Page 1 of 7 123 ... LastLast
Results 1 to 10 of 62

Thread: MagicSysRq keys for assistance with Ubuntu troubles

  1. #1
    Join Date
    Aug 2007
    Location
    Kottawa, Sri Lanka
    Beans
    7,387
    Distro
    Ubuntu 10.04 Lucid Lynx

    MagicSysRq keys for assistance with Ubuntu troubles

    This guide consists of four parts:-
    1) Introduction
    2) Restarting Ubuntu safely when it is frozen.
    3) Shutting down Ubuntu safely when it is frozen.
    4) Brief descriptions about the keys you can use in magic SysRq sequences.
    5) Controlling the use of SysRq keys.


    1) Introduction

    First off I would like to thank the creators of the different Linux Kernel documentation, tutorials and how-tos that made this possible, I would also like to thank pauper and Vadi for their help in this(in someway).

    The magic SysRq keys are key combinations within the Linux kernel that allows the user to perform various low level commands regardless of the system's state, except during kernel panics or freezes. It is often used to recover from X-Server freezes, or to reboot a computer without corrupting the filesystem.


    2) Restarting Ubuntu safely when it is frozen

    If anyone faces a freeze with Ubuntu where you cannot do anything, then this will certainly be helpful if you want to reboot the OS as cleanly as possible without damaging their HDD's or losing their data.

    In case of a freeze where you cannot do anything, simply press Alt+SysRq+R+S+E+I+U+B, keep in mind that the underlined keys must be kept pressed through the rest of the sequence AND that you will need to keep holding the sequence keys for a small period of time before going to the next one so that their actions can be carried out properly (For example, hold the R key for about 1-2 seconds before moving on to S). If the sequence does not work at first, then increase the time period between each sequence key press and try again.

    If anyone requires a good way of remembering the sequence R+S+E+I+U+B, just remember "Raising Skinny Elephants Is Utterly Boring".

    If someone requires a good description on what each keystroke does, here is something rather good:-

    Raw (take control of keyboard back from X), tErminate (kill -15 programs, allowing them to terminate gracefully), kIll (kill -9 unterminated programs), Sync (flush data to disk), Unmount (remount everything read-only), reBoot.

    NOTE:- This keystroke does not work in the event of a kernel freeze as the keystroke sequence depends on the kernel in order to unmount and make the required steps before the restart.


    3) Safely shutting down Ubuntu when it is frozen

    The key sequence to achieve this does not differ from the one used to restart Ubuntu safely except for the last key. So here it is as follows:-
    Alt+SysRq+R+S+E+I+U+O, keep in mind that as in the previous sequence, the underlined keys must be kept pressed through the rest of the sequence AND that you will need to keep holding the sequence keys for a small period of time before going to the next one so that their actions can be carried out properly.

    If someone requires a good description on what each keystroke here does, there is not much of a difference from the last one, except(Once again), the final key:-

    Raw (take control of keyboard back from X), tErminate (kill -15 programs, allowing them to terminate gracefully), kIll (kill -9 unterminated programs), Sync (flush data to disk), Unmount (remount everything read-only), shutdOwn.

    NOTE:- This keystroke does not work in the event of a kernel freeze as the keystroke sequence depends on the kernel in order to unmount and make the required steps before the shutdown.


    4) Brief descriptions about the keys you can use in magic SysRq sequences

    0 - 9 - sets the console log level, controlling which kernel messages will be printed to your console so that you don't get flooded.

    B - restarts the system without making steps to ensure that the conditions are good for a safe reboot, using this key alone is like doing a cold reboot.

    E - sends SIGTERM to all processes except init. This means that an attempt is done to end the current processes except init, safely, e.g. saving a document.

    F - call oom_kill(Out Of Memory Killer), which will kill a process that is consuming all available memory.

    H - displays help about the SysRq keys on a terminal though in actuality you can use any key except for the ones specified, to display help.

    I - sends SIGKILL to all processes except init. This means that all the processes except for init are killed, any data in processes that are killed will be lost.

    K - kills all processes on the current terminal. It is a bad idea to do this on a console where X is running as the GUI will stop and you can't see what you type, so you will need to switch to a tty after doing the magic SysRq.

    L - sends SIGKILL to all processes, including init. This means that every process including init will be killed, using this key will render your system non-functional and no further magicSysRq keys can be used. So in this case you will have to cold reboot it.

    M - dumps memory info to your console.

    O - shuts down the system via ACPI or in older systems, APM. As in key "B", using this key alone is like a cold reboot(Or in this case, a cold shutdown).

    P - dumps the current registers and flags to your console.

    Q - dumps all timers info to your console.

    R - takes keyboard and mouse control from the X server. This can be useful if the X-Server crashed, you can change to a console and kill the X-Server or check the error log.
    NOTE:- The documentation refers to this key's task as "Turns off keyboard raw mode and sets it to XLATE", but I suppose it's safe enough to assume that it takes back control from X.

    S - writes all data from the disc cache to the hard-discs, it is a sync and is necessary to reduce the chances of data corruption.

    T - dumps a list of current tasks and info to your console.

    U - remounts all mounted filesystems read-only. After using this key, you can reboot the system with Alt+SysRq+B without harming the system.

    W - dumps uninterruptable (blocked) state tasks.


    5) Controlling the use of SysRq keys.

    There are some ways of controlling the use of SysRq keys(i.e. what can be used, enabling or disabling them completely), two ways of doing this are:-
    1) Configuring the SysRq keys during kernel compilation itself.
    There isn't much here since you can only disable SysRq keys and not actually control or define what you can and can't use. The option you are looking for is:-
    Code:
    MAGIC_SYSRQ
    2) Using proc sysrq trigger calls.
    This is much more flexible than changing the configuration of the kernel but this has one downside with security which is explained after(since it is very minor). You use the echo command to achieve this for ease but you could also use any normal text editor to achieve this. Now the command is(you will need root permissions):-
    Code:
    echo * > /proc/sys/kernel/sysrq
    where "*" is a number, which can be any one of these:-
    0 - disable sysrq keys completely

    1 - enable all functions of sysrq

    2 - enable control of console logging level

    4 - enable control of keyboard (SAK, unraw)

    8 - enable debugging dumps of processes etc.

    16 - enable sync command

    32 - enable remount read-only

    64 - enable signalling of processes (term, kill, oom-kill)

    128 - allow reboot/poweroff

    256 - allow nicing of all RT tasks(control the nice level(priority) of Real Time tasks)

    So you can define what SysRq keys can be used, and also define whether they are all on or off. Also, there may be more ways of controlling the SysRq keys, but as of now the above two are the only ways I know of.

    Now for the "downside". For example you disable SysRq keys when you want to stop people(local) from doing key presses and then shutting down or messing up the PC during an important task(very obscure, I know). Now with configuring the kernel, you can stop SysRq keys from being used at all from the beginning of the boot process right uptil the end, with calling the proc sysrq triggers however, your option only takes place when it is executed(i.e. after the system has booted up) so there is a certain area of vulnerability with calling the triggers whereas there is no such thing in configuring the kernel, some people are that desperate to secure their systems to care about a few seconds, however do not blame me for it.


    Something about the magicSysRq keys is that they can be used in any sequence and in any way to achieve the required objective, for example you can just press Alt+SysRq+B to do something like a cold reboot.

    One more NOTE:- Even though this guide is made for Ubuntu, the magic SysRq keys can be used on other Linux distributions with little/no alterations.
    Last edited by PmDematagoda; December 14th, 2008 at 12:41 PM.
    Think carefully before executing commands containing "rm", especially "sudo rm -rf ", if you require more information concerning this matter, read this.
    I am an experimenter, give me the most stable OS and I can make it unstable in a few hours.

    C == seriously fast == FTW!

  2. #2
    Join Date
    Jun 2007
    Location
    SE Asia (expat)
    Beans
    340
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: The cleanest way of restarting Ubuntu when it is frozen

    Just in case anyone wants to know more about what this does
    see here http://en.wikipedia.org/wiki/Magic_SysRq_key

  3. #3
    Join Date
    May 2007
    Location
    Townsville, Australia
    Beans
    1,820
    Distro
    Lubuntu 14.04 Trusty Tahr

    Re: The cleanest way of restarting Ubuntu when it is frozen

    man!!!


    hate to try this with small hands!!!!

    ou almost need three hands to make it to press all the keys needed!

    thanks for the info
    Ubuntu user # 16304 www.nocleanfeed.com
    If someone asks you to sudo rm -rf anything, don't do it, and don't run any command with rm in it unless you know exactly what you're doing.things i have learnt changing from Xp pro to Ubuntu

  4. #4
    Join Date
    Jul 2007
    Beans
    Hidden!
    Distro
    Ubuntu 8.04 Hardy Heron

    Re: The cleanest way of restarting Ubuntu when it is frozen

    I usually use Alt+Ctrl+Backspace because it's usually the GUI which is hung. In most cases, recovery is complete enough for me to continue working.

    I did not know about the method in the OP but would have needed it only once or twice in a long time. Thanks anyway for posting here.
    ch
    In Switzerland we make it other
    with apologies to Gerard Hoffnung


  5. #5
    Join Date
    May 2006
    Location
    100acrewood
    Beans
    7,294
    Distro
    Kubuntu 17.10 Artful Aardvark

    Re: The cleanest way of restarting Ubuntu when it is frozen

    Interesting post... I will most definitely try it out next time my system freezes (sadly just happened this morning). Thanks, man.

  6. #6
    Join Date
    Oct 2007
    Beans
    55

    Re: The cleanest way of restarting Ubuntu when it is frozen

    We seem to have enough sticky threads already. Rather than make this one sticky it would be better to incorporate the posts with the key points of this thread into a thread that's already sticky. 8u)

  7. #7
    Join Date
    May 2006
    Beans
    449

    Re: The cleanest way of restarting Ubuntu when it is frozen

    Stinger, only Alt-Print Screen have to be held down LOL! The rest are press and release !! FYI ; )

  8. #8
    Join Date
    May 2007
    Beans
    4,513
    Distro
    Ubuntu

    Re: The cleanest way of restarting Ubuntu when it is frozen

    I was also told you should wait ~5 seconds after each command just to make sure it gets time to do it's stuff.

  9. #9
    Join Date
    Aug 2007
    Location
    Kottawa, Sri Lanka
    Beans
    7,387
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: The cleanest way of restarting Ubuntu when it is frozen

    Quote Originally Posted by Vadi View Post
    I was also told you should wait ~5 seconds after each command just to make sure it gets time to do it's stuff.
    Thank you very much Vadi, I forgot about that part and I included it now.
    Think carefully before executing commands containing "rm", especially "sudo rm -rf ", if you require more information concerning this matter, read this.
    I am an experimenter, give me the most stable OS and I can make it unstable in a few hours.

    C == seriously fast == FTW!

  10. #10
    Join Date
    Feb 2007
    Location
    St. Louis, MO
    Beans
    4,930
    Distro
    Ubuntu 20.04 Focal Fossa

    Re: The cleanest way of restarting Ubuntu when it is frozen

    I have 3 machines running Ubuntu and I have only had 2 OS lockups. It happens so rare I will forget that key combination.
    Windows, only good for gaming.

Page 1 of 7 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •