Page 47 of 99 FirstFirst ... 3745464748495797 ... LastLast
Results 461 to 470 of 981

Thread: How To: Manual Network Configuration without the need for Network Manager

  1. #461
    Join Date
    Aug 2007
    Beans
    6

    Question Re: How To: Manual Network Configuration without the need for Network Manager

    I have a bit of a different problem. 8.04 installed without a hitch. AR5006EX recognized and installed no problem. But I got curious and decided to use ndiswrapper as an experiment. Installed ndiswrapper through Synaptic, then downloaded zip file from atheros site. Disabled HAL and Atheros support from restricted drivers support. Rebooted. Navigated to the inf file with ndiswrapper gui and used that driver.

    Now I want to revert to the original setup. Uninstall ndiswrapper. Reboot. Enable HAL and Atheros support. Reboot. When I click on the network icon there is no option for "enable wireless networking".

    Here is the state of my affairs:
    Code:
    scrib@dell-laptop:~$ sudo lshw -C network
    [sudo] password for scrib: 
      *-network UNCLAIMED     
           description: Ethernet controller
           product: AR242x 802.11abg Wireless PCI Express Adapter
           vendor: Atheros Communications Inc.
           physical id: 0
           bus info: pci@0000:0b:00.0
           version: 01
           width: 64 bits
           clock: 33MHz
           capabilities: pm msi pciexpress msix bus_master cap_list
           configuration: latency=0
    My wireless does not even have an ID. What do I do to enable wireless networking again? In the restricted drivers panel even both boxes are checked as 'enabled" the line following says, "Not in use" and has a red button. How do I put them into use?

    Thanks in advance.

  2. #462
    Join Date
    Apr 2008
    Beans
    8

    Re: How To: Manual Network Configuration without the need for Network Manager

    Help me please, I am a MS-Dos expert; however, a newbe at all Linux systems.

    Question One: Is there a way I can let you, or someone accessed my "wired" system to configure, test, and resolve my "wireless less" issues?
    Since it is a new and clean system I have nothing to protect...

    Question Two: I would like to have Wireless, is it possible to have Wireless internet actually work on Ubuntu, using a choice between my internal PRO/Wireless 2915ABG for normal internet and then later
    using DLink DWL-AG660 and I have a DWL-G650 when I feel like putting WireShark to work.

    My system is as follows:
    I had a working internet; however, after I finished upgrading to Ubuntu released April 29 8.02 on a Dual boot Windows XP Pro System; and after
    I changed my system to connect to the Dlink router via WPA, all wireless internet failed me. I can't even see a "Interface" in my choices within WireShark.

    The Computer is a 17 inch Toshiba M60 and I would like to configure this computer to use the following Wireless interfaces:

    Cardbus
    DLink DWL-AG660 and I have a DWL-G650 which could be used for testing
    both of which I believe use "Atheros"

    Internal
    Intel Corporation PRO/Wireless 2915ABG

    Attached to a Dlink Router DI-624 which is configured as follows:
    http://192.168.0.1/
    SSID: greyspace
    Channel: Auto Select
    Super G Mode: Disabled (as I found less drops on Internal card)
    Extended Range: Enabled
    WMM Function: Enabled
    802.11g Only mode: Enabled
    SSID Broadcast: Enabled
    Security: WPA personal
    Cipher type: TKIP
    PSK/EAP: PSK
    Passphrase: dynamicXXXXX

    The Goal
    Is to use Ubuntu to program MicroChips.com devices and
    enjoy Wireshark type software as I am interested in Electronics and
    Computers related knowledge.

    Email (nospaces just as it reads)
    sir douglas cook 2004 at hotmail dot com

    Confused with
    Instructions never tell you how to; or where to install the package
    or what to do when unpacking, making, installing a Tar. Which my results almost alway end with a mess of errors.

    So I figure my error has to do with un-installing something before I could re-install it and the re-install bombed leaving me with component missing within my Ubuntu system.

    What I have discovered, short version:

    I have Internet via a Internet cable
    And after typing a ton of commands
    I was to UNPlug the Internet cable and use a undetermined Wireless
    Which all disappeared after a reboot.

    When I was Wireless the, "network manager"
    and the "wireshark" couldn't show a the "Interface" and hence
    wouldn't work.
    --------------------------------------------------------------------------

    Points to Ponder
    ================================================== ========================
    as root administrator
    # lshw -C network
    Showed that the driver is missing
    for PRO/Wireless 2915ABG Network Connection
    also note: network:1 UNCLAIMED
    physical id: 0
    and
    # ifconfig
    shows that eth0, wifi0 doesn't have an ip address assigned to the device.

    and
    # dhclient
    wifi0: unknown hardware address type 801
    No DHCPOFFERS received.

    and
    ping -c 4 212.58.224.131
    ping -c 4 bbc.co.uk
    both work with no packet loss.

    and
    After a REBOOT I have no wireless .... again arrrrrrrrrrg
    ================================================== ========================

    P.S.
    I wish someone could just search my computer remotely and just fix it so that I can use wireless.

    That said, many thanks for any help offered.

    Grey.

  3. #463
    Join Date
    Mar 2007
    Location
    Denver, CO
    Beans
    7,554
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: How To: Manual Network Configuration without the need for Network Manager

    Sounds like your question is really related to a driver issue with your intel wireless card. Im not an expert in intel chipsets.

  4. #464
    Join Date
    Apr 2008
    Beans
    8

    Re: How To: Manual Network Configuration without the need for Network Manager

    I scrapped my total Ubuntu, and re-installed Ubuntu as I just don't know enough to decipher the tons of information relating to Networks, and figure what parts of that information would help me.

    I know Ubuntu would be so easy if I just knew a couple of people in London Ontario that understood it.

    Later,

    Grey

  5. #465
    Join Date
    Sep 2007
    Location
    Midwest
    Beans
    18
    Distro
    Ubuntu 9.10 Karmic Koala

    Lightbulb Re: How To: Manual Network Configuration without the need for Network Manager

    This thread has been brilliant and informative when tackling the issue of what seems to be a black hole with UBUNTU, WIRELESS DRIVERS AND NETWORK MANAGER. Qudos to Kevdog!!!
    =D>

  6. #466
    Join Date
    Oct 2007
    Beans
    72
    Distro
    Ubuntu 7.10 Gutsy Gibbon

    Re: How To: Manual Network Configuration without the need for Network Manager

    Any clue what could cause this?

    sudo wpa_supplicant -w -D wext -i wlan0 -c/etc/wpa_supplicant.conf

    gives this output:

    Code:
    Trying to associate with 00:12:bf:2e:74:02 (SSID='Mynetwork' freq=2452 MHz)
    Authentication with 00:00:00:00:00:00 timed out.
    Trying to associate with 00:12:bf:2e:74:02 (SSID='Mynetwork' freq=2452 MHz)
    Authentication with 00:00:00:00:00:00 timed out.
    Trying to associate with 00:12:bf:2e:74:02 (SSID='Mynetwork' freq=2452 MHz)
    Authentication with 00:00:00:00:00:00 timed out.
    it goes on like that forever.

    I'm using a wg111v2 with ndiswrapper and the win98 driver from majorgeeks, this worked like a charm on gutsy (didn't even have to connect at the command line, wicd would do the job just fine), but the same method I used to get it working on gutsy doesn't seem to work on hardy for some reason. So I tried your guide to troubleshoot it better. Any idea what could be causeing the above output? I'm using wpa with tkip.

    I also tried your guide with the native rtl8187 driver just to compare, and it connected and got an IP and everything. (but the rtl8187 only stays connected for 10seonds at a time though, so it's useless, that's why I'm trying to make my wg111v2 work with ndiswrapper)

  7. #467
    Join Date
    Mar 2007
    Location
    Denver, CO
    Beans
    7,554
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: How To: Manual Network Configuration without the need for Network Manager

    sennep

    Could you post your wpa_supplicant.conf file along with using this as your syntax:

    sudo wpa_supplicant -w -D wext -i wlan0 -c/etc/wpa_supplicant.conf -dd

  8. #468
    Join Date
    Oct 2007
    Beans
    72
    Distro
    Ubuntu 7.10 Gutsy Gibbon

    Re: How To: Manual Network Configuration without the need for Network Manager

    Here's the wpa_supplicant.conf:

    Code:
    ap_scan=1
    ctrl_interface=/var/run/wpa_supplicant 
    
    network={
            ssid="Mynetwork"
            scan_ssid=0
            proto=WPA
            key_mgmt=WPA-PSK
            psk="mysecretpass"
            pairwise=TKIP
            group=TKIP
    }

    And the sudo wpa_supplicant -w -D wext -i wlan0 -c/etc/wpa_supplicant.conf -dd gives a horribly long output:

    Code:
    sennep@sennepdata:~$ sudo ifconfig wlan0 down
    sennep@sennepdata:~$ sudo dhclient -r wlan0
    Internet Systems Consortium DHCP Client V3.0.6
    Copyright 2004-2007 Internet Systems Consortium.
    All rights reserved.
    For info, please visit http://www.isc.org/sw/dhcp/
    
    Listening on LPF/wlan0/00:14:6c:a7:f1:9c
    Sending on   LPF/wlan0/00:14:6c:a7:f1:9c
    Sending on   Socket/fallback
    sennep@sennepdata:~$ sudo wpa_supplicant -w -D wext -i wlan0 -c/etc/wpa_supplicant.conf -dd
    Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
    Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
    Reading configuration file '/etc/wpa_supplicant.conf'
    ap_scan=1
    ctrl_interface='/var/run/wpa_supplicant'
    Line: 4 - start of a new network block
    ssid - hexdump_ascii(len=7):
         52 69 63 68 61 72 64                              Mynetwork         
    scan_ssid=0 (0x0)
    proto: 0x1
    key_mgmt: 0x2
    PSK (ASCII passphrase) - hexdump_ascii(len=12): [REMOVED]
    pairwise: 0x8
    group: 0x8
    PSK (from passphrase) - hexdump(len=32): [REMOVED]
    Priority group 0
       id=0 ssid='Mynetwork'
    Initializing interface (2) 'wlan0'
    EAPOL: SUPP_PAE entering state DISCONNECTED
    EAPOL: KEY_RX entering state NO_KEY_RECEIVE
    EAPOL: SUPP_BE entering state INITIALIZE
    EAP: EAP entering state DISABLED
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    SIOCGIWRANGE: WE(compiled)=22 WE(source)=18 enc_capa=0xf
      capabilities: key_mgmt 0xf enc 0xf
    WEXT: Operstate: linkmode=1, operstate=5
    Own MAC address: 00:14:6c:a7:f1:9c
    wpa_driver_wext_set_wpa
    wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_countermeasures
    wpa_driver_wext_set_drop_unencrypted
    Setting scan request: 0 sec 100000 usec
    Added interface wlan0
    RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
    Wireless event: cmd=0x8b06 len=8
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Trying to get current scan results first without requesting a new scan to speed up initial association
    Received 385 bytes of scan results (2 BSSes)
    Scan results: 2
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    0: 00:12:bf:2e:74:02 ssid='Mynetwork' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
       skip - no WPA/RSN IE
    1: 00:c0:02:ef:db:b0 ssid='wireless' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
       skip - no WPA/RSN IE
    Try to find non-WPA AP
    0: 00:12:bf:2e:74:02 ssid='Mynetwork' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
       skip - non-WPA network not allowed
    1: 00:c0:02:ef:db:b0 ssid='wireless' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
       skip - SSID mismatch
    No suitable AP found.
    Setting scan request: 0 sec 0 usec
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 451 bytes of scan results (2 BSSes)
    Scan results: 2
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    0: 00:12:bf:2e:74:02 ssid='Mynetwork' wpa_ie_len=28 rsn_ie_len=22 caps=0x11
       selected based on WPA IE
       selected WPA AP 00:12:bf:2e:74:02 ssid='Mynetwork'
    Try to find non-WPA AP
    Trying to associate with 00:12:bf:2e:74:02 (SSID='Mynetwork' freq=2452 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
    WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
    WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 01 00
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    wpa_driver_wext_set_drop_unencrypted
    State: SCANNING -> ASSOCIATING
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    wpa_driver_wext_associate
    Setting authentication timeout: 10 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    RSN: added PMKSA cache candidate 00:12:bf:2e:74:02 prio 1000
    RSN: processing PMKSA candidate list
    RSN: not in suitable state for new pre-authentication
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b06 len=8
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b04 len=12
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b1a len=15
    Authentication with 00:00:00:00:00:00 timed out.
    Added BSSID 00:12:bf:2e:74:02 into blacklist
    No keys have been configured - skip key clearing
    State: ASSOCIATING -> DISCONNECTED
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    EAPOL: External notification - EAP success=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 451 bytes of scan results (2 BSSes)
    Scan results: 2
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    0: 00:12:bf:2e:74:02 ssid='Mynetwork' wpa_ie_len=28 rsn_ie_len=22 caps=0x11
       skip - blacklisted
    1: 00:c0:02:ef:db:b0 ssid='wireless' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
       skip - no WPA/RSN IE
    Try to find non-WPA AP
    0: 00:12:bf:2e:74:02 ssid='Mynetwork' wpa_ie_len=28 rsn_ie_len=22 caps=0x11
       skip - blacklisted
    1: 00:c0:02:ef:db:b0 ssid='wireless' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
       skip - SSID mismatch
    No APs found - clear blacklist and try again
    Removed BSSID 00:12:bf:2e:74:02 from blacklist (clear)
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    0: 00:12:bf:2e:74:02 ssid='Mynetwork' wpa_ie_len=28 rsn_ie_len=22 caps=0x11
       selected based on WPA IE
       selected WPA AP 00:12:bf:2e:74:02 ssid='Mynetwork'
    Try to find non-WPA AP
    Trying to associate with 00:12:bf:2e:74:02 (SSID='Mynetwork' freq=2452 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
    WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
    WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 01 00
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    wpa_driver_wext_set_drop_unencrypted
    State: SCANNING -> ASSOCIATING
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    wpa_driver_wext_associate
    Setting authentication timeout: 10 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    RSN: added PMKSA cache candidate 00:12:bf:2e:74:02 prio 1000
    RSN: processing PMKSA candidate list
    RSN: not in suitable state for new pre-authentication
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b06 len=8
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b04 len=12
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b1a len=15
    Authentication with 00:00:00:00:00:00 timed out.
    Added BSSID 00:12:bf:2e:74:02 into blacklist
    No keys have been configured - skip key clearing
    State: ASSOCIATING -> DISCONNECTED
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    EAPOL: External notification - EAP success=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 451 bytes of scan results (2 BSSes)
    Scan results: 2
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    0: 00:12:bf:2e:74:02 ssid='Mynetwork' wpa_ie_len=28 rsn_ie_len=22 caps=0x11
       selected based on WPA IE
       selected WPA AP 00:12:bf:2e:74:02 ssid='Mynetwork'
    Try to find non-WPA AP
    Trying to associate with 00:12:bf:2e:74:02 (SSID='Mynetwork' freq=2452 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
    WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
    WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 01 00
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    wpa_driver_wext_set_drop_unencrypted
    State: SCANNING -> ASSOCIATING
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    wpa_driver_wext_associate
    Setting authentication timeout: 10 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    RSN: added PMKSA cache candidate 00:12:bf:2e:74:02 prio 1000
    RSN: processing PMKSA candidate list
    RSN: not in suitable state for new pre-authentication
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b06 len=8
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b04 len=12
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b1a len=15
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:12:bf:2e:74:02 blacklist count incremented to 2
    No keys have been configured - skip key clearing
    State: ASSOCIATING -> DISCONNECTED
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    EAPOL: External notification - EAP success=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 451 bytes of scan results (2 BSSes)
    Scan results: 2
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    0: 00:12:bf:2e:74:02 ssid='Mynetwork' wpa_ie_len=28 rsn_ie_len=22 caps=0x11
       skip - blacklisted
    1: 00:c0:02:ef:db:b0 ssid='wireless' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
       skip - no WPA/RSN IE
    Try to find non-WPA AP
    0: 00:12:bf:2e:74:02 ssid='Mynetwork' wpa_ie_len=28 rsn_ie_len=22 caps=0x11
       skip - blacklisted
    1: 00:c0:02:ef:db:b0 ssid='wireless' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
       skip - SSID mismatch
    No APs found - clear blacklist and try again
    Removed BSSID 00:12:bf:2e:74:02 from blacklist (clear)
    Selecting BSS from priority group 0
    Try to find WPA-enabled AP
    0: 00:12:bf:2e:74:02 ssid='Mynetwork' wpa_ie_len=28 rsn_ie_len=22 caps=0x11
       selected based on WPA IE
       selected WPA AP 00:12:bf:2e:74:02 ssid='Mynetwork'
    Try to find non-WPA AP
    Trying to associate with 00:12:bf:2e:74:02 (SSID='Mynetwork' freq=2452 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
    WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
    WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 01 00
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    wpa_driver_wext_set_drop_unencrypted
    State: SCANNING -> ASSOCIATING
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    wpa_driver_wext_associate
    Setting authentication timeout: 10 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    RSN: added PMKSA cache candidate 00:12:bf:2e:74:02 prio 1000
    RSN: processing PMKSA candidate list
    RSN: not in suitable state for new pre-authentication
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b06 len=8
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b04 len=12
    RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
    Wireless event: cmd=0x8b1a len=15
    Authentication with 00:00:00:00:00:00 timed out.
    Added BSSID 00:12:bf:2e:74:02 into blacklist
    No keys have been configured - skip key clearing
    State: ASSOCIATING -> DISCONNECTED
    wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
    WEXT: Operstate: linkmode=-1, operstate=5
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    EAPOL: External notification - EAP success=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    And it just keeps going and going...

  9. #469
    Join Date
    Mar 2007
    Location
    Denver, CO
    Beans
    7,554
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: How To: Manual Network Configuration without the need for Network Manager

    Remove the ap_scan and scan_ssid lines to see if it makes a difference. The output will go on for ever with the -dd flag, break with Cntl-C. It gives some useful output however.

  10. #470
    Join Date
    Sep 2007
    Location
    Missouri, USA
    Beans
    89
    Distro
    Ubuntu 10.04 Lucid Lynx

    Exclamation Re: How To: Manual Network Configuration without the need for Network Manager

    Thanks for the great guide, first of all. I did, however, find one hair-yanking typo in one of the sections that I needed, Static IP's. I guess no one else has needed this section as the guide has been here awhile (or maybe there's a workaround that I missed in another section).

    Being a newbie, I tend to follow guides line for line, and only research when necessary. So, for two days I fiddled around with the Static IP section, as well as other guides, trying to figure out why I could get DHCP running but not Static.

    About an hour ago I landed on it: The last line in the Static IP section should not be there.

    Code:
    sudo dhclient <interface>
    This apparently restarts the DHCP client and erases any Static settings that you have entered. Since my DHCP was switched off on my router, the client reset the IP to the 169 addy.

    Once I spotted this, I reentered the info per the guide, leaving off the last line, and Walla! Instant successfull connection!

    Oh,.........not quite....JFTR, I had to use apt to remove network-manager and network-manager-gnome because the manager was again resetting my manual settings and fouling everything up. (found that elsewhere.....not sure if it's in your guide) Hopefully this will be the end to my problems! That manager definitely needs some enhancement as it is way too limiting and a major PITB!

Page 47 of 99 FirstFirst ... 3745464748495797 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •