Results 1 to 4 of 4

Thread: [SOLVED] PVR-150 Boot issue

  1. #1
    Join Date
    Nov 2007
    Beans
    3
    Distro
    Ubuntu 7.10 Gutsy Gibbon

    [SOLVED] PVR-150 Boot issue

    Hi,

    I have just purchased a Hauppauge PVR-150 to add to my MythBuntu 7.10 setup.

    When I install the card the PC won't boot in MythBuntu, neither from HD nor from CD (WinXP boots fine).

    I have tried in 3 different PC's (both AMD and Intel procs.), but same result: boot's fine in WinXP but won't boot into MythBuntu 7.10.

    It always stop in the same place (see attached img).

    Regards Jan

    Update: Card has been returned to shop. Failed to install Hauppauge driver under WinXP.
    Attached Images Attached Images
    Last edited by bachmand; November 6th, 2007 at 11:51 AM. Reason: More info

  2. #2
    Join Date
    Nov 2006
    Location
    Oregon
    Beans
    4,388
    Distro
    Ubuntu Development Release

    Re: [SOLVED] PVR-150 Boot issue

    So you are saying that the card was bad?
    *Don't PM me directly for support, open a new thread
    *Looking for a MythTV quick start guide?

  3. #3
    Join Date
    Nov 2007
    Beans
    3
    Distro
    Ubuntu 7.10 Gutsy Gibbon

    Re: [SOLVED] PVR-150 Boot issue

    Quote Originally Posted by tgm4883 View Post
    So you are saying that the card was bad?
    Yes, just got the message from the Shop, they replaced the board. I will pick it up tomorrow and then see how it goes.

    /bachmand

  4. #4
    Join Date
    Nov 2007
    Beans
    3
    Distro
    Ubuntu 7.10 Gutsy Gibbon

    Re: [SOLVED] PVR-150 Boot issue - Follow UP

    It was the PVR-150 that was defctive. Just got a new board today, and everything seems to be working.

    ubuntu@ubuntu:~$ dmesg | grep -i ivtv
    [ 81.925971] ivtv: ==================== START INIT IVTV ====================
    [ 81.925975] ivtv: version 1.0.0 (2.6.22-14-generic SMP mod_unload 586 ) loading
    [ 81.926059] ivtv0: Autodetected Hauppauge card (cx23416 based)
    [ 81.926471] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
    [ 82.664156] ivtv0: loaded v4l-cx2341x-enc.fw firmware (3543646056 bytes)
    [ 82.878134] ivtv0: Encoder revision: 0x02050032
    [ 82.878137] ivtv0: Recommended firmware version is 0x02060039.
    [ 82.936950] ivtv0: Autodetected Hauppauge WinTV PVR-150
    [ 83.055246] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
    [ 83.058253] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
    [ 83.084426] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
    [ 86.363725] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
    [ 86.721772] ivtv0: Registered device video0 for encoder MPEG (4 MB)
    [ 86.722044] ivtv0: Registered device video32 for encoder YUV (2 MB)
    [ 86.722301] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
    [ 86.722476] ivtv0: Registered device video24 for encoder PCM audio (1 MB)
    [ 86.722762] ivtv0: Registered device radio0 for encoder radio
    [ 86.748501] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
    [ 86.748521] ivtv: ==================== END INIT IVTV ====================

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •