Page 90 of 98 FirstFirst ... 40808889909192 ... LastLast
Results 891 to 900 of 978

Thread: How To: Manual Network Configuration without the need for Network Manager

  1. #891
    Join Date
    Mar 2007
    Location
    Denver, CO
    Beans
    7,649
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: How To: Manual Network Configuration without the need for Network Manager

    Icehuck

    So yes the repetition you refer to means you are not being authenticated.

    Try this:

    ctrl_interface=/var/run/wpa_supplicant

    network={
    ssid="xb332"
    proto=WPA
    key_mgmt=WPA-PSK
    psk="mykey"
    pairwise=TKIP
    group=TKIP
    }


    Reading your output its weird since it states:
    Associated to a new BSS: BSSID=00:21:91:18:d4:2e
    No keys have been configured - skip key clearing
    Associated with 00:21:91:18:d4:2e

    Very strange on reviewing your post. It tells you that you are associated. Once you get this message and although the scrolling continues, can you try to request a dhcp address within another terminal window?

    t0mppa
    You may be right that your maximum rate may by 11 Mb/sec. You could try the following command to see if it makes a difference:

    sudo iwconfig wlan0 rate 54M

    or

    sudo iwconfig wlan0 rate 11M

    Typing ifconfig or iwconfig alone at the command line should give you the currently set rate.
    Last edited by kevdog; May 25th, 2009 at 01:17 PM.

  2. #892
    Join Date
    Dec 2007
    Location
    Chicago
    Beans
    Hidden!

    Re: How To: Manual Network Configuration without the need for Network Manager

    Quote Originally Posted by kevdog View Post
    Icehuck

    So yes the repetition you refer to means you are not being authenticated.

    Try this:

    ctrl_interface=/var/run/wpa_supplicant

    network={
    ssid="xb332"
    proto=WPA
    key_mgmt=WPA-PSK
    psk="mykey"
    pairwise=TKIP
    group=TKIP
    }


    Reading your output its weird since it states:
    Associated to a new BSS: BSSID=00:21:91:18:d4:2e
    No keys have been configured - skip key clearing
    Associated with 00:21:91:18:d4:2e

    Very strange on reviewing your post. It tells you that you are associated. Once you get this message and although the scrolling continues, can you try to request a dhcp address within another terminal window?
    .
    Ok, I tried the different wpa_supplicant.conf but it still just scolls and goes from Associated > Disconnected. Also tried to do request a dhcp lease but it times out.
    Hey, you created me. I didn't create some loser alter-ego to make myself feel better. Take some responsibility! -Tyler Durden, Fight Club

  3. #893
    Join Date
    Mar 2007
    Location
    Denver, CO
    Beans
    7,649
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: How To: Manual Network Configuration without the need for Network Manager

    IceHuck

    Can you give me some ideas on the wireless driver you are using and can you post the exact commands you are typing at the command line!?

  4. #894
    Join Date
    Dec 2007
    Location
    Chicago
    Beans
    Hidden!

    Re: How To: Manual Network Configuration without the need for Network Manager

    These are the commands I'm running inside from the CLI.

    sudo ifconfig wlan0 down
    sudo dhclient -r wlan0
    sudo wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf -d

    I'm having wpa_supplicant use the wext driver to connect. Though I'm not sure if this is correct. When I do lshw -C network it tells me the wifi driver is iwl3945. I'll post my lshw -C network, wpa_supplicant.conf below.


    lshw -C network

    Code:
    *-network               
           description: Wireless interface
           product: PRO/Wireless 3945ABG [Golan] Network Connection
           vendor: Intel Corporation
           physical id: 0
           bus info: pci@0000:02:00.0
           logical name: wmaster0
           version: 02
           serial: 00:1c:bf:0d:05:20
           width: 32 bits
           clock: 33MHz
           capabilities: pm msi pciexpress bus_master cap_list logical ethernet physical wireless
           configuration: broadcast=yes driver=iwl3945 ip=192.168.0.197 latency=0 module=iwl3945 multicast=yes wireless=IEEE 802.11abg
    wpa_supplicant.conf

    Code:
    ctrl_interface=/var/run/wpa_supplicant
    
    network={
    	ssid="xb332"
    	proto=WPA
    	key_mgmt=WPA-PSK
    	psk="brianne21"
    	pairwise=TKIP
    	group=TKIP
    }
    Having this setup gives me the output from the above post.
    Hey, you created me. I didn't create some loser alter-ego to make myself feel better. Take some responsibility! -Tyler Durden, Fight Club

  5. #895
    Join Date
    Mar 2007
    Location
    Denver, CO
    Beans
    7,649
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: How To: Manual Network Configuration without the need for Network Manager

    Can you post

    iwlist scan

    Is your ssid broadcast or hidden? I would suggest for the time being to broadcast the ssid.

    And lastly what if you just do this:

    network={
    ssid="xb332"
    psk="brianne21"
    }

    Make sure there is a blank line at the end of the file.

  6. #896
    Join Date
    Dec 2007
    Location
    Chicago
    Beans
    Hidden!

    Re: How To: Manual Network Configuration without the need for Network Manager

    Quote Originally Posted by kevdog View Post
    Can you post

    iwlist scan

    Is your ssid broadcast or hidden? I would suggest for the time being to broadcast the ssid.

    And lastly what if you just do this:

    network={
    ssid="xb332"
    psk="brianne21"
    }

    Make sure there is a blank line at the end of the file.
    My ssid is on broadcast. I will try changing my wpa_supplicant.conf to just those two lines. Before that, here is my iwlist scan.

    iwlist scan

    Code:
    iwlist scan
    lo        Interface doesn't support scanning.
    
    eth0      Interface doesn't support scanning.
    
    wmaster0  Interface doesn't support scanning.
    
    wlan0     Scan completed :
              Cell 01 - Address: 00:21:91:18:D4:2E
                        ESSID:"xb332"
                        Mode:Master
                        Channel:11
                        Frequency:2.462 GHz (Channel 11)
                        Quality=74/100  Signal level:-60 dBm  Noise level=-94 dBm
                        Encryption key:on
                        IE: Unknown: 00057862333332
                        IE: Unknown: 010482848B96
                        IE: Unknown: 03010B
                        IE: Unknown: 2A0100
                        IE: Unknown: 32080C1218243048606C
                        IE: WPA Version 1
                            Group Cipher : TKIP
                            Pairwise Ciphers (2) : TKIP CCMP
                            Authentication Suites (1) : PSK
                        IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                        IE: Unknown: 2D1A4E101BFFFF000000000000000000000000000000000000000000
                        IE: Unknown: 3D160B071B0000000F000000000000000000000000000000
                        IE: Unknown: DD1E00904C336E101BFFFF000000000000000000000000000000000000000000
                        IE: Unknown: DD1A00904C340B07030000000F000000000000000000000000000000
                        Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                                  9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                                  48 Mb/s; 54 Mb/s
                        Extra:tsf=0000000be043d180
                        Extra: Last beacon: 52ms ago
    
    pan0      Interface doesn't support scanning.
    Hey, you created me. I didn't create some loser alter-ego to make myself feel better. Take some responsibility! -Tyler Durden, Fight Club

  7. #897
    Join Date
    Dec 2007
    Location
    Chicago
    Beans
    Hidden!

    Re: How To: Manual Network Configuration without the need for Network Manager

    I made my config file say

    network={
    ssid="xb332"
    psk="brianne21"
    }

    I still get this output that continuously repeats. I also added dmesg | tail blow this

    Code:
    Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
    Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
    Reading configuration file '/etc/wpa_supplicant.conf'
    Priority group 0
       id=0 ssid='xb332'
    Initializing interface (2) 'wlan0'
    Interface wlan0 set UP - waiting a second for the driver to complete initialization
    SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
      capabilities: key_mgmt 0xf enc 0xf flags 0x0
    WEXT: Operstate: linkmode=1, operstate=5
    Own MAC address: 00:1c:bf:0d:05:20
    wpa_driver_wext_set_wpa
    wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_countermeasures
    wpa_driver_wext_set_drop_unencrypted
    RSN: flushing PMKID list in the driver
    Setting scan request: 0 sec 100000 usec
    EAPOL: SUPP_PAE entering state DISCONNECTED
    EAPOL: KEY_RX entering state NO_KEY_RECEIVE
    EAPOL: SUPP_BE entering state INITIALIZE
    EAP: EAP entering state DISABLED
    Added interface wlan0
    Ignore event for foreign ifindex 3
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b06 len=12
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Trying to get current scan results first without requesting a new scan to speed up initial association
    Received 0 bytes of scan results (0 BSSes)
    Cached scan results are empty - not posting
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    Try to find non-WPA AP
    No suitable AP found.
    Setting scan request: 0 sec 0 usec
    Starting AP scan (broadcast SSID)
    Scan requested (ret=0) - scan timeout 5 seconds
    EAPOL: disable timer tick
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b19 len=16
    Received 508 bytes of scan results (1 BSSes)
    CTRL-EVENT-SCAN-RESULTS 
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    0: 00:21:91:18:d4:2e ssid='xb332' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
       selected based on WPA IE
       selected WPA AP 00:21:91:18:d4:2e ssid='xb332'
    Trying to associate with 00:21:91:18:d4:2e (SSID='xb332' freq=2462 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
    WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK CCMP
    WPA: using KEY_MGMT WPA-PSK
    WPA: not using MGMT group cipher
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    wpa_driver_wext_set_drop_unencrypted
    State: SCANNING -> ASSOCIATING
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    wpa_driver_wext_associate
    wpa_driver_wext_set_psk
    Setting authentication timeout: 10 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b06 len=12
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b04 len=16
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8c02 len=216
    RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b15 len=24
    Wireless event: new AP: 00:21:91:18:d4:2e
    State: ASSOCIATING -> ASSOCIATED
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    Associated to a new BSS: BSSID=00:21:91:18:d4:2e
    No keys have been configured - skip key clearing
    Associated with 00:21:91:18:d4:2e
    WPA: Association event - clear replay counter
    WPA: Clear old PTK
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - portEnabled=1
    EAPOL: SUPP_PAE entering state CONNECTING
    EAPOL: enable timer tick
    EAPOL: SUPP_BE entering state IDLE
    Setting authentication timeout: 10 sec 0 usec
    Cancelling scan request
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b15 len=24
    Wireless event: new AP: 00:00:00:00:00:00
    Setting scan request: 0 sec 100000 usec
    Added BSSID 00:21:91:18:d4:2e into blacklist
    CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
    wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
    ioctl[SIOCSIWENCODEEXT]: No such file or directory
    Driver did not support SIOCSIWENCODEEXT
    State: ASSOCIATED -> DISCONNECTED
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    EAPOL: External notification - portEnabled=0
    EAPOL: SUPP_PAE entering state DISCONNECTED
    EAPOL: SUPP_BE entering state INITIALIZE
    EAPOL: External notification - portValid=0
    EAPOL: External notification - EAP success=0
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan requested (ret=0) - scan timeout 30 seconds
    EAPOL: startWhen --> 0
    EAPOL: disable timer tick
    Authentication with 00:00:00:00:00:00 timed out.
    Added BSSID 00:00:00:00:00:00 into blacklist
    No keys have been configured - skip key clearing
    State: SCANNING -> DISCONNECTED
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    EAPOL: External notification - EAP success=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan requested (ret=0) - scan timeout 30 seconds
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b19 len=16
    Received 506 bytes of scan results (1 BSSes)
    CTRL-EVENT-SCAN-RESULTS 
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    0: 00:21:91:18:d4:2e ssid='xb332' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
       selected based on WPA IE
       selected WPA AP 00:21:91:18:d4:2e ssid='xb332'
    Trying to associate with 00:21:91:18:d4:2e (SSID='xb332' freq=2462 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
    WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK CCMP
    WPA: using KEY_MGMT WPA-PSK
    WPA: not using MGMT group cipher
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    wpa_driver_wext_set_drop_unencrypted
    State: SCANNING -> ASSOCIATING
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    wpa_driver_wext_associate
    wpa_driver_wext_set_psk
    Setting authentication timeout: 10 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b06 len=12
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b04 len=16
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8c02 len=216
    RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b15 len=24
    Wireless event: new AP: 00:21:91:18:d4:2e
    State: ASSOCIATING -> ASSOCIATED
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    Associated to a new BSS: BSSID=00:21:91:18:d4:2e
    No keys have been configured - skip key clearing
    Associated with 00:21:91:18:d4:2e
    WPA: Association event - clear replay counter
    WPA: Clear old PTK
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - portEnabled=1
    EAPOL: SUPP_PAE entering state CONNECTING
    EAPOL: enable timer tick
    EAPOL: SUPP_BE entering state IDLE
    Setting authentication timeout: 10 sec 0 usec
    Cancelling scan request
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b15 len=24
    Wireless event: new AP: 00:00:00:00:00:00
    Setting scan request: 0 sec 100000 usec
    BSSID 00:21:91:18:d4:2e blacklist count incremented to 2
    CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
    wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
    ioctl[SIOCSIWENCODEEXT]: No such file or directory
    Driver did not support SIOCSIWENCODEEXT
    State: ASSOCIATED -> DISCONNECTED
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    EAPOL: External notification - portEnabled=0
    EAPOL: SUPP_PAE entering state DISCONNECTED
    EAPOL: SUPP_BE entering state INITIALIZE
    EAPOL: External notification - portValid=0
    EAPOL: External notification - EAP success=0
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan requested (ret=0) - scan timeout 30 seconds
    EAPOL: startWhen --> 0
    EAPOL: disable timer tick
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b19 len=16
    Received 506 bytes of scan results (1 BSSes)
    CTRL-EVENT-SCAN-RESULTS 
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    0: 00:21:91:18:d4:2e ssid='xb332' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
       skip - blacklisted
    Try to find non-WPA AP
    0: 00:21:91:18:d4:2e ssid='xb332' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
       skip - blacklisted
    No APs found - clear blacklist and try again
    Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
    Removed BSSID 00:21:91:18:d4:2e from blacklist (clear)
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    0: 00:21:91:18:d4:2e ssid='xb332' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
       selected based on WPA IE
       selected WPA AP 00:21:91:18:d4:2e ssid='xb332'
    Trying to associate with 00:21:91:18:d4:2e (SSID='xb332' freq=2462 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
    WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK CCMP
    WPA: using KEY_MGMT WPA-PSK
    WPA: not using MGMT group cipher
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    wpa_driver_wext_set_drop_unencrypted
    State: SCANNING -> ASSOCIATING
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    wpa_driver_wext_associate
    wpa_driver_wext_set_psk
    Setting authentication timeout: 10 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b06 len=12
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b04 len=16
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8c02 len=216
    RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b15 len=24
    Wireless event: new AP: 00:21:91:18:d4:2e
    State: ASSOCIATING -> ASSOCIATED
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    Associated with 00:00:00:00:00:00
    WPA: Association event - clear replay counter
    WPA: Clear old PTK
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - portEnabled=1
    EAPOL: SUPP_PAE entering state CONNECTING
    EAPOL: enable timer tick
    EAPOL: SUPP_BE entering state IDLE
    Setting authentication timeout: 10 sec 0 usec
    Cancelling scan request
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    Wireless event: cmd=0x8b15 len=24
    Wireless event: new AP: 00:00:00:00:00:00
    Setting scan request: 0 sec 100000 usec
    Added BSSID 00:21:91:18:d4:2e into blacklist
    CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
    wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
    ioctl[SIOCSIWENCODEEXT]: No such file or directory
    Driver did not support SIOCSIWENCODEEXT
    State: ASSOCIATED -> DISCONNECTED
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    EAPOL: External notification - portEnabled=0
    EAPOL: SUPP_PAE entering state DISCONNECTED
    EAPOL: SUPP_BE entering state INITIALIZE
    EAPOL: External notification - portValid=0
    EAPOL: External notification - EAP success=0
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan requested (ret=0) - scan timeout 30 seconds
    dmesg | tail

    Code:
    [  270.251568] wlan0: disassociating by local choice (reason=3)
    [  270.253370] wlan0: deauthenticated
    [  281.095600] wlan0: authenticate with AP 00:21:91:18:d4:2e
    [  281.098335] wlan0: authenticate with AP 00:21:91:18:d4:2e
    [  281.098351] wlan0: authenticated
    [  281.098355] wlan0: associate with AP 00:21:91:18:d4:2e
    [  281.106980] wlan0: RX ReassocResp from 00:21:91:18:d4:2e (capab=0x431 status=0 aid=1)
    [  281.106985] wlan0: associated
    [  281.110364] wlan0: disassociating by local choice (reason=3)
    [  281.112672] wlan0: deauthenticated
    Hey, you created me. I didn't create some loser alter-ego to make myself feel better. Take some responsibility! -Tyler Durden, Fight Club

  8. #898
    Join Date
    Mar 2007
    Location
    Denver, CO
    Beans
    7,649
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: How To: Manual Network Configuration without the need for Network Manager

    This problem you are having is all over the place on the web

    Its a conflict with the kernel and the ipw driver.

    Ive seen one option recommend this:

    It is to add the following line:

    Code:

    options iwl3945 disable_hw_scan=1

    to the file:

    Code:

    /etc/modprobe.conf

    You may have to create the file owned by root if it doesn't exist for you.

    Another way to accomplish the above exact same thing is given here:
    http://blog.dotkam.com/2008/11/17/co...ver-on-ubuntu/

    I hate intel chipsets because Ive found them to be quite buggy.
    Another option for you is to reboot, and then selecting a different kernel at the grub menu. Its possibly a kernel problem and with the stock ubuntu install there are usually 2 different kernel versions included in the instal..

  9. #899
    Join Date
    Dec 2007
    Location
    Chicago
    Beans
    Hidden!

    Re: How To: Manual Network Configuration without the need for Network Manager

    Quote Originally Posted by kevdog View Post
    This problem you are having is all over the place on the web

    Its a conflict with the kernel and the ipw driver.

    Ive seen one option recommend this:

    It is to add the following line:

    Code:

    options iwl3945 disable_hw_scan=1

    to the file:

    Code:

    /etc/modprobe.conf

    You may have to create the file owned by root if it doesn't exist for you.

    Another way to accomplish the above exact same thing is given here:
    http://blog.dotkam.com/2008/11/17/co...ver-on-ubuntu/

    I hate intel chipsets because Ive found them to be quite buggy.
    Another option for you is to reboot, and then selecting a different kernel at the grub menu. Its possibly a kernel problem and with the stock ubuntu install there are usually 2 different kernel versions included in the instal..
    Well those options didn't work. It's just kinda frustrating that I can connect just fine with network manager(which uses the iwl3945) but I can't do it from command line. Thanks for the help though, I appreciate the time you spent.
    Hey, you created me. I didn't create some loser alter-ego to make myself feel better. Take some responsibility! -Tyler Durden, Fight Club

  10. #900
    Join Date
    Mar 2007
    Location
    Denver, CO
    Beans
    7,649
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: How To: Manual Network Configuration without the need for Network Manager

    Sorry those suggestions didn't work. I have no real experience with Intel Chipsets but likely will soon.

Page 90 of 98 FirstFirst ... 40808889909192 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •