Good idea!Kisses Ida
Good idea!Kisses Ida
Last edited by idea; April 27th, 2006 at 07:48 PM.
Great guide!Bravo Alberto!Ida
Well, I look at the dri.log file to see what's going on and I found this.
make DRM_MODULES=i915.o modules
make[1]: Entering directory `/home/krotaz/software/video card/i915-20060403-linux.i386/drm/linux-core'
+ ln -s ../shared-core/drm.h drm.h
+ ln -s ../shared-core/drm_sarea.h drm_sarea.h
+ ln -s ../shared-core/mga_dma.c mga_dma.c
+ ln -s ../shared-core/mga_drm.h mga_drm.h
+ ln -s ../shared-core/mga_drv.h mga_drv.h
+ ln -s ../shared-core/mga_irq.c mga_irq.c
+ ln -s ../shared-core/mga_state.c mga_state.c
+ ln -s ../shared-core/mga_ucode.h mga_ucode.h
+ ln -s ../shared-core/mga_warp.c mga_warp.c
+ ln -s ../shared-core/r128_drv.h r128_drv.h
+ ln -s ../shared-core/r128_drm.h r128_drm.h
+ ln -s ../shared-core/r128_cce.c r128_cce.c
+ ln -s ../shared-core/r128_state.c r128_state.c
+ ln -s ../shared-core/r128_irq.c r128_irq.c
+ ln -s ../shared-core/radeon_drv.h radeon_drv.h
+ ln -s ../shared-core/radeon_drm.h radeon_drm.h
+ ln -s ../shared-core/radeon_cp.c radeon_cp.c
+ ln -s ../shared-core/radeon_irq.c radeon_irq.c
+ ln -s ../shared-core/radeon_mem.c radeon_mem.c
+ ln -s ../shared-core/radeon_state.c radeon_state.c
+ ln -s ../shared-core/r300_cmdbuf.c r300_cmdbuf.c
+ ln -s ../shared-core/r300_reg.h r300_reg.h
+ ln -s ../shared-core/sis_drv.h sis_drv.h
+ ln -s ../shared-core/sis_drm.h sis_drm.h
+ ln -s ../shared-core/sis_ds.c sis_ds.c
+ ln -s ../shared-core/sis_ds.h sis_ds.h
+ ln -s ../shared-core/sis_mm.c sis_mm.c
+ ln -s ../shared-core/tdfx_drv.h tdfx_drv.h
+ ln -s ../shared-core/via_drm.h via_drm.h
+ ln -s ../shared-core/via_drv.h via_drv.h
+ ln -s ../shared-core/via_mm.h via_mm.h
+ ln -s ../shared-core/via_ds.h via_ds.h
+ ln -s ../shared-core/via_3d_reg.h via_3d_reg.h
+ ln -s ../shared-core/via_drv.c via_drv.c
+ ln -s ../shared-core/via_ds.c via_ds.c
+ ln -s ../shared-core/via_irq.c via_irq.c
+ ln -s ../shared-core/via_map.c via_map.c
+ ln -s ../shared-core/via_mm.c via_mm.c
+ ln -s ../shared-core/via_dma.c via_dma.c
+ ln -s ../shared-core/via_verifier.c via_verifier.c
+ ln -s ../shared-core/via_verifier.h via_verifier.h
+ ln -s ../shared-core/via_video.c via_video.c
+ ln -s ../shared-core/mach64_drv.h mach64_drv.h
+ ln -s ../shared-core/mach64_drm.h mach64_drm.h
+ ln -s ../shared-core/mach64_dma.c mach64_dma.c
+ ln -s ../shared-core/mach64_irq.c mach64_irq.c
+ ln -s ../shared-core/mach64_state.c mach64_state.c
+ ln -s ../shared-core/i915_drv.h i915_drv.h
+ ln -s ../shared-core/i915_drm.h i915_drm.h
+ ln -s ../shared-core/i915_irq.c i915_irq.c
+ ln -s ../shared-core/i915_mem.c i915_mem.c
+ ln -s ../shared-core/i915_dma.c i915_dma.c
+ ln -s ../shared-core/savage_drv.h savage_drv.h
+ ln -s ../shared-core/savage_drm.h savage_drm.h
+ ln -s ../shared-core/savage_bci.c savage_bci.c
+ ln -s ../shared-core/savage_state.c savage_state.c
+ ln -s ../shared-core/nv_drv.h nv_drv.h
rm -f linux
ln -s . linux
make -C /lib/modules/2.6.12-krotaz/source SUBDIRS=`pwd` DRMSRCDIR=`pwd` modules
make[2]: Entering directory `/usr/src/linux-source-2.6.12'
make[2]: *** No hay ninguna regla para construir el objetivo `card/i915-20060403-linux.i386/drm/linux-core'. Alto.
make[2]: Leaving directory `/usr/src/linux-source-2.6.12'
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/home/krotaz/software/video card/i915-20060403-linux.i386/drm/linux-core'
make: *** [i915.o] Error 2
Dont understand whats going on.
Plz help me.
Ok, since I am an Nvidia user and I've never had an Intel card, could you explain me what you did (step by step)?Originally Posted by krotaz
well I used this guide
http://www.frikis.org/staticpages/in...celeracion-dri
It's in spanish, don't know if you understand it but in few words says that I've to download the driver for my intel 830M chipset wichis supported by the driver provided by DRI in the i915 snapshot.
Then I put
sudo ./install.sh
1.-
DIRECT RENDERING OPEN SOURCE PROJECT - DRIVER INSTALLATION SCRIPT
[ http://dri.freedesktop.org ]
================================================== ========================
Welcome to the DRI Driver Installation Script
The package you downloaded is for the following driver:
Driver Name : i915
Description : Intel i915 Driver
Architecture :
Build Date : 20060403
Kernel Module : i915
Optional Information
Driver Version :
Special Description :
Press ENTER to continue or CTRL-C to exit.
2.-
DIRECT RENDERING OPEN SOURCE PROJECT - DRIVER INSTALLATION SCRIPT
[ http://dri.freedesktop.org ]
================================================== ========================
The script will need to copy the DRI Xorg driver modules to
your Xorg directories.
The script will use the following Xorg directories:
Xorg Dir : /usr/X11R6
Xorg Modules Dir : /usr/X11R6/lib/modules
Xorg Library Dir : /usr/X11R6/lib
If this is correct press ENTER, press C to change or CTRL-C to exit.
3.-
DIRECT RENDERING OPEN SOURCE PROJECT - DRIVER INSTALLATION SCRIPT
[ http://dri.freedesktop.org ]
================================================== ========================
The script also needs to copy the DRM kernel modules to your
kernel module directory.
This version of the script supports 2.4.x and 2.6.x kernels.
Kernel Version : 2.6.12-krotaz
Module Directory : /lib/modules/2.6.12-krotaz
If this is correct press ENTER, press C to change or CTRL-C to exit.
4.-
DIRECT RENDERING OPEN SOURCE PROJECT - DRIVER INSTALLATION SCRIPT
[ http://dri.freedesktop.org ]
================================================== ========================
The script will now compile the DRM kernel modules for your machine.
Press ENTER to continue or CTRL-C to exit.
5.-
Compiling...
ERROR: Kernel modules did not compile
The DRI drivers can not be installed without the latest kernel modules.
Installation will be aborted. See the dri.log file for information on
what went wrong.
krotaz@calzonzin:~/software/video card/i915-20060403-linux.i386$
those are the 5 screens that the driver install show.
The DRI.log file is the one I posted before
Thanks
Yo también hablo español como soy estudiante de lenguas extranjerasOriginally Posted by krotaz
Try to boot in the default Ubuntu kernel (select it in the grub menu) and run the script.
And tell me how it goes.
q bueno q tambien hables español, pero dime en q idioma te acomodas mas para en ese escribir, de momento voy a asumir q prefieres en ingles
Ok. I changed the kernel and try the script
after all the questions the same error. and also to check dri.log
the dri.log changed this time for this
Makefile: 173: *** Cannot find a kernel config file
Now I'm back to the other kernel because my wireless card is compiled for my new kernel
any other idea???
Sí, mejor que hablemos en inglés, así que los demás nos entiendan.Originally Posted by krotaz
Ok, you're back to your new kernel.
Try this:
Make a backup of the config fileCode:cd /usr/src/linux-source*
Code:sudo cp .config .tentativoAnd try the script againCode:sudo make oldconfig
I've done what you asked me to and the same error and suggestion to check the dri.log
the dri.log has the same message that in the first time
-------------------------------------
make DRM_MODULES=i915.o modules
make[1]: Entering directory `/home/krotaz/software/video card/i915-20060403-linux.i386/drm/linux-core'
make -C /lib/modules/2.6.12-krotaz/source SUBDIRS=`pwd` DRMSRCDIR=`pwd` modules
make[2]: Entering directory `/usr/src/linux-source-2.6.12'
make[2]: *** No hay ninguna regla para construir el objetivo `card/i915-20060403-linux.i386/drm/linux-core'. Alto.
make[2]: Leaving directory `/usr/src/linux-source-2.6.12'
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/home/krotaz/software/video card/i915-20060403-linux.i386/drm/linux-core'
make: *** [i915.o] Error 2
-------
Bookmarks