the program is working great for me, the bad thing is that i can my fingerprint and after that i want to verify it...and guess what ? doesn´t recognized it
the program is working great for me, the bad thing is that i can my fingerprint and after that i want to verify it...and guess what ? doesn´t recognized it
Trying to use the versions in the Intrepid repo of both fprint and thinkfinger results in hardware not found, even using sudo, on my Vaio VGN-TZ130N. Any ideas?
Everything else works splendidly with minimal effort which says a lot about the impact of this thread!
Trying to use the versions in the Intrepid repo of both fprint and thinkfinger results in hardware not found, even using sudo, on my Vaio VGN-TZ130N. Any ideas?
Everything else works splendidly with minimal effort which says a lot about the impact of this thread!
Hey thanks chase809
I was looking long time for the causes about that problem
A real help that appear like a surprise and in a place looking for other subject..
http://ubuntuforums.org/showthread.p...54#post6307354
I have an ASUS F6A with this fingerprint reader :
The first time I have used the reader, it worked well :Code:Bus 002 Device 002: ID 04f2:b029 Chicony Electronics Co., Ltd
but the second time it didn't work :Code:campo@enterprise:/usr/src/fprint_demo-0.4$ sudo pam_fprint_enroll This program will enroll your finger, unconditionally overwriting any selected print that was enrolled previously. If you want to continue, press enter, otherwise hit Ctrl+C Found device claimed by AuthenTec AES1610 driver Opened device. It's now time to enroll your finger. You will need to successfully scan your Right Index Finger 1 times to complete the process. Scan your finger now. Enroll complete! Enrollment completed!
Someone can help me ? Thanks in advice for the answer and sorry for my english.Code:campo@enterprise:/usr/src/fprint_demo-0.4$ sudo pam_fprint_enroll This program will enroll your finger, unconditionally overwriting any selected print that was enrolled previously. If you want to continue, press enter, otherwise hit Ctrl+C Found device claimed by AuthenTec AES1610 driver aeslib:error [do_write_regv] bulk write error -2 fp:error [fp_dev_open] device initialisation failed, driver=aes1610 Could not open device.
P.S. I have a Kubuntu 8.04 with custom kernel ( 2.6.28 )
P.P.S. I think that the reader remains locked so fprint_demo couldn't open device.
Last edited by campo85; January 2nd, 2009 at 01:35 PM.
i did that, first i couldnt log on, and then the X server failed on me!
Nicely done... seems to (almost) work. I have a AES1610, supposedly support. I use sudo to execute both pam_fprint_enroll and/or fprint_demo:
$ sudo pam_fprint_enroll
This program will enroll your finger, unconditionally overwriting any selected print that was enrolled previously. If you want to continue, press enter, otherwise hit Ctrl+C
Found device claimed by AuthenTec AES1610 driver
Opened device. It's now time to enroll your finger.
You will need to successfully scan your Right Index Finger 1 times to complete the process.
Scan your finger now.
Segmentation fault
$
The segmentation fault occurs in both the gui and with pam when I swipe my finger. Any ideas?
Ubuntu 8.10:
$ uname -a
Linux server 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686 GNU/Linux
Last edited by washakie; January 15th, 2009 at 11:15 PM.
I can't run aes2501 on my HP nc8430, ubuntu 8.10 amd64.
Here are the details:
$ lsusb
Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
$ sudo apt-get install aes2501-wy
$ sudo apt-get install libfprint0 libpam-fprint fprint-demo
All went fine.
$ sudo aes2501
argc=1 Initializing, please standby...
No device found
$ sudo fprint_demo
aeslib:error [do_write_regv] bulk write error -2
fp:error [fp_dev_open] device initialisation failed, driver=aes2501
It shows the device with a status message "Could not open the device".
Any idea? Thanks!
I didn't read all the posts here and don't know if anyone already has mentioned it. I think that in point 5 of the Howto it should be
instead of auth required in the second line.Code:auth sufficient pam_fprint.so auth requisite pam_unix.so nullok_secure
When there is auth required, my computer asks me always to enroll my finger AND to insert a password. When I change it to auth requisite, it only asks me my password if the fingerprint authentication failes.
Bookmarks