoMethodError)
    	from /usr/local/lib/site_ruby/1.8/rr_lib.rb:1343:in `prepare_dirs'
    	from /usr/local/lib/site_ruby/1.8/rr_lib.rb:1341:in `each'
    	from /usr/local/lib/site_ruby/1.8/rr_lib.rb:1341:in `prepare_dirs'
    	from /usr/local/lib/site_ruby/1.8/rr_lib.rb:1274:in `settings_ok'
    	from /usr/local/bin/rrip_cli:280:in `freedb_finished'
    	from /usr/local/bin/rrip_cli:359:in `update'
    	from /usr/local/lib/site_ruby/1.8/rr_lib.rb:577:in `searchMetadata'
    	from /usr/local/lib/site_ruby/1.8/rr_lib.rb:557:in `freedb'
    	from /usr/local/bin/rrip_cli:265:in `get_cd_info'
    	from /usr/local/bin/rrip_cli:48:in `initialize'
    	from /usr/local/bin/rrip_cli:402:in `new'
    	from /usr/local/bin/rrip_cli:402
    I have also noticed that in the gui this cd has two sections for artist, even though one section is actually part of the title (see screenshot).I think this is causing the problem, since I managed to rip a different cd fine, but that one only had one artist field at the top of the screen. Still don't know what to do?
    Attached Images Attached Images

  8. #28
    Join Date
    Mar 2008
    Beans
    170

    Re: HOWTO: Install Rubyripper 0.5.0 on Ubuntu 8.04

    Turns out I was being extremely stupid. All I had to was uncheck the multiple artist box and it ripped fine. Can't believe it, didn't even notice that box until just now. doh..

  9. #29
    Join Date
    Nov 2006
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: HOWTO: Install Rubyripper 0.5.0 on Ubuntu 8.04

    Minor update: Changed from Rubyripper version 0.5.2 to 0.5.3.

    Fixes included in Rubyripper 0.5.3:
    ---------0.5.3 RELEASE------

    * fix detection of some devices
    * update Hungarian / German translation
    * fix permissions on install + other small config fixes
    * add totaltracks tag
    * add albumartist tag
    * add support for lame 3.98: all genre tags now allowed
    * mention the artist / album in the summary page
    * add accelerator keys
    * encoding errors are now always reported
    * support weird characters in tags, while disabling in the filename
    * small fixes here and there
    Want a quality CD ripping program for Ubuntu? Check out my how-to: Installing Rubyripper on Ubuntu!

  10. #30
    Join Date
    Aug 2008
    Location
    NW Arkansas
    Beans
    43
    Distro
    Xubuntu 10.10 Maverick Meerkat

    Re: HOWTO: Install Rubyripper 0.5.0 on Ubuntu 8.04

    I followed the install directions. Got Rubyripper up and running, no problems. It is a very nice mp3 ripper, far better than the other ones I've used. Thank you for this HowTo thread.
    Ubuntu User #24005, Linux User #480025

Page 3 of 24 FirstFirst 1234513 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •