HOWTO: Making ICM532 chipset based webcams work on breezy

[cchevy]

Compile it and I'll host it !

Just send me the link on pvt.

[shields]

There needs to be a new thread started with the title:
"How to make webcams work on Gutsy."

[newOldUser]

I have compiled the driver and cchevy has posted it at: http://365.com.mk/video/andrej/gspca.ko

On my Xubuntu 7.10 system the driver is placed in the following directory:
/lib/modules/2.6.22-14-generic/kernel/drivers/usb/media/

If you don't have this directory then my guess is you have a different kernal version then me and the driver may not work for you. In a terminal do the command:
uname -r
or
uname -a
If you have 2.6.22 then there's a good chance it may work. Creating the driver wasn't hard if you follow the directions noted in my previous post.

The driver name is gspca.ko

File information:
ls -l gspca*
-rw-r--r-- 1 root root 960780 2007-11-15 18:13 gspca.ko

system information:
uname -a
Linux uServer 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007
i686 GNU/Linux

After installing the driver and attaching your camera enter this in a terminal

dmesg

you should see some message about a usb device being added (that's your camera)

sudo modprobe gspca

this will try to associate the driver with the camera

dmesg

with any luck you'll see some lines at the bottom about the driver initiating.


If you didn't receive any errors then the driver may be working.

Enter the command

tail /var/log/messages

this will show you the last 20 or 30 system messages. Sometimes the gspca driver starts spitting out error messages. You can issue this command as many times as you like and there may be new messages to help you understand why the driver is or is not working.

Good luck

[diablo75]

I need some help please. I have Ubuntu Gutsy, and the guide (at least the first of 33 pages of posts) don't include Gutsy. I'm assuming the install is similar or the same, but I just want to be sure so I don't screw anything up.

I have a (0733:0401) ViewQuest Technologies, Inc. CS330 WebCam.

What's the best way to get this thing running?

[HepBak]

Some of you probably might have noticed ICM532 chipset based webcams freezing on breezy (for a comprehensive list refer to: http://mxhaard.free.fr/spca5xx.html ) when u turn on gnomemeeting or camorama. Herez the fix for that:
FOLLOW ALL THE STEPS! DONT TAKE SHORTCUTS OR MAKE MODIFICATIONS IF YOU DON'T KNOW WHAT YOU ARE DOING
You need to do the following step by step

FOR DAPPER and EDGY
If you are on Dapper or Edgy do the following instead of the above:

sudo apt-get install linux-headers-`uname -r` linux-restricted-modules-`uname -r` build-essential
wget http://mxhaard.free.fr/spca50x/Download/spca5xx-20060501.tar.gz
tar xvfz spca5xx-20060501.tar.gz
cd spca5xx-20060501
make
sudo modprobe -r spca5xx
sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/usb/media/spca5xx*
sudo make install
sudo modprobe spca5xx

FOR BREEZY

sudo apt-get install linux-headers-`uname -r` linux-restricted-modules-`uname -r` build-essential gcc-3.4
wget http://mxhaard.free.fr/spca50x/Download/spca5xx-20060501.tar.gz
tar xvfz spca5xx-20060501.tar.gz
cd spca5xx-20060501
sudo make CC=gcc-3.4
sudo modprobe -r spca5xx
sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/usb/media/spca5xx*
sudo make install
sudo modprobe spca5xx

Now you should be all set to use ur ICM532 chipset based webcam.

i try to set ICM532 but...

root@HEPBAK:/home/koko/spca5xx-20060501# sudo make CC=gcc-3.4
Building SPCA5XX driver for 2.5/2.6 kernel.
Remember: you must have read/write access to your kernel source tree.
make -C /lib/modules/`uname -r`/build SUBDIRS=/home/koko/spca5xx-20060501 CC=gcc-3.4 modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.27-12-generic'
scripts/Makefile.build:46: *** CFLAGS was changed in "/home/koko/spca5xx-20060501/Makefile". Fix it to use EXTRA_CFLAGS. Stop.
make[1]: *** [_module_/home/koko/spca5xx-20060501] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.27-12-generic'
make: *** [default] Error 2

give me some help please

[szirakitamas]

Hi!
Instead of this: http://mxhaard.free.fr/spca50x/Downl...0060501.tar.gz use this:
http://mxhaard.free.fr/spca50x/Downl...0071224.tar.gz
maybe!
and of course instead of all spca5xx-20060501 use gspcav1-20071224

[elcisitiak]

Okay, I know this is an old topic but how can I make this all work on Jaunty? I get error messages:

rel@Set:~$ wget http://mxhaard.free.fr/spca50x/Download/gspcav1-20071224.tar.gz
--2009-05-31 23:22:07--  http://mxhaard.free.fr/spca50x/Download/gspcav1-20071224.tar.gz
Resolving mxhaard.free.fr... 212.27.63.150
Connecting to mxhaard.free.fr|212.27.63.150|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 214717 (210K) [application/x-gzip]
Saving to: `gspcav1-20071224.tar.gz'

100%[======================================>] 214,717     44.8K/s   in 5.3s    

2009-05-31 23:22:13 (39.8 KB/s) - `gspcav1-20071224.tar.gz' saved [214717/214717]

rel@Set:~$ tar xvfz gspcav1-20071224.tar.gz
gspcav1-20071224/
gspcav1-20071224/decoder/
gspcav1-20071224/decoder/gspcadecoder.c
gspcav1-20071224/decoder/gspcadecoder.h
gspcav1-20071224/decoder/gspcadecoder-OSX.c
gspcav1-20071224/decoder/gspcadecoder-OSX.h
gspcav1-20071224/Makefile
gspcav1-20071224/Vimicro/
gspcav1-20071224/Vimicro/vc032x_sensor.h
gspcav1-20071224/Vimicro/zc3xx.h
gspcav1-20071224/Vimicro/cs2102.h
gspcav1-20071224/Vimicro/vc032x.h
gspcav1-20071224/Vimicro/pas106b.h
gspcav1-20071224/Vimicro/icm105a.h
gspcav1-20071224/Vimicro/hv7131b.h
gspcav1-20071224/Vimicro/hv7131c.h
gspcav1-20071224/Vimicro/pb0330.h
gspcav1-20071224/Vimicro/ov7630c.h
gspcav1-20071224/Vimicro/mc501cb.h
gspcav1-20071224/Vimicro/tas5130c_vf0250.h
gspcav1-20071224/Vimicro/ov7620.h
gspcav1-20071224/Vimicro/tas5130c.h
gspcav1-20071224/Vimicro/hdcs2020.h
gspcav1-20071224/Etoms/
gspcav1-20071224/Etoms/et61xx51.h
gspcav1-20071224/Sonix/
gspcav1-20071224/Sonix/sn9cxxx.h
gspcav1-20071224/Sonix/sonix.h
gspcav1-20071224/utils/
gspcav1-20071224/utils/spcagamma.h
gspcav1-20071224/utils/spcausb.h
gspcav1-20071224/utils/spcaCompat.h
gspcav1-20071224/Conexant/
gspcav1-20071224/Conexant/cx11646.h
gspcav1-20071224/Conexant/cxlib.h
gspcav1-20071224/Pixart/
gspcav1-20071224/Pixart/pac207-OSX.h
gspcav1-20071224/Pixart/pac7311.h
gspcav1-20071224/Pixart/pac207.h
gspcav1-20071224/changelog
gspcav1-20071224/license
gspcav1-20071224/gspca_core.c
gspcav1-20071224/Transvision/
gspcav1-20071224/Transvision/tv8532.h
gspcav1-20071224/Makefile.kld
gspcav1-20071224/gspca.h
gspcav1-20071224/Sunplus/
gspcav1-20071224/Sunplus/spca501.dat
gspcav1-20071224/Sunplus/spca505.dat
gspcav1-20071224/Sunplus/spca508.dat
gspcav1-20071224/Sunplus/spca561-OSX.h
gspcav1-20071224/Sunplus/spca506.h
gspcav1-20071224/Sunplus/spca561.h
gspcav1-20071224/Sunplus/spca501_init.h
gspcav1-20071224/Sunplus/spca508_init-OSX.h
gspcav1-20071224/Sunplus/spca508_init.h
gspcav1-20071224/Sunplus/spca501_init-OSX.h
gspcav1-20071224/Sunplus/spca505_init.h
gspcav1-20071224/Sunplus-jpeg/
gspcav1-20071224/Sunplus-jpeg/spca500.dat
gspcav1-20071224/Sunplus-jpeg/jpeg_qtables.h
gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.h
gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.dat
gspcav1-20071224/Sunplus-jpeg/spca500_init.h
gspcav1-20071224/gspca_build
gspcav1-20071224/READ_AND_INSTALL
gspcav1-20071224/Mars-Semi/
gspcav1-20071224/Mars-Semi/mr97311.h
gspcav1-20071224/cutlog.py
rel@Set:~$ cd gspcav1-20071224
rel@Set:~/gspcav1-20071224$ make
make -C /lib/modules/`uname -r`/build SUBDIRS=/home/rel/gspcav1-20071224 CC=cc modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.28-11-generic'
  CC [M]  /home/rel/gspcav1-20071224/gspca_core.o
/home/rel/gspcav1-20071224/gspca_core.c:54:27: error: asm/semaphore.h: No such file or directory
/home/rel/gspcav1-20071224/gspca_core.c: In function ‘spca5xx_ioctl’:
/home/rel/gspcav1-20071224/gspca_core.c:2463: error: implicit declaration of function ‘video_usercopy’
/home/rel/gspcav1-20071224/gspca_core.c: At top level:
/home/rel/gspcav1-20071224/gspca_core.c:2609: error: unknown field ‘owner’ specified in initializer
/home/rel/gspcav1-20071224/gspca_core.c:2609: warning: initialization from incompatible pointer type
/home/rel/gspcav1-20071224/gspca_core.c:2611: error: unknown field ‘type’ specified in initializer
/home/rel/gspcav1-20071224/gspca_core.c: In function ‘spca50x_create_sysfs’:
/home/rel/gspcav1-20071224/gspca_core.c:2769: error: implicit declaration of function ‘video_device_create_file’
/home/rel/gspcav1-20071224/gspca_core.c:2780: error: implicit declaration of function ‘video_device_remove_file’
/home/rel/gspcav1-20071224/gspca_core.c: In function ‘spca5xx_probe’:
/home/rel/gspcav1-20071224/gspca_core.c:4301: error: incompatible types in assignment
make[2]: *** [/home/rel/gspcav1-20071224/gspca_core.o] Error 1
make[1]: *** [_module_/home/rel/gspcav1-20071224] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.28-11-generic'
make: *** [default] Error 2
rel@Set:~/gspcav1-20071224$ sudo modprobe -r spca5xx
FATAL: Module spca5xx not found.
rel@Set:~/gspcav1-20071224$ sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/usb/media/gspcav1*
rel@Set:~/gspcav1-20071224$ sudo make install
mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb/media/
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/spca5xx.ko
rm -f /lib/modules/`uname -r`/kernel/drivers/media/video/gspca.ko
install -c -m 0644 gspca.ko /lib/modules/`uname -r`/kernel/drivers/usb/media/
install: cannot stat `gspca.ko': No such file or directory
make: *** [install] Error 1
rel@Set:~/gspcav1-20071224$ sudo modprobe spca5xx
rel@Set:~/gspcav1-20071224$ rel@Set:~$ tar xvfz spca5xx-20060501.tar.gz
No such file or directory
/home/rel/gsbash: rel@Set:~$: command not found
rel@Set:~/gspcav1-20071224$ tar: spca5xx-20060501.tar.gz: Cannot open: No such file or directory
pcav1-20071224/gspca_core.c: In function ‘spca5xx_ioctl’:
/home/rbash: tar:: command not found
rel@Set:~/gspcav1-20071224$ tar: Error is not recoverable: exiting now
el/gspcav1-20071224/gspca_core.c:2463: erro
bash: tar:: command not found
rel@Set:~/gspcav1-20071224$ tar: Child returned status 2
/home/rel/gspcav1-20071224/g
bash: tar:: command not found
rel@Set:~/gspcav1-20071224$ tar: Error exit delayed from previous errors
/home/rel/gspcav1-20071224/gspca_core.c:2609
bash: tar:: command not found
rel@Set:~/gspcav1-20071224$ rel@Set:~$ cd spca5xx-20060501
/home/rel/gspcav1-20071224/gsp
bash: rel@Set:~$: command not found
rel@Set:~/gspcav1-20071224$ bash: cd: spca5xx-20060501: No such file or directory
/home/rel/gspcav1-20071224/gspca_core.c:2611: error: 
bash: bash:: command not found
rel@Set:~/gspcav1-20071224$ rel@Set:~$ make
/home/rel/gspca
bash: rel@Set:~$: command not found
rel@Set:~/gspcav1-20071224$ make: *** No targets specified and no makefile found.  Stop.
/home/rel/gspcav1-20071224/gspca_core.c:2769: error: implici
bash: make:: command not found
rel@Set:~/gspcav1-20071224$ rel@Set:~$ sudo modprobe -r spca5xx
/home/rel/gspcav1-20071224/gspca_co
bash: rel@Set:~$: command not found
rel@Set:~/gspcav1-20071224$ FATAL: Module spca5xx not found.
/home/rel/gspcav1-20071224/gspca
bash: FATAL:: command not found
rel@Set:~/gspcav1-20071224$ rel@Set:~$ sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/usb/media/spca5xx*rel@Set:~$ sudo make install
/home/rel/gspcav1-20071224/gspca_core.c:4301: error: incompatible types in assignment
make[2]: *** [/home/rebash: rel@Set:~$: command not found
rel@Set:~/gspcav1-20071224$ make: *** No rule to make target `install'.  Stop.
l/gspcav1-20071224/gspca_core.o] Error 1
make[1]: *> rel@Set:~$ sudo modprobe spca5xxsudo apt-get install linux-headers-`linux-restricted-modules-`uname -r` build-essential
> FATAL: Module spca5xxsudo not found.
> rel@Set:~$ wget http://mxhaard.free.fr/spca50x/Download/gspcav1-20071224.tar.gz
> --2009-05-31 23:22:07--  http://mxhaard.free.fr/spca50x/Download/gspcav1-20071224.tar.gz
> Resolving mxhaard.free.fr... 212.27.63.150
> Connecting to mxhaard.free.fr|212.27.63.150|:80... connected.
> HTTP request sent, awaiting response... 200 OK
> Length: 214717 (210K) [application/x-gzip]
> Saving to: `gspcav1-20071224.tar.gz'
> 
> 100%[======================================>] 214,717     44.8K/s   in 5.3s    
> 
> 2009-05-31 23:22:13 (39.8 KB/s) - `gspcav1-20071224.tar.gz' saved [214717/214717]
bash: command substitution: line 1: unexpected EOF while looking for matching `''
** [_module_/home/rel/gspcav1-20071224] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.28-11-generic'
make: *** [default] Error 2
rel@Set:~/gspcav1-20071224$ sudo modprobe -r spca5xx
FATAL: Module spca5xx not found.
rel@Set:~/gspcav1-20071224$ sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/usb/media/gspcav1*
rel@Set:~/gspcav1-20071224$ sudo make install
mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb/media/
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/spca5xx.ko
rm -f /lib/modules/`uname -r`/kernel/drivers/media/video/gspca.ko
install -c -m 0644 gspca.ko /lib/modules/`uname -r`/kernel/drivers/usb/media/
install: cannot stat `gspca.ko': No such file or directory
make: *** [install] Error 1
bash: command substitution: line 3: syntax error: unexpected end of file
bash: linux-restricted-modules-: command not found
bash: build-essential: command not found
bash: FATAL:: command not found
bash: rel@Set:~$: command not found
bash: --2009-05-31: command not found
bash: Resolving: command not found
bash: :80...: command not found
bash: 212.27.63.150: command not found
bash: Connecting: command not found
bash: HTTP: command not found
bash: command substitution: line 8: syntax error near unexpected token `('
bash: command substitution: line 8: `Length: 214717 (210K) [application/x-gzip]'
bash: make:: command not found
rel@Set:~/gspcav1-20071224$ 
rel@Set:~/gspcav1-20071224$ rel@Set:~$ tar xvfz gspcav1-20071224.tar.gz
bash: rel@Set:~$: command not found
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/
bash: gspcav1-20071224/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/decoder/
bash: gspcav1-20071224/decoder/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/decoder/gspcadecoder.c
bash: gspcav1-20071224/decoder/gspcadecoder.c: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/decoder/gspcadecoder.h
bash: gspcav1-20071224/decoder/gspcadecoder.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/decoder/gspcadecoder-OSX.c
bash: gspcav1-20071224/decoder/gspcadecoder-OSX.c: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/decoder/gspcadecoder-OSX.h
bash: gspcav1-20071224/decoder/gspcadecoder-OSX.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Makefile
bash: gspcav1-20071224/Makefile: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/
bash: gspcav1-20071224/Vimicro/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/vc032x_sensor.h
bash: gspcav1-20071224/Vimicro/vc032x_sensor.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/zc3xx.h
bash: gspcav1-20071224/Vimicro/zc3xx.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/cs2102.h
bash: gspcav1-20071224/Vimicro/cs2102.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/vc032x.h
bash: gspcav1-20071224/Vimicro/vc032x.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/pas106b.h
bash: gspcav1-20071224/Vimicro/pas106b.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/icm105a.h
bash: gspcav1-20071224/Vimicro/icm105a.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/hv7131b.h
bash: gspcav1-20071224/Vimicro/hv7131b.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/hv7131c.h
bash: gspcav1-20071224/Vimicro/hv7131c.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/pb0330.h
bash: gspcav1-20071224/Vimicro/pb0330.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/ov7630c.h
bash: gspcav1-20071224/Vimicro/ov7630c.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/mc501cb.h
bash: gspcav1-20071224/Vimicro/mc501cb.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/tas5130c_vf0250.h
bash: gspcav1-20071224/Vimicro/tas5130c_vf0250.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/ov7620.h
bash: gspcav1-20071224/Vimicro/ov7620.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/tas5130c.h
bash: gspcav1-20071224/Vimicro/tas5130c.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Vimicro/hdcs2020.h
bash: gspcav1-20071224/Vimicro/hdcs2020.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Etoms/
bash: gspcav1-20071224/Etoms/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Etoms/et61xx51.h
bash: gspcav1-20071224/Etoms/et61xx51.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sonix/
bash: gspcav1-20071224/Sonix/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sonix/sn9cxxx.h
bash: gspcav1-20071224/Sonix/sn9cxxx.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sonix/sonix.h
bash: gspcav1-20071224/Sonix/sonix.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/utils/
bash: gspcav1-20071224/utils/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/utils/spcagamma.h
bash: gspcav1-20071224/utils/spcagamma.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/utils/spcausb.h
bash: gspcav1-20071224/utils/spcausb.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/utils/spcaCompat.h
bash: gspcav1-20071224/utils/spcaCompat.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Conexant/
bash: gspcav1-20071224/Conexant/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Conexant/cx11646.h
bash: gspcav1-20071224/Conexant/cx11646.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Conexant/cxlib.h
bash: gspcav1-20071224/Conexant/cxlib.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Pixart/
bash: gspcav1-20071224/Pixart/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Pixart/pac207-OSX.h
bash: gspcav1-20071224/Pixart/pac207-OSX.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Pixart/pac7311.h
bash: gspcav1-20071224/Pixart/pac7311.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Pixart/pac207.h
bash: gspcav1-20071224/Pixart/pac207.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/changelog
bash: gspcav1-20071224/changelog: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/license
bash: gspcav1-20071224/license: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/gspca_core.c
bash: gspcav1-20071224/gspca_core.c: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Transvision/
bash: gspcav1-20071224/Transvision/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Transvision/tv8532.h
bash: gspcav1-20071224/Transvision/tv8532.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Makefile.kld
bash: gspcav1-20071224/Makefile.kld: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/gspca.h
bash: gspcav1-20071224/gspca.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/
bash: gspcav1-20071224/Sunplus/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/spca501.dat
bash: gspcav1-20071224/Sunplus/spca501.dat: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/spca505.dat
bash: gspcav1-20071224/Sunplus/spca505.dat: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/spca508.dat
bash: gspcav1-20071224/Sunplus/spca508.dat: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/spca561-OSX.h
bash: gspcav1-20071224/Sunplus/spca561-OSX.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/spca506.h
bash: gspcav1-20071224/Sunplus/spca506.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/spca561.h
bash: gspcav1-20071224/Sunplus/spca561.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/spca501_init.h
bash: gspcav1-20071224/Sunplus/spca501_init.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/spca508_init-OSX.h
bash: gspcav1-20071224/Sunplus/spca508_init-OSX.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/spca508_init.h
bash: gspcav1-20071224/Sunplus/spca508_init.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/spca501_init-OSX.h
bash: gspcav1-20071224/Sunplus/spca501_init-OSX.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus/spca505_init.h
bash: gspcav1-20071224/Sunplus/spca505_init.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus-jpeg/
bash: gspcav1-20071224/Sunplus-jpeg/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus-jpeg/spca500.dat
bash: gspcav1-20071224/Sunplus-jpeg/spca500.dat: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus-jpeg/jpeg_qtables.h
bash: gspcav1-20071224/Sunplus-jpeg/jpeg_qtables.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.h
bash: gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.dat
bash: gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.dat: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Sunplus-jpeg/spca500_init.h
bash: gspcav1-20071224/Sunplus-jpeg/spca500_init.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/gspca_build
bash: gspcav1-20071224/gspca_build: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/READ_AND_INSTALL
bash: gspcav1-20071224/READ_AND_INSTALL: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Mars-Semi/
bash: gspcav1-20071224/Mars-Semi/: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/Mars-Semi/mr97311.h
bash: gspcav1-20071224/Mars-Semi/mr97311.h: No such file or directory
rel@Set:~/gspcav1-20071224$ gspcav1-20071224/cutlog.py
bash: gspcav1-20071224/cutlog.py: No such file or directory
rel@Set:~/gspcav1-20071224$ rel@Set:~$ cd gspcav1-20071224
bash: rel@Set:~$: command not found
rel@Set:~/gspcav1-20071224$ rel@Set:~/gspcav1-20071224$ make
bash: rel@Set:~/gspcav1-20071224$: No such file or directory
rel@Set:~/gspcav1-20071224$ make -C /lib/modules/`uname -r`/build SUBDIRS=/home/rel/gspcav1-20071224 CC=cc modules
make: Entering directory `/usr/src/linux-headers-2.6.28-11-generic'
  CC [M]  /home/rel/gspcav1-20071224/gspca_core.o
/home/rel/gspcav1-20071224/gspca_core.c:54:27: error: asm/semaphore.h: No such file or directory
/home/rel/gspcav1-20071224/gspca_core.c: In function ‘spca5xx_ioctl’:
/home/rel/gspcav1-20071224/gspca_core.c:2463: error: implicit declaration of function ‘video_usercopy’
/home/rel/gspcav1-20071224/gspca_core.c: At top level:
/home/rel/gspcav1-20071224/gspca_core.c:2609: error: unknown field ‘owner’ specified in initializer
/home/rel/gspcav1-20071224/gspca_core.c:2609: warning: initialization from incompatible pointer type
/home/rel/gspcav1-20071224/gspca_core.c:2611: error: unknown field ‘type’ specified in initializer
/home/rel/gspcav1-20071224/gspca_core.c: In function ‘spca50x_create_sysfs’:
/home/rel/gspcav1-20071224/gspca_core.c:2769: error: implicit declaration of function ‘video_device_create_file’
/home/rel/gspcav1-20071224/gspca_core.c:2780: error: implicit declaration of function ‘video_device_remove_file’
/home/rel/gspcav1-20071224/gspca_core.c: In function ‘spca5xx_probe’:
/home/rel/gspcav1-20071224/gspca_core.c:4301: error: incompatible types in assignment
make[1]: *** [/home/rel/gspcav1-20071224/gspca_core.o] Error 1
make: *** [_module_/home/rel/gspcav1-20071224] Error 2
make: Leaving directory `/usr/src/linux-headers-2.6.28-11-generic'
rel@Set:~/gspcav1-20071224$ make[1]: Entering directory `/usr/src/linux-headers-2.6.28-11-generic'
>   CC [M]  /home/rel/gspcav1-20071224/gspca_core.o
> /home/rel/gspcav1-20071224/gspca_core.c:54:27: error: asm/semaphore.h: No such file or directory
> /home/rel/gspcav1-20071224/gspca_core.c: In function ‘spca5xx_ioctl’:
> /home/rel/gspcav1-20071224/gspca_core.c:2463: erro
> /home/rel/gspcav1-20071224/g
> /home/rel/gspcav1-20071224/gspca_core.c:2609
> /home/rel/gspcav1-20071224/gsp
> /home/rel/gspcav1-20071224/gspca_core.c:2611: error: 
> /home/rel/gspca
> /home/rel/gspcav1-20071224/gspca_core.c:2769: error: implici
> /home/rel/gspcav1-20071224/gspca_co
> /home/rel/gspcav1-20071224/gspca
> /home/rel/gspcav1-20071224/gspca_core.c:4301: error: incompatible types in assignment
> make[2]: *** [/home/rel/gspcav1-20071224/gspca_core.o] Error 1
> make[1]: *** [_module_/home/rel/gspcav1-20071224] Error 2
> make[1]: Leaving directory `/usr/src/linux-headers-2.6.28-11-generic'
> make: *** [default] Error 2
> rel@Set:~/gspcav1-20071224$ sudo modprobe -r spca5xx
> FATAL: Module spca5xx not found.
> rel@Set:~/gspcav1-20071224$ sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/usb/media/gspcav1*
> rel@Set:~/gspcav1-20071224$ sudo make install
> mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb/media/
> rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/spca5xx.ko
> rm -f /lib/modules/`uname -r`/kernel/drivers/media/video/gspca.ko
> install -c -m 0644 gspca.ko /lib/modules/`uname -r`/kernel/drivers/usb/media/
> install: cannot stat `gspca.ko': No such file or directory
bash: command substitution: line 1: unexpected EOF while looking for matching `''
bash: command substitution: line 18: syntax error: unexpected end of file
bash: make[1]:: command not found
rel@Set:~/gspcav1-20071224$ make: *** [install] Error 1
bash: make:: command not found

I get the feeling I'm missing something rather simple... help me?

[lng80]

I'm also having trouble getting this to work in Jaunty...bump.