Page 30 of 32 FirstFirst ... 202829303132 LastLast
Results 291 to 300 of 312

Thread: Installing BCM94311MCG wlan mini-PCI on 7.10 & 8.04 - Broadcom wifi on a HP dv9000

  1. #291
    Join Date
    Nov 2008
    Beans
    2

    Re: Installing BCM94311MCG wlan mini-PCI on 7.10 & 8.04 - Broadcom wifi on a HP dv900

    Quote Originally Posted by Ayuthia View Post
    To my understanding, Linux should not change how your wireless works in Windows. You might try and see if there is a troubleshooting button for your wireless in XP. It might fix the problem for you.

    Thank you Ayuthia, I tried and tried and finally I follow your advice and called to the internet provider... and fix the problem

    This problem happened Simultaneously I fixed ubuntu connection...what a coincidence!;

    Total 5 days spended, but, with this tutorial resolve the problem in 5 minutes... and I've got a life to enjoy Linux

    Thank You very Much!!!!

    Óscar

  2. #292
    Join Date
    May 2008
    Location
    Tunis
    Beans
    85
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: Installing BCM94311MCG wlan mini-PCI on 7.10 & 8.04 - Broadcom wifi on a HP dv900

    I have the same Broadcom card in HP Pavilion dv6420em, it works for me with Ubuntu 8.04

    Note that with Ubuntu 8.10 I tried Broadcom STA wireless driver and know it works fine and much better then before.

  3. #293
    Join Date
    May 2008
    Location
    Tunis
    Beans
    85
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: Installing BCM94311MCG wlan mini-PCI on 7.10 & 8.04 - Broadcom wifi on a HP dv900

    I have the same Broadcom card in HP Pavilion dv6420em, it works for me with Ubuntu 8.04

    Note that with Ubuntu 8.10 I tried Broadcom STA wireless driver and know it works fine and much better then before.

  4. #294
    Join Date
    Oct 2008
    Beans
    8

    Re: Installing BCM94311MCG wlan mini-PCI on 7.10 & 8.04 - Broadcom wifi on a HP dv900

    I have a Compaq C705LA (C700) with a broadcom Wireless Card.
    I started with ubunto 8.04 Hardy, and i was great, but i havn't wireless capabilities. I tried everithing in the Foros, but nothing.
    I was just about to return to windows and...
    updated to Ubuntu 8.10 and voila! problem solved

    Best regards...

  5. #295
    Join Date
    Aug 2008
    Location
    Buenos Aires
    Beans
    37
    Distro
    Ubuntu 7.10 Gutsy Gibbon

    Angry Re: Installing BCM94311MCG wlan mini-PCI on 7.10 & 8.04 - Broadcom wifi on a HP dv900

    Ugh, everything goes well till step 7. This is what happens in my terminal
    estela@estela-laptop:~/bcm43xx/ndiswrapper/ndiswrapper-1.53$ make distclean
    make -C driver clean
    make[1]: Entering directory `/home/estela/bcm43xx/ndiswrapper/ndiswrapper-1.53/driver'
    Makefile:34: *** Cannot find kernel version in /usr/src/linux-2.6.22-16-generic, is it configured?. Stop.
    make[1]: Leaving directory `/home/estela/bcm43xx/ndiswrapper/ndiswrapper-1.53/driver'
    make: *** [clean] Error 2
    estela@estela-laptop:~/bcm43xx/ndiswrapper/ndiswrapper-1.53$
    Sueño para escapar. Escapo para soñar.

  6. #296
    Join Date
    Apr 2007
    Location
    Mount Horeb, WI
    Beans
    4,312
    Distro
    Kubuntu Development Release

    Re: Installing BCM94311MCG wlan mini-PCI on 7.10 & 8.04 - Broadcom wifi on a HP dv900

    Quote Originally Posted by E-Cecilia View Post
    Ugh, everything goes well till step 7. This is what happens in my terminal
    estela@estela-laptop:~/bcm43xx/ndiswrapper/ndiswrapper-1.53$ make distclean
    make -C driver clean
    make[1]: Entering directory `/home/estela/bcm43xx/ndiswrapper/ndiswrapper-1.53/driver'
    Makefile:34: *** Cannot find kernel version in /usr/src/linux-2.6.22-16-generic, is it configured?. Stop.
    make[1]: Leaving directory `/home/estela/bcm43xx/ndiswrapper/ndiswrapper-1.53/driver'
    make: *** [clean] Error 2
    estela@estela-laptop:~/bcm43xx/ndiswrapper/ndiswrapper-1.53$
    It looks like linux-headers is not installed. Please check in Synaptic to see if it is installed or post the results of:
    Code:
    aptitude search linux-headers

  7. #297
    Join Date
    Dec 2008
    Beans
    17

    Re: Installing BCM94311MCG wlan mini-PCI on 7.10 & 8.04 - Broadcom wifi on a HP dv900

    I neeed Help


    I got more option after i did this step

    when i right click on the wireless icon thingy, i get one more option which says "Enable Wireless"

    but it wont detect any wifi/router


    help please

    i have hp pavillion dv5z1000
    Atheros Driver

  8. #298
    Join Date
    Dec 2008
    Beans
    17

    Re: Installing BCM94311MCG wlan mini-PCI on 7.10 & 8.04 - Broadcom wifi on a HP dv900

    Omfg your da best!!!!!!!!!!!!!!


    Thanks a bunch !!!!!!!


    It works on hp pavillion dv5z-1000

    just to let everyone know

    thank you so much

  9. #299
    Join Date
    Jan 2009
    Beans
    2

    Exclamation Re: Installing BCM94311MCG wlan mini-PCI on 7.10 & 8.04 - Broadcom wifi on a HP dv900

    I'm having trouble deciphering these messages. I'm running 8.10, and have a Presario C751 NR. Can somebody explain this to me really simply?


    http://ubuntuforums.org/images/smili...cornsmiley.gif /Jack

  10. #300
    Join Date
    Jan 2009
    Beans
    2

    Exclamation Re: Installing BCM94311MCG wlan mini-PCI on 7.10 & 8.04 - Broadcom wifi on a HP dv900

    When I put this in the terminal:
    00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev a2)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Capabilities: <access denied>

    00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

    00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

    00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

    00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0

    00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Capabilities: <access denied>

    00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

    00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

    00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00004000-00004fff
    Memory behind bridge: b4000000-b5ffffff
    Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: <access denied>

    00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Memory behind bridge: b6000000-b7ffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: <access denied>

    00:05.0 VGA compatible controller [0300]: nVidia Corporation C51 [Geforce 6150 Go] [10de:0244] (rev a2) (prog-if 00 [VGA controller])
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 19
    Region 0: Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at b1000000 (64-bit, non-prefetchable) [size=16M]
    [virtual] Expansion ROM at 50000000 [disabled] [size=128K]
    Capabilities: <access denied>

    00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Capabilities: <access denied>

    00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Region 0: I/O ports at 1d00 [size=128]

    00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin A routed to IRQ 10
    Region 4: I/O ports at 3040 [size=64]
    Region 5: I/O ports at 3000 [size=64]
    Capabilities: <access denied>

    00:0a.3 Co-processor [0b40]: nVidia Corporation MCP51 PMU [10de:0271] (rev a3)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 10
    Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=256K]

    00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a3) (prog-if 10 [OHCI])
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>

    00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a3) (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 16
    Region 0: Memory at b0005000 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>

    00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev f1) (prog-if 8a [Master SecP PriP])
    Subsystem: Unknown device [f03c:30b7]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0 (750ns min, 250ns max)
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
    Region 4: I/O ports at 3080 [size=16]
    Capabilities: <access denied>

    00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev f1) (prog-if 85 [Master SecO PriO])
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 17
    Region 0: I/O ports at 30c0 [size=8]
    Region 1: I/O ports at 30b4 [size=4]
    Region 2: I/O ports at 30b8 [size=8]
    Region 3: I/O ports at 30b0 [size=4]
    Region 4: I/O ports at 3090 [size=16]
    Region 5: Memory at b0006000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>

    00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
    Memory behind bridge: b8000000-b80fffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: <access denied>

    00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0 (500ns min, 1250ns max)
    Interrupt: pin B routed to IRQ 20
    Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>

    00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a3)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0 (250ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at b0008000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at 30e0 [size=8]
    Capabilities: <access denied>

    00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Capabilities: <access denied>

    00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

    00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Capabilities: <access denied>

    03:00.0 Network controller [0280]: Broadcom Corporation BCM94311MCG wlan mini-PCI [14e4:4311] (rev 01)
    Subsystem: Hewlett-Packard Company Unknown device [103c:1363]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 21
    Region 0: Memory at b6000000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>

    07:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10 [OHCI])
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (500ns min, 1000ns max)
    Interrupt: pin A routed to IRQ 5
    Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>

    07:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64
    Interrupt: pin B routed to IRQ 7
    Region 0: Memory at b8000800 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>

    07:05.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 0a)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin B routed to IRQ 11
    Region 0: Memory at b8000c00 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>

    07:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 05)
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin B routed to IRQ 11
    Region 0: Memory at b8001000 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>

    07:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff)
    !!! Unknown header type 7f

    I got this:
    Latency: 0 (750ns min, 250ns max)
    Injack@jack-laptop:~$ Subsystem: Hewlett-Packard Company Presario V6133Cb7]103c:30
    terrupt: pin A routed to IRQ 17
    Region 0: I/O ports at 30c0 [sizbash: Subsystem:: command not found
    jack@jack-laptop:~$ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- e=8]
    Region 1: I/O ports at 30b4 [size=4]
    Region 2: I/O portbash: Control:: command not found
    jack@jack-laptop:~$ Status: Cap+ 66MHz+ UDF- Fast
    s at 30b8 [size=8]
    Region 3: Ibash: Status:: command not found
    jack@jack-laptop:~$
    jack@jack-laptop:~$ Interrupt: pin A routed to IRQ 19
    /O ports at 30b0 [size=4]
    Region 4:bash: Interrupt:: command not found
    jack@jack-laptop:~$ Region 0: Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
    bash: syntax error near unexpected token `('
    I/O ports at 3090 [size=16]
    Region 5: Memory at b0006000 (32-bit, jack@jack-laptop:~$ Region 1: Memo6M]at c0000000 (64-bit, prefetchable) [size=25
    bash: syntax error near unexpected token `('
    non-prefetchable) [size=4K]
    Capabilities: <access denied>

    00:10jack@jack-laptop:~$ Region 3: Memory at b1000000 (64-bit, non-prefetchable)e=16M]
    bash: syntax error near unexpected token `('
    .0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f
    jack@jack-laptop:~$ [virtual] Expansion ROM at 50000000 [disabled] [size=128K]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop
    bash: [virtual]: command not found
    jack@jack-laptop:~$ Capabilities: <access denied>
    bash: syntax error near unexpected token `newline'
    Status: Cap+ 66MHz+ UDF- Fast
    jack@jack-laptop:~$
    jack@jack-laptop:~$ 00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
    bash: syntax error near unexpected token `('
    Latency: 0
    Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
    Memory bejack@jack-laptop:~$ Subsystem: Hewlett-Packard Company Presariob7]133CL [103c:30
    hind bridge: b8000000-b80fffff
    Secondary status: 66MHz- FastB2B+bash: Subsystem:: command not found
    jack@jack-laptop:~$ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISbash: Control:: command not found
    jack@jack-laptop:~$ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    bash: MAbort-: No such file or directory
    A+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: <access denied>

    00:10.1 Audio device [0403]: nVjack@jack-laptop:~$ Latency: 0
    idia Corpora
    bash: Latency:: command not found
    jack@jack-laptop:~$ Capabilities
    Subsystem: H
    bash: Capabilities: command not found
    jack@jack-laptop:~$
    jack@jack-laptop:~$ 00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
    bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
    bash: Subsystem:: command not found
    jack@jack-laptop:~$ Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Latency: 0 (500ns min, 1250ns max)
    Interrupt: pin B routed to IRQ 20
    Region 0: Memory at bbash: Control:: command not found
    jack@jack-laptop:~$ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    0000000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>

    00:14.0 Bridge [06bash: MAbort-: No such file or directory
    jack@jack-laptop:~$ Laten
    80]: nV
    bash: Laten: command not found
    jack@jack-laptop:~$ Region 0: I/O ports at 1d00 [size=128]
    Subsystem: Hewlett-Packard Company Pre
    bash: Region: command not found
    jack@jack-laptop:~$
    jack@jack-laptop:~$ 00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepp
    bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
    bash: Subsystem:: command not found
    jack@jack-laptop:~$ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Latency: 0 (250ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at bbash: Control:: command not found
    jack@jack-laptop:~$ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >
    0008000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at 30e0 [size=8]
    bash: syntax error near unexpected token `newline'
    jack@jack-laptop:~$ Interrupt: pin A routed to IRQ 10
    Capabilities: <access denied>

    00:1bash: Interrupt:: command not found
    jack@jack-laptop:~$ Region 4: I/O ports at 3040 [size=64]
    8.0 Host bridge [0600]: Advanced Micro
    bash: Region: command not found
    jack@jack-laptop:~$ Region 5: I/O ports at 3000 [size=64]
    Control: I/O- Mem- BusMaster- SpecCyc
    bash: Region: command not found
    jack@jack-laptop:~$ Capabilities: <access denied>
    bash: syntax error near unexpected token `newline'
    Status: Cap+ 66MHz- UDF- Fast
    jack@jack-laptop:~$
    jack@jack-laptop:~$ 00:0a.3 Co-processor [0b40]: nVidia Corporation MCP51 PMU [10de:0271] (rev a3)
    bash: syntax error near unexpected token `('
    Capabilities: <access denied>

    00:18.1 Host bridge [0600]: Advanced Micro Devijack@jack-laptop:~$ Subsystem: Heb7]tt-Packard Company Presario V6133CL [103c:30
    ces [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
    Control:bash: Subsystem:: command not found
    jack@jack-laptop:~$ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- St
    bash: Control:: command not found
    jack@jack-laptop:~$ Status: Cap- 66MHz+ UDF- Fast
    Status: Cap- 66MHz- UDF- Fast
    bash: Status:: command not found
    jack@jack-laptop:~$ Latency: 0 (750ns min, 250ns max)

    00:18.2 Host bridge [060bash: syntax error near unexpected token `('0
    ]: Advanjack@jack-laptop:~$ Interrupt: pin B routed to IRQ 10
    ced Micro Devices [AMD] K8 [Athlon6
    bash: Interrupt:: command not found
    jack@jack-laptop:~$ Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=256K]
    bash: syntax error near unexpected token `('
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
    jack@jack-laptop:~$

    jack@jack-laptop:~$ 00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a3) (prog-if 10 [OHCI]

    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:11bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    03]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- bash: Subsystem:: command not found
    jack@jack-laptop:~$ Control: I/O+ Mem+ BusMaster+
    ParErr- Stepping- SERR- FastB2B-
    bash: Control:: command not found
    jack@jack-laptop:~$ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <
    bash: syntax error near unexpected token `newline'
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <
    jack@jack-laptop:~$ Latency: 0 (750ns min, 250ns max)
    Capabilities: <access denied>

    03bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Interrupt: pin A routed to IRQ 16
    :00.0 Network controller [0280]: Br
    bash: Interrupt:: command not found
    jack@jack-laptop:~$ Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=4K]
    bash: syntax error near unexpected token `('
    Subsystem: Hewlett-Packard Company Unknown device [103c:1363]
    Cojack@jack-laptop:~$ Capabilities: <access denied>
    bash: syntax error near unexpected token `newline'
    ntrol: I/O+ Mem+ BusMaster+ Spe
    jack@jack-laptop:~$
    jack@jack-laptop:~$ 00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a3) (prog-if 20 [EHCI])
    bash: syntax error near unexpected token `('
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cacjack@jack-laptop:~$ Subsystem: Hewlett-Packard Company Prb7]rio V6133CL [103c:30
    he Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 21
    Regionbash: Subsystem:: command not found
    jack@jack-laptop:~$ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    0: Memory at b6000000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>

    0bash: Control:: command not found
    jack@jack-laptop:~$ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    7:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-i
    bash: MAbort-: No such file or directory
    jack@jack-laptop:~$ Latency: 0 (750ns min, 250ns max)
    Subsystem: Hewlett-Packard Companbash: syntax error near unexpected token `('

    jack@jack-laptop:~$ Interrupt: pin B routed to IRQ 16
    Control: I/O- Mem+ BusMaster+ Spe
    bash: Interrupt:: command not found
    jack@jack-laptop:~$ Region 0: Memory at b0005000 (32-bit, non-prefetchable) [size=256]
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <
    bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Capabilities: <access denied>
    Latency: 64 (500ns min, 1000n
    bash: syntax error near unexpected token `newline'
    jack@jack-laptop:~$
    jack@jack-laptop:~$ 00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev f1) (prog-if 8a [Master SecP PriP])
    bash: syntax error near unexpected token `('
    Interrupt: pin A routed to IRQ 5
    Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=2K]
    Capabilitijack@jack-laptop:~$ Subsystem: Unknown device [f03c:30b7]
    es: <access denied>

    07:05.1 SD Host cobash: Subsystem:: command not found
    jack@jack-laptop:~$ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SER
    ntroller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822]
    bash: Control:: command not found
    jack@jack-laptop:~$

    jack@jack-laptop:~$ Latency: 0 (750ns min, 250ns max)
    Control: I/O- Mem+ BusMaster+ Spe
    bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >S
    bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
    Latency: 64
    Interrupt: pin B routed to IRQ 7
    Region 0: Memory at b8000800 (32-bit, bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
    bash: syntax error near unexpected token `('
    non-prefetchable) [size=256]
    Capabilities: <access denied>

    07:05.2 System peripheral jack@jack-laptop:~$ Region 3: [virtual] Memory at 00000370 (type 3, no
    [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [118
    bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Region 4: I/O ports at 3080 [size=16]
    Subsystem: Hewlett-Packard Company Pr
    bash: Region: command not found
    jack@jack-laptop:~$ Capabilities: <access denied>
    bash: syntax error near unexpected token `newline'
    Control: I/O- Mem+ BusMaster-
    jack@jack-laptop:~$

    jack@jack-laptop:~$ 00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev f1) (prog-if 85 [Master SecO PriO
    Interrupt: pin B routed to IRQ 11
    Region 0: Memory at b8000c00 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access dbash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b
    enied>

    07:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Mbash: Subsystem:: command not found
    jack@jack-laptop:~$ Control: I/O+ Mem+ BusMaster+
    emory Stick Bus Host Adapter [1
    bash: Control:: command not found
    jack@jack-laptop:~$ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    bash: MAbort-: No such file or directory
    Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
    Control: I/O- Mem+ BusMaster-jack@jack-laptop:~$ Latency: 0 (750ns min, 250ns max)
    SpecCycle- MemWINV- VGASnoop- ParEbash: syntax error near unexpected token `('

    jack@jack-laptop:~$ Interrupt: pin A routed to IRQ 17
    Status: Cap+ 66MHz- UDF- FastB2B-
    bash: Interrupt:: command not found
    jack@jack-laptop:~$ Region 0: I/O ports at 30c0 [size=8]
    Interrupt: pin B routed to IRQ 11
    Rbash: Region: command not found
    jack@jack-laptop:~$ Region 1: I/O ports at 30b4 [size=4]
    egion 0: Memory at b8001000 (32-bit, n
    bash: Region: command not found
    jack@jack-laptop:~$ Region 2: I/O ports at 30b8 [size=8]
    Capabilities: <access denied>

    07:05bash: Region: command not found
    jack@jack-laptop:~$ Region 3: I/O ports at 30b0 [size=4]
    .4 System peripheral [0880]: Ricoh Co
    bash: Region: command not found
    jack@jack-laptop:~$ Region 4: I/O ports at 3090 [size=16]
    !!! Unknown header type 7fbash: Region: command not found
    jack@jack-laptop:~$ Region 5: Memory at b0006000 (32-bit, non-prefetchable) [size=4K]
    bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Capabilities: <access denied>
    bash: syntax error near unexpected token `newline'
    jack@jack-laptop:~$
    jack@jack-laptop:~$ 00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f
    bash: 00:10.0: command not found
    jack@jack-laptop:~$ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop
    bash: Control:: command not found
    jack@jack-laptop:~$ Status: Cap+ 66MHz+ UDF- Fast
    bash: Status:: command not found
    jack@jack-laptop:~$ Latency: 0
    bash: Latency:: command not found
    jack@jack-laptop:~$ Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
    bash: Bus:: command not found
    jack@jack-laptop:~$ Memory behind bridge: b8000000-b80fffff
    bash: Memory: command not found
    jack@jack-laptop:~$ Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    bash: MAbort-: No such file or directory
    jack@jack-laptop:~$ BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    bash: BridgeCtl:: command not found
    jack@jack-laptop:~$ Capabilities: <access denied>
    bash: syntax error near unexpected token `newline'
    jack@jack-laptop:~$
    jack@jack-laptop:~$ 00:10.1 Audio device [0403]: nVidia Corpora
    bash: 00:10.1: command not found
    jack@jack-laptop:~$ Subsystem: H
    bash: Subsystem:: command not found
    jack@jack-laptop:~$ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
    bash: Control:: command not found
    jack@jack-laptop:~$ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
    bash: Status:: command not found
    jack@jack-laptop:~$ Latency: 0 (500ns min, 1250ns max)
    bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Interrupt: pin B routed to IRQ 20
    bash: Interrupt:: command not found
    jack@jack-laptop:~$ Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=16K]
    bash: syntax error near unexpected token `('
    jack@jack-laptop:~$ Capabilities: <access denied>
    bash: syntax error near unexpected token `newline'
    jack@jack-laptop:~$
    jack@jack-laptop:~$ 00:14.0 Bridge [0680]: nV
    bash: 00:14.0: command not found
    jack@jack-laptop:~$ Subsystem: Hewlett-Packard Company Pre
    bash: Subsystem:: command not found
    jack@jack-laptop:~$ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepp
    bash: Control:: command not found
    jack@jack-laptop:~$ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
    bash: Status:: command not found

    It keeps saying "command not found" and "syntax error near unexpected token". Help!!!

Page 30 of 32 FirstFirst ... 202829303132 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •