dmesg states the following:
Code:
[ 30.584506] ata6.00: ATA-6: WDC WD800JB-00ETA0, 77.07W77, max UDMA/100
[ 30.584521] ata6.00: limited to UDMA/33 due to 40-wire cable
[ 30.600429] ata6.00: configured for UDMA/33
This is wrong, it is *not* a 40 wire cable, even windows (sigh) detects it as udma/100.
hdparm -I states the following:
Code:
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
IDE Chipset is Nforce3.
Ive tried irqpool kernel option, didnt help.
Any ideas? DMA/33 sucks.
Bookmarks